forked from M-Labs/artiq
1
0
Fork 0

libboard/ad9154: update for sayma (spi, jesd parameters, linerate), breaks kc705/ad9154 fmc support

This commit is contained in:
Florent Kermarrec 2017-11-29 18:09:39 +01:00
parent 8b8da39a8f
commit bd75954192
1 changed files with 54 additions and 38 deletions

View File

@ -5,7 +5,7 @@ use ad9154_reg;
fn spi_setup(dacno: u8) {
unsafe {
csr::converter_spi::offline_write(1);
csr::converter_spi::cs_polarity_write(0);
csr::converter_spi::cs_polarity_write(0b0001);
csr::converter_spi::clk_polarity_write(0);
csr::converter_spi::clk_phase_write(0);
csr::converter_spi::lsb_first_write(0);
@ -71,11 +71,10 @@ fn jesd_jsync(dacno: u8) -> bool {
}
}
// ad9154 mode 2
// external clk=300MHz
// pclock=150MHz
// ad9154 mode 1
// linerate 6Gbps
// deviceclock_fpga=150MHz
// deviceclock_dac=300MHz
// deviceclock_dac=600MHz
struct JESDSettings {
did: u8,
@ -120,20 +119,20 @@ const JESD_SETTINGS: JESDSettings = JESDSettings {
did: 0x5a,
bid: 0x5,
l: 4,
l: 8,
m: 4,
n: 16,
np: 16,
f: 2,
s: 1,
s: 2,
k: 16,
cs: 1,
cs: 0,
subclassv: 1,
jesdv: 1
};
fn dac_setup() -> Result<(), &'static str> {
fn dac_setup(linerate: u64) -> Result<(), &'static str> {
// reset
write(ad9154_reg::SPI_INTFCONFA,
1*ad9154_reg::SOFTRESET_M | 1*ad9154_reg::SOFTRESET |
@ -148,9 +147,12 @@ fn dac_setup() -> Result<(), &'static str> {
1*ad9154_reg::SDOACTIVE_M | 1*ad9154_reg::SDOACTIVE);
clock::spin_us(100);
if (read(ad9154_reg::PRODIDH) as u16) << 8 | (read(ad9154_reg::PRODIDL) as u16) != 0x9154 {
return Err("AD9154 not found")
return Err("AD9154 not found");
} else {
info!("AD9154 found");
}
info!("AD9154 configuration...");
write(ad9154_reg::PWRCNTRL0,
0*ad9154_reg::PD_DAC0 | 0*ad9154_reg::PD_DAC1 |
0*ad9154_reg::PD_DAC2 | 0*ad9154_reg::PD_DAC3 |
@ -205,7 +207,7 @@ fn dac_setup() -> Result<(), &'static str> {
write(ad9154_reg::PDP_AVG_TIME, 0*ad9154_reg::PDP_ENABLE);
write(ad9154_reg::MASTER_PD, 0);
write(ad9154_reg::PHY_PD, 0x0f); // power down lanes 0-3
write(ad9154_reg::PHY_PD, 0x00); // lanes 0-7 enabled
write(ad9154_reg::GENERIC_PD,
0*ad9154_reg::PD_SYNCOUT0B |
1*ad9154_reg::PD_SYNCOUT1B);
@ -233,7 +235,7 @@ fn dac_setup() -> Result<(), &'static str> {
write(ad9154_reg::ILS_HD_CF,
0*ad9154_reg::HD | 0*ad9154_reg::CF);
write(ad9154_reg::ILS_CHECKSUM, jesd_checksum(&JESD_SETTINGS));
write(ad9154_reg::LANEDESKEW, 0x0f);
write(ad9154_reg::LANEDESKEW, 0xff);
for i in 0..8 {
