whitequark
a39f8d6634
artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt.
...
(Which no longer exists.)
This also fixes `artiq_devtool hotswap` to work without
an `artiq_devtool connect` running in background.
2018-05-16 14:08:32 +00:00
whitequark
d446a3293e
frontend: merge core{config,log,boot,debug,profile} into coremgmt.
2018-05-16 14:08:32 +00:00
Florent Kermarrec
f77bcbebb5
serwb/test_serwb_core: fix
2018-05-16 08:34:53 +02:00
Florent Kermarrec
77fc5c599f
serwb/test: update
2018-05-15 23:52:58 +02:00
Florent Kermarrec
3873d09692
serwb: rewrite high-speed phys by splitting clocking/tx/rx, scrambling is now always enabled.
2018-05-15 23:52:41 +02:00
Florent Kermarrec
f8a9dd930b
serwb/genphy: add device parameter (not used here, but this way all the phys share the same parameters), scrambling is also now always enabled.
2018-05-15 23:51:14 +02:00
Florent Kermarrec
2c627cd061
serwb/scrambler: simplify and set scrambler input data to 0 when sink.stb == 0
2018-05-15 23:49:17 +02:00
Florent Kermarrec
7fe49a78d2
firmware/runtime/session: fix compilation when no rtio core
2018-05-15 23:47:47 +02:00
whitequark
8128a814f6
firmware: update dependencies.
2018-05-15 18:17:32 +00:00
whitequark
1b0384c513
firmware: fix satman build.
2018-05-15 16:35:05 +00:00
whitequark
07b713fdad
firmware: use upstream log_buffer.
2018-05-15 15:19:20 +00:00
whitequark
9f5b76253c
firmware: remove some unnecessary unwraps.
2018-05-15 15:05:19 +00:00
whitequark
e5796e26e1
firmware: remove unused #![feature(untagged_unions)].
2018-05-15 15:05:19 +00:00
whitequark
b54926134c
firmware: update the signature of #[lang="panic_fmt"].
2018-05-15 15:05:19 +00:00
Florent Kermarrec
c18a73d45f
sayma_amc/rtm: use new serwb low-speed phy
2018-05-15 16:40:50 +02:00
Florent Kermarrec
913d1e8e12
serwb: add generic low-speed phy (125Mhz linerate, same phy for ultrascale/7-series)
2018-05-15 16:39:39 +02:00
Florent Kermarrec
520aade8fe
serwb/scrambler: cleanup/fix potential bug
2018-05-15 16:30:52 +02:00
whitequark
9347f6e00c
firmware: use a dedicated error type in the scheduler.
...
After this commit, error handling does not normally allocate
(session::Error::{Load,Unexpected} still allocate, but those two
are very rare).
Good riddance to libstd_artiq.
2018-05-15 14:19:44 +00:00
whitequark
479cb9a857
firmware: use dedicated error types for every protocol and thread.
...
Good riddance to io::Error::Unrecognized.
2018-05-15 13:27:23 +00:00
whitequark
514eab3d39
Update Rust to 1.26.0.
2018-05-15 12:47:51 +00:00
whitequark
26faaad2b7
firmware: remove io::Result<T, E> in favor of Result<T, impl Fail>.
...
This doesn't yet use impl Fail since std_artiq::io::Error doesn't
impl it.
2018-05-15 08:29:03 +00:00
whitequark
140ca729aa
firmware: rename io::Error::{UnexpectedEof→UnexpectedEnd}.
...
We don't even have files.
2018-05-15 08:27:45 +00:00
whitequark
ce0593315b
firmware: move {ProtoRead,ProtoWrite} to the root of libio.
2018-05-15 08:16:09 +00:00
whitequark
4416c04ae1
firmware: use the failure crate in libio.
2018-05-15 07:40:13 +00:00
whitequark
9e8f8bb669
firmware: extract io::Cursor into its own file.
...
Also remove unused io::CursorError.
2018-05-15 06:24:04 +00:00
whitequark
a4ab236af3
firmware: simplify some uses.
2018-05-14 19:24:14 +00:00
whitequark
d93aa13fd6
firmware: use upstream compiler_builtins again.
...
I've fixed i128 in LLVM, so there is no need in our fork anymore.
2018-05-14 19:11:57 +00:00
whitequark
5ead27f2e1
firmware: eliminate uses of std_artiq::io::{Read,Write} from runtime.
2018-05-14 19:11:57 +00:00
whitequark
cf33ba748d
firmware: eliminate non-io uses of std_artiq from runtime.
...
Just replace these with references to alloc.
2018-05-14 19:11:57 +00:00
a100c73dfe
suservo: support pure-I
2018-05-14 18:48:27 +00:00
whitequark
ae50196186
firmware: rename libproto to libproto_artiq.
...
libproto_artiq only has ARTIQ-specific protocols.
2018-05-14 18:09:44 +00:00
whitequark
02b8426f60
firmware: rename libboard to libboard_misoc.
...
By analogy with libbuild_misoc. Hopefully one day it actually gets
moved to misoc...
2018-05-14 18:09:44 +00:00
whitequark
1ff42683d9
firmware: merge libamp into libboard_artiq.
...
All gateware interfaces live in libboard_artiq, but libamp predates
libboard_artiq.
2018-05-14 17:33:25 +00:00
whitequark
764386c9e3
firmware: split libdrtioaux into libproto and libboard_artiq modules.
...
All other protocol code lives in libproto, and all other gateware
interfaces live in libboard_artiq.
2018-05-14 17:26:59 +00:00
whitequark
6a10d54432
firmware: migrate rpc_proto to new libio.
...
This closes an old and horrible issue in that some code in ksupport
may implicitly try to allocate and we'll never know until it crashes
at runtime inside liballoc_stub.
This also removes liballoc_stub.
This also removes ReadExt and WriteExt from libproto.
Hooray!
2018-05-14 17:26:59 +00:00
whitequark
9a1bd66d2c
compiler: add test for int64(round(1.0)).
2018-05-14 15:57:27 +00:00
e121a81f21
ad9914: fix frequency_to_xftw and xftw_to_frequency
2018-05-14 23:49:00 +08:00
80df86f700
ad9914: set_mu_x -> set_x_mu
2018-05-14 23:49:00 +08:00
whitequark
09617c9f5e
firmware: migrate session_proto to new libio.
2018-05-14 15:17:32 +00:00
whitequark
e9c88e32e6
firmware: migrate moninj_proto to new libio.
2018-05-14 15:17:32 +00:00
whitequark
e292c8ab65
firmware: migrate mgmt_proto to new libio.
2018-05-14 15:17:32 +00:00
0c1caf0744
suservo: clean up and beautify example
2018-05-14 15:22:47 +02:00
4ddb29fa02
suservo: document class arguments
2018-05-14 15:22:47 +02:00
whitequark
976bb5e935
firmware: migrate analyzer_proto to new libio.
2018-05-14 12:51:59 +00:00
whitequark
2999756493
firmware: impl std_artiq::io::{Read,Write} for io::{Read,Write}.
2018-05-14 12:51:59 +00:00
whitequark
bfc8fd0807
firmware: add io::Error::Unrecognized variant and use it in drtioaux.
2018-05-14 12:51:59 +00:00
504d37b66b
suservo: add SI units functions and document
...
m-labs/artiq#788
2018-05-14 12:26:49 +00:00
4993ceec35
sampler: unroll conversion for speed
2018-05-14 12:26:49 +00:00
d71e4e60a9
suservo: use addition for offset
2018-05-14 12:26:49 +00:00
27f975e7bb
kasli: eem DifferentialInputs need DIFF_TERM
...
cleanup some formatting on the way
2018-05-14 12:26:49 +00:00
2a47b934ea
suservo: remove adc return clock gating
2018-05-14 12:26:49 +00:00
74c0b4452b
suservo: clkout and sdo[b-d] are inverted
2018-05-14 12:26:49 +00:00
04240cdc08
suservo: sampler channels are reversed
2018-05-14 12:25:09 +00:00
whitequark
7e299563df
firmware: mark many functions in libio as #[inline].
2018-05-14 11:22:56 +00:00
whitequark
368d6f9bfb
satman: remove useless _Unwind_Resume.
2018-05-14 11:22:56 +00:00
whitequark
42420e094a
satman: don't unwrap so much in process_aux_packet.
...
This shrinks the code by almost 4K.
2018-05-14 11:22:56 +00:00
ba1d137d19
ad9914: fix FTW write in regular resolution mode
2018-05-14 18:47:23 +08:00
whitequark
56a29b91fc
firmware: implement ConsoleLogger, use it in satman.
2018-05-14 10:45:11 +00:00
whitequark
5d43d457d2
satman: eliminate heap.
2018-05-14 10:05:02 +00:00
whitequark
46c8afc56c
firmware: implement libio and use in in drtioaux.
2018-05-14 10:02:39 +00:00
whitequark
d543c9aa63
firmware: backtrace_artiq → unwind_backtrace.
...
This crate isn't ARTIQ-specific.
2018-05-14 07:33:00 +00:00
b04c7abde8
ad9914: fix kernel_invariants
2018-05-14 14:02:11 +08:00
56a18682a7
ad9914: minor fixes
2018-05-14 10:37:50 +08:00
194d6462ee
ad9914: fix set_mu
2018-05-14 00:19:09 +08:00
hartytp
00cb31b804
sampler: remove v_ref parameter ( #988 )
2018-05-13 18:00:57 +02:00
3027951dd8
integrate new AD9914 driver
...
moninj, analyzer, docs, examples, tests.
2018-05-13 23:29:35 +08:00
663d8e66ba
ad9914: optimize extended-resolution mode
2018-05-13 23:01:06 +08:00
c8d91b297d
coredevice: add new ad9914 driver
2018-05-13 22:30:33 +08:00
whitequark
f383a470fe
satman: do not debug print unexpected aux packets.
...
This shrinks firmware by 2.8K.
2018-05-13 13:43:39 +00:00
whitequark
aa42a69849
libdrtioaux: always inline read/write helpers.
...
This shrinks Packet::{read_from,write_to} by 1K.
2018-05-13 13:39:14 +00:00
whitequark
32522be413
satman: use 1K log buffer and 4K stack.
...
This reduces memory requirements in half.
2018-05-13 13:28:00 +00:00
whitequark
ee4c475cf3
gateware: fix Sayma satellite build.
...
RTIO clock multiplier was removed from Sayma in 32f22f4c
2018-05-13 13:10:39 +00:00
8c1390e557
kasli: use 62.5MHz clock for siphaser reference ( #999 )
2018-05-12 22:58:03 +08:00
2426fea3f2
siphaser: support external reference for the freerunning 150MHz
2018-05-12 22:57:11 +08:00
6796413a53
serwb: remove unnecessary shebang line
2018-05-12 22:49:44 +08:00
Florent Kermarrec
f5208ff2f3
serwb/core: reduce buffering, use buffered=True
2018-05-12 12:03:58 +02:00
Florent Kermarrec
fdc953e569
serwb/etherbone: recuce buffering
2018-05-12 12:03:11 +02:00
Florent Kermarrec
6e67e6d0b1
serwb: revert some changes (was breaking simulation)
2018-05-12 11:59:46 +02:00
Florent Kermarrec
0a6d4ccd85
serwb/phy: improve/cleanup init
2018-05-12 01:35:34 +02:00
Florent Kermarrec
b6ab59fb80
serwb/phy: increase timeout
2018-05-12 01:32:55 +02:00
Florent Kermarrec
e09dbc89bc
serwb: remove idelaye3 en_vtc (was not done correctly, we'll add direct software control)
2018-05-12 01:32:16 +02:00
Florent Kermarrec
6b4bbe31f7
firmware/ad9154: use fixed hmc7043 sysref phase (found with scan)
2018-05-12 00:12:59 +02:00
Florent Kermarrec
3c49eba0a0
firmware/hmc830_7043: put hmc7043 in sleep mode before hmc830 initialization
...
hmc7043 seems to generate broadband noise when not initialized. This allows isolating issues. If hmc830 still does not always lock correctly, then this is not related to hmc7043 broadband noise.
2018-05-12 00:06:49 +02:00
Florent Kermarrec
cd4477864a
serwb: fix case when rtm fpga is not loaded, lvds input can be 0 or 1
2018-05-11 23:31:25 +02:00
2e3bf8602f
serwb: reduce buffering. Closes #997
2018-05-11 14:13:41 +08:00
2cece47b10
firmware/si5324: fix compilation warning
2018-05-09 20:00:08 +08:00
6b811c1a8b
sayma: fix runtime/rtm gateware address conflict
2018-05-09 19:47:29 +08:00
Florent Kermarrec
9de08f85c6
firmware/ad9154: reduce verbosity of dac_sysref_cfg
2018-05-09 10:57:00 +02:00
f055bf88f6
suservo: add clip flags ( #992 )
2018-05-09 07:16:15 +00:00
Florent Kermarrec
60fd362d57
serwb: fix rx_comma detection
2018-05-07 23:54:35 +02:00
7d4a103a43
opticlock, suservo: set default kasli hw_rev
2018-05-07 09:07:18 +02:00
whitequark
c646409dbe
firmware: fix order of bits clocked into hmc542.
...
Fixes #993 .
2018-05-05 03:12:25 +00:00
whitequark
917a4185eb
Unbreak 9dc7efef.
2018-05-05 03:00:30 +00:00
whitequark
fd2b8d5f8f
firmware: raise hmc542 log level to INFO.
2018-05-05 02:59:49 +00:00
whitequark
a148729bf8
artiq_flash, artiq_devtool: add support for ssh -J option.
2018-05-05 02:50:01 +00:00
whitequark
9704fb837f
firmware: fix warnings in ad9154 driver.
2018-05-05 01:55:42 +00:00
whitequark
8a70c18d1e
firmware: add debug output to hmc542 driver.
2018-05-05 01:53:30 +00:00
whitequark
68ef09ed73
firmware: stop profiler before rebooting too.
