b09d07905c
kasli: add LUH/PTB/HUB variants
...
and refactor/simplify variant selection
2018-05-27 18:33:27 +00:00
Florent Kermarrec
bca2969957
sayma_rtm: add RTMScratch module to test remote Wishbone accesses
2018-05-24 16:53:10 +02:00
19efd8b13e
kasli: refactor EEM code
2018-05-24 18:41:54 +08:00
4e5fe672e7
kasli: add tester target
2018-05-21 17:43:39 +08:00
72aef5799e
kasli/ustc: use TTLOut
2018-05-18 22:55:28 +08:00
b10d3ee4b4
make RTIO clock switch optional and simplify
...
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
8a988d0feb
kasli: remove leftover debug print
2018-05-18 17:25:23 +08:00
37bd0c2566
kasli: add USTC target
2018-05-18 16:15:07 +08:00
Florent Kermarrec
f77bcbebb5
serwb/test_serwb_core: fix
2018-05-16 08:34:53 +02:00
Florent Kermarrec
77fc5c599f
serwb/test: update
2018-05-15 23:52:58 +02:00
Florent Kermarrec
3873d09692
serwb: rewrite high-speed phys by splitting clocking/tx/rx, scrambling is now always enabled.
2018-05-15 23:52:41 +02:00
Florent Kermarrec
f8a9dd930b
serwb/genphy: add device parameter (not used here, but this way all the phys share the same parameters), scrambling is also now always enabled.
2018-05-15 23:51:14 +02:00
Florent Kermarrec
2c627cd061
serwb/scrambler: simplify and set scrambler input data to 0 when sink.stb == 0
2018-05-15 23:49:17 +02:00
Florent Kermarrec
c18a73d45f
sayma_amc/rtm: use new serwb low-speed phy
2018-05-15 16:40:50 +02:00
Florent Kermarrec
913d1e8e12
serwb: add generic low-speed phy (125Mhz linerate, same phy for ultrascale/7-series)
2018-05-15 16:39:39 +02:00
Florent Kermarrec
520aade8fe
serwb/scrambler: cleanup/fix potential bug
2018-05-15 16:30:52 +02:00
504d37b66b
suservo: add SI units functions and document
...
m-labs/artiq#788
2018-05-14 12:26:49 +00:00
d71e4e60a9
suservo: use addition for offset
2018-05-14 12:26:49 +00:00
27f975e7bb
kasli: eem DifferentialInputs need DIFF_TERM
...
cleanup some formatting on the way
2018-05-14 12:26:49 +00:00
2a47b934ea
suservo: remove adc return clock gating
2018-05-14 12:26:49 +00:00
74c0b4452b
suservo: clkout and sdo[b-d] are inverted
2018-05-14 12:26:49 +00:00
04240cdc08
suservo: sampler channels are reversed
2018-05-14 12:25:09 +00:00
3027951dd8
integrate new AD9914 driver
...
moninj, analyzer, docs, examples, tests.
2018-05-13 23:29:35 +08:00
whitequark
ee4c475cf3
gateware: fix Sayma satellite build.
...
RTIO clock multiplier was removed from Sayma in 32f22f4c
2018-05-13 13:10:39 +00:00
8c1390e557
kasli: use 62.5MHz clock for siphaser reference ( #999 )
2018-05-12 22:58:03 +08:00
2426fea3f2
siphaser: support external reference for the freerunning 150MHz
2018-05-12 22:57:11 +08:00
6796413a53
serwb: remove unnecessary shebang line
2018-05-12 22:49:44 +08:00
Florent Kermarrec
f5208ff2f3
serwb/core: reduce buffering, use buffered=True
2018-05-12 12:03:58 +02:00
Florent Kermarrec
fdc953e569
serwb/etherbone: recuce buffering
2018-05-12 12:03:11 +02:00
Florent Kermarrec
6e67e6d0b1
serwb: revert some changes (was breaking simulation)
2018-05-12 11:59:46 +02:00
Florent Kermarrec
0a6d4ccd85
serwb/phy: improve/cleanup init
2018-05-12 01:35:34 +02:00
Florent Kermarrec
b6ab59fb80
serwb/phy: increase timeout
2018-05-12 01:32:55 +02:00
Florent Kermarrec
e09dbc89bc
serwb: remove idelaye3 en_vtc (was not done correctly, we'll add direct software control)
2018-05-12 01:32:16 +02:00
Florent Kermarrec
cd4477864a
serwb: fix case when rtm fpga is not loaded, lvds input can be 0 or 1
2018-05-11 23:31:25 +02:00
2e3bf8602f
serwb: reduce buffering. Closes #997
2018-05-11 14:13:41 +08:00
6b811c1a8b
sayma: fix runtime/rtm gateware address conflict
2018-05-09 19:47:29 +08:00
f055bf88f6
suservo: add clip flags ( #992 )
2018-05-09 07:16:15 +00:00
Florent Kermarrec
60fd362d57
serwb: fix rx_comma detection
2018-05-07 23:54:35 +02:00
7d4a103a43
opticlock, suservo: set default kasli hw_rev
2018-05-07 09:07:18 +02:00
whitequark
b1d349cc1b
firmware: implement a sampling profiler.
...
Does not yet support constructing call graphs.
2018-05-05 00:44:40 +00:00
5f0cfadb30
rtio/sed: add unittest for sequence number rollover
2018-05-02 12:04:30 +08:00
4120105e3a
rtio/sed: fix output network cmp_wrap
2018-05-02 12:04:03 +08:00
bce8fa3ec5
rtio/sed: add replace unittest at the top level ( #978 )
2018-05-02 10:58:18 +08:00
83fb431cd0
rtio/sed: pass sequence numbers through the FIFOs. Closes #978
2018-05-02 10:57:57 +08:00
Florent Kermarrec
05955bfd79
sayma_rtm: use bufio for sys4x (needed since we are using a -1 speedgrade)
2018-05-01 22:16:35 +02:00
Florent Kermarrec
84e1f05559
sayma_rtm: make cd_sys4x clock domain reset_less
2018-05-01 16:11:26 +02:00
Florent Kermarrec
64c8eee28d
serwb/phy/master: fix slave ready detection by filtering possible glitches on rx data (seems to happen when RTM fpga is not loaded)
2018-04-30 23:59:56 +02:00
5a683ddd1f
Revert "kasli: force hw_rev for the different targets"
...
This reverts commit 17d7d7856a
2018-04-28 23:24:41 +02:00
17d7d7856a
kasli: force hw_rev for the different targets
2018-04-28 21:30:29 +02:00
5d3c76fd50
sayma_rtm: use bitstream opts in migen
2018-04-27 15:43:32 +00:00
5f00326c65
suservo: coeff mem write port READ_FIRST
2018-04-27 15:43:32 +00:00
307cd07b9d
suservo: lots of gateware/ runtime changes
...
tested/validated:
* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback
individual changes below:
suservo: correct rtio readback
suservo: example, device_db [wip]
suservo: change rtio channel layout
suservo: mem ports in rio domain
suservo: sck clocked from rio_phy
suservo: cleanup, straighten out timing
suservo: dds cs polarity
suservo: simplify pipeline
suservo: drop unused eem names
suservo: decouple adc SR from IIR
suservo: expand coredevice layer
suservo: start the correct stage
suservo: actually load ctrl
suservo: refactor/tweak adc timing
suservo: implement cpld and dds init
2018-04-27 13:50:26 +02:00
Florent Kermarrec
8212e46f5e
sayma_amc: filter jesd refclk/sysref with jreset (hmc7043 can generate noise when unconfigured see sinara issue #541 )
2018-04-27 13:04:37 +02:00
f9b2c32739
suservo: add pgia spi channel
2018-04-25 17:14:25 +00:00
c83305065a
suservo: add servo/config/status register
2018-04-25 15:59:06 +00:00
105068ad90
suservo: fix restart timing
2018-04-25 15:19:49 +00:00
c304b6207a
suservo: drop adc idelays
2018-04-25 14:59:50 +00:00
b44d6517d1
suservo: use 125 MHz SDR ADC
...
