forked from M-Labs/artiq
1
0
Fork 0

sayma: set up Si5324 for RGMII clock rerouting

This commit is contained in:
Sebastien Bourdeauducq 2017-12-17 00:24:54 +08:00
parent c3c13da1a6
commit 2b01aa22b6
2 changed files with 32 additions and 0 deletions

View File

@ -82,6 +82,8 @@ fn startup() {
#[cfg(has_ad9154)]
board::ad9154::init().expect("cannot initialize AD9154");
#[cfg(rgmii_clock_rerouted)]
setup_rgmii_si5324();
#[cfg(has_ethmac)]
startup_ethernet();
#[cfg(not(has_ethmac))]
@ -91,6 +93,27 @@ fn startup() {
}
}
#[cfg(rgmii_clock_rerouted)]
fn setup_rgmii_si5324()
{
const SI5324_SETTINGS: board::si5324::FrequencySettings
= board::si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
n2_hs : 7,
n2_ls : 360,
n31 : 63,
n32 : 63,
bwsel : 4
};
info!("rerouting RGMII clock through Si5324");
unsafe { board::csr::ethphy::crg_reset_write(1); }
board::i2c::init();
board::si5324::setup(&SI5324_SETTINGS).expect("cannot initialize Si5324");
board::si5324::select_ext_input(true).expect("failed to select Si5324 input");
unsafe { board::csr::ethphy::crg_reset_write(0); }
}
#[cfg(has_ethmac)]
fn startup_ethernet() {
let hardware_addr;

View File

@ -140,6 +140,15 @@ class SaymaAMCStandalone(MiniSoC, AMPSoC):
serial_rtm.tx.eq(serial_1.rx)
]
# Si5324 used to work around RGMII clock routing issue on first PCB revision
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
self.csr_devices.append("si5324_rst_n")
i2c = self.platform.request("i2c")
self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
self.csr_devices.append("i2c")
self.config["I2C_BUS_COUNT"] = 1
self.config["HAS_SI5324"] = None
# AMC/RTM serwb
serwb_pll = serwb.phy.SERWBPLL(125e6, 1.25e9, vco_div=2)
self.comb += serwb_pll.refclk.eq(self.crg.cd_sys.clk)