2018-05-05 01:52:44 +00:00
whitequark
9dc7efefe4
compiler: transparently handle Windows newlines in RunTool.
2018-05-05 01:43:00 +00:00
whitequark
4f29d9134f
firmware: update log_buffer.
...
Fixes #986 .
2018-05-05 01:18:59 +00:00
whitequark
5ebc626cf4
artiq_coreprofile: fix an inverted option.
2018-05-05 00:49:42 +00:00
whitequark
b1d349cc1b
firmware: implement a sampling profiler.
...
Does not yet support constructing call graphs.
2018-05-05 00:44:40 +00:00
whitequark
9857dfcd7d
firmware: add irq::Exception to libboard.
2018-05-04 18:41:03 +00:00
0b4d06c7a9
worker: keep sys.modules untouched until the end of examine()
2018-05-02 12:50:37 +08:00
8079aa6d20
worker: python docs recommend not replacing sys.modules
2018-05-02 12:48:50 +08:00
8c69d939fb
worker: restore sys.modules in examine() ( #976 )
2018-05-02 12:32:35 +08:00
8d66d53e06
Revert "tools/file_import: restore sys.modules. Closes #976 "
...
This reverts commit b48e782dd6
2018-05-02 12:14:56 +08:00
5f0cfadb30
rtio/sed: add unittest for sequence number rollover
2018-05-02 12:04:30 +08:00
4120105e3a
rtio/sed: fix output network cmp_wrap
2018-05-02 12:04:03 +08:00
bce8fa3ec5
rtio/sed: add replace unittest at the top level ( #978 )
2018-05-02 10:58:18 +08:00
83fb431cd0
rtio/sed: pass sequence numbers through the FIFOs. Closes #978
2018-05-02 10:57:57 +08:00
Florent Kermarrec
05955bfd79
sayma_rtm: use bufio for sys4x (needed since we are using a -1 speedgrade)
2018-05-01 22:16:35 +02:00
b48e782dd6
tools/file_import: restore sys.modules. Closes #976
2018-05-01 22:15:47 +08:00
Florent Kermarrec
84e1f05559
sayma_rtm: make cd_sys4x clock domain reset_less
2018-05-01 16:11:26 +02:00
whitequark
623614f835
Update LLVM to 6.0.0 and Rust to 1.25.0.
2018-05-01 08:57:37 +00:00
Florent Kermarrec
64c8eee28d
serwb/phy/master: fix slave ready detection by filtering possible glitches on rx data (seems to happen when RTM fpga is not loaded)
2018-04-30 23:59:56 +02:00
5a683ddd1f
Revert "kasli: force hw_rev for the different targets"
...
This reverts commit 17d7d7856a
2018-04-28 23:24:41 +02:00
17d7d7856a
kasli: force hw_rev for the different targets
2018-04-28 21:30:29 +02:00
whitequark
f7e08ec46b
Unbreak f35f1001.
2018-04-28 01:03:08 +00:00
whitequark
f35f100110
compiler: don't crash printing locations of specialized functions.
...
Fixes #987 .
2018-04-28 00:49:25 +00:00
8812824fb2
suservo: speed up example, interlock mem
2018-04-27 17:17:17 +00:00
ae80bab180
urukul: reg based io-update is a kernel
2018-04-27 16:42:09 +00:00
5d3c76fd50
sayma_rtm: use bitstream opts in migen
2018-04-27 15:43:32 +00:00
5f00326c65
suservo: coeff mem write port READ_FIRST
2018-04-27 15:43:32 +00:00
73fa572275
suservo: documentation, small API changes
2018-04-27 16:53:22 +02:00
Florent Kermarrec
4e2d9abaf7
firmware/ad9154: combine analog and digital delay of hmc7043 for sysref scan
2018-04-27 14:32:03 +02:00
fe9834bac4
suservo: update 'technology preview' example [wip]
...
Still with mostly undocumented and unstable API.
2018-04-27 12:04:17 +00:00
307cd07b9d
suservo: lots of gateware/ runtime changes
...
tested/validated:
* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback
individual changes below:
suservo: correct rtio readback
suservo: example, device_db [wip]
suservo: change rtio channel layout
suservo: mem ports in rio domain
suservo: sck clocked from rio_phy
suservo: cleanup, straighten out timing
suservo: dds cs polarity
suservo: simplify pipeline
suservo: drop unused eem names
suservo: decouple adc SR from IIR
suservo: expand coredevice layer
suservo: start the correct stage
suservo: actually load ctrl
suservo: refactor/tweak adc timing
suservo: implement cpld and dds init
2018-04-27 13:50:26 +02:00
01f762a8f5
urukul/ad9910: support blind init
...
urukul: always set io_update attribute
to silence compiler warning w.r.t. kernel_invariants
2018-04-27 13:48:40 +02:00
Florent Kermarrec
3802c7badb
firmware/ad9154: add sysref scan/conf for jesd sc1
2018-04-27 13:20:20 +02:00
Florent Kermarrec
8212e46f5e
sayma_amc: filter jesd refclk/sysref with jreset (hmc7043 can generate noise when unconfigured see sinara issue #541 )
2018-04-27 13:04:37 +02:00
edbc7763e0
urukul: allow no io_update_device
2018-04-25 17:32:36 +00:00
8a1151b54f
suservo: example device db
2018-04-25 17:14:25 +00:00
f9b2c32739
suservo: add pgia spi channel
2018-04-25 17:14:25 +00:00
c83305065a
suservo: add servo/config/status register
2018-04-25 15:59:06 +00:00
105068ad90
suservo: fix restart timing
2018-04-25 15:19:49 +00:00
c304b6207a
suservo: drop adc idelays
2018-04-25 14:59:50 +00:00
b44d6517d1
suservo: use 125 MHz SDR ADC
...
* easier timing
* natural sampling on rising edge
* timing, signal robustness
* adjust the servo iteration timing
2018-04-25 14:32:23 +00:00
37c186a0fc
suservo: refactor, constrain
...
* remove DiffMixin, move pad layout handling to pads
* add input delay constraints, IDELAYs
2018-04-25 13:44:52 +00:00
d0258b9b2d
suservo: set input delays
2018-04-24 15:30:25 +00:00
fe75064c1e
suservo: cleanup rtio interface
2018-04-24 13:08:40 +00:00
3942c2d274
suservo: fix clkout cd drive
2018-04-24 10:18:32 +00:00
f74998a5e0
suservo: move arch logic to top, fix tests
2018-04-23 21:11:26 +00:00
4903eb074c
suservo: use BUFIO/BUFH for ADC
2018-04-23 18:30:19 +00:00
e36deab0a8
suservo/adc: try to help vivado extract srls
2018-04-23 18:30:19 +00:00
929ed4471b
kasli/SUServo: use suservo, implement urukul_qspi
...
m-labs/artiq#788
2018-04-23 18:30:18 +00:00
4c1e356f67
suservo: add pads rewiring layer for eems
2018-04-23 18:30:18 +00:00
99dd9c7a2a
suservo: fix rtio interface width
2018-04-23 18:30:18 +00:00
d5eea962ec
suservo: fix cnv_b diff
2018-04-23 18:30:12 +00:00
c8fd63754a
suservo: add unittests
...
m-labs/artiq#788
2018-04-23 18:25:59 +00:00
934c41b90a
gateware: add suservo
...
from
fe4b60b902m-labs/artiq#788
2018-04-23 18:24:59 +00:00
4fe09fddd5
examples/kc705_nist_clock: update to new ad53xx driver
2018-04-22 15:03:30 +08:00
c47d3ec8c8
zotino: use None as default for ldac and clr
...
This is also what AD53xx does.
2018-04-22 15:03:01 +08:00
d2d02ae353
artiq_coredebug: fix permissions
2018-04-22 15:02:17 +08:00
whitequark
3b054855ec
firmware: add allocator debug feature, invoked by artiq_coredebug frontend.
2018-04-21 19:39:46 +00:00
whitequark
873324d52b
firmware: don't truncate queued RPCs ( fixes #985 ).
2018-04-21 19:39:46 +00:00
whitequark
58967f14fd
compiler: do not try to re-coerce fully coerced numerics.
2018-04-21 18:25:52 +00:00
whitequark
742e273441
Commit missing part of b4e3c30d.
2018-04-20 15:27:27 +00:00
whitequark
0d5fd1e83d
runtime: fix race condition in log extraction code paths ( #979 ).
...
The core device used to panic if certain combinations of borrows
of the log buffer happened. Now they all use .try_borrow_mut().
2018-04-20 15:26:00 +00:00
whitequark
b4e3c30d8c
compiler: desugar x != y into not x == y ( fixes #974 ).
2018-04-20 12:20:45 +00:00
Florent Kermarrec
fe689ab4f2
firmware/serwb: add link test, use info! instead of debug! for link settings (useful to analyze logs from others boards)
2018-04-17 19:24:22 +02:00
Florent Kermarrec
439d2bf2bc
sayma/serwb: adapt, full reset of rtm on link reset
2018-04-17 19:24:03 +02:00
Florent Kermarrec
8edf4541d6
serwb: adapt test
2018-04-17 19:21:53 +02:00
Florent Kermarrec
20ccc9d82f
serwb/core/phy: move scrambler in phy, add link test, revert delay min/max checks
2018-04-17 19:21:21 +02:00
Florent Kermarrec
ebfac36223
serwb/scrambler: dynamic enable/disable
2018-04-17 19:20:06 +02:00
Florent Kermarrec
816a6f2ec7
serwb/phys: remove phy_width (revert linerate to 1Gbps)
2018-04-17 19:19:18 +02:00
48b48e44dd
kasli/mitll: fix demo
2018-04-17 20:15:38 +08:00
79f4892e22
kasli/mitll: fix RTIO channel numbers
2018-04-17 20:15:17 +08:00
eac447278f
kasli: add MITLL variant
2018-04-17 19:00:11 +08:00
756e120c27
kasli/sysu: add comments
2018-04-17 18:46:55 +08:00
Florent Kermarrec
1acd7ea1db
sayma/serwb: re-enable scrambling
2018-04-17 00:49:36 +02:00
Florent Kermarrec
ca01c8f1cb
sayma: reduce serwb linerate to 500Mbps
2018-04-16 23:19:15 +02:00
Florent Kermarrec
825a2158ba
serwb: add phy_width parameter to allow reducing linerate to 500Mbps or 250Mbps
2018-04-16 23:19:14 +02:00
Florent Kermarrec
bb90fb7d59
sayma/serwb: remove scrambling (does not seems to work on sayma for now...)
2018-04-07 15:57:57 +02:00
Florent Kermarrec
6aa8e2c433
serwb/test: replace valid/ready with stb/ack
2018-04-07 15:55:57 +02:00
Florent Kermarrec
73dbc0b6b6
serwb/test: adapt to new version
2018-04-07 15:09:29 +02:00
Florent Kermarrec
e15f8aa903
sayma/serwb: enable scrambling
2018-04-07 14:52:37 +02:00
Florent Kermarrec
9d0e8c27ff
serwb/scrambler: add flow control
2018-04-07 14:51:17 +02:00
Florent Kermarrec
2f8bd022f7
sayma_rtm: remove sys0p2x clock
2018-04-07 03:10:34 +02:00
Florent Kermarrec
1fd96eb0fd
serwb: replace valid/ready with stb/ack
2018-04-07 03:06:19 +02:00
Florent Kermarrec
c8a08375f8
serwb: replace valid/ready with stb/ack
2018-04-07 03:03:44 +02:00
Florent Kermarrec
73b727cade
serwb: new version using only sys/sys4x clocks domains, scrambling deactivated.
2018-04-07 02:59:14 +02:00
Florent Kermarrec
dd21c07b85
targets/sayma_rtm: fix serwb 2 ...
2018-04-03 18:59:05 +02:00
Florent Kermarrec
7488703f23
targets/sayma_rtm: fix serwb
2018-04-03 18:57:00 +02:00
Florent Kermarrec
aef0153a8f
targets/sayma: adapt to new serwb clocking
2018-04-03 18:53:39 +02:00
Florent Kermarrec
3248caa184
gateware/serwb: move all clocking outside of serwb, use existing sys/sys4x clocks
2018-04-03 18:48:08 +02:00
f0771765c1
rtio: move CRI write comment to more appropriate location
2018-03-29 23:55:00 +08:00
493d2a653f
siphaser: add false path between sys_clk and mmcm_freerun_output
2018-03-29 10:55:41 +08:00
4229c045f4
kasli: fix DRTIO master clock constraint
2018-03-29 10:20:31 +08:00
3d89ba2e11
sayma: remove debug leftover
2018-03-29 10:20:17 +08:00
605292535c
kasli: ignore OSERDESE2->ISERDESE2 timing path on DRTIO targets as well
2018-03-29 10:12:02 +08:00
416232cb64
runtime: do not reset RTIO PHY on core.reset(). Closes #971
2018-03-28 10:51:07 +08:00
5ca59467fd
ad53xx: make LDAC and CLR optional
2018-03-26 22:45:01 +08:00
whitequark
bab6723ff2
Revert "gateware: don't run tests if there is no migen."
...
This reverts commit 4804cfef9b
2018-03-26 03:33:52 +00:00
whitequark
4804cfef9b
gateware: don't run tests if there is no migen.
...
This allows us to skip testing gateware on Windows.
2018-03-26 03:26:34 +00:00
whitequark
87c2f119a5
artiq_devtool: add load action.
2018-03-25 20:29:51 +00:00
8d62ea2288
examples: fix KC705 ad53xx
2018-03-25 11:19:54 +08:00
c3f763e217
dashboard: also create monitoring widgets for the Zotino class
2018-03-25 11:19:40 +08:00
a20dfd9c00
examples/master: ad5360 -> zotino
2018-03-24 16:46:59 +01:00
0505e9124f
kc705: port device_db, ad53xx/zotino example
2018-03-24 16:05:26 +01:00
3a0dfb7fdc
ad53xx: port monitor, moninj dashboard, kc705 target
2018-03-24 16:04:02 +01:00
a8f0ee1c86
ad53xx: refactor offset_to_mu(), fix docs
2018-03-24 15:45:42 +01:00
b0c8097025
ad53xx: remove channel index AND
...