* easier timing
* natural sampling on rising edge
* timing, signal robustness
* adjust the servo iteration timing
2018-04-25 14:32:23 +00:00
37c186a0fc
suservo: refactor, constrain
...
* remove DiffMixin, move pad layout handling to pads
* add input delay constraints, IDELAYs
2018-04-25 13:44:52 +00:00
d0258b9b2d
suservo: set input delays
2018-04-24 15:30:25 +00:00
fe75064c1e
suservo: cleanup rtio interface
2018-04-24 13:08:40 +00:00
3942c2d274
suservo: fix clkout cd drive
2018-04-24 10:18:32 +00:00
f74998a5e0
suservo: move arch logic to top, fix tests
2018-04-23 21:11:26 +00:00
4903eb074c
suservo: use BUFIO/BUFH for ADC
2018-04-23 18:30:19 +00:00
e36deab0a8
suservo/adc: try to help vivado extract srls
2018-04-23 18:30:19 +00:00
929ed4471b
kasli/SUServo: use suservo, implement urukul_qspi
...
m-labs/artiq#788
2018-04-23 18:30:18 +00:00
4c1e356f67
suservo: add pads rewiring layer for eems
2018-04-23 18:30:18 +00:00
99dd9c7a2a
suservo: fix rtio interface width
2018-04-23 18:30:18 +00:00
d5eea962ec
suservo: fix cnv_b diff
2018-04-23 18:30:12 +00:00
c8fd63754a
suservo: add unittests
...
m-labs/artiq#788
2018-04-23 18:25:59 +00:00
934c41b90a
gateware: add suservo
...
from
fe4b60b902m-labs/artiq#788
2018-04-23 18:24:59 +00:00
Florent Kermarrec
439d2bf2bc
sayma/serwb: adapt, full reset of rtm on link reset
2018-04-17 19:24:03 +02:00
Florent Kermarrec
8edf4541d6
serwb: adapt test
2018-04-17 19:21:53 +02:00
Florent Kermarrec
20ccc9d82f
serwb/core/phy: move scrambler in phy, add link test, revert delay min/max checks
2018-04-17 19:21:21 +02:00
Florent Kermarrec
ebfac36223
serwb/scrambler: dynamic enable/disable
2018-04-17 19:20:06 +02:00
Florent Kermarrec
816a6f2ec7
serwb/phys: remove phy_width (revert linerate to 1Gbps)
2018-04-17 19:19:18 +02:00
eac447278f
kasli: add MITLL variant
2018-04-17 19:00:11 +08:00
756e120c27
kasli/sysu: add comments
2018-04-17 18:46:55 +08:00
Florent Kermarrec
1acd7ea1db
sayma/serwb: re-enable scrambling
2018-04-17 00:49:36 +02:00
Florent Kermarrec
ca01c8f1cb
sayma: reduce serwb linerate to 500Mbps
2018-04-16 23:19:15 +02:00
Florent Kermarrec
825a2158ba
serwb: add phy_width parameter to allow reducing linerate to 500Mbps or 250Mbps
2018-04-16 23:19:14 +02:00
Florent Kermarrec
bb90fb7d59
sayma/serwb: remove scrambling (does not seems to work on sayma for now...)
2018-04-07 15:57:57 +02:00
Florent Kermarrec
6aa8e2c433
serwb/test: replace valid/ready with stb/ack
2018-04-07 15:55:57 +02:00
Florent Kermarrec
73dbc0b6b6
serwb/test: adapt to new version
2018-04-07 15:09:29 +02:00
Florent Kermarrec
e15f8aa903
sayma/serwb: enable scrambling
2018-04-07 14:52:37 +02:00
Florent Kermarrec
9d0e8c27ff
serwb/scrambler: add flow control
2018-04-07 14:51:17 +02:00
Florent Kermarrec
2f8bd022f7
sayma_rtm: remove sys0p2x clock
2018-04-07 03:10:34 +02:00
Florent Kermarrec
1fd96eb0fd
serwb: replace valid/ready with stb/ack
2018-04-07 03:06:19 +02:00
Florent Kermarrec
c8a08375f8
serwb: replace valid/ready with stb/ack
2018-04-07 03:03:44 +02:00
Florent Kermarrec
73b727cade
serwb: new version using only sys/sys4x clocks domains, scrambling deactivated.
2018-04-07 02:59:14 +02:00
Florent Kermarrec
dd21c07b85
targets/sayma_rtm: fix serwb 2 ...
2018-04-03 18:59:05 +02:00
Florent Kermarrec
7488703f23
targets/sayma_rtm: fix serwb
2018-04-03 18:57:00 +02:00
Florent Kermarrec
aef0153a8f
targets/sayma: adapt to new serwb clocking
2018-04-03 18:53:39 +02:00
Florent Kermarrec
3248caa184
gateware/serwb: move all clocking outside of serwb, use existing sys/sys4x clocks
2018-04-03 18:48:08 +02:00
f0771765c1
rtio: move CRI write comment to more appropriate location
2018-03-29 23:55:00 +08:00
493d2a653f
siphaser: add false path between sys_clk and mmcm_freerun_output
2018-03-29 10:55:41 +08:00
4229c045f4
kasli: fix DRTIO master clock constraint
2018-03-29 10:20:31 +08:00
3d89ba2e11
sayma: remove debug leftover
2018-03-29 10:20:17 +08:00
605292535c
kasli: ignore OSERDESE2->ISERDESE2 timing path on DRTIO targets as well
2018-03-29 10:12:02 +08:00
whitequark
bab6723ff2
Revert "gateware: don't run tests if there is no migen."
...
This reverts commit 4804cfef9b
2018-03-26 03:33:52 +00:00
whitequark
4804cfef9b
gateware: don't run tests if there is no migen.
...
This allows us to skip testing gateware on Windows.
2018-03-26 03:26:34 +00:00
3a0dfb7fdc
ad53xx: port monitor, moninj dashboard, kc705 target
2018-03-24 16:04:02 +01:00
1553fc8c7d
sed: reset valid in output sorter
2018-03-23 11:11:11 +00:00
770b0a7b79
novogorny: conv -> cnv
...
* parity with sampler
* also add novogorny device to opticlock
2018-03-21 18:38:42 +00:00
1afce8c613
kasli: simplify single eem pin formatting
2018-03-21 13:08:42 +01:00
d48b8f3086
kasli: fix sampler sdr/cnv pins
2018-03-21 09:28:00 +00:00
1fb5907362
kasli: add SUServo variant (Sampler-Urukul Servo)
2018-03-21 08:53:26 +00:00
f74d5772f4
sampler: add wide eem definition
2018-03-21 08:53:26 +00:00
32f22f4c9c
sayma: disable SERDES TTL entirely
...
