forked from M-Labs/artiq
1
0
Fork 0

coredevice: add new ad9914 driver

This commit is contained in:
Sebastien Bourdeauducq 2018-05-13 22:30:33 +08:00
parent f383a470fe
commit c8d91b297d
1 changed files with 307 additions and 0 deletions

307
artiq/coredevice/ad9914.py Normal file
View File

@ -0,0 +1,307 @@
"""
Driver for the AD9914 DDS (with parallel bus) on RTIO.
"""
from artiq.language.core import *
from artiq.language.types import *
from artiq.language.units import *
from artiq.coredevice.rtio import rtio_output
from numpy import int32, int64
_PHASE_MODE_DEFAULT = -1
PHASE_MODE_CONTINUOUS = 0
PHASE_MODE_ABSOLUTE = 1
PHASE_MODE_TRACKING = 2
AD9914_REG_CFR1L = 0x01
AD9914_REG_CFR1H = 0x03
AD9914_REG_CFR2L = 0x05
AD9914_REG_CFR2H = 0x07
AD9914_REG_CFR3L = 0x09
AD9914_REG_CFR3H = 0x0b
AD9914_REG_CFR4L = 0x0d
AD9914_REG_CFR4H = 0x0f
AD9914_REG_DRGFL = 0x11
AD9914_REG_DRGFH = 0x13
AD9914_REG_DRGBL = 0x15
AD9914_REG_DRGBH = 0x17
AD9914_REG_DRGAL = 0x19
AD9914_REG_DRGAH = 0x1b
AD9914_REG_FTWL = 0x2d
AD9914_REG_FTWH = 0x2f
AD9914_REG_POW = 0x31
AD9914_REG_ASF = 0x33
AD9914_REG_USR0 = 0x6d
AD9914_FUD = 0x80
AD9914_GPIO = 0x81
class AD9914:
"""Driver for one AD9914 DDS channel.
The time cursor is not modified by any function in this class.
Output event replacement is not supported and issuing commands at the same
time is an error.
:param sysclk: DDS system frequency. The DDS system clock must be a
phase-locked multiple of the RTIO clock.
:param bus_channel: RTIO channel number of the DDS bus.
:param channel: channel number (on the bus) of the DDS device to control.
"""
kernel_invariants = {"core", "sysclk", "bus_channel", "channel",
"rtio_period_mu", "sysclk_per_mu", "write_duration_mu",
"dac_cal_duration_mu", "init_duration_mu", "init_sync_duration_mu",
"set_duration_mu", "set_x_duration_mu"
"continuous_phase_comp"}
def __init__(self, dmgr, sysclk, bus_channel, channel, core_device="core"):
self.core = dmgr.get(core_device)
self.sysclk = sysclk
self.bus_channel = bus_channel
self.channel = channel
self.phase_mode = PHASE_MODE_CONTINUOUS
self.rtio_period_mu = int64(8)
self.sysclk_per_mu = int32(self.sysclk * self.core.ref_period)
self.write_duration_mu = 5 * self.rtio_period_mu
self.dac_cal_duration_mu = 147000 * self.rtio_period_mu
self.init_duration_mu = 10 * self.write_duration_mu + self.dac_cal_duration_mu
self.init_sync_duration_mu = 18 * self.write_duration_mu + 2 * self.dac_cal_duration_mu
self.set_duration_mu = 6 * self.write_duration_mu
self.set_x_duration_mu = 7 * self.write_duration_mu
self.continuous_phase_comp = 0
@kernel
def write(self, addr, data):
rtio_output(now_mu(), self.bus_channel, addr, data)
delay_mu(self.write_duration_mu)
@kernel
def init(self):
"""Resets and initializes the DDS channel.
This needs to be done for each DDS channel before it can be used, and
it is recommended to use the startup kernel for this purpose.
"""
delay_mu(-self.init_duration_mu)
self.write(AD9914_GPIO, (1 << self.channel) << 1);
self.write(AD9914_REG_CFR1H, 0x0000) # Enable cosine output
self.write(AD9914_REG_CFR2L, 0x8900) # Enable matched latency
self.write(AD9914_REG_CFR2H, 0x0080) # Enable profile mode
self.write(AD9914_REG_DRGBH, 0x8000) # Programmable modulus B == 2**31
self.write(AD9914_REG_DRGBL, 0x0000)
self.write(AD9914_REG_ASF, 0x0fff) # Set amplitude to maximum
self.write(AD9914_REG_CFR4H, 0x0105) # Enable DAC calibration
self.write(AD9914_FUD, 0)
delay_mu(self.dac_cal_duration_mu)
self.write(AD9914_REG_CFR4H, 0x0005) # Disable DAC calibration
self.write(AD9914_FUD, 0)
@kernel
def init_sync(self, sync_delay):
"""Resets and initializes the DDS channel as well as configures
the AD9914 DDS for synchronisation. The synchronisation procedure
follows the steps outlined in the AN-1254 application note.