It's incorrect since it doesn't respect the number of channels
of any of those chips (none has 64 channels).
2018-03-24 15:39:06 +01:00
77bcc2c78f
zotino: style, use attributes to set SPI config
2018-03-24 15:37:34 +01:00
2cf414a480
ad53xx: move 8 bit shift out of ad53xx protocol funcs
...
That's specific to the SPI bus, not to the ad53xx.
2018-03-24 15:15:56 +01:00
08326c5727
ad53xx: style [nfc]
2018-03-24 14:10:20 +01:00
68e433a3a8
opticlock/device_db: resurrect novogorny
...
deleted in a992a67
2018-03-24 13:46:45 +01:00
hartytp
a992a672d9
coredevice/zotino: add ( #969 )
...
* Replace ad5360 driver with a ad53xx driver, designed to have a nicer interface
Add Zotino driver and add to opticlock target for Kasli
Test Zotino on hw:
- Verify all timings on the hardware with a scope
- Verify that we can correctly set and read back all registers in a loop (checks for SI and driver issues)
- check we can set LEDs correctly
- check calibration routine + all si unit functions with a good DVM
- look at DAC transitions on a scope (while triggering of a TTL) on persist to check there are no LDAC glitches etc
To do: update examples and e.g. KC705 device db.
2018-03-24 13:41:18 +01:00
1553fc8c7d
sed: reset valid in output sorter
2018-03-23 11:11:11 +00:00
0635907699
artiq_flash: fix cmdline formatting
2018-03-22 19:10:29 +08:00
46d5af31a1
artiq_flash: enclose filename in curly braces before passing to OpenOCD
...
Closes #927
2018-03-22 17:20:48 +08:00
eeedcfbdd7
artiq_flash: do not suppress useful backtrace information
2018-03-22 17:11:21 +08:00
f2cc2a5ff2
firmware: reset local RTIO PHYs on startup ( #958 )
2018-03-22 16:29:31 +08:00
770b0a7b79
novogorny: conv -> cnv
...
* parity with sampler
* also add novogorny device to opticlock
2018-03-21 18:38:42 +00:00
82c4f0eed4
sampler: fix channel gain retrieval
2018-03-21 14:22:13 +01:00
12d699f2a8
suservo: add sampler example
2018-03-21 12:21:53 +00:00
97918447a3
sampler: add coredevice driver
2018-03-21 12:21:53 +00:00
1afce8c613
kasli: simplify single eem pin formatting
2018-03-21 13:08:42 +01:00
d48b8f3086
kasli: fix sampler sdr/cnv pins
2018-03-21 09:28:00 +00:00
80903cead7
novogorny: streamline gain setting method, style [nfc]
2018-03-21 08:53:26 +00:00
f5a1001114
suservo: add device database and artiq_flash variant
2018-03-21 08:53:26 +00:00
1fb5907362
kasli: add SUServo variant (Sampler-Urukul Servo)
2018-03-21 08:53:26 +00:00
f74d5772f4
sampler: add wide eem definition
2018-03-21 08:53:26 +00:00
32f22f4c9c
sayma: disable SERDES TTL entirely
...
Timing closure becomes very random, even at 4X.
2018-03-21 13:03:48 +08:00
f8c2d54e75
ttl_serdes_ultrascale: configurable SERDES ratio. Also try X4 on Sayma
2018-03-21 13:01:38 +08:00
9c2d343052
sayma: use SERDES RTIO TTL
...
This is not enabled on the standalone design as it breaks timing.
2018-03-21 10:53:52 +08:00
9ad1fd8f25
urukul: add comment and doc about the AD9910 MASTER_RESET
2018-03-20 17:40:03 +01:00
f17c0abfe4
urukul: don't pulse DDS_RST on init
...
closes m-labs/artiq#940
Apparently, if the DDS are reset, every other time they don't work
properly.
2018-03-20 16:10:26 +00:00
a185e8dc52
urukul: fix MASK_NU offset
2018-03-20 16:10:11 +00:00
f4719ae24b
sdram: clean up console output
2018-03-20 15:42:49 +01:00
206664afd9
sdram: compact read_level output
2018-03-20 10:16:05 +00:00
495625b99d
bootloader: repeat memory test 4 times
2018-03-20 09:57:49 +00:00
6fb0cbfcd3
sdram: clean up, make read_level robust to wrap around
...
* fix a few rust warnings
* also do eye scans on kintex
2018-03-20 09:57:49 +00:00
3abb378fbe
i2c: unused variable
2018-03-20 09:56:26 +00:00
c8020f6bbd
ttl_serdes_generic: fix/upgrade test
2018-03-20 16:46:57 +08:00
a5825184b7
add ttl_serdes_ultrascale (untested)
2018-03-20 16:07:23 +08:00
fad066f1aa
ttl_serdes_7series: cleanup indentation
...
Inconsistent with other code and confuses text editors.
2018-03-20 15:50:04 +08:00
276b0c7f06
sdram: reject read delay wrap arounds
2018-03-20 00:28:41 +01:00
4b3f408143
sdram: simplify read level scan
2018-03-19 18:41:56 +00:00
845784c180
kusddrphy: use first and last tap that yield many valid reads
2018-03-19 17:54:26 +00:00
ed2e0c8b34
sayma/sdram/scan: test each tap 1024 times
2018-03-20 00:59:31 +08:00
hartytp
a27b5d88c2
Novogorny driver, remove unused imports ( #964 )
...
* Novogorny driver, remove unused imports
* more unused imports
* oops, one final one!
2018-03-19 11:58:14 +01:00
7a7ff6d2dd
Merge pull request #963 from hartytp/kasli_zotino_sampler
...
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 …
2018-03-19 10:52:50 +01:00
Thomas Harty
37d431039d
Fix typos.
...
Reduce ififo depth to 4 for Zotino.
2018-03-19 09:42:18 +00:00
whitequark
c86df8e13e
firmware: try to unstuck the I2C bus if it gets stuck.
...
Fixes #957 .
2018-03-19 06:23:23 +00:00
Thomas Harty
c4fa44bc62
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 on OptiClock.
2018-03-18 00:25:43 +00:00
f39b7b33e8
ad5360: whitespace [nfc]
2018-03-17 18:51:17 +01:00
ion
c1439bfd3b
Fix AD5360 after migration to SPI2
2018-03-17 11:37:11 +00:00
whitequark
4b5a78e231
compiler: do not pass files to external tools while they are opened.
...
This fixes access violations on Windows that are present both with
input and output files. For some reason, Cygwin-compiled binutils
did not exhibit this problem, but MSYS-compiled binutils do.
Fixes #961 .
2018-03-15 22:21:29 +00:00
whitequark
5cb2602021
artiq_devtool: flash gateware if -g is passed.
2018-03-15 08:33:53 +00:00
whitequark
9ea7d7a804
firmware: allow building without system UART.
2018-03-14 18:34:31 +00:00
whitequark
158ceb0881
artiq_devtool: add kasli target.
2018-03-14 18:13:13 +00:00
a315ecd10b
rtio/ttl_serdes_7series: reset IOSERDES ( #958 )
2018-03-14 09:01:29 +08:00
2fdc180601
dsp/fir: outputs reset_less (pipelined)
2018-03-13 17:11:50 +00:00
2edf65f57b
drtio: fix satellite minimum_coarse_timestamp clock domain ( #947 )
2018-03-13 00:20:57 +08:00
999ec40e79
bootloader: print gateware ident
2018-03-13 00:11:25 +08:00
2caeea6f25
update copyright year
2018-03-13 00:09:13 +08:00
1d081ed6c2
drtio: print diagnostic info on satellite write underflow ( #947 )
2018-03-12 23:41:19 +08:00
Florent Kermarrec
eb6e59b44c
sayma_rtm: fix serwb timing constraints (was causing the gated clock warning)
2018-03-12 11:25:29 +01:00
6dfebd54dd
ttl_serdes_7series: use correct IBUFDS_INTERMDISABLE port names
2018-03-12 10:37:33 +08:00
a04bd5a4fd
spi2: xfers take one more cycle until ~busy
2018-03-09 20:48:17 +01:00
Florent Kermarrec
5af4609053
libboard/sdram: limit write leveling scan to "512 - initial dqs taps delay" on ultrascale
2018-03-09 19:06:47 +01:00
Florent Kermarrec
a95cd423cc
libboard/sdram: add gap for write leveling
2018-03-09 18:53:57 +01:00
fc3d97f1f7
drtio: remove spurious multichannel transceiver clock constraints
...
They used to cause (otherwise harmless) Vivado critical warnings.
2018-03-09 22:46:27 +08:00
caf7b14b55
kasli: generate fine RTIO clock in DRTIO targets, separate RTIO channel code
2018-03-09 22:36:16 +08:00
Florent Kermarrec
8f6f83029c
libboard/sdram: add write/read leveling scan
2018-03-09 13:50:51 +01:00
Florent Kermarrec
b0b13be23b
libboard/sdram: rename read_delays to read_leveling
2018-03-09 09:23:20 +01:00
3fbcf5f303
drtio: remove TSC correction ( #40 )
2018-03-09 10:36:17 +08:00
e38187c760
drtio: increase default underflow margin. Closes #947
2018-03-09 00:49:24 +08:00
37f5f0d38d
examples: add DMA to Sayma DRTIO
2018-03-09 00:49:24 +08:00
Florent Kermarrec
8475c21c46
firmware/libboard/sdram: kusddrphy now use time mode for odelaye3/idelaye3, now reloading dqs delay_value (500ps) with software
2018-03-08 10:00:00 +01:00
8bd15d36c4
drtio: fix error CSR edge detection ( #947 )
2018-03-08 16:28:25 +08:00
0adbbd8ede
drtio: reset aux packet gateware after locking to recovered clock
...
Closes #949
2018-03-08 15:41:13 +08:00
8bd85caafb
examples: fix Sayma DRTIO ref_period
2018-03-08 15:09:33 +08:00
37ec97eb28
ad9910/2: add sw invariant only when passed
2018-03-07 21:32:59 +01:00
82831a85b6
kasli/opticlock: add eem6 phys
2018-03-07 21:32:59 +01:00
3a6566f949
rtio: judicious spray with reset_less=True
...
Hoping to reduce rst routing difficulty and easier RTIO timing closure.
2018-03-07 14:57:18 +00:00
b0282fa855
spi2: reset configuration in rio_phy
2018-03-07 14:42:11 +00:00
7afb23e8be
runtime: demote dropped and malformed packets msgs to debug
2018-03-07 14:28:21 +01:00
4af7600b2d
Revert "LaneDistributor: try equivalent spread logic"
...
This reverts commit 8b70db5f17
2018-03-07 11:34:51 +00:00
a6d1b030c1
RTIO: use TS counter in the correct CD
...
artiq/m-labs#938
2018-03-07 11:34:42 +00:00
8b70db5f17
LaneDistributor: try equivalent spread logic
2018-03-07 11:34:42 +00:00
2cbd597416
LaneDistributor: style and signal consolidation [NFC]
2018-03-07 11:34:42 +00:00
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
74d1df3ff0
firmware: implement si5324 skew calibration
2018-03-07 10:57:30 +08:00
f7aba6b570
siphaser: fix phase_shift_done CSR
2018-03-07 10:57:30 +08:00
acfd9db185
siphaser: minor cleanup
2018-03-07 10:57:30 +08:00
e6e5236ce2
firmware: fix si5324 select_recovered_clock
2018-03-07 10:57:30 +08:00
7d98864b31
sayma: enable siphaser
2018-03-07 10:57:30 +08:00
c2d2cc2d72
runtime: fix setup_si5324_as_synthesizer
2018-03-07 10:57:30 +08:00
a6e29462a8
sayma: enable multilink DRTIO
2018-03-07 10:57:30 +08:00
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
994ceca9ff
sayma_amc: disable slave fpga gateware loading
2018-03-06 17:27:43 +01:00
f4dad87fd9
coredevice: add pcf8574a driver
...
I2C IO expander with 8 quasi-bidirectional pins
2018-03-06 14:27:19 +01:00
62af7fe2ac
Revert "kasli/opticlock: use plain ttls for channels 8-23"
...
This reverts commit bd5c222569eb68d624a5ac1e9f2542f6ee553f83.
No decrease in power consumption or improvement in timing.