Timing closure becomes very random, even at 4X.
2018-03-21 13:03:48 +08:00
f8c2d54e75
ttl_serdes_ultrascale: configurable SERDES ratio. Also try X4 on Sayma
2018-03-21 13:01:38 +08:00
9c2d343052
sayma: use SERDES RTIO TTL
...
This is not enabled on the standalone design as it breaks timing.
2018-03-21 10:53:52 +08:00
c8020f6bbd
ttl_serdes_generic: fix/upgrade test
2018-03-20 16:46:57 +08:00
a5825184b7
add ttl_serdes_ultrascale (untested)
2018-03-20 16:07:23 +08:00
fad066f1aa
ttl_serdes_7series: cleanup indentation
...
Inconsistent with other code and confuses text editors.
2018-03-20 15:50:04 +08:00
Thomas Harty
37d431039d
Fix typos.
...
Reduce ififo depth to 4 for Zotino.
2018-03-19 09:42:18 +00:00
Thomas Harty
c4fa44bc62
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 on OptiClock.
2018-03-18 00:25:43 +00:00
a315ecd10b
rtio/ttl_serdes_7series: reset IOSERDES ( #958 )
2018-03-14 09:01:29 +08:00
2fdc180601
dsp/fir: outputs reset_less (pipelined)
2018-03-13 17:11:50 +00:00
2edf65f57b
drtio: fix satellite minimum_coarse_timestamp clock domain ( #947 )
2018-03-13 00:20:57 +08:00
1d081ed6c2
drtio: print diagnostic info on satellite write underflow ( #947 )
2018-03-12 23:41:19 +08:00
Florent Kermarrec
eb6e59b44c
sayma_rtm: fix serwb timing constraints (was causing the gated clock warning)
2018-03-12 11:25:29 +01:00
6dfebd54dd
ttl_serdes_7series: use correct IBUFDS_INTERMDISABLE port names
2018-03-12 10:37:33 +08:00
fc3d97f1f7
drtio: remove spurious multichannel transceiver clock constraints
...
They used to cause (otherwise harmless) Vivado critical warnings.
2018-03-09 22:46:27 +08:00
caf7b14b55
kasli: generate fine RTIO clock in DRTIO targets, separate RTIO channel code
2018-03-09 22:36:16 +08:00
3fbcf5f303
drtio: remove TSC correction ( #40 )
2018-03-09 10:36:17 +08:00
e38187c760
drtio: increase default underflow margin. Closes #947
2018-03-09 00:49:24 +08:00
8bd15d36c4
drtio: fix error CSR edge detection ( #947 )
2018-03-08 16:28:25 +08:00
82831a85b6
kasli/opticlock: add eem6 phys
2018-03-07 21:32:59 +01:00
3a6566f949
rtio: judicious spray with reset_less=True
...
Hoping to reduce rst routing difficulty and easier RTIO timing closure.
2018-03-07 14:57:18 +00:00
b0282fa855
spi2: reset configuration in rio_phy
2018-03-07 14:42:11 +00:00
4af7600b2d
Revert "LaneDistributor: try equivalent spread logic"
...
This reverts commit 8b70db5f17
2018-03-07 11:34:51 +00:00
a6d1b030c1
RTIO: use TS counter in the correct CD
...
artiq/m-labs#938
2018-03-07 11:34:42 +00:00
8b70db5f17
LaneDistributor: try equivalent spread logic
2018-03-07 11:34:42 +00:00
2cbd597416
LaneDistributor: style and signal consolidation [NFC]
2018-03-07 11:34:42 +00:00
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
f7aba6b570
siphaser: fix phase_shift_done CSR
2018-03-07 10:57:30 +08:00
acfd9db185
siphaser: minor cleanup
2018-03-07 10:57:30 +08:00
7d98864b31
sayma: enable siphaser
2018-03-07 10:57:30 +08:00
a6e29462a8
sayma: enable multilink DRTIO
2018-03-07 10:57:30 +08:00
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
994ceca9ff
sayma_amc: disable slave fpga gateware loading
2018-03-06 17:27:43 +01:00
62af7fe2ac
Revert "kasli/opticlock: use plain ttls for channels 8-23"
...
This reverts commit bd5c222569eb68d624a5ac1e9f2542f6ee553f83.
No decrease in power consumption or improvement in timing.
2018-03-06 14:27:19 +01:00
fd3cdce59a
kasli/opticlock: use plain ttls for channels 8-23
2018-03-06 14:27:19 +01:00
50298a6104
ttl_serdes_7series: suppress diff_term in outputs
2018-03-06 14:27:19 +01:00
e356150ac4
ttl_simple: support differential io
2018-03-06 14:27:19 +01:00
956098c213
kasli: add second urukul, make clk_sel drive optional
2018-03-06 14:26:27 +01:00
07de7af86a
kasli: make second eem optional in urukul
2018-03-06 14:26:26 +01:00
c25560baec
sed: more LaneDistributor comments
2018-03-06 20:56:35 +08:00
f40255c968
sed: add comments about key points in LaneDistributor
2018-03-06 20:51:09 +08:00
Florent Kermarrec
5b3d6d57e2
drtio/gth: power down rx on restart (seems to make link initialization reliable)
2018-03-06 11:49:28 +01:00
Florent Kermarrec
64b05f07bb
drtio/gth: use parameters from Xilinx transceiver wizard
2018-03-06 11:02:15 +01:00
Florent Kermarrec
45f1e5a70e
drtio/gth: cleanup import
2018-03-06 10:56:07 +01:00
6aaa8bf9d9
drtio: fix link error generation
2018-03-04 23:20:13 +08:00
d747d74cb3
test: fix test_dma
2018-03-04 23:19:06 +08:00
928d5dc9b3
drtio: raise RTIOLinkError if operation fails due to link lost ( #942 )
2018-03-04 01:02:53 +08:00
ddcc68cff9
sayma_amc: move bitstream options to migen
...
close #930
2018-03-02 18:13:03 +08:00
a9daaad77b
kasli: add SYSU variant and device_db
2018-03-02 14:44:31 +08:00
cc70578f1f
remove old spi RTIO Phy
2018-03-01 11:19:18 +01:00
ec5b81da55
kc705: switch backplane spi to spi2
2018-03-01 11:19:18 +01:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
54984f080b
artiq_flash: flash RTM firmware
...
based on whitequark's work in f95fb27m-labs/artiq#813
2018-02-28 19:29:01 +01:00
1f999c7f5f
sayma_amc: expose RTM fpga load pins as GPIOs
2018-02-28 18:44:36 +01:00
Florent Kermarrec
2896dc619b
drtio/transceiver/gth: fix multilane
2018-02-28 14:15:40 +01:00
386aa75aaa
kasli: control SFP1 and SFP2 LEDs in DRTIO satellite to match master
2018-02-27 23:18:18 +08:00
5d81877b34
kasli: implement multi-link DRTIO on SFP1 and SFP2 of master
2018-02-27 23:15:20 +08:00
Florent Kermarrec
1f0d955ce4
drtio/transceiver/gtp: implement tx multi lane phase alignment sequence
2018-02-27 12:32:25 +01:00
e565d3fa59
kasli: add analyzer and RTIO log to DRTIO master target
2018-02-27 18:09:07 +08:00
Florent Kermarrec
5b0f9cc6fd
drtio/transceiver/gth: fix single transceiver case
2018-02-23 12:15:47 +01:00
Florent Kermarrec
b4ba71c7a4
drtio/transceiver/gth: implement tx multi lane phase alignment sequence (fix merge issue...)