write(ad9154_reg::BADDISPARITY, 0*ad9154_reg::RST_IRQ_DIS |
0*ad9154_reg::DISABLE_ERR_CNTR_DIS |
@ -258,20 +260,33 @@ fn dac_setup() -> Result<(), &'static str> {
write(ad9154_reg::CTRLREG2, 0*ad9154_reg::ILAS_MODE |
0*ad9154_reg::THRESHOLD_MASK_EN);
write(ad9154_reg::KVAL, 1); // *4*K multiframes during ILAS
write(ad9154_reg::LANEENABLE, 0x0f); // CGS _after_ this
write(ad9154_reg::LANEENABLE, 0xff); // CGS _after_ this
write(ad9154_reg::TERM_BLK1_CTRLREG0, 1);
write(ad9154_reg::TERM_BLK2_CTRLREG0, 1);
write(ad9154_reg::SERDES_SPI_REG, 1);
write(ad9154_reg::CDR_OPERATING_MODE_REG_0,
0*ad9154_reg::CDR_OVERSAMP | 0x2*ad9154_reg::CDR_RESERVED |
1*ad9154_reg::ENHALFRATE);
if linerate > 5_650_000_000 {
write(ad9154_reg::CDR_OPERATING_MODE_REG_0,
0*ad9154_reg::CDR_OVERSAMP | 0x2*ad9154_reg::CDR_RESERVED |
1*ad9154_reg::ENHALFRATE);
} else {
write(ad9154_reg::CDR_OPERATING_MODE_REG_0,
0*ad9154_reg::CDR_OVERSAMP | 0x2*ad9154_reg::CDR_RESERVED |
0*ad9154_reg::ENHALFRATE);
}
write(ad9154_reg::CDR_RESET, 0);
write(ad9154_reg::CDR_RESET, 1);
write(ad9154_reg::REF_CLK_DIVIDER_LDO,
0x0*ad9154_reg::SPI_CDR_OVERSAMP |
if linerate > 5_650_000_000 {
write(ad9154_reg::REF_CLK_DIVIDER_LDO,
0*ad9154_reg::SPI_CDR_OVERSAMP |
1*ad9154_reg::SPI_LDO_BYPASS_FILT |
0*ad9154_reg::SPI_LDO_REF_SEL);
} else {
write(ad9154_reg::REF_CLK_DIVIDER_LDO,
1*ad9154_reg::SPI_CDR_OVERSAMP |
1*ad9154_reg::SPI_LDO_BYPASS_FILT |
0*ad9154_reg::SPI_LDO_REF_SEL);
}
write(ad9154_reg::LDO_FILTER_1, 0x62); // magic
write(ad9154_reg::LDO_FILTER_2, 0xc9); // magic
write(ad9154_reg::LDO_FILTER_3, 0x0e); // magic
@ -334,7 +349,7 @@ fn dac_setup() -> Result<(), &'static str> {
let t = clock::get_ms();
while read(ad9154_reg::PLL_STATUS) & ad9154_reg::SERDES_PLL_LOCK_RB == 0 {
if clock::get_ms() > t + 200 {
return Err("SERDES PLL lock timeout");
return Err("AD9154 SERDES PLL lock timeout");
}
}
@ -361,16 +376,16 @@ fn dac_setup() -> Result<(), &'static str> {
0*ad9154_reg::SYNCCLRLAST);
clock::spin_us(1000); // ensure at least one sysref edge
if read(ad9154_reg::SYNC_STATUS) & ad9154_reg::SYNC_LOCK == 0 {
return Err("no sync lock")
return Err("A9154 no sync lock");
}
write(ad9154_reg::XBAR_LN_0_1,
7*ad9154_reg::LOGICAL_LANE0_SRC | 6*ad9154_reg::LOGICAL_LANE1_SRC);
0*ad9154_reg::LOGICAL_LANE0_SRC | 1*ad9154_reg::LOGICAL_LANE1_SRC);
write(ad9154_reg::XBAR_LN_2_3,
5*ad9154_reg::LOGICAL_LANE2_SRC | 4*ad9154_reg::LOGICAL_LANE3_SRC);
2*ad9154_reg::LOGICAL_LANE2_SRC | 3*ad9154_reg::LOGICAL_LANE3_SRC);