2018-03-06 14:27:19 +01:00
fd3cdce59a
kasli/opticlock: use plain ttls for channels 8-23
2018-03-06 14:27:19 +01:00
50298a6104
ttl_serdes_7series: suppress diff_term in outputs
2018-03-06 14:27:19 +01:00
e356150ac4
ttl_simple: support differential io
2018-03-06 14:27:19 +01:00
956098c213
kasli: add second urukul, make clk_sel drive optional
2018-03-06 14:26:27 +01:00
07de7af86a
kasli: make second eem optional in urukul
2018-03-06 14:26:26 +01:00
257bef0d21
slave_fpga: print more info
2018-03-06 14:26:26 +01:00
c25560baec
sed: more LaneDistributor comments
2018-03-06 20:56:35 +08:00
f40255c968
sed: add comments about key points in LaneDistributor
2018-03-06 20:51:09 +08:00
Florent Kermarrec
5b3d6d57e2
drtio/gth: power down rx on restart (seems to make link initialization reliable)
2018-03-06 11:49:28 +01:00
Florent Kermarrec
64b05f07bb
drtio/gth: use parameters from Xilinx transceiver wizard
2018-03-06 11:02:15 +01:00
Florent Kermarrec
45f1e5a70e
drtio/gth: cleanup import
2018-03-06 10:56:07 +01:00
a274af77d5
runtime: fix compilation without DRTIO
2018-03-05 00:43:42 +08:00
432e61bbb4
drtio: add kernel API to check for link status. Closes #941
2018-03-05 00:23:55 +08:00
6aaa8bf9d9
drtio: fix link error generation
2018-03-04 23:20:13 +08:00
d747d74cb3
test: fix test_dma
2018-03-04 23:19:06 +08:00
928d5dc9b3
drtio: raise RTIOLinkError if operation fails due to link lost ( #942 )
2018-03-04 01:02:53 +08:00
ba74013e3e
runtime: add a missing overflow flag reset
2018-03-03 13:16:21 +08:00
abfbadebb5
doc: DMA can also raise RTIOUnderflow
2018-03-03 13:14:34 +08:00
ddcc68cff9
sayma_amc: move bitstream options to migen
...
close #930
2018-03-02 18:13:03 +08:00
5e074f83ac
examples: update kasli sysu
2018-03-02 16:05:12 +08:00
29d42f4648
artiq_flash: add kasli sysu
2018-03-02 15:49:41 +08:00
a9daaad77b
kasli: add SYSU variant and device_db
2018-03-02 14:44:31 +08:00
1c57d27ae2
slave_fpga: use sayma_rtm magic
2018-03-01 18:32:19 +01:00
de63e657b8
kasli/si5324: lock to 100 MHz with highest available bandwidth
2018-03-01 14:49:53 +01:00
abd160d143
slave_fpga: check DONE before loading
2018-03-01 19:53:34 +08:00
a04a36ee36
firmware: move wait for write completion to read()
2018-03-01 11:37:33 +01:00
a6ae08d8b8
firmware/spi: work around cs_polarity semantics
...
The semantics differ between the RTIO and CSR interface.
2018-03-01 11:19:18 +01:00
cc70578f1f
remove old spi RTIO Phy
2018-03-01 11:19:18 +01:00
ec5b81da55
kc705: switch backplane spi to spi2
2018-03-01 11:19:18 +01:00
6fbe0d8ed8
hmc830: be explicit about SPI mode selection
2018-03-01 11:19:18 +01:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
68278e225d
slave_fpga: check for INIT low
2018-03-01 17:28:01 +08:00
whitequark
14f6fa6699
firmware: fix a warning.
2018-03-01 01:25:55 +00:00
whitequark
d051cec0dd
firmware: remove useless module.
2018-03-01 01:22:52 +00:00
54984f080b
artiq_flash: flash RTM firmware
...
based on whitequark's work in f95fb27m-labs/artiq#813
2018-02-28 19:29:01 +01:00
0c49201be7
firmware: add slave fpga serial load support
...
based on whitequark's work in f95fb27m-labs/artiq#813
2018-02-28 19:27:52 +01:00
1f999c7f5f
sayma_amc: expose RTM fpga load pins as GPIOs
2018-02-28 18:44:36 +01:00
cedecc3030
Revert "firmware: Sayma RTM FPGA bitstream loading prototype ( #813 )."
...
This reverts commit f95fb273f1
2018-02-28 18:43:56 +01:00
whitequark
f95fb273f1
firmware: Sayma RTM FPGA bitstream loading prototype ( #813 ).
2018-02-28 16:46:23 +00:00
Florent Kermarrec
2896dc619b
drtio/transceiver/gth: fix multilane
2018-02-28 14:15:40 +01:00
5046d6a529
ad9912/10: add a bit more slack to init()
2018-02-27 23:14:44 +01:00
f97163cdee
examples/master: sync device_db with kc705_nist_clock
2018-02-27 19:40:00 +01:00
whitequark
916b10ca94
examples: spi → spi2.
2018-02-27 18:36:45 +00:00
386aa75aaa
kasli: control SFP1 and SFP2 LEDs in DRTIO satellite to match master
2018-02-27 23:18:18 +08:00
5d81877b34
kasli: implement multi-link DRTIO on SFP1 and SFP2 of master
2018-02-27 23:15:20 +08:00
Florent Kermarrec
1f0d955ce4
drtio/transceiver/gtp: implement tx multi lane phase alignment sequence
2018-02-27 12:32:25 +01:00
e565d3fa59
kasli: add analyzer and RTIO log to DRTIO master target
2018-02-27 18:09:07 +08:00
760724c500
kasli/device_db: fix i2c switch addr
2018-02-26 11:37:12 +01:00
b466a569bf
coredevice: export spi2
2018-02-24 09:49:31 +01:00
Florent Kermarrec
5b0f9cc6fd
drtio/transceiver/gth: fix single transceiver case
2018-02-23 12:15:47 +01:00
cff85ee13b
novogorny: simplify and fix coefficient
2018-02-23 10:09:44 +01:00
Florent Kermarrec
b4ba71c7a4
drtio/transceiver/gth: implement tx multi lane phase alignment sequence (fix merge issue...)
2018-02-23 08:37:05 +01:00
Florent Kermarrec
820c834251
drtio/transceiver/gth: implement tx multi lane phase alignment sequence
2018-02-22 22:14:15 +01:00
bc5e949bb4
novogorny: fix gain register length
2018-02-22 18:45:55 +00:00
1452cd7447
novogorny: add coredevice driver and test with Kasli
...
m-labs/artiq#687
2018-02-22 17:19:51 +01:00
74517107f0
ad9912: add slack after prodid read
2018-02-22 17:19:51 +01:00
3b7971d15d
kasli: spelling
2018-02-22 17:19:51 +01:00
771bf87b56
kc705: port amc101_dac/spi0 and sma_spi to spi2
2018-02-22 17:19:51 +01:00
d4a10dcbd4
urukul: fix example
2018-02-22 11:28:50 +01:00
e8d4db1ccf
coreanalyzer: add spi2 support
...
m-labs/artiq#926
2018-02-22 11:28:46 +01:00
f8e6b4f4e3
ad5360: port to spi2
...
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db
This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1
m-labs/artiq#926
2018-02-22 10:25:46 +01:00
96423882f2
fix 4d6619f3b
2018-02-22 15:27:54 +08:00
fa0d929b4d
drtio: reorganize RX synchronizers
2018-02-22 15:21:23 +08:00
e5de5ef473
kasli: use deterministic RX synchronizer
...
Could not reproduce the "fully broken bitstream" bug.
2018-02-22 15:18:09 +08:00
4d6619f3bc
satman: send ResetAck
2018-02-22 15:17:44 +08:00
a5ad1dc266
kc705: fix sdcard miso pullup
2018-02-21 19:41:05 +01:00
0d8145084d
test_spi: move to new spi2 core
2018-02-21 19:41:05 +01:00
898bad5abc
spi2: fixes
2018-02-21 19:41:05 +01:00
Florent Kermarrec
5eda894db4
firmware/libboard/sdram: increase read_delays dead zone to 32 on KU
2018-02-21 19:36:37 +01:00
whitequark
96f697ec96
firmware: update compiler_builtins to unbreak __gtdf2.
...
Fixes #883 .
2018-02-21 15:21:48 +00:00
a63fd306af
urukul: use spi2
...
* switch kc705 and kasli targets to spi2 gateware on urukul
* rewrite urukul, ad9912, ad9910
* update example experiments, device_dbs
2018-02-21 15:00:28 +00:00
37a0d6580b
spi2: add RTIO gateware and coredevice driver
...
1006218997
2018-02-21 13:37:36 +00:00
91a4a7b0ee
kasli: free run si5324 on opticlock for now
2018-02-21 13:37:29 +00:00
7a1d71502a
ttl_serdes_7series: drive IBUF and INTERM disables from serdes
2018-02-21 13:37:29 +00:00
476e4fdd56
ttl_serdes_7series: disable IBUF and INTERM when output
2018-02-21 13:37:29 +00:00
Florent Kermarrec
afc16a67b6
firmware/liboard/sdram.rs: iterate read multiple times in read_delays to avoid false positives
2018-02-21 14:15:35 +01:00
whitequark
86ceee570f
compiler: reject calls with unexpected keyword arguments.
...
Fixes #924 .
2018-02-21 11:37:12 +00:00
f060d6e1b3
drtio: increase A7 clock aligner check period
2018-02-20 18:50:35 +08:00
738654c783
drtio: support remote RTIO resets
2018-02-20 18:48:54 +08:00
f15b4bdde7
style
2018-02-20 18:47:59 +08:00
7d9c7ada71
drtio: fix test infinite loop
2018-02-20 17:42:00 +08:00
ad2c9590d0
drtio: rewrite/fix reset and link bringup/teardown
2018-02-20 17:26:43 +08:00
7e02d8245c
kasli: false paths
...
* don't bother with the round trip OSERDESE2 -> ... -> pad -> ... ->
ISERDESE2
* clock groups with derived clocks c.f. migen 9c3a301
2018-02-19 13:05:11 +00:00
0f4549655b
sayma: use Xilinx RX synchronizer
...
Cannot be used on Kasli, this breaks the bitstream entirely (nothing on UART).
2018-02-19 17:49:53 +08:00
52049cf36a
drtio: add Xilinx RX synchronizer
2018-02-19 17:49:43 +08:00
3bc575bee7
drtio: add missing define for Sayma master
2018-02-19 17:11:21 +08:00
7376ab0ff8
drtio: fix Sayma after 83abdd28
2018-02-19 17:10:55 +08:00
Florent Kermarrec
f5831af535
drtio/transceiver/gtp_7series_init: don't reset gtp rx on power down
2018-02-19 10:03:19 +01:00
Florent Kermarrec
89a158c0c9
drtio/transceiver/gtp_7series_init: remove dead code
2018-02-19 10:02:23 +01:00
Florent Kermarrec
782051f474
drtio/transceiver/gtp_7series_init: add no retiming on gtp resets
2018-02-19 09:59:50 +01:00
01fa6c1c2e
reorganize examples
2018-02-19 15:46:08 +08:00
4b4090518b
drtio: clean up remnants of removed debug functions
2018-02-19 15:14:32 +08:00
c329c83676
kasli: fix disable_si5324_ibuf no_retiming
2018-02-19 12:19:05 +08:00
a93decdef2
kasli: disable DRTIO IBUFDS_GTE2 until Si5324 is initialized
2018-02-19 00:48:37 +08:00
94c20dfd4d
drtio: fix misleading GenericRXSynchronizer comment
2018-02-19 00:47:54 +08:00
83abdd283a
drtio: signal stable clock input to transceiver
2018-02-18 22:29:30 +08:00
c87636ed2b
si5324: fix cfb21ca
2018-02-18 11:38:20 +01:00
caedcd5a15
ad9912: cleanup, document init()
2018-02-18 11:38:16 +01:00
75c89422c9
ad991[02]: sysclk can be 1 GHz
2018-02-18 10:29:19 +00:00
287d533437
Revert "sayma_amc: remove RTM bitstream upload core. Closes #908 "
...
This reverts commit 2d4a1340ea
2018-02-17 17:38:48 +08:00
73985a9215
sayma: remove constraints at outputs of serwb PLL (see misoc d1489ed)
2018-02-17 17:38:17 +08:00
039dee4c8e
si5324: rename SI5324_FREE_RUNNING to SI5324_AS_SYNTHESIZER
...
The previous name was causing confusion with the FREE_RUN bit
that connects the crystal to CLKIN2.
2018-02-17 13:54:50 +08:00
cfb21ca126
si5324: fix usage of external CLKIN2 reference
2018-02-17 13:52:01 +08:00
fb8b36cd41
clean up ccc279b8
2018-02-17 12:10:46 +08:00
hartytp
ccc279b8da
rewrite HMC7043 init code without using ADI GUI outputs, working analog/digital delay
2018-02-17 12:07:11 +08:00
e41f49cc75
kasli: opticlock 125 MHz, mark external reference case broken
2018-02-16 17:23:15 +00:00
7002bea0ab
kasli: clean up urukul example more
2018-02-15 14:21:17 +01:00
4d42df2a7c
kasli: set up Si5324 in standalone operation
2018-02-15 20:32:58 +08:00
c5ae81f452
satman: remove unused 62.5MHz Si5324 settings
2018-02-15 20:29:51 +08:00
d7387611c0
sayma: print RTM gateware version
2018-02-15 19:31:58 +08:00
whitequark
d572c0c34d
artiq_devtool: fix the hotswap action.
2018-02-14 23:10:27 +00:00
whitequark
fe50018037
firmware: make network tracing runtime switchable.
2018-02-14 23:03:20 +00:00
2adba3ed33
urukul: document ad9912, and cpld, fix api
2018-02-14 09:45:17 +01:00
ede98679fc
ad9910: add documentation
2018-02-14 09:05:03 +01:00
b6395a809b
kasli: remove old urukul test code
2018-02-13 22:16:57 +01:00
be693bc8a9
opticlock: examples
2018-02-13 22:13:40 +01:00
a3d136d30d
opticlock: wire urukul and novogorny
2018-02-13 22:13:40 +01:00
7f1bfddeda
ad9910: tweak spi timing for higher speed
2018-02-13 22:13:40 +01:00
6a6695924f
urukul: proto 8
2018-02-13 22:13:40 +01:00
bc6af03a61
urukul: (proto 7) drop att_le
2018-02-13 22:13:40 +01:00
df177bfd5b
use new misoc identifier
2018-02-13 20:38:48 +08:00
ab5f397fea
sed/fifos: use AsyncFIFOBuffered
...
(D)RTIO now passes timing at 150MHz on Kasli.
2018-02-13 20:02:51 +08:00
00f42f912b
rename 'RTM identifier' to 'RTM magic number'
...
Avoids confusion with the MiSoC identifier (containing the ARTIQ version).