2018-02-23 08:37:05 +01:00
Florent Kermarrec
820c834251
drtio/transceiver/gth: implement tx multi lane phase alignment sequence
2018-02-22 22:14:15 +01:00
1452cd7447
novogorny: add coredevice driver and test with Kasli
...
m-labs/artiq#687
2018-02-22 17:19:51 +01:00
3b7971d15d
kasli: spelling
2018-02-22 17:19:51 +01:00
771bf87b56
kc705: port amc101_dac/spi0 and sma_spi to spi2
2018-02-22 17:19:51 +01:00
f8e6b4f4e3
ad5360: port to spi2
...
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db
This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1
m-labs/artiq#926
2018-02-22 10:25:46 +01:00
fa0d929b4d
drtio: reorganize RX synchronizers
2018-02-22 15:21:23 +08:00
e5de5ef473
kasli: use deterministic RX synchronizer
...
Could not reproduce the "fully broken bitstream" bug.
2018-02-22 15:18:09 +08:00
a5ad1dc266
kc705: fix sdcard miso pullup
2018-02-21 19:41:05 +01:00
0d8145084d
test_spi: move to new spi2 core
2018-02-21 19:41:05 +01:00
a63fd306af
urukul: use spi2
...
* switch kc705 and kasli targets to spi2 gateware on urukul
* rewrite urukul, ad9912, ad9910
* update example experiments, device_dbs
2018-02-21 15:00:28 +00:00
37a0d6580b
spi2: add RTIO gateware and coredevice driver
...
1006218997
2018-02-21 13:37:36 +00:00
91a4a7b0ee
kasli: free run si5324 on opticlock for now
2018-02-21 13:37:29 +00:00
7a1d71502a
ttl_serdes_7series: drive IBUF and INTERM disables from serdes
2018-02-21 13:37:29 +00:00
476e4fdd56
ttl_serdes_7series: disable IBUF and INTERM when output
2018-02-21 13:37:29 +00:00
f060d6e1b3
drtio: increase A7 clock aligner check period
2018-02-20 18:50:35 +08:00
f15b4bdde7
style
2018-02-20 18:47:59 +08:00
7d9c7ada71
drtio: fix test infinite loop
2018-02-20 17:42:00 +08:00
ad2c9590d0
drtio: rewrite/fix reset and link bringup/teardown
2018-02-20 17:26:43 +08:00
7e02d8245c
kasli: false paths
...
* don't bother with the round trip OSERDESE2 -> ... -> pad -> ... ->
ISERDESE2
* clock groups with derived clocks c.f. migen 9c3a301
2018-02-19 13:05:11 +00:00
0f4549655b
sayma: use Xilinx RX synchronizer
...
Cannot be used on Kasli, this breaks the bitstream entirely (nothing on UART).
2018-02-19 17:49:53 +08:00
52049cf36a
drtio: add Xilinx RX synchronizer
2018-02-19 17:49:43 +08:00
3bc575bee7
drtio: add missing define for Sayma master
2018-02-19 17:11:21 +08:00
7376ab0ff8
drtio: fix Sayma after 83abdd28
2018-02-19 17:10:55 +08:00
Florent Kermarrec
f5831af535
drtio/transceiver/gtp_7series_init: don't reset gtp rx on power down
2018-02-19 10:03:19 +01:00
Florent Kermarrec
89a158c0c9
drtio/transceiver/gtp_7series_init: remove dead code
2018-02-19 10:02:23 +01:00
Florent Kermarrec
782051f474
drtio/transceiver/gtp_7series_init: add no retiming on gtp resets
2018-02-19 09:59:50 +01:00
c329c83676
kasli: fix disable_si5324_ibuf no_retiming
2018-02-19 12:19:05 +08:00
a93decdef2
kasli: disable DRTIO IBUFDS_GTE2 until Si5324 is initialized
2018-02-19 00:48:37 +08:00
94c20dfd4d
drtio: fix misleading GenericRXSynchronizer comment
2018-02-19 00:47:54 +08:00
83abdd283a
drtio: signal stable clock input to transceiver
2018-02-18 22:29:30 +08:00
287d533437
Revert "sayma_amc: remove RTM bitstream upload core. Closes #908 "
...
This reverts commit 2d4a1340ea
2018-02-17 17:38:48 +08:00
73985a9215
sayma: remove constraints at outputs of serwb PLL (see misoc d1489ed)
2018-02-17 17:38:17 +08:00
039dee4c8e
si5324: rename SI5324_FREE_RUNNING to SI5324_AS_SYNTHESIZER
...
The previous name was causing confusion with the FREE_RUN bit
that connects the crystal to CLKIN2.
2018-02-17 13:54:50 +08:00
cfb21ca126
si5324: fix usage of external CLKIN2 reference
2018-02-17 13:52:01 +08:00
e41f49cc75
kasli: opticlock 125 MHz, mark external reference case broken
2018-02-16 17:23:15 +00:00
4d42df2a7c
kasli: set up Si5324 in standalone operation
2018-02-15 20:32:58 +08:00
d7387611c0
sayma: print RTM gateware version
2018-02-15 19:31:58 +08:00
be693bc8a9
opticlock: examples
2018-02-13 22:13:40 +01:00
a3d136d30d
opticlock: wire urukul and novogorny
2018-02-13 22:13:40 +01:00
ab5f397fea
sed/fifos: use AsyncFIFOBuffered
...
(D)RTIO now passes timing at 150MHz on Kasli.
2018-02-13 20:02:51 +08:00
00f42f912b
rename 'RTM identifier' to 'RTM magic number'
...
Avoids confusion with the MiSoC identifier (containing the ARTIQ version).
2018-02-13 20:02:51 +08:00
96b948f57f
remote_csr: add sanity check of CSR CSV type column
2018-02-13 20:02:51 +08:00
Florent Kermarrec
bfdda340fd
drtio/transceiver/gtp_7series: use parameters from xilinx wizard
2018-02-13 00:23:59 +01:00
Florent Kermarrec
180c28551d
drtio/gateware/transceiver/gtp_7series: add power down state before reset on rx (seems to make restart reliable)
2018-02-09 20:17:02 +01:00
2d4a1340ea
sayma_amc: remove RTM bitstream upload core. Closes #908
2018-02-07 12:27:35 +08:00
whitequark
61c64a76be
gateware: use a per-variant subfolder in --output-dir. ( fixes #912 )
...
This commit also adds support for --variant and --args
to artiq-devtool.
2018-02-06 08:19:01 +00:00
whitequark
885ab40946
conda: split RTM and AMC packages back.
...
This avoids multiplying the RTM compilation time by the number
of AMC packages.
2018-01-28 14:27:55 +00:00
whitequark
11a8b84355
Merge the build trees of sayma_amc and sayma_rtm targets.
...
This also makes them a single artiq_flash target, and a single
conda package.
2018-01-27 19:54:31 +00:00
440e19b8f9
kasli: use SFP2 for DRTIO mastering
...
SFP1 PCB routing has some issues.
Also use SFP1 LED for DRTIO in both master and satellite.