write(ad9154_reg::XBAR_LN_4_5,
0*ad9154_reg::LOGICAL_LANE4_SRC | 0*ad9154_reg::LOGICAL_LANE5_SRC);
4*ad9154_reg::LOGICAL_LANE4_SRC | 5*ad9154_reg::LOGICAL_LANE5_SRC);
write(ad9154_reg::XBAR_LN_6_7,
0*ad9154_reg::LOGICAL_LANE6_SRC | 0*ad9154_reg::LOGICAL_LANE7_SRC);
6*ad9154_reg::LOGICAL_LANE6_SRC | 7*ad9154_reg::LOGICAL_LANE7_SRC);
write(ad9154_reg::JESD_BIT_INVERSE_CTRL, 0x00);
write(ad9154_reg::GENERAL_JRX_CTRL_0,
0x1*ad9154_reg::LINK_EN | 0*ad9154_reg::LINK_PAGE |
@ -378,7 +393,7 @@ fn dac_setup() -> Result<(), &'static str> {
Ok(())
}
fn monitor() {
fn dac_monitor() {
write(ad9154_reg::IRQ_STATUS0, 0x00);
write(ad9154_reg::IRQ_STATUS1, 0x00);
write(ad9154_reg::IRQ_STATUS2, 0x00);
@ -421,22 +436,19 @@ fn monitor() {
write(ad9154_reg::IRQ_STATUS3, 0x00);
}
fn cfg(dacno: u8) -> Result<(), &'static str> {
fn dac_cfg(dacno: u8) -> Result<(), &'static str> {
spi_setup(dacno);
// Release the JESD clock domain reset late, as we need to
// set up clock chips before.
jesd_unreset();
jesd_enable(dacno, false);
jesd_prbs(dacno, false);
jesd_stpl(dacno, false);
clock::spin_us(10000);
jesd_enable(dacno, true);
dac_setup()?;
dac_setup(6_000_000_000)?;
jesd_enable(dacno, false);
clock::spin_us(10000);
jesd_enable(dacno, true);
monitor();
dac_monitor();
clock::spin_us(50000);
let t = clock::get_ms();
while !jesd_ready(dacno) {
if clock::get_ms() > t + 200 {
@ -444,29 +456,33 @@ fn cfg(dacno: u8) -> Result<(), &'static str> {
}
}
clock::spin_us(10000);
if read(ad9154_reg::CODEGRPSYNCFLG) != 0x0f {
if read(ad9154_reg::CODEGRPSYNCFLG) != 0xff {
return Err("bad CODEGRPSYNCFLG")
}
if !jesd_jsync(dacno) {
return Err("bad SYNC")
}
if read(ad9154_reg::FRAMESYNCFLG) != 0x0f {
if read(ad9154_reg::FRAMESYNCFLG) != 0xff {
return Err("bad FRAMESYNCFLG")
}
if read(ad9154_reg::GOODCHKSUMFLG) != 0x0f {
if read(ad9154_reg::GOODCHKSUMFLG) != 0xff {
return Err("bad GOODCHECKSUMFLG")
}
if read(ad9154_reg::INITLANESYNCFLG) != 0x0f {
if read(ad9154_reg::INITLANESYNCFLG) != 0xff {
return Err("bad INITLANESYNCFLG")
}
Ok(())
}
pub fn init() -> Result<(), &'static str> {
// Release the JESD clock domain reset late, as we need to
// set up clock chips before.
jesd_unreset();
//for dacno in 0..csr::AD9154.len() {
for dacno in 0..csr::AD9154.len() {
let dacno = dacno as u8;
debug!("setting up DAC #{}", dacno);
cfg(dacno)?;
debug!("setting up A9154-{} DAC...", dacno);
dac_cfg(dacno)?;
}
Ok(())
}