2018-02-13 20:02:51 +08:00
96b948f57f
remote_csr: add sanity check of CSR CSV type column
2018-02-13 20:02:51 +08:00
e67a289e2b
examples: add SAWG sines (DAC synchronization test)
2018-02-13 20:02:51 +08:00
Florent Kermarrec
bfdda340fd
drtio/transceiver/gtp_7series: use parameters from xilinx wizard
2018-02-13 00:23:59 +01:00
Florent Kermarrec
180c28551d
drtio/gateware/transceiver/gtp_7series: add power down state before reset on rx (seems to make restart reliable)
2018-02-09 20:17:02 +01:00
2d4a1340ea
sayma_amc: remove RTM bitstream upload core. Closes #908
2018-02-07 12:27:35 +08:00
whitequark
61c64a76be
gateware: use a per-variant subfolder in --output-dir. ( fixes #912 )
...
This commit also adds support for --variant and --args
to artiq-devtool.
2018-02-06 08:19:01 +00:00
Florent Kermarrec
e80b481032
firmware/libboard_artiq/hmc830_7043.rs: add template for sys_ref phase configuration for dac1/dac2 and fpga
2018-02-05 13:40:17 +01:00
Florent Kermarrec
e50bebb63d
firmware/liboard_artiq/ad9154.rs: add checks for jesd subclass 1 (verify that we receive the sysref and that phase error is within the specified window error threshold).
2018-02-05 13:39:30 +01:00
9fca7b8faa
artiq_flash: also report sayma AMC SYSMONE1 data
...
requires hardware patch (https://github.com/m-labs/sinara/issues/495 )
2018-01-30 15:17:11 +08:00
fb8c779b4f
artiq_flash: report XADC data
...
* bump openocd
* only kasli, kc705, sayma rtm so far
2018-01-30 14:56:50 +08:00
whitequark
807eb1155b
Update smoltcp.
...
Fixes #902 .
2018-01-30 03:29:08 +00:00
whitequark
a669652854
artiq_flash: tell openocd to not listen on any network ports.
2018-01-30 03:12:06 +00:00
whitequark
0edc34a9e5
artiq_devtool: the proxy artiq_flash action doesn't exist anymore.
2018-01-28 15:19:17 +00:00
whitequark
885ab40946
conda: split RTM and AMC packages back.
...
This avoids multiplying the RTM compilation time by the number
of AMC packages.
2018-01-28 14:27:55 +00:00
whitequark
11a8b84355
Merge the build trees of sayma_amc and sayma_rtm targets.
...
This also makes them a single artiq_flash target, and a single
conda package.
2018-01-27 19:54:31 +00:00
whitequark
0b9c551962
artiq_flash: implement flash read functionality.
2018-01-27 19:54:31 +00:00
0aacdb0458
tools: add missing import
2018-01-28 02:12:46 +08:00
6f90a43df2
examples: reorganize for new hardware
2018-01-28 02:11:45 +08:00
67625fe912
test: check kernel overhead credibility
2018-01-28 01:02:03 +08:00
e8ed3475ea
test: add kernel overhead test ( #407 )
2018-01-28 01:00:59 +08:00
whitequark
eed2db3a98
artiq_flash: make the proxy action unnecessary.
2018-01-27 15:43:27 +00:00
whitequark
d58393a1e5
runtime: build with -Cpanic=unwind.
...
This is required for backtraces to function. I'm not sure how it
turned out that master had -Cpanic=abort.
2018-01-26 23:01:24 +00:00
whitequark
08101b631d
artiq_devtool: fix typo.
2018-01-26 13:55:31 +00:00
440e19b8f9
kasli: use SFP2 for DRTIO mastering
...
SFP1 PCB routing has some issues.
Also use SFP1 LED for DRTIO in both master and satellite.
2018-01-26 19:02:54 +08:00
0d2f89db53
si5324: chip does not ack RST_REG write
2018-01-25 11:06:19 +08:00
ca4d5ae73e
artiq_flash: add kasli drtio variants
2018-01-25 00:00:07 +08:00
77f90cf93b
test: relax RTIO counter test and print result
2018-01-24 10:07:22 +08:00
ed0fbd5662
test: add test for RTIO counter ( #883 )
2018-01-24 00:28:39 +08:00
e0e795f11c
sayma_amc: constrain pin, remove keep
2018-01-23 15:42:47 +00:00
b5c035bb52
sayma_rtm: constrain serwb clock input
2018-01-23 13:54:53 +00:00
aada38f508
kasli, kc705: remove vivado "keep", cleanup a constraint
2018-01-23 13:15:26 +00:00
85102e191e
sayma_rtm: derive clocks automatically
...
* also don't add false paths unless necessary
2018-01-23 11:00:55 +00:00
7d1b3f37c9
sayma_rtm: set CFGBVS/CONFIG_VOLTAGE, compress
2018-01-23 10:56:42 +00:00
cb0016ceee
examples/sayma: fix ref_multiplier
...
SAWG is working, whoohoo!
2018-01-23 15:26:03 +08:00
cfffd9e13d
si5324: kasli support
2018-01-23 13:17:03 +08:00
649deccd9b
kasli: fix DRTIO satellite QPLL refclksel
2018-01-23 12:27:19 +08:00
4b4374f76a
sayma: register_jref for JESD204. Closes #904
2018-01-23 12:19:15 +08:00
763aefacff
kasli: fix typo
2018-01-23 12:10:54 +08:00
c7b148a704
kasli: when using both GTP clocks, send REFCLK0 to PLL0 and REFCLK1 to PLL1
2018-01-23 12:08:10 +08:00
d6157514c7
gtp_7series: flexible QPLL channel selection
2018-01-23 12:03:09 +08:00
9f87c34a94
kasli: fix QPLL instantiation
2018-01-23 10:39:31 +08:00
98a5607634
gtp_7series: set clock muxes correctly for second QPLL channel
2018-01-23 10:39:20 +08:00
25fee1a0bb
gtp_7series: use QPLL second channel
2018-01-23 10:15:49 +08:00
031d7ff020
kasli: keep using second QPLL channel for DRTIO satellite
2018-01-23 10:13:10 +08:00
626075cbc1
gtp_7series: simplify TX clocking
2018-01-23 09:49:23 +08:00
74b7baa8c5
urukul example: mmcx clock input
2018-01-22 20:30:08 +01:00
a86b28def2
urukul: example additions
...
* relax timings for faster spi xfers
* continuous readback test to explore spi speed limit
2018-01-22 20:29:30 +01:00
5a9035b122
urukul: faster spi clock
2018-01-22 18:27:40 +00:00
ca1fdaa190
ad9910: relax timing for faster spi clock
2018-01-22 18:27:40 +00:00
401e57d41c
gtp_7series: fix nchannels assert
2018-01-23 01:28:01 +08:00
aa62e91487
kasli: add DRTIO targets (no firmware)
2018-01-23 01:27:40 +08:00
296ac35f5d
sayma_amc: SFP TX disable is active-high
2018-01-23 00:32:09 +08:00
77192256ea
kc705: style
2018-01-23 00:02:35 +08:00
ab7c49d6d0
sayma_amc: raise error on invalid variant
2018-01-23 00:02:16 +08:00
c1ac3b66b1
sayma_rtm: fix 8fe463d4a
2018-01-23 00:01:45 +08:00
53facfef13
sayma: build fixes
2018-01-22 18:33:22 +08:00
25f3feeda8
refactor targets
2018-01-22 18:25:10 +08:00
5198c224a2
sayma,kasli: use new pin names
2018-01-22 11:51:07 +08:00
whitequark
8598e475e9
artiq_flash: fix a refactoring mistake.
2018-01-20 08:30:42 +00:00
c3323f0d57
hmc830: improve lock failure error report
2018-01-20 15:42:53 +08:00
whitequark
115aa0d0d6
artiq_flash: support load action for Sayma RTM FPGA.
2018-01-20 07:23:50 +00:00
whitequark
94592c7a4c
artiq_flash: unify flash handling in XC7 and Sayma programmers.
2018-01-20 07:23:50 +00:00
whitequark
1ffabac06f
artiq_flash: use atexit for tempfile cleanup.
2018-01-20 07:23:50 +00:00
Florent Kermarrec
8fe463d4a0
sayma_rtm: add UART loopback to easily know if rtm fpga is alive
2018-01-20 06:04:34 +01:00
Florent Kermarrec
74ce7319d3
sayma: reduce serwb linerate to 625Mbps (make it work on saymas with 1.8v issue, related?)
2018-01-20 06:04:18 +01:00
whitequark
f4022ba872
remoting: avoid a race condition.
2018-01-20 01:30:44 +00:00
whitequark
83278a6edb
artiq_flash: fix a refactoring bug.
2018-01-20 01:30:44 +00:00
hartytp
37fa3b29da
firmware: add register dump on HMC830 lock timeout.
2018-01-20 00:19:31 +00:00
whitequark
934bc53cb5
artiq_devtool: refactor.
2018-01-19 20:35:35 +00:00
whitequark
ebd02c4f43
artiq_flash: fix typo.
2018-01-19 18:53:49 +00:00
whitequark
1c7cb737ca
artiq_flash: refactor.
2018-01-19 17:45:49 +00:00
whitequark
bcc39a8c9d
artiq_flash: add --dry-run option.
2018-01-19 17:45:49 +00:00
whitequark
323c7e66cf
artiq_devtool: fix help message.
2018-01-19 17:45:49 +00:00
Florent Kermarrec
9eb13aba3c
liboard_artiq/hmc830_7043: allow sysref digital/analog delay configuration (will need to be adjusted for jesd subclass1)
2018-01-19 17:19:02 +01:00
Florent Kermarrec
d27727968c
add artix7 gtp (3gbps), share clock aligner with gth_ultrascale
2018-01-19 12:17:54 +01:00
cdbf95d46a
kasli: fix permissions
2018-01-19 18:31:20 +08:00
whitequark
3c0b164e4d
artiq_devtool: update for new board file convention.
...
Also fix a typo in documentation.
2018-01-19 09:43:03 +00:00
whitequark
4fd236d234
artiq_flash: cache transferred artifacts.
2018-01-19 08:28:04 +00:00
whitequark
3922a7c64b
artiq_devtool: make locking reentrant.
2018-01-19 07:58:58 +00:00
whitequark
b553804e5a
artiq_flash: implement network transparency.
2018-01-19 07:39:55 +00:00
whitequark
80cbef0031
firmware: always reset PHY when initializing Ethernet.
...
Fixes #897 .
2018-01-19 04:56:11 +00:00
whitequark
1f82ceaa85
firmware: add HMC542 (Allaki) support.
2018-01-19 04:47:26 +00:00
Florent Kermarrec
07f4e2e35a
libboard_artiq/ad9154: fix prbs test (only keep prbs7) and
...
always do it after ad9154 initialization
2018-01-18 08:19:37 +01:00
8ec33ae7bd
kasli: feed EEM clock fan-out from SI5324
2018-01-17 17:27:59 +01:00
whitequark
dbe48d3cad
Fix 3313e997.
2018-01-17 11:31:32 +00:00
whitequark
3313e997df
test: fix test_worker to work when deprecation warnings are emitted.
2018-01-17 11:27:56 +00:00
ed3e3b2791
sayma_amc: clarify --with-sawg help
2018-01-17 12:10:30 +01:00
Florent Kermarrec
f54b27b79c
sayma_amc: prepare for jesd subclass 1
2018-01-17 11:49:36 +01:00
whitequark
f77aa9b78f
artiq_flash: rename sayma to sayma_amc to fix bitstream discovery.
...
Fixes #895 .
2018-01-17 01:45:47 +00:00
whitequark
a536d6df12
artiq_flash: add sayma_rtm support.
2018-01-17 01:21:19 +00:00
whitequark
bfceef439f
Add missing parts of f317d1a2.
2018-01-17 01:14:16 +00:00
whitequark
1e896d4ba8
firmware: fix warnings.
2018-01-17 00:48:46 +00:00
whitequark
f317d1a2c6
Update board naming (again) to match DNS.
2018-01-17 00:42:56 +00:00
Florent Kermarrec
f73c3e5944
gateware/test/serwb: update and cleanup test (v2...)
2018-01-16 20:06:43 +01:00
7405006668
sayma: rtio clock is jesd fabric clock
2018-01-16 18:19:04 +01:00
whitequark
247167d34a
Revert "gateware/test/serwb: update and cleanup tests"
...
This reverts commit 5b03cc2fae
2018-01-16 08:21:26 +00:00
whitequark
444b901dbe
sayma: add RTM configuration port.
2018-01-16 07:28:00 +00:00
Florent Kermarrec
702c35821b
libboard_artiq/ad9154: add dac_status and dac_prbs (untested)
2018-01-15 22:15:35 +01:00
Florent Kermarrec
5b03cc2fae
gateware/test/serwb: update and cleanup tests
2018-01-15 21:53:40 +01:00
1c15124c5e
artiq_flash: add kasli
2018-01-15 14:17:40 +01:00
whitequark
6891141fa6
artiq_flash: add sayma support.
2018-01-15 11:43:29 +00:00
529033e016
kernel_cpu: disable PCU
...
* contributes to long timing paths on artix 7 (kasli)
* currently only used for testing and debugging
2018-01-12 12:03:50 +00:00
ac3c3871d0
kasli: s/extensions/variant/g
2018-01-12 12:29:42 +01:00
7429ee4fb6
firmware: make read leveling robust for KUS SDRAM
...
Increases the initial delay step into the valid read window as
with the original delay I was not getting out of the noisy
transition window, as evidenced by seeing read delay windows
of only 8 LSB ~10% of the time, leading to failing memory
tests
2018-01-12 10:35:38 +08:00
7c82fcf41a
targets: avoid passing cpu_type around unnecessarily
2018-01-11 11:21:55 +08:00
6d58c4390b
Merge branch 'sed-merge'
2018-01-10 13:14:39 +08:00
94d51d1364
firmware: fix drtio_dbg module syntax
2018-01-10 12:15:23 +08:00
04b2fd3e13
sayma: fix AD9154NoSAWG ramp clock domain
2018-01-10 12:11:33 +08:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
Florent Kermarrec
2009734b3c
serwb/phy: get 625Mbps linerate working, increase timeout
2018-01-09 18:54:52 +01:00
Florent Kermarrec
9c6a7f7509
serwb/kusphy: use same serwb_serdes_5x reset than s7phy
2018-01-09 18:54:05 +01:00
whitequark
267c699835
firmware: support DDRPHY without write leveling ( fixes #886 ).