2018-01-26 19:02:54 +08:00
e0e795f11c
sayma_amc: constrain pin, remove keep
2018-01-23 15:42:47 +00:00
b5c035bb52
sayma_rtm: constrain serwb clock input
2018-01-23 13:54:53 +00:00
aada38f508
kasli, kc705: remove vivado "keep", cleanup a constraint
2018-01-23 13:15:26 +00:00
85102e191e
sayma_rtm: derive clocks automatically
...
* also don't add false paths unless necessary
2018-01-23 11:00:55 +00:00
7d1b3f37c9
sayma_rtm: set CFGBVS/CONFIG_VOLTAGE, compress
2018-01-23 10:56:42 +00:00
649deccd9b
kasli: fix DRTIO satellite QPLL refclksel
2018-01-23 12:27:19 +08:00
4b4374f76a
sayma: register_jref for JESD204. Closes #904
2018-01-23 12:19:15 +08:00
763aefacff
kasli: fix typo
2018-01-23 12:10:54 +08:00
c7b148a704
kasli: when using both GTP clocks, send REFCLK0 to PLL0 and REFCLK1 to PLL1
2018-01-23 12:08:10 +08:00
d6157514c7
gtp_7series: flexible QPLL channel selection
2018-01-23 12:03:09 +08:00
9f87c34a94
kasli: fix QPLL instantiation
2018-01-23 10:39:31 +08:00
98a5607634
gtp_7series: set clock muxes correctly for second QPLL channel
2018-01-23 10:39:20 +08:00
25fee1a0bb
gtp_7series: use QPLL second channel
2018-01-23 10:15:49 +08:00
031d7ff020
kasli: keep using second QPLL channel for DRTIO satellite
2018-01-23 10:13:10 +08:00
626075cbc1
gtp_7series: simplify TX clocking
2018-01-23 09:49:23 +08:00
401e57d41c
gtp_7series: fix nchannels assert
2018-01-23 01:28:01 +08:00
aa62e91487
kasli: add DRTIO targets (no firmware)
2018-01-23 01:27:40 +08:00
296ac35f5d
sayma_amc: SFP TX disable is active-high
2018-01-23 00:32:09 +08:00
77192256ea
kc705: style
2018-01-23 00:02:35 +08:00
ab7c49d6d0
sayma_amc: raise error on invalid variant
2018-01-23 00:02:16 +08:00
c1ac3b66b1
sayma_rtm: fix 8fe463d4a
2018-01-23 00:01:45 +08:00
53facfef13
sayma: build fixes
2018-01-22 18:33:22 +08:00
25f3feeda8
refactor targets
2018-01-22 18:25:10 +08:00
5198c224a2
sayma,kasli: use new pin names
2018-01-22 11:51:07 +08:00
Florent Kermarrec
8fe463d4a0
sayma_rtm: add UART loopback to easily know if rtm fpga is alive
2018-01-20 06:04:34 +01:00
Florent Kermarrec
74ce7319d3
sayma: reduce serwb linerate to 625Mbps (make it work on saymas with 1.8v issue, related?)
2018-01-20 06:04:18 +01:00
Florent Kermarrec
d27727968c
add artix7 gtp (3gbps), share clock aligner with gth_ultrascale
2018-01-19 12:17:54 +01:00
cdbf95d46a
kasli: fix permissions
2018-01-19 18:31:20 +08:00
8ec33ae7bd
kasli: feed EEM clock fan-out from SI5324
2018-01-17 17:27:59 +01:00
ed3e3b2791
sayma_amc: clarify --with-sawg help
2018-01-17 12:10:30 +01:00
Florent Kermarrec
f54b27b79c
sayma_amc: prepare for jesd subclass 1
2018-01-17 11:49:36 +01:00
Florent Kermarrec
f73c3e5944
gateware/test/serwb: update and cleanup test (v2...)
2018-01-16 20:06:43 +01:00
7405006668
sayma: rtio clock is jesd fabric clock
2018-01-16 18:19:04 +01:00
whitequark
247167d34a
Revert "gateware/test/serwb: update and cleanup tests"
...
This reverts commit 5b03cc2fae
2018-01-16 08:21:26 +00:00
whitequark
444b901dbe
sayma: add RTM configuration port.
2018-01-16 07:28:00 +00:00
Florent Kermarrec
5b03cc2fae
gateware/test/serwb: update and cleanup tests
2018-01-15 21:53:40 +01:00
whitequark
6891141fa6
artiq_flash: add sayma support.
2018-01-15 11:43:29 +00:00
529033e016
kernel_cpu: disable PCU
...
* contributes to long timing paths on artix 7 (kasli)
* currently only used for testing and debugging
2018-01-12 12:03:50 +00:00
ac3c3871d0
kasli: s/extensions/variant/g
2018-01-12 12:29:42 +01:00
7c82fcf41a
targets: avoid passing cpu_type around unnecessarily
2018-01-11 11:21:55 +08:00
6d58c4390b
Merge branch 'sed-merge'
2018-01-10 13:14:39 +08:00
04b2fd3e13
sayma: fix AD9154NoSAWG ramp clock domain
2018-01-10 12:11:33 +08:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
Florent Kermarrec
2009734b3c
serwb/phy: get 625Mbps linerate working, increase timeout
2018-01-09 18:54:52 +01:00
Florent Kermarrec
9c6a7f7509
serwb/kusphy: use same serwb_serdes_5x reset than s7phy
2018-01-09 18:54:05 +01:00
8813aee6b1
targets: add kasli [wip, untested]
2018-01-04 16:12:12 +01:00
Florent Kermarrec
1e972034e8
gateware/targets: enable serwb scrambling on sayma amc & rtm
2018-01-03 17:34:46 +01:00
Florent Kermarrec
907af25a69
gateware/serwb: add scrambling, reduce cdc fifo depth
2018-01-03 17:34:03 +01:00
Florent Kermarrec
7f4756a869
gateware/serwb: cleanup packet
2018-01-03 17:30:12 +01:00
c2be820e9a
kc705_dds: make ext_clkout 100 MHz
2018-01-02 19:58:47 +01:00
43686f324b
kc705_dds: fix HPC voltages
...
* VADJ is 3.3 V due to the DDS card on LPC
* the LVDS standards need to be 2.5 V
* the direction control register on HPC (FMC-DIO to VHDCI)
was LVCMOS33 but while all the LVDS pairs are at VCCIO=VADJ=3.3 V
they were instantiated as LVDS_25 (ignoring the wrongly powered bank)
* we now use 2.5 V standards on HPC consistently despite VADJ=3.3 V
and hope for the best.
2018-01-02 13:41:07 +01:00
94b84ebe7c
kc705_dds: add urukul spi/ttl channels
2018-01-02 13:20:48 +01:00
53969d3686
kc705_dds: add urukul on vhdci extension definition
2018-01-02 13:20:47 +01:00
2f8e6c7462
spi: add diff_term, save power on outputs
2018-01-02 13:20:47 +01:00
6d20b71dde
ttl_serdes_7series: refactor IOSERDES
2018-01-02 13:20:47 +01:00
745e695b09
sayma: output a ramp in the absence of SAWG channels
2017-12-31 12:18:53 +01:00
whitequark
a371b25525
bootloader: allow using without Ethernet.
2017-12-31 09:21:28 +00:00
6e0288e568
drtio: fix GTH CPLL reset
2017-12-30 12:14:36 +08:00
379d29561b
sayma: plausibility assertion on sawg data stream
2017-12-29 19:15:40 +01:00
37f9c0b10c
spi: register clk
...
following m-labs/misoc#65
1dc68b0d0b
2017-12-28 16:50:22 +01:00
whitequark
acd13837ff
firmware: implement the new bootloader.