This needs to be done for each DDS channel before it can be used, and
it is recommended to use the startup kernel for this.
This function cannot be used in a batch; the correct way of
initializing multiple DDS channels is to call this function
sequentially with a delay between the calls. 10ms provides a good
timing margin.
:param sync_delay: integer from 0 to 0x3f that sets the value of
SYNC_OUT (bits 3-5) and SYNC_IN (bits 0-2) delay ADJ bits.
"""
delay_mu(-self.init_sync_duration_mu)
self.write(AD9914_GPIO, (1 << self.channel) << 1)
self.write(AD9914_REG_CFR4H, 0x0105) # Enable DAC calibration
self.write(AD9914_FUD, 0)
delay_mu(self.dac_cal_duration_mu)
self.write(AD9914_REG_CFR4H, 0x0005) # Disable DAC calibration
self.write(AD9914_FUD, 0)
self.write(AD9914_REG_CFR2L, 0x8b00) # Enable matched latency and sync_out
self.write(AD9914_FUD, 0)
# Set cal with sync and set sync_out and sync_in delay
self.write(AD9914_REG_USR0, 0x0840 | (sync_delay & 0x3f))
self.write(AD9914_FUD, 0)
self.write(AD9914_REG_CFR4H, 0x0105) # Enable DAC calibration
self.write(AD9914_FUD, 0)
delay_mu(self.dac_cal_duration_mu)
self.write(AD9914_REG_CFR4H, 0x0005) # Disable DAC calibration
self.write(AD9914_FUD, 0)
self.write(AD9914_REG_CFR1H, 0x0000) # Enable cosine output
self.write(AD9914_REG_CFR2H, 0x0080) # Enable profile mode
self.write(AD9914_REG_DRGBH, 0x8000) # Programmable modulus B == 2**31
self.write(AD9914_REG_DRGBL, 0x0000)
self.write(AD9914_REG_ASF, 0x0fff) # Set amplitude to maximum
self.write(AD9914_FUD, 0)
@kernel
def set_phase_mode(self, phase_mode):
"""Sets the phase mode of the DDS channel. Supported phase modes are:
* ``PHASE_MODE_CONTINUOUS``: the phase accumulator is unchanged when
switching frequencies. The DDS phase is the sum of the phase
accumulator and the phase offset. The only discrete jumps in the
DDS output phase come from changes to the phase offset.
* ``PHASE_MODE_ABSOLUTE``: the phase accumulator is reset when
switching frequencies. Thus, the phase of the DDS at the time of
the frequency change is equal to the phase offset.
* ``PHASE_MODE_TRACKING``: when switching frequencies, the phase
accumulator is set to the value it would have if the DDS had been
running at the specified frequency since the start of the
experiment.
"""
self.phase_mode = phase_mode
@kernel
def set_mu(self, frequency, phase=0, phase_mode=_PHASE_MODE_DEFAULT,
amplitude=0x0fff, ref_time=-1):
"""Sets the DDS channel to the specified frequency and phase.
This uses machine units (FTW and POW). The frequency tuning word width
is 32, whereas the phase offset word width depends on the type of DDS
chip and can be retrieved via the ``pow_width`` attribute. The amplitude
width is 12.
The "frequency update" pulse is sent to the DDS with a fixed latency
with respect to the current position of the time cursor.
:param frequency: frequency to generate.
:param phase: adds an offset, in turns, to the phase.
:param phase_mode: if specified, overrides the default phase mode set
by ``set_phase_mode`` for this call.
:param ref_time: reference time used to compute phase. Specifying this
makes it easier to have a well-defined phase relationship between
DDSes on the same bus that are updated at a similar time.