...
Currently, this is kasli.
2018-01-09 02:41:02 +00:00
whitequark
07ccb9eebd
firmware: support configuration without ethphy ( #886 ).
...
Currently, this is kasli.
2018-01-08 22:16:17 +00:00
whitequark
34a5445802
compiler: don't die if addr2line cannot extract line from backtrace.
...
Fixes #885 .
2018-01-08 21:53:04 +00:00
whitequark
3a3f44af53
firmware: update smoltcp.
2018-01-08 21:41:53 +00:00
whitequark
987a9c8308
conda: update rustc to 1.23.0.
2018-01-08 21:39:15 +00:00
8813aee6b1
targets: add kasli [wip, untested]
2018-01-04 16:12:12 +01:00
161a414567
serwb: debug print on error
2018-01-04 22:23:59 +08:00
e1a75ac1c1
runtime: set log level early
...
We want to debug startup.
2018-01-04 22:19:48 +08:00
whitequark
fc9766d2fa
firmware: reset ethphy before initializing smoltcp ( fixes #884 ).
2018-01-04 11:42:35 +00:00
67746cc7a0
urukul: raise instead of assert, clean up
2018-01-03 19:22:36 +00:00
e3d66d286d
urukul: ad9910 examples
2018-01-03 18:43:04 +00:00
eae7584432
ad9910: add [wip]
2018-01-03 18:43:04 +00:00
7ac809f8b3
urukul: do io reset
2018-01-03 18:43:04 +00:00
28a3ee7e61
urukul: make STA reading robust, add io_rst(), clean up
2018-01-03 18:43:04 +00:00
cef40eef43
ad9912: clean up
2018-01-03 18:43:04 +00:00
d8dbab024d
urukul: don't deal with dds_reset for now
2018-01-03 18:43:04 +00:00
e8608d12f5
device_db.py: whitespace
2018-01-03 18:43:04 +00:00
Florent Kermarrec
1e972034e8
gateware/targets: enable serwb scrambling on sayma amc & rtm
2018-01-03 17:34:46 +01:00
Florent Kermarrec
907af25a69
gateware/serwb: add scrambling, reduce cdc fifo depth
2018-01-03 17:34:03 +01:00
Florent Kermarrec
7f4756a869
gateware/serwb: cleanup packet
2018-01-03 17:30:12 +01:00
a940550e47
urukul: add CPLD and AD9912 driver [wip]
2018-01-02 19:59:24 +01:00
c2be820e9a
kc705_dds: make ext_clkout 100 MHz
2018-01-02 19:58:47 +01:00
43686f324b
kc705_dds: fix HPC voltages
...
* VADJ is 3.3 V due to the DDS card on LPC
* the LVDS standards need to be 2.5 V
* the direction control register on HPC (FMC-DIO to VHDCI)
was LVCMOS33 but while all the LVDS pairs are at VCCIO=VADJ=3.3 V
they were instantiated as LVDS_25 (ignoring the wrongly powered bank)
* we now use 2.5 V standards on HPC consistently despite VADJ=3.3 V
and hope for the best.
2018-01-02 13:41:07 +01:00
94b84ebe7c
kc705_dds: add urukul spi/ttl channels
2018-01-02 13:20:48 +01:00
53969d3686
kc705_dds: add urukul on vhdci extension definition
2018-01-02 13:20:47 +01:00
2f8e6c7462
spi: add diff_term, save power on outputs
2018-01-02 13:20:47 +01:00
6d20b71dde
ttl_serdes_7series: refactor IOSERDES
2018-01-02 13:20:47 +01:00
whitequark
b7f38b123b
frimware: update to log 0.4.
2018-01-01 11:45:55 +00:00
745e695b09
sayma: output a ramp in the absence of SAWG channels
2017-12-31 12:18:53 +01:00
whitequark
a371b25525
bootloader: allow using without Ethernet.
2017-12-31 09:21:28 +00:00
whitequark
70ebe431fd
satman: fix build after b8f3d28b.
2017-12-31 09:21:02 +00:00
whitequark
e1253db0e8
firmware: update crc dependency, use it in libdrtioaux.
2017-12-31 09:16:11 +00:00
whitequark
b8f3d28bc0
firmware: update compiler_builtins dependency and move it to libboard.
...
This is so that we only specify it once.
2017-12-31 09:16:11 +00:00
a1b8bca1e6
Revert "artiq_flash: ignore RTM FPGA"
...
Naive optimism.
This reverts commit 100bda2582
2017-12-31 13:29:36 +08:00
100bda2582
artiq_flash: ignore RTM FPGA
...
It has no flash connected, and attempting to detect it causes unnecessary program failure when the RTM is not present.
2017-12-31 12:10:16 +08:00
38ce1f1d5d
artiq_flash: support flashing satman
...
A bit ugly and ad-hoc but I cannot think of an easy and better option right now.
2017-12-31 12:09:18 +08:00
a897d82324
ad9154: retry initialization ( #727 )
2017-12-31 11:27:43 +08:00
6e0288e568
drtio: fix GTH CPLL reset
2017-12-30 12:14:36 +08:00
379d29561b
sayma: plausibility assertion on sawg data stream
2017-12-29 19:15:40 +01:00
37f9c0b10c
spi: register clk
...
following m-labs/misoc#65
1dc68b0d0b
2017-12-28 16:50:22 +01:00
whitequark
3505878176
bootloader: add basic network support.
2017-12-28 15:26:12 +00:00
whitequark
d2687ce3c4
firmware: fix a typo replacing spiflash::SECTOR_SIZE with PAGE_SIZE.
2017-12-28 15:26:12 +00:00
whitequark
33e0393e4a
firmware: move mod ethmac to libboard.
2017-12-28 14:40:15 +00:00
whitequark
55cfdec644
firmware: enlarge bootloader partition to 4 sectors.
2017-12-28 14:39:26 +00:00
whitequark
acd13837ff
firmware: implement the new bootloader.
2017-12-28 13:18:51 +00:00
whitequark
b9754e7108
firmware: deduplicate libbuild_misoc and libbuild_artiq.
2017-12-28 13:18:51 +00:00
8153cfa88f
drtio/gth: add probes on {tx,rx}_init.done
2017-12-28 16:49:08 +08:00
c086149782
drtio/gth: use async microscope probes
2017-12-28 16:37:40 +08:00
whitequark
d94db1de5d
Revert accidentally committed parts of 1b9b5602.
2017-12-28 08:23:34 +00:00
whitequark
fcc438524c
firmware: use main.rs as the root source for non-library crates. NFC.
2017-12-28 08:20:23 +00:00
whitequark
1b9b560242
firmware: use libbuild_misoc in libdrtioaux. NFC.
2017-12-28 08:20:23 +00:00
whitequark
8f33061a6d
firmware: fix sayma_amc_standalone build with sawg.
2017-12-28 08:20:23 +00:00
4ea801b2ea
firmware: si5324 moved to board_artiq
2017-12-28 15:45:45 +08:00
whitequark
3b18ece3b7
satman: update for changes in firmware elsewhere.
2017-12-28 07:36:33 +00:00
whitequark
d3066e5044
firmware: oops, misoc #[cfg]s were missing from libboard_artiq.
2017-12-28 07:36:33 +00:00
whitequark
ca419aa3c2
firmware: split out libboard_artiq from libboard.
2017-12-28 07:07:00 +00:00
6801921fc0
drtio: instrument GTH transceiver
2017-12-28 15:03:14 +08:00
whitequark
b443fbd8f7
runtime: remove #[repr(simd)] hack.
2017-12-28 04:46:27 +00:00
whitequark
7687a34285
firmware: remove dependency on compiler-rt.
2017-12-28 04:08:29 +00:00
whitequark
4dfe71676e
firmware: remove dependency on libbase.
2017-12-28 04:03:27 +00:00
whitequark
68f128944a
firmware: clean up makefiles.
2017-12-27 23:10:47 +00:00
whitequark
d7cb4963e1
firmware: prepare config block for access from BIOS/bootloader.
...
* remove liballoc dependency from mod config,
* move mod config to libboard,
* move config sector immediately after BIOS sector.
2017-12-27 21:28:40 +00:00
whitequark
5a2cbe7088
runtime: remove borrow_mut!() in favor of backtraces.
2017-12-27 19:15:25 +00:00
whitequark
4d915ad15b
compiler: do not permit str(...). ( #878 )
2017-12-27 03:10:50 +00:00
whitequark
355acb5e13
compiler: fix typo in a0a2650f.
2017-12-26 21:55:22 +00:00
whitequark
edfacbd063
conda: ship runtime.elf in board-specific packages.
...
This is so that backtraces may be symbolized.
2017-12-26 21:50:31 +00:00
whitequark
9aec64093b
compiler: do not ever emit !tbaa on invoke instructions.
2017-12-26 21:35:08 +00:00
whitequark
a2bc12da68
Only print gateware/software mismatch warning once per process.
2017-12-26 21:13:46 +00:00
whitequark
b31b59f7ca
compiler: update for llvmlite 0.20.0.
2017-12-26 16:25:19 +00:00
whitequark
a0a2650fca
compiler: do not use invoke for calls to nounwind ffi functions.
...
Otherwise, declarations such as:
@syscall(flags={"nounwind", "nowrite"})
def foo(...):
trip an LLVM assert because the invoke instruction and the !tbaa
metadata are no longer compatible since LLVM 4.0.
2017-12-26 16:24:57 +00:00
whitequark
fd6d97f052
artiq_devtool: set ServerAliveInterval.
2017-12-26 15:41:03 +00:00
whitequark
8b4a006855
runtime: update smoltcp.
2017-12-26 14:33:56 +00:00
whitequark
c939c6183e
Update to LLVM 4.0.
2017-12-26 14:09:17 +00:00
whitequark
71eca5ad61
runtime: fix some final flash storage issues.
2017-12-26 14:09:17 +00:00
whitequark
188764693e
runtime: we're growing, put storage at 1M instead of 512K.
2017-12-26 03:34:16 +00:00
whitequark
e2513a2401
runtime: ensure flash storage never overlaps with runtime sections.
2017-12-26 03:31:37 +00:00
whitequark
6e341da3a1
runtime: simplify. NFC.
2017-12-26 02:31:28 +00:00
whitequark
061fb3dcd5
runtime: remove accidentally committed parts of a Makefile.
2017-12-25 20:30:13 +00:00
whitequark
230f2e5e18
runtime: print (address-only) backtraces on core device panics.
2017-12-25 18:32:41 +00:00
whitequark
3eec15c01d
firmware: fix compatibility with newer rustc. NFC.
2017-12-25 17:16:05 +00:00
whitequark
1570a482c2
artiq_devtool: don't require lock for reset.
...
reset is mainly useful as a part of reset+hotswap sequence, and that
already needs lock via connect.
2017-12-25 16:15:51 +00:00
70b7f28ad3
drtio: drive SFP TX disable pins
2017-12-23 22:58:51 +08:00
00ed51f6f4
satman: use new alloc_list ( #880 )
2017-12-23 22:15:39 +08:00
f8c8f3fe26
drtio: fix GTH clock domains
2017-12-23 07:21:44 +08:00
1af21c0b29
drtio: integrate GTH transceiver for Sayma
2017-12-23 01:19:59 +08:00
c57b66497c
drtio: refactor/simplify GTH, use migen
2017-12-23 01:19:44 +08:00
77897228ca
drtio: add GTH transceiver code from Florent (197c79d47)
2017-12-22 18:01:28 +08:00
ebdbaaad32
drtio: remove KC705/GTX support
2017-12-22 17:51:42 +08:00
0681d472c7
conda: fix sayma_rtm_csr.csv location for Sayma AMC
2017-12-22 17:14:10 +08:00
cbd69287a7
artiq_flash: select Sayma standalone variant by default
2017-12-22 16:54:06 +08:00
44959144d8
conda: add Sayma AMC standalone board package
2017-12-22 16:44:04 +08:00
Florent Kermarrec
86825a852c
gateware/targets/sayma_rtm: add false path between cd_sys and cd_clk200
2017-12-21 23:52:44 +01:00
69d7e93e99
drtio: adapt examples to Sayma
2017-12-21 23:09:19 +08:00
a6ffe9f38d
drtio: add Sayma top-level designs
2017-12-21 23:08:56 +08:00
4fbc8772a5
sayma: allocate all user LEDs to RTIO, make one TTL SMA input
2017-12-21 19:27:38 +08:00
a23251276d
Revert "sayma: set up Si5324 for RGMII clock rerouting"
...
This reverts commit 2b01aa22b6
2017-12-21 14:42:15 +08:00
whitequark
701308474f
runtime: update smoltcp.
2017-12-19 15:51:03 +00:00
whitequark
aaba36be7a
runtime: log moninj messages at TRACE level, like all others.
2017-12-16 22:39:13 +00:00
whitequark
8cece4f260
runtime: hotswap slightly more carefully.
...
This generally lets some last characters out of UART, last ACKs
out of queues, etc. Nothing guaranteed though.
2017-12-16 22:39:13 +00:00
whitequark
4a9d8c9459
runtime: fix a warning.
2017-12-16 22:39:13 +00:00
2b01aa22b6
sayma: set up Si5324 for RGMII clock rerouting
2017-12-17 00:25:33 +08:00
David Nadlinger
c3c13da1a6
dashboard: Restore minimized experiments when trying to open them again
...
When the user tried to open an experiment from the explorer that
already existed, previously "nothing would happen" (focus change
without the window being restored).