2017-12-28 13:18:51 +00:00
8153cfa88f
drtio/gth: add probes on {tx,rx}_init.done
2017-12-28 16:49:08 +08:00
c086149782
drtio/gth: use async microscope probes
2017-12-28 16:37:40 +08:00
whitequark
d94db1de5d
Revert accidentally committed parts of 1b9b5602.
2017-12-28 08:23:34 +00:00
whitequark
1b9b560242
firmware: use libbuild_misoc in libdrtioaux. NFC.
2017-12-28 08:20:23 +00:00
6801921fc0
drtio: instrument GTH transceiver
2017-12-28 15:03:14 +08:00
70b7f28ad3
drtio: drive SFP TX disable pins
2017-12-23 22:58:51 +08:00
f8c8f3fe26
drtio: fix GTH clock domains
2017-12-23 07:21:44 +08:00
1af21c0b29
drtio: integrate GTH transceiver for Sayma
2017-12-23 01:19:59 +08:00
c57b66497c
drtio: refactor/simplify GTH, use migen
2017-12-23 01:19:44 +08:00
77897228ca
drtio: add GTH transceiver code from Florent (197c79d47)
2017-12-22 18:01:28 +08:00
ebdbaaad32
drtio: remove KC705/GTX support
2017-12-22 17:51:42 +08:00
0681d472c7
conda: fix sayma_rtm_csr.csv location for Sayma AMC
2017-12-22 17:14:10 +08:00
44959144d8
conda: add Sayma AMC standalone board package
2017-12-22 16:44:04 +08:00
Florent Kermarrec
86825a852c
gateware/targets/sayma_rtm: add false path between cd_sys and cd_clk200
2017-12-21 23:52:44 +01:00
a6ffe9f38d
drtio: add Sayma top-level designs
2017-12-21 23:08:56 +08:00
4fbc8772a5
sayma: allocate all user LEDs to RTIO, make one TTL SMA input
2017-12-21 19:27:38 +08:00
a23251276d
Revert "sayma: set up Si5324 for RGMII clock rerouting"
...
This reverts commit 2b01aa22b6
2017-12-21 14:42:15 +08:00
2b01aa22b6
sayma: set up Si5324 for RGMII clock rerouting
2017-12-17 00:25:33 +08:00
b6199bb35b
sayma: style
2017-12-15 19:45:51 +08:00
649b60ea29
targets/kc705_drtio: remove DAC FMC card support
2017-12-15 17:32:25 +08:00
341e809859
targets/sayma_rtm: enable Allaki RF switches, GPIO access to attenuator
2017-12-15 13:08:35 +08:00
569484f888
remove phaser, adapt SAWG example to Sayma
2017-12-14 18:49:27 +08:00
5e251cd85c
sayma_amc: remove redundant bitstream options
...
* CONFIGRATE default is sufficient
* SPI width can be auto and QSPI works
2017-12-13 14:39:32 +01:00
a9d0f253a5
sayma_amc: set bitstream and config parameters
...
* slow down CCLK rate as there is additional loading
on the signals
* single bit SPI for now until we know that quad SPI
works
* set up
https://github.com/m-labs/artiq/issues/847
2017-12-13 21:21:52 +08:00
whitequark
1c25f7ef52
gateware: make software builds spew less junk on the console.
...
[ci skip]
2017-12-04 14:19:35 +00:00
bb3d6ef84a
sayma: remove ad9154 from mem_map
...
Address is autogenerated by CSR system.
2017-11-29 18:17:25 +08:00
ecfe2e40ee
sayma_amc_standalone: rtio channels for both sawg groups
2017-11-19 18:32:42 +01:00
d1a7c1c3a1
sayma_amc_standalone: connect sawg to jesd again
2017-11-19 14:36:20 +01:00
Florent Kermarrec
dfdd2dd9e6
gateware/targets/sayma_amc_standalone: revert self.add_wb_slave on serwb
2017-11-19 09:01:20 +01:00
Florent Kermarrec
cd83b71d92
gateware/targets/sayma_amc_standalone: serwb working, need fixing on AD9154 data mapping
2017-11-18 18:10:28 +01:00
Florent Kermarrec
f003566e52
serwb: fix rx_delay_inc on ultrascale, this was the issue serwb issue...
...
rx_delay_inc and rx_delay_ce were set for only one cycle, on ultrascale, these signals are translated to serwb_serdes_5x clock domain and we now set rx_delay_inc always to 1 (MultiReg), rx_delay_ce for one cycle (PulseSynchronizer)
2017-11-18 18:01:46 +01:00
Florent Kermarrec
1b976bfa4d
gateware/serwb/kusphy: use AsyncResetSynchronizer on cd_serwb_serdes_5x
2017-11-18 17:57:11 +01:00
Florent Kermarrec
464b24a608
gateware/targets/sayma_amc: integrate ad9154 correctly (add crg, use cpll instead of qpll, use correct clocking) and cleanup serwb constraints.
2017-11-10 10:48:32 +01:00
Florent Kermarrec
278c739d30
gateware/targets/sayma_rtm: add dynamic clock mux, cleanup serwb clock constraints
2017-11-10 10:39:47 +01:00
Florent Kermarrec
48bfaec8d3
gateware/serwb/phy: remove unnecessary rx_dly_rst (use wrap-around), fix typo & pep8
2017-11-10 10:37:08 +01:00
Florent Kermarrec
59be095512
gateware/serwb/kusphy: use locally inverted clk_b on iserdese3
2017-11-10 10:35:48 +01:00
Florent Kermarrec
db82b11f29
gateware/serwb/core: cleanup and increase fifo depth
2017-11-10 10:33:39 +01:00
Florent Kermarrec
76ddb063cf
gateware/targets/sayma: get hmc830/7043 spi working (still need to test clock generation)
2017-11-06 12:08:28 +01:00
Florent Kermarrec
5bd1e43ced
gateware/serwb: cleanup imports, use buffered SyncFIFO in EtherboneRecordSender
2017-11-03 12:15:14 +01:00
d80cf8d59d
kc705: add TTLs and shift register driver for FMC DIO
2017-10-31 23:14:39 +08:00
d5b5076f67
gateware/ad5360_monitor: fix SPI data decoding
2017-10-26 11:58:59 +08:00
412548a86c
gateware: add AD5360 monitor (untested)
2017-10-23 20:09:28 +08:00
5803ac9998
gateware: add Zotino SPI to NIST CLOCK target
2017-10-23 15:04:30 +08:00
4fa823b62a
gateware: add support for SPI-over-LVDS
2017-10-23 15:04:01 +08:00
893be82ad1
rtio/dma: raise underflow in test
2017-10-09 10:22:58 +08:00
a9c9d5779d
rtio/dma: add full-stack test with connection to RTIO core
2017-10-08 22:38:02 +08:00
5f083f21a4
rtio/dma: fix signal width
2017-10-08 22:37:46 +08:00
c7de233208
Merge Sayma SAWG changes (untested)
...