"""
if phase_mode == _PHASE_MODE_DEFAULT:
phase_mode = self.phase_mode
if ref_time < 0:
ref_time = now_mu()
delay_mu(-self.set_duration_mu)
self.write(AD9914_GPIO, (1 << self.channel) << 1)
self.write(AD9914_REG_FTWL, ftw & 0xffff)
self.write(AD9914_REG_FTWH, (ftw >> 16) & 0xffff)
# We need the RTIO fine timestamp clock to be phase-locked
# to DDS SYSCLK, and divided by an integer self.sysclk_per_mu.
if phase_mode == PHASE_MODE_CONTINUOUS:
# Do not clear phase accumulator on FUD
# Disable autoclear phase accumulator and enables OSK.
self.write(AD9914_REG_CFR1L, 0x0108)
pow += self.continuous_phase_comp
else:
# Clear phase accumulator on FUD
# Enable autoclear phase accumulator and enables OSK.
self.write(AD9914_REG_CFR1L, 0x2108)
fud_time = now_mu() + 2 * self.write_duration_mu
pow -= int32((ref_time - fud_time) * self.sysclk_per_mu * ftw >> (32 - 16))
if phase_mode == PHASE_MODE_TRACKING:
pow += int32(ref_time * self.sysclk_per_mu * ftw >> (32 - 16))
self.continuous_phase_comp = pow
self.write(AD9914_REG_POW, pow)
self.write(AD9914_REG_ASF, amplitude)
self.write(AD9914_FUD, 0)
@portable(flags={"fast-math"})
def frequency_to_ftw(self, frequency):
"""Returns the frequency tuning word corresponding to the given
frequency.
"""
return round(float(int64(2)**32*frequency/self.sysclk))
@portable(flags={"fast-math"})
def ftw_to_frequency(self, ftw):
"""Returns the frequency corresponding to the given frequency tuning
word.
"""
return ftw*self.sysclk/int64(2)**32
@portable(flags={"fast-math"})
def turns_to_pow(self, turns):
"""Returns the phase offset word corresponding to the given phase
in turns."""
return round(float(turns*2**16))
@portable(flags={"fast-math"})
def pow_to_turns(self, pow):
"""Returns the phase in turns corresponding to the given phase offset
word."""
return pow/2**16
@portable(flags={"fast-math"})
def amplitude_to_asf(self, amplitude):
"""Returns amplitude scale factor corresponding to given amplitude."""
return round(float(amplitude*0x0fff))
@portable(flags={"fast-math"})
def asf_to_amplitude(self, asf):
"""Returns the amplitude corresponding to the given amplitude scale
factor."""
return asf/0x0fff
@kernel
def set(self, frequency, phase=0.0, phase_mode=_PHASE_MODE_DEFAULT,
amplitude=1.0):
"""Like ``set_mu``, but uses Hz and turns."""
self.set_mu(self.frequency_to_ftw(frequency),
self.turns_to_pow(phase), phase_mode,
self.amplitude_to_asf(amplitude))
# Extended resolution functions
@kernel
def set_mu_x(self, xftw, amplitude=0x0fff):
delay_mu(-self.set_x_duration_mu)
self.write(AD9914_GPIO, (1 << self.channel) << 1)
# Enable programmable modulus.
# Note another undocumented "feature" of the AD9914:
# Programmable modulus breaks if the digital ramp enable bit is
# not set at the same time.
self.write(AD9914_REG_CFR2H, 0x0089)
self.write(AD9914_REG_DRGAL, xftw & 0xffff)
self.write(AD9914_REG_DRGAH, (xftw >> 16) & 0x7fff)
self.write(AD9914_REG_DRGFL, (xftw >> 31) & 0xffff)
self.write(AD9914_REG_DRGFH, (xftw >> 47) & 0xffff)
self.write(AD9914_REG_ASF, amplitude)
self.write(AD9914_FUD, 0)
@portable(flags={"fast-math"})
def frequency_to_xftw(self, frequency):
"""Returns the frequency tuning word corresponding to the given
frequency (extended resolution mode).
"""
return round(float(int64(2)**63*frequency/self.sysclk))
@portable(flags={"fast-math"})
def xftw_to_frequency(self, xftw):
"""Returns the frequency corresponding to the given frequency tuning
word (extended resolution mode).
"""
return xftw*self.sysclk/int64(2)**63
@kernel
def set_x(self, frequency, amplitude=1.0):
"""Like ``set_mu_x``, but uses Hz and turns."""
self.set_mu_x(self.frequency_to_xftw(frequency),
self.amplitude_to_asf(amplitude))