2017-12-15 19:11:09 +00:00
b6199bb35b
sayma: style
2017-12-15 19:45:51 +08:00
649b60ea29
targets/kc705_drtio: remove DAC FMC card support
2017-12-15 17:32:25 +08:00
f02c74cb7b
libboard/si5324: enable both clock outputs
2017-12-15 16:56:44 +08:00
9caef3c1d3
libboard/si5324: configure I2C mux on Sayma
2017-12-15 16:45:26 +08:00
341e809859
targets/sayma_rtm: enable Allaki RF switches, GPIO access to attenuator
2017-12-15 13:08:35 +08:00
77977932f2
firmware: remove AD9516 support
...
This was only used in KC705 phaser.
2017-12-14 19:16:39 +08:00
2e74ce25d8
examples/sayma: make LED blink pattern more peculiar
2017-12-14 19:10:34 +08:00
100c2b1769
add Sayma LED blinker example
2017-12-14 18:49:50 +08:00
569484f888
remove phaser, adapt SAWG example to Sayma
2017-12-14 18:49:27 +08:00
5809e08686
runtime: no startup_clock config is not an error
2017-12-14 12:39:26 +08:00
71db953ea0
artiq_flash: add srcbuild option to look into MiSoC source build trees. Closes #868
2017-12-14 10:36:32 +08:00
5e251cd85c
sayma_amc: remove redundant bitstream options
...
* CONFIGRATE default is sufficient
* SPI width can be auto and QSPI works
2017-12-13 14:39:32 +01:00
a9d0f253a5
sayma_amc: set bitstream and config parameters
...
* slow down CCLK rate as there is additional loading
on the signals
* single bit SPI for now until we know that quad SPI
works
* set up
https://github.com/m-labs/artiq/issues/847
2017-12-13 21:21:52 +08:00
2917208d89
artiq_flash: fix sayma flashing
...
* do not include jtagspi as it already instantiates a flash bank
instead define the target manually
* erase before writing
* verify written images
2017-12-13 21:20:16 +08:00
whitequark
3cf5cef168
artiq_pcap: still grab the file if the command fails.
2017-12-08 07:36:56 +00:00
whitequark
9e8bb1d51c
runtime: update smoltcp.
2017-12-08 07:36:56 +00:00
a44f8282dc
test_performance: relax network speed to 2 MB/s
...
At QUARTIQ I am getting 2.4/2.3 MB/s and with single switch at M-Labs we
apparently regularly met 2.2/2.2 MB/s. But with the current multiple
switches and one of them being a problematic switch that triggered #837
it looks like it is a tad slower.
http://buildbot.m-labs.hk/builders/artiq/builds/1818/steps/python_coverage_1/logs/stdio
2017-12-06 17:21:41 +01:00
whitequark
1c25f7ef52
gateware: make software builds spew less junk on the console.
...
[ci skip]
2017-12-04 14:19:35 +00:00
whitequark
277b00eb9d
artiq_devtool: --config is no longer supported by artiq_flash.
...
[ci skip]
2017-12-04 14:19:31 +00:00
66e089b376
libboard/serwb: more explicit retry log message
2017-12-02 10:51:13 +08:00
Florent Kermarrec
0eb9f93611
libboard/serwb: retry serwb initialization on error
2017-12-01 22:45:05 +01:00
2e5b20d53d
libboard/hmc830_7043: enable HMC830
2017-11-30 12:06:54 +08:00
ad2a32d381
libboard/ad9154: small cleanup
2017-11-30 11:33:58 +08:00
Florent Kermarrec
bd75954192
libboard/ad9154: update for sayma (spi, jesd parameters, linerate), breaks kc705/ad9154 fmc support
2017-11-29 18:09:39 +01:00
Florent Kermarrec
8b8da39a8f
libboard/hmc830_7043.rs: fix HMC7043 comments
2017-11-29 17:59:42 +01:00
19498e59f9
libboard: fix JESD reset release
2017-11-29 18:18:41 +08:00
bb3d6ef84a
sayma: remove ad9154 from mem_map
...
Address is autogenerated by CSR system.
2017-11-29 18:17:25 +08:00
1426ecad64
dashboard: tidy dashboard naming logic
2017-11-28 08:56:04 +08:00
fbd4d8eb6f
dashboard: log server address even if friendly name given
2017-11-28 08:56:04 +08:00
b6ad510007
master: style (NFC)
2017-11-28 08:56:04 +08:00
00efb0ccd2
master: expand --name help
2017-11-28 08:56:04 +08:00
10ee3f19a8
dashboard: close config RPC Client cleanly at exit
2017-11-28 08:56:04 +08:00
0999f2dd86
dashboard: explain default configuration file path
2017-11-28 08:56:04 +08:00
84b5e68349
dashboard: use master's friendly name in dashboard title
2017-11-28 08:56:04 +08:00
fafabacf97
master: add friendly name
2017-11-28 08:56:04 +08:00
2852e793ab
dashboard: store separate configuration data for each master, keyed by server and port
2017-11-28 08:56:04 +08:00
cfb41e71a8
libboard: print serwb settings at the debug log level
2017-11-28 01:23:33 +08:00
whitequark
8e8f037971
runtime: print ethmac preamble error count.
...
Also, print total error count, not the difference (but still compute
the difference to determine *when* to print).
2017-11-26 22:35:26 +00:00
whitequark
e5995794be
artiq_devtool: actually hold the lock until script termination.
...
The open channel that ran flock was garbage collected, which caused
the flock command to terminate.
2017-11-26 20:54:24 +00:00
whitequark
b5d098c6db
Add lockfile support to artiq_devtool.
2017-11-26 15:17:35 +00:00
7f15f50878
coredevice/ad9912: add [untested, wip]
2017-11-24 18:47:46 +01:00
280392708d
sawg: fix typo
2017-11-22 20:06:02 +08:00
29181b1586
artiq_influxdb: use aiohttp.ClientSession. Closes #829
2017-11-22 17:31:09 +08:00
whitequark
26fdd42f8f
runtime: update smoltcp.
2017-11-22 08:09:06 +00:00
ecfe2e40ee
sayma_amc_standalone: rtio channels for both sawg groups
2017-11-19 18:32:42 +01:00
d1a7c1c3a1
sayma_amc_standalone: connect sawg to jesd again
2017-11-19 14:36:20 +01:00
Florent Kermarrec
dfdd2dd9e6
gateware/targets/sayma_amc_standalone: revert self.add_wb_slave on serwb
2017-11-19 09:01:20 +01:00
Florent Kermarrec
cd83b71d92
gateware/targets/sayma_amc_standalone: serwb working, need fixing on AD9154 data mapping
2017-11-18 18:10:28 +01:00
Florent Kermarrec
a3383c340c
firmware/satman/lib.rs: has_serwb_phy to has_serwb_phy_amc
2017-11-18 18:09:35 +01:00
Florent Kermarrec
39a8fc682d
artiq/firmware/libboard/hmc830_7043.rs: some cleanup, don't use hmc830 for now
2017-11-18 18:08:31 +01:00
Florent Kermarrec
f003566e52
serwb: fix rx_delay_inc on ultrascale, this was the issue serwb issue...
...
rx_delay_inc and rx_delay_ce were set for only one cycle, on ultrascale, these signals are translated to serwb_serdes_5x clock domain and we now set rx_delay_inc always to 1 (MultiReg), rx_delay_ce for one cycle (PulseSynchronizer)
2017-11-18 18:01:46 +01:00
Florent Kermarrec
1b976bfa4d
gateware/serwb/kusphy: use AsyncResetSynchronizer on cd_serwb_serdes_5x
2017-11-18 17:57:11 +01:00
Florent Kermarrec
aff1609a53
firmware/libboard: use correct jesd clocking
2017-11-10 10:56:45 +01:00
Florent Kermarrec
d90d624877
firmware/libboard/serwb: revert init reset, show delay
2017-11-10 10:53:20 +01:00
Florent Kermarrec
464b24a608
gateware/targets/sayma_amc: integrate ad9154 correctly (add crg, use cpll instead of qpll, use correct clocking) and cleanup serwb constraints.
2017-11-10 10:48:32 +01:00
Florent Kermarrec
278c739d30
gateware/targets/sayma_rtm: add dynamic clock mux, cleanup serwb clock constraints
2017-11-10 10:39:47 +01:00
Florent Kermarrec
48bfaec8d3
gateware/serwb/phy: remove unnecessary rx_dly_rst (use wrap-around), fix typo & pep8
2017-11-10 10:37:08 +01:00
Florent Kermarrec
59be095512
gateware/serwb/kusphy: use locally inverted clk_b on iserdese3
2017-11-10 10:35:48 +01:00
Florent Kermarrec
db82b11f29
gateware/serwb/core: cleanup and increase fifo depth
2017-11-10 10:33:39 +01:00
5dc131636d
artiq_flash: adapt to bit2bin
2017-11-09 18:10:15 +01:00
4880e4225d
bit2bin: cleanup
2017-11-09 13:00:04 +01:00
Florent Kermarrec
76ddb063cf
gateware/targets/sayma: get hmc830/7043 spi working (still need to test clock generation)
2017-11-06 12:08:28 +01:00
whitequark
fcd660d682
runtime: remove accidentally deleted code.
2017-11-03 16:10:59 +00:00
whitequark
dfb2fe0b80
runtime: allow #[cfg(not(has_ethmac))] builds.
2017-11-03 16:09:22 +00:00
whitequark
4835431ac3
runtime: allow #[cfg(not(has_kernel_cpu))] builds.
2017-11-03 16:04:17 +00:00
whitequark
ad8fcb8b86
runtime: has_rtio -> has_rtio_core.
...
has_rtio is the cfg for the kernel CPU, has_rtio_core is the one
for the comms CPU.
Also remove a few useless #[cfg]s.
2017-11-03 15:59:59 +00:00
whitequark
2404a0d8c8
runtime: allow #[cfg(not(has_rtio))] builds.
2017-11-03 15:49:30 +00:00
Florent Kermarrec
b3e920b3c8
firmware/libboard/serwb: fix init
2017-11-03 12:16:16 +01:00
Florent Kermarrec
5bd1e43ced
gateware/serwb: cleanup imports, use buffered SyncFIFO in EtherboneRecordSender
2017-11-03 12:15:14 +01:00
0d8bad5128
runtime: fix rtio::log
2017-11-03 09:25:37 +08:00
4387b0be1e
clean up rtio_log
2017-11-03 00:52:53 +08:00
62320432a5
artiq_flash: fix sayma amc tap/pld index
2017-11-01 14:45:07 +01:00
bfd36e7340
artiq_flash: update for Sayma OpenOCD changes
2017-11-01 20:11:18 +08:00
4a57b52241
artiq_flash: add preinit-command option
2017-11-01 17:34:10 +08:00
6089d44fd0
artiq_flash: update Sayma flash proxy bitstream name
2017-11-01 14:57:30 +08:00
8407b2c400
examples/ad5360: set FMC DIO directions
2017-10-31 23:15:03 +08:00
d80cf8d59d
kc705: add TTLs and shift register driver for FMC DIO
2017-10-31 23:14:39 +08:00
4deeccbead
coredevice: add shift register driver
2017-10-31 23:13:06 +08:00
f3f83174b1
test: check that DMA can underflow
2017-10-31 00:10:13 +08:00
0695afec37
examples/dma_blink: use handle
2017-10-31 00:07:34 +08:00
415fa00846
test: relax rtio test_loopback
2017-10-30 23:07:54 +08:00
20a5f095f8
test: use longer DMA sequence when playing it back repeatedly
...
The CPU has to keep up.
2017-10-30 23:06:38 +08:00
9bf189ca10
test: relax timing requirements when not using DMA handle
...
core_dma.playback() without handle incurs a round-trip with the comms
CPU and should not be used in critical real-time sections.
Closes #834 .
2017-10-30 22:57:12 +08:00
whitequark
b03e36e4e9
conda: update misoc.
2017-10-30 09:33:02 +00:00
whitequark
7f32ae31de
runtime: fix a typo.
2017-10-30 08:48:35 +00:00
whitequark
a66450b0af
runtime: temporarily revert ethmac statistics collection.
2017-10-30 08:27:51 +00:00
whitequark
ae2d7abbed
runtime: update smoltcp.
2017-10-30 08:26:54 +00:00
whitequark
cdf63c5ea0
runtime: interrogate ethmac error counters and display changes.
2017-10-30 07:46:23 +00:00
whitequark
978c0d98aa
runtime: update smoltcp.
2017-10-30 07:22:47 +00:00
whitequark
7dfe7d8c93
test: verify no network performance regression from current 2.2 MB/s.
2017-10-30 04:25:58 +00:00
whitequark
8e91856426
runtime: parse the "ip" configuration as IP, not CIDR.
...
Or it defaults to the default IP on settings that were previously
perfectly valid.
2017-10-30 04:25:58 +00:00
dc9327e056
dashboard: handle device dependencies in moninj
2017-10-26 14:33:49 +08:00
c98fe70cfa
dashboard: resize moninj widgets to fit titles
2017-10-26 12:02:15 +08:00
d5b5076f67
gateware/ad5360_monitor: fix SPI data decoding
2017-10-26 11:58:59 +08:00
00a2e51f99
examples/ad5360: adapt for Zotino
2017-10-26 11:58:15 +08:00
e80a527f2e
dashboard: add DAC monitoring widgets
2017-10-26 02:26:59 +08:00
bb6e7618bb
examples/device_db: update DAC entry for Zotino, add sections
2017-10-26 02:26:19 +08:00
whitequark
6bdeddd201
runtime: remove UDP-related code.
2017-10-25 02:55:01 +00:00
whitequark
cdba330845
Update smoltcp.
...
Fixes #840 .
2017-10-25 02:31:27 +00:00
7edff48b6d
conda/artiq_flash: use proxy bitstream package
...
fix #841
2017-10-23 15:21:54 +02:00
412548a86c
gateware: add AD5360 monitor (untested)
2017-10-23 20:09:28 +08:00
42aca0d64a
ad5360: revert incorrect part of a9798ae2
...