See #798
* sinara:
conda: bump migen
sayma_amc: SAWG (untested)
sayma_rtm: make build dir
conda: jesd204b 0.4
2017-09-29 21:01:02 +02:00
b4c52c34f7
Merge branch 'sinara'
2017-09-30 01:11:16 +08:00
6c049ad40c
rtio: report channel numbers in asynchronous errors
2017-09-29 16:32:57 +08:00
5437f0e3e3
rtio: make sequence errors consistently asychronous
2017-09-29 14:40:06 +08:00
5e3cc83842
sayma_amc: SAWG (untested)
2017-09-27 18:44:35 +02:00
2604806512
sayma_rtm: make build dir
2017-09-27 18:35:46 +02:00
73043c3464
drtio: disable SED lane spread
...
Doesn't improve things as the buffer space would still be determined
by the full FIFO, and adds unnecessary logic.
2017-09-26 16:46:09 +08:00
d7ef07a0c2
rtio/sed: document architecture
2017-09-26 16:44:23 +08:00
e6f0ce3aba
rtio/sed: test latency compensation
2017-09-26 16:11:21 +08:00
9905b8723b
rtio/sed: support negative latency compensation
2017-09-26 16:11:08 +08:00
f079ac6af6
rtio/sed: disable wait in TestLaneDistributor.test_regular
2017-09-26 16:10:52 +08:00
4112e403de
rtio/sed: latency compensation
2017-09-26 15:09:07 +08:00
e430d04d3f
drtio: remove obsolete import
2017-09-24 12:49:21 +08:00
20d79c930c
drtio: use SED and input collector
2017-09-24 12:23:47 +08:00
aa8fc81a87
rtio: allow specifying glbl_fine_ts_width externally
2017-09-23 22:34:55 +08:00
5cf0693758
rtio: use BlindTransfer to report collision and busy errors to sys domain
2017-09-21 22:31:56 +08:00
d74a7d272e
rtio: fix/cleanup parameters
2017-09-21 15:59:48 +08:00
07d3f87c51
rtio/sed: min_space → buffer_space
2017-09-21 14:36:13 +08:00
d8aa75b742
rtio/sed: add minimum buffer space reporting
2017-09-20 11:27:57 +08:00
63e39dec94
style
2017-09-20 11:26:12 +08:00
9ccd95e10d
drtio: remove spurious signals
2017-09-19 20:48:12 +08:00
7249f151a5
targets/kc705_drtio_satellite: add missing shebang line
2017-09-19 20:48:12 +08:00
171a2d19a0
drtio: remove spurious signals
2017-09-19 20:47:37 +08:00
1ff10785dc
targets/kc705_drtio_satellite: add missing shebang line
2017-09-19 20:46:16 +08:00
ddcd6065e8
rtio: drive InputCollector.coarse_timestamp
2017-09-19 17:46:38 +08:00
ff8e17ab89
rtio: use input collector module
2017-09-19 15:53:35 +08:00
4dc80e3d05
rtio: add missing import
2017-09-19 15:53:23 +08:00
06a0707c00
rtio: add simulation unit test for input collector
2017-09-19 15:30:44 +08:00
d37577a8a1
rtio: add input collector module
2017-09-19 15:30:30 +08:00
6dc9cad2c9
rtio: add explanation about cri.counter
2017-09-19 12:05:12 +08:00
81d6317053
rtio/sed: take global fine TS width
2017-09-18 11:30:49 +08:00
65baca8c57
rtio: clean up error-prone rtlink.get_or_zero()
2017-09-17 16:11:36 +08:00
0824e0aeae
gateware/targets: remove deprecated ofifo_depth parameter
2017-09-16 17:04:11 +08:00
e2c1d4f3d5
rtio/sed: trigger collision error on non-data replace
2017-09-16 17:01:23 +08:00
0e25154e25
rtio/sed: quash writes to LogChannel
2017-09-16 15:19:30 +08:00
1cfe90b1d9
rtio/sed/Gates: fix fine_ts_width computation
2017-09-16 15:09:21 +08:00
30e7765a2e
drtio: add missing import
2017-09-16 14:36:27 +08:00
a3bb6c167c
rtio: use SED
2017-09-16 14:13:42 +08:00
131f5e4a3b
rtio/sed/LaneDistributor: fix CRI address
2017-09-16 14:13:01 +08:00
25c644c663
rtio/sed: add top-level core unit test
2017-09-16 14:05:08 +08:00
a155a481b1
rtio/sed: add top-level core
2017-09-16 14:04:56 +08:00
92c63ce2e4
rtio/sed: rename fifos/gates, refactor tsc
2017-09-16 14:03:48 +08:00
ac52c7c818
rtio/sed/LaneDistributor: style
2017-09-16 14:02:37 +08:00
7b299ba583
rtio/sed: remove obsolete ofifo_depth from test_output_driver
2017-09-16 14:01:19 +08:00
6b7a1893c7
rtio/sed/OutputDriver: support channels with different fine timestamp widths
2017-09-16 10:53:30 +08:00
f39ee7ad62
rtio/sed: fix seqn_width
2017-09-16 10:52:37 +08:00
064503f224
rtio/sed/LaneDistributor: support specifying existing CRI
2017-09-16 10:52:13 +08:00
1cb05f3ed5
rtio/sed/LaneDistributor: persist underflow/sequence error until next write
2017-09-16 10:51:44 +08:00
3c922463a0
style
2017-09-15 15:36:46 +08:00
8e5ab90129
rtio/sed: add FIFO wrapper
2017-09-15 15:36:34 +08:00
490c9815a2
rtio/sed: add TSC/gate (untested)
2017-09-14 19:53:21 +08:00
181cb42ba8
rtio/sed: centralize all layouts in one file
2017-09-14 19:52:31 +08:00
1b61442bc3
rtio/sed: fix lane spreading and enable by default
2017-09-13 22:48:10 +08:00
8cfe2ec53a
rtio/sed: fix sequence number width computation
2017-09-13 22:11:41 +08:00
a92a955d1e
rtio/sed: use __all__
2017-09-13 18:17:22 +08:00
feec6298a5
rtio/sed: add lane distributor simulation unittest
2017-09-13 18:00:16 +08:00
c74abccfd5
rtio/sed: lane distributor fixes
2017-09-13 17:50:06 +08:00
bdd96084c5
rtio/sed: add lane distributor (untested)
2017-09-13 00:07:26 +08:00
faf54127ac
rtio/sed: remove VCD fine in unittest
2017-09-11 23:07:09 +08:00
a2b7894134
rtio/sed: add output driver simulation unittest
2017-09-11 23:05:10 +08:00
00ff3f5b0d
rtio/sed: fix output driver busy output
2017-09-11 23:04:52 +08:00
64d9381c36
rtio/sed: remove uneeded yield in test_sed_output_network
2017-09-11 23:02:56 +08:00
666bc600a2
rtio/sed: add output driver (untested)
2017-09-11 11:10:28 +08:00
1d2ebbe60f
rtio/sed: make ON payload layout configurable, add latency function
2017-09-11 09:06:40 +08:00
527b403bb1
rtio/sed: add output network simulation unittest
2017-09-10 23:41:20 +08:00
c5d6a2ba1a
rtio/sed: more output network fixes
2017-09-10 23:41:04 +08:00
96505a1cd9
rtio/sed: output network fixes
2017-09-10 23:23:10 +08:00
5646e19dc3
rtio/sed: add output network (untested)
2017-09-10 14:38:43 +08:00
Florent Kermarrec
2091c7696a
artiq/gateware/targets/sayma_amc_standalone: fix serwb_pll vco_div and serwb_phy mode
2017-09-06 09:18:12 +02:00
9edff2c520
remote_csr: interpret length as CSR size, not number of bus words
2017-08-31 13:34:48 +08:00
0a5904bbaa
firmware: support for multiple JESD DACs
2017-08-31 13:05:48 +08:00
a4144a07c4
sayma_amc: add converter SPI config defines
2017-08-31 13:04:38 +08:00
bacf8a1614
style
2017-08-31 12:52:09 +08:00
ad0a940e2d
sayma_rtm: hook up DAC SPI
2017-08-31 11:48:54 +08:00
f765dc50de
sayma_rtm: do not keep DACs in reset
2017-08-31 11:44:33 +08:00
a67659338d
sayma: clean up serwb comments
2017-08-31 11:42:01 +08:00
Florent Kermarrec
660f9856ec
gateware/serwb: add test for phy initialization
2017-08-30 17:59:10 +02:00
Florent Kermarrec
9650233007
gateware/serwb: change serdes clock domain to serwb_serdes
2017-08-30 15:44:44 +02:00
Florent Kermarrec
32ca51faee
gateware/targets/sayma_amc_standalone/rtm: use new serwb modules
2017-08-30 15:25:20 +02:00
Florent Kermarrec
41d57d64f6
gateware/serwb: SERWBPLL, SERWBPHY, SERWBCore and add checks in delay finding to verify the sampling window
2017-08-30 14:40:11 +02:00
Florent Kermarrec
9ba50098a8
gateware/test/serwb: use unittest for in test_etherbone
2017-08-29 17:31:01 +02:00
Florent Kermarrec
7d7f6be7ce
gateware/serwb: generate wishbone error if link loose ready in the middle of a transaction
2017-08-29 16:41:29 +02:00
Florent Kermarrec
60ad36e7d6
gateware/serwb: generate wishbone error on wishbone slave when access while link is not ready
2017-08-29 13:43:26 +02:00
Florent Kermarrec
89558e2653
gateware/serwb: for the initial version set delay in the center of the valid sampling window and don't use phase detectors
...