We don't have enumerate() yet.
2017-10-23 18:50:50 +08:00
a9798ae2b1
gateware/spi: style
2017-10-23 18:46:18 +08:00
5803ac9998
gateware: add Zotino SPI to NIST CLOCK target
2017-10-23 15:04:30 +08:00
4fa823b62a
gateware: add support for SPI-over-LVDS
2017-10-23 15:04:01 +08:00
whitequark
9d356ed93b
firmware: implement board::pcr.
2017-10-18 11:04:13 +00:00
e1e1f58ba9
libboard: fix use
2017-10-13 12:26:34 +02:00
95b3ddbaf0
scanwidget: protect against resize from zero
...
fix #839
2017-10-11 22:26:18 +02:00
893be82ad1
rtio/dma: raise underflow in test
2017-10-09 10:22:58 +08:00
a9c9d5779d
rtio/dma: add full-stack test with connection to RTIO core
2017-10-08 22:38:02 +08:00
5f083f21a4
rtio/dma: fix signal width
2017-10-08 22:37:46 +08:00
whitequark
e7dac530c1
runtime: avoid hardcoding ethmac slot layout, use info from CSR.
2017-10-03 19:16:11 +00:00
a89b053473
firmware: wait for HMC830 lock
2017-10-04 01:42:57 +08:00
whitequark
fd3a09dd4d
Fix ca254ec5.
2017-10-03 05:49:50 +00:00
whitequark
ca254ec55e
compiler: disallow op= on mutable lists only ( fix #835 ).
...
This only really applies to lists since those use fat pointers.
`x.y += z` is fine.
2017-10-02 07:21:14 +00:00
cda9719f4b
gui: update version number in background
2017-10-02 12:43:49 +08:00
whitequark
2684aec4c6
firmware: use read_unaligned instead of a hack. NFC.
2017-10-02 03:38:31 +00:00
whitequark
fd07c3f4d7
runtime: get rid of config_dummy.rs. NFC.
...
Use the same strategy as elsewhere.
2017-10-02 03:20:50 +00:00
whitequark
73c76ebb9a
firmware: eliminate most transmutes and document the rest. NFC.
2017-10-02 03:09:46 +00:00
whitequark
7ad54e1dcf
firmware: unbreak heap view.
...
This was missing since 7799413a
2017-10-02 02:02:45 +00:00
whitequark
e59b301a3b
compiler: disallow op= on mutable values ( fix #835 ).
...
In general, we can't reallocate a value in earlier stack frames,
or fixup references to it. This mainly impacts lists.
2017-10-02 01:55:26 +00:00
whitequark
f86744c65c
compiler: implement ~ operator ( fix #836 ).
2017-10-01 19:33:18 +00:00
whitequark
843786a091
compiler: minor intrinsic refactoring.
2017-10-01 19:00:10 +00:00
whitequark
491c7ef898
compiler: correct semantics of floating point % operator ( fix #830 ).
2017-10-01 18:57:45 +00:00
whitequark
62f2693e36
compiler: correct semantics of integer % operator ( #830 ).
2017-10-01 18:32:57 +00:00
c7de233208
Merge Sayma SAWG changes (untested)
...
See #798
* sinara:
conda: bump migen
sayma_amc: SAWG (untested)
sayma_rtm: make build dir
conda: jesd204b 0.4
2017-09-29 21:01:02 +02:00
b4c52c34f7
Merge branch 'sinara'
2017-09-30 01:11:16 +08:00
6c049ad40c
rtio: report channel numbers in asynchronous errors
2017-09-29 16:32:57 +08:00
5437f0e3e3
rtio: make sequence errors consistently asychronous
2017-09-29 14:40:06 +08:00
5e3cc83842
sayma_amc: SAWG (untested)
2017-09-27 18:44:35 +02:00
2604806512
sayma_rtm: make build dir
2017-09-27 18:35:46 +02:00
4e31e9a9ac
test: relax test_rtio.test_loopback
...
With SED there are 8 additional FIFO output stages.
2017-09-26 17:13:02 +08:00
73043c3464
drtio: disable SED lane spread
...
Doesn't improve things as the buffer space would still be determined
by the full FIFO, and adds unnecessary logic.
2017-09-26 16:46:09 +08:00
d7ef07a0c2
rtio/sed: document architecture
2017-09-26 16:44:23 +08:00
e6f0ce3aba
rtio/sed: test latency compensation
2017-09-26 16:11:21 +08:00
9905b8723b
rtio/sed: support negative latency compensation
2017-09-26 16:11:08 +08:00
f079ac6af6
rtio/sed: disable wait in TestLaneDistributor.test_regular
2017-09-26 16:10:52 +08:00
4112e403de
rtio/sed: latency compensation
2017-09-26 15:09:07 +08:00
whitequark
c00b3fe8cd
firmware: update smoltcp.
2017-09-24 22:57:27 +00:00
whitequark
7799413a41
firmware: update Rust from 1.18.0 to 1.20.0.
2017-09-24 22:51:44 +00:00
e430d04d3f
drtio: remove obsolete import
2017-09-24 12:49:21 +08:00
20d79c930c
drtio: use SED and input collector
2017-09-24 12:23:47 +08:00
aa8fc81a87
rtio: allow specifying glbl_fine_ts_width externally
2017-09-23 22:34:55 +08:00
whitequark
c1829f3eda
runtime: update smoltcp.
2017-09-22 19:05:18 +00:00
5cf0693758
rtio: use BlindTransfer to report collision and busy errors to sys domain
2017-09-21 22:31:56 +08:00
d74a7d272e
rtio: fix/cleanup parameters
2017-09-21 15:59:48 +08:00
07d3f87c51
rtio/sed: min_space → buffer_space
2017-09-21 14:36:13 +08:00
Thao
e94d2d3779
set range for divider values
2017-09-21 14:26:16 +08:00
d8aa75b742
rtio/sed: add minimum buffer space reporting
2017-09-20 11:27:57 +08:00
63e39dec94
style
2017-09-20 11:26:12 +08:00
9ccd95e10d
drtio: remove spurious signals
2017-09-19 20:48:12 +08:00
7249f151a5
targets/kc705_drtio_satellite: add missing shebang line
2017-09-19 20:48:12 +08:00
171a2d19a0
drtio: remove spurious signals
2017-09-19 20:47:37 +08:00
1ff10785dc
targets/kc705_drtio_satellite: add missing shebang line
2017-09-19 20:46:16 +08:00
ddcd6065e8
rtio: drive InputCollector.coarse_timestamp
2017-09-19 17:46:38 +08:00
ff8e17ab89
rtio: use input collector module
2017-09-19 15:53:35 +08:00
4dc80e3d05
rtio: add missing import
2017-09-19 15:53:23 +08:00
06a0707c00
rtio: add simulation unit test for input collector
2017-09-19 15:30:44 +08:00
d37577a8a1
rtio: add input collector module
2017-09-19 15:30:30 +08:00
6dc9cad2c9
rtio: add explanation about cri.counter
2017-09-19 12:05:12 +08:00
81d6317053
rtio/sed: take global fine TS width
2017-09-18 11:30:49 +08:00
65baca8c57
rtio: clean up error-prone rtlink.get_or_zero()
2017-09-17 16:11:36 +08:00
53860868f4
test/rtio: wait for counter >= now before checking for async errors
2017-09-16 17:52:39 +08:00
0824e0aeae
gateware/targets: remove deprecated ofifo_depth parameter
2017-09-16 17:04:11 +08:00
e2c1d4f3d5
rtio/sed: trigger collision error on non-data replace
2017-09-16 17:01:23 +08:00
770ce2658f
test: adapt SequenceError test to SED
2017-09-16 16:28:57 +08:00
0e25154e25
rtio/sed: quash writes to LogChannel
2017-09-16 15:19:30 +08:00
1cfe90b1d9
rtio/sed/Gates: fix fine_ts_width computation
2017-09-16 15:09:21 +08:00
30e7765a2e
drtio: add missing import
2017-09-16 14:36:27 +08:00
a3bb6c167c
rtio: use SED
2017-09-16 14:13:42 +08:00
131f5e4a3b
rtio/sed/LaneDistributor: fix CRI address
2017-09-16 14:13:01 +08:00
25c644c663
rtio/sed: add top-level core unit test
2017-09-16 14:05:08 +08:00
a155a481b1
rtio/sed: add top-level core
2017-09-16 14:04:56 +08:00
92c63ce2e4
rtio/sed: rename fifos/gates, refactor tsc
2017-09-16 14:03:48 +08:00
ac52c7c818
rtio/sed/LaneDistributor: style
2017-09-16 14:02:37 +08:00
7b299ba583
rtio/sed: remove obsolete ofifo_depth from test_output_driver
2017-09-16 14:01:19 +08:00
6b7a1893c7
rtio/sed/OutputDriver: support channels with different fine timestamp widths
2017-09-16 10:53:30 +08:00
f39ee7ad62
rtio/sed: fix seqn_width
2017-09-16 10:52:37 +08:00
064503f224
rtio/sed/LaneDistributor: support specifying existing CRI
2017-09-16 10:52:13 +08:00
1cb05f3ed5
rtio/sed/LaneDistributor: persist underflow/sequence error until next write
2017-09-16 10:51:44 +08:00
3c922463a0
style
2017-09-15 15:36:46 +08:00
8e5ab90129
rtio/sed: add FIFO wrapper
2017-09-15 15:36:34 +08:00
490c9815a2
rtio/sed: add TSC/gate (untested)
2017-09-14 19:53:21 +08:00
181cb42ba8
rtio/sed: centralize all layouts in one file
2017-09-14 19:52:31 +08:00
1b61442bc3
rtio/sed: fix lane spreading and enable by default
2017-09-13 22:48:10 +08:00
8cfe2ec53a
rtio/sed: fix sequence number width computation
2017-09-13 22:11:41 +08:00
a92a955d1e
rtio/sed: use __all__
2017-09-13 18:17:22 +08:00
feec6298a5
rtio/sed: add lane distributor simulation unittest
2017-09-13 18:00:16 +08:00
c74abccfd5
rtio/sed: lane distributor fixes
2017-09-13 17:50:06 +08:00
bdd96084c5
rtio/sed: add lane distributor (untested)
2017-09-13 00:07:26 +08:00
faf54127ac
rtio/sed: remove VCD fine in unittest
2017-09-11 23:07:09 +08:00
a2b7894134
rtio/sed: add output driver simulation unittest
2017-09-11 23:05:10 +08:00
00ff3f5b0d
rtio/sed: fix output driver busy output
2017-09-11 23:04:52 +08:00
64d9381c36
rtio/sed: remove uneeded yield in test_sed_output_network
2017-09-11 23:02:56 +08:00
666bc600a2
rtio/sed: add output driver (untested)
2017-09-11 11:10:28 +08:00
1d2ebbe60f
rtio/sed: make ON payload layout configurable, add latency function
2017-09-11 09:06:40 +08:00
527b403bb1
rtio/sed: add output network simulation unittest
2017-09-10 23:41:20 +08:00
c5d6a2ba1a
rtio/sed: more output network fixes
2017-09-10 23:41:04 +08:00
96505a1cd9
rtio/sed: output network fixes
2017-09-10 23:23:10 +08:00
5646e19dc3
rtio/sed: add output network (untested)
2017-09-10 14:38:43 +08:00
928cffb09b
firmware: export floor() in ksupport. Closes #828
2017-09-10 12:07:06 +08:00
264d5fde83
runtime: fix Rust types in RTIO
...
Previous code assumed all RTIO registers were u32, but this was changed
by misoc c5edcd08.
2017-09-06 19:21:39 +08:00
Florent Kermarrec
2091c7696a
artiq/gateware/targets/sayma_amc_standalone: fix serwb_pll vco_div and serwb_phy mode
2017-09-06 09:18:12 +02:00
2b2b345eb9
firmware: wait for serwb to be ready before proceeding further
2017-09-06 11:07:07 +08:00
33f053cff8
libboard: complete but undebugged support for HMC830/7043 programming
2017-09-06 10:46:02 +08:00
4baf17cebe
libboard: generate HMC7043 register write list
2017-09-05 21:46:03 +08:00
091bb28043
libboard: use libbuild_artiq
2017-09-05 21:13:04 +08:00
whitequark
74b7010d67
runtime: allow safely pulling logs even on TRACE log level.
...
Before this commit, this resulted in a packet flood, because
sending a TRACE log message to the host caused more TRACE log
messages to be emitted.
2017-08-31 14:13:51 +00:00
whitequark
c9e2a085ec
logging, aqctl_corelog: recognize log level TRACE.
2017-08-31 13:12:22 +00:00
b609366c6f
runtime: fix Rust types in RTIO
...
Previous code assumed all RTIO registers were u32, but this was changed
by misoc c5edcd08.
2017-08-31 13:42:32 +08:00
44edba0c65
firmware: add placeholder code for HMC830/7043 initialization
2017-08-31 13:35:47 +08:00
9edff2c520
remote_csr: interpret length as CSR size, not number of bus words
2017-08-31 13:34:48 +08:00
0a5904bbaa
firmware: support for multiple JESD DACs
2017-08-31 13:05:48 +08:00
a4144a07c4
sayma_amc: add converter SPI config defines
2017-08-31 13:04:38 +08:00
bacf8a1614
style
2017-08-31 12:52:09 +08:00
d92cca9712
artiq_flash: fix target_file handling
2017-08-31 12:16:52 +08:00
ad0a940e2d
sayma_rtm: hook up DAC SPI
2017-08-31 11:48:54 +08:00
f765dc50de
sayma_rtm: do not keep DACs in reset
2017-08-31 11:44:33 +08:00
a67659338d
sayma: clean up serwb comments
2017-08-31 11:42:01 +08:00