we'll use phase detectors later when it will be working reliably for both artix7 and kintex ultrascale
2017-08-29 13:38:52 +02:00
26a11a296c
sayma_rtm: drive DAC control signals
2017-08-26 16:57:02 -07:00
d609c67cbd
sayma_rtm: set clock mux pins
2017-08-26 16:48:10 -07:00
9194402ea5
sayma_rtm: expose HMC SPI bus
2017-08-26 16:31:31 -07:00
dbc12540da
sayma_amc: register RTM CSR regions from CSV
2017-08-26 14:48:11 -07:00
54c75d3274
sayma_rtm: use CSR infrastructure, generate CSR CSV
2017-08-23 17:19:53 -04:00
668450db26
sayma_amc: add serwb
2017-08-21 18:11:29 -04:00
0459a70cf6
sayma_amc: cleanup, fix RTM UART forwarding
2017-08-21 16:49:42 -04:00
1f2b373d09
sayma_rtm: remove unnecessary serwb_control
2017-08-21 16:37:13 -04:00
bfea297279
targets: add Sayma RTM
2017-08-21 15:58:01 -04:00
53c7f92fdc
serwb: add __init__.py and expose submodules
2017-08-21 15:57:43 -04:00
dac3a78b75
serwb: style, use migen, fix imports
2017-08-21 12:35:59 -04:00
Florent Kermarrec
da90a0fa12
Add test for Etherbone
...
Files copied directly from https://github.com/enjoy-digital/sayma_test @ 9ec62242659910ad1726beb00ff15b3f0a406615
2017-08-21 12:31:49 -04:00
Florent Kermarrec
44dc76e42e
Add serial Wishbone bridge
...
Files copied directly from https://github.com/enjoy-digital/sayma_test @ 9ce2cba87896d056819dc2edc54f0453a86162c3
2017-08-21 12:22:05 -04:00
d6b624dfbe
sayma_amc: connect RTM serial and second serial
2017-08-20 19:01:55 -04:00
bee4902323
add Sayma AMC standalone target
2017-08-20 11:47:45 -04:00
1dab7df846
kc705_sma_spi: fix permissions
2017-08-20 10:54:24 -04:00
df4f38a1e4
kc705: add pullup on SD card MISO
2017-07-24 22:26:16 +08:00
a201a9abd9
drtio: multilink transceiver interface
2017-07-18 13:27:33 +08:00
9045b4cc19
drtio: initial firmware support for multi-link
2017-07-18 00:40:21 +08:00
4deb5f6a45
gateware: use new MiSoC Wishbone address system
2017-07-13 19:16:49 +08:00
mntng
40ca951750
kc705: add SPI bus for memory card
...
This will be useful for SPI unit tests using a SD card as victim.
2017-07-12 00:27:44 +08:00
7b130a2c32
sawg: confirm smooth(order=3)
2017-07-07 11:36:03 +02:00
2f1029c292
Revert "sawg: advance dds 1/2 by one sample group"
...
This reverts commit 8e0a1cbdc8#772
The underlying issue is still the same. You will always find something that does not match when trying to compare the DDS with the parallelized DUC. They are just different. I could correct it for phase but then it will fail for amplitude. Or you'll compare the offset channel to phase1 or amplitude1. Let's state that equal things are well synchronized but unequal things may have a deterministic latency difference of strictly less than one coarse RTIO cycle.
2017-07-04 17:55:19 +02:00
8e0a1cbdc8
sawg: advance dds 1/2 by one sample group
...
closes #772
2017-07-04 16:51:58 +02:00
91ca9fbcad
sawg: also give offset some headroom
...
closes #771
2017-07-04 16:50:06 +02:00
78d1f0fdf6
sawg: fix PhasedAccu resets
2017-07-04 11:56:21 +02:00
Florent Kermarrec
2910b1be5e
artiq/gateware/rtio/dma: replace leave_out with omit in Record.connect
2017-07-04 10:48:06 +02:00
838127d914
rtio: break DMA timing path
2017-07-02 10:24:01 +08:00
911ee4a959
rtio: make pipelined logic reset_less
...
* latency-corrected counters
* registered error logic
2017-06-29 12:55:32 +02:00
600a48ac61
dsp.fir: cleanup
2017-06-29 12:18:48 +02:00
dca662a743
dsp.fir: pipeline final systolic adder
2017-06-29 11:33:19 +02:00
32a33500c8
dsp.fir: actively cull zero delays
2017-06-29 11:24:56 +02:00
f520d4a768
rtio: undo _RelaxedAsyncResetSynchronizer
2017-06-28 22:08:15 +02:00
3cbbcdfe96
sawg: don't enable_replace for Config
...
closes #762
2017-06-28 20:31:40 +02:00
f2632e0fd1
sawg: adapt latency to fir changes
...
closes #748
2017-06-28 20:12:30 +02:00
e7db2c6578
dsp.accu: reset_less outputs
2017-06-28 20:04:58 +02:00
6bb994228f
dsp.fir: drop x shift
2017-06-28 19:55:15 +02:00
01847271c5
rtio: use reset_less signal for reset fanout
2017-06-28 19:43:55 +02:00
b9859cc0c3
dsp.fir: remove old/wrong comment
2017-06-28 19:21:57 +02:00
55b5b87490
fir: simplify latency compensation
...
Don't try to tweak out the last bit of latency by feeding the HBF input
early. Instead feed it late so the interpolated samples are early and
the latency is an even multiple of the super-sample cycle.
2017-06-28 19:13:43 +02:00
