46dbc44c8f
rtio: export DMA and CRIInterconnectShared
2016-12-01 16:30:29 +08:00
6c97a97d8c
rtio: support single-master CRI arbiter
2016-12-01 16:30:11 +08:00
a318243083
rtio: CRI arbiter (untested)
2016-12-01 15:41:43 +08:00
cd3f68ba76
rtio: DMA core (untested)
2016-11-30 18:43:19 +08:00
d8b5eac856
sawg: style
2016-11-29 20:51:40 +01:00
27160f5912
phaser: make sysref input only for timing
2016-11-29 15:28:10 +01:00
cf342eca6e
kc705_drtio_master: fix number of fine RTIO timestamp bits
2016-11-29 10:44:27 +08:00
f4c6d6eb69
kc705_drtio_master: fix number of fine RTIO timestamp bits
2016-11-28 15:18:54 +08:00
85f2467e2c
rtio: fix RTIO/DRTIO timestamp resolution discrepancy
2016-11-28 15:01:46 +08:00
9fdd29ddae
drtio: connect KernelInitiator correctly
2016-11-28 14:36:18 +08:00
5460202220
drtio: typo
2016-11-28 14:35:21 +08:00
4e1b497742
drtio: typo
2016-11-28 14:34:58 +08:00
c419c422fa
drtio: support for local RTIO core
2016-11-28 14:33:26 +08:00
046b8bfd33
drtio: fix transmit datapath with transceiver width > max packet width
2016-11-27 13:19:12 +08:00
0903964488
drtio: large data fixes
2016-11-27 02:12:50 +08:00
8090abef5d
drtio: large data support
2016-11-25 17:04:09 +08:00
55e37b41ec
phaser: use ttl_simple.Input for sync
2016-11-24 15:55:26 +01:00
8060652913
phaser: use Inout_8X
2016-11-24 15:21:03 +01:00
617650f3b2
phaser: extract target
2016-11-24 15:20:51 +01:00
1c84d1ee59
Merge branch 'master' into phaser2
...
* master:
rtio: support differential ttl
RELEASE_NOTES: int(a, width=b) removal, use int32/64
pc_rpc: use ProactorEventLoop on Windows (#627 )
2016-11-24 15:05:49 +01:00
95c885b580
rtio: support differential ttl
2016-11-24 15:04:12 +01:00
7cd27abaa6
drtio: do not reset remote TSC on reset command
2016-11-24 00:09:53 +08:00
2d62a89143
rtio: use large data register
2016-11-23 23:23:27 +08:00
07f2d84275
drtio: remote resets
2016-11-23 23:19:31 +08:00
9941f3557d
rtio: use only CRI commands for rio/rio_phy resets
2016-11-23 23:19:14 +08:00
347609d765
rtio: auto clear output event data and address
...
This is to support channels where variable length
event data is well-defined through zero-padding.
E.g. in the case of `Spline` zero-padding of events naturally
corresponds to low-order knots.
Use timestamp change as trigger. This assumes that writes to the
timestamp register always precede address and data writes.
It does not break support for ganged writes of the same event
timestamp and data/address to multiple channels or
channel-addresses.
2016-11-23 15:03:36 +01:00
32fdacd95a
Merge remote-tracking branch 'm-labs/master' into phaser2
...
* m-labs/master:
runtime: don't attempt to perform writeback if disabled in kernel.
runtime: print trace level log messages to UART during startup.
runtime: support for targets without RTIO log channel
runtime: support for targets without I2C
kc705: remove stale DDS definition
runtime: show a prompt to erase startup/idle kernels.
2016-11-23 14:56:29 +01:00
d400c81cb2
rtio: remove debug print
2016-11-23 13:37:14 +08:00
4e931c7dd2
rtio: fix timestamp shift
2016-11-23 13:36:30 +08:00
e532261a9b
drtio: fix FullMemoryWE usage
2016-11-23 12:25:43 +08:00
0443f83d5e
runtime: support for targets without RTIO log channel
2016-11-23 10:50:55 +08:00
0c49679984
runtime: support for targets without RTIO log channel
2016-11-23 10:48:26 +08:00
ffefdb9269
rtio: fix counter readback
2016-11-23 00:54:47 +08:00
aa00627c0e
rtio: fix CRI CSRs
2016-11-22 22:57:04 +08:00
fbd83cf9ee
kc705: remove stale DDS definition
2016-11-22 22:48:22 +08:00
9acc7d135e
gateware: common RTIO interface
2016-11-22 22:46:50 +08:00
0aaf120ca7
kc705: remove stale DDS definition
2016-11-22 22:46:19 +08:00
3459793586
Merge branch 'master' into drtio
2016-11-22 15:15:22 +08:00
4160490e0a
Merge branch 'phaser' into phaser2
...
* phaser: (23 commits)
RELEASE_NOTES: update
pipistrello: add some inputs
Remove last vestiges of nist_qc1.
Fully drop AD9858 and kc705-nist_qc1 support (closes #576 ).
coredevice.dds: reimplement fully in ARTIQ Python.
compiler: unbreak casts to int32/int64.
analyses.constness: fix false positive on x[...].
inferencer: significantly improve the op-assignment diagnostic.
Fix tests.
Move mu_to_seconds, seconds_to_mu to Core.
artiq_devtool: don't crash on invalid utf-8.
artiq_devtool: detect a race condition during connect.
llvm_ir_generator: handle no-op coercions.
conda: use development version of migen/misoc
Revert accidentally committed code.
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
analyses.invariant_detection: implement (#622 ).
Fix whitespace.
coredevice.dds: work around the round(numpy.float64()) snafu.
coredevice.dds: update from obsolete int(width=) syntax (fixes #621 ).
...
2016-11-21 17:29:46 +01:00
f7e8961ab0
Merge branch 'master' into phaser
...
* master: (23 commits)
RELEASE_NOTES: update
pipistrello: add some inputs
Remove last vestiges of nist_qc1.
Fully drop AD9858 and kc705-nist_qc1 support (closes #576 ).
coredevice.dds: reimplement fully in ARTIQ Python.
compiler: unbreak casts to int32/int64.
analyses.constness: fix false positive on x[...].
inferencer: significantly improve the op-assignment diagnostic.
Fix tests.
Move mu_to_seconds, seconds_to_mu to Core.
artiq_devtool: don't crash on invalid utf-8.
artiq_devtool: detect a race condition during connect.
llvm_ir_generator: handle no-op coercions.
conda: use development version of migen/misoc
Revert accidentally committed code.
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
analyses.invariant_detection: implement (#622 ).
Fix whitespace.
coredevice.dds: work around the round(numpy.float64()) snafu.
coredevice.dds: update from obsolete int(width=) syntax (fixes #621 ).
...
2016-11-21 17:29:39 +01:00
93c310dfa5
pipistrello: add some inputs
2016-11-21 23:43:41 +08:00
whitequark
6aa5d9f6c6
Remove last vestiges of nist_qc1.
2016-11-21 15:36:22 +00:00
whitequark
5e8888d5f3
Fully drop AD9858 and kc705-nist_qc1 support ( closes #576 ).
2016-11-21 15:14:17 +00:00
whitequark
f4b7666768
coredevice.dds: reimplement fully in ARTIQ Python.
...
This commit also drops AD9858 support from software.
2016-11-21 15:13:26 +00:00
174c4be218
phaser: false paths sys<->{jesd,phy.tx}
2016-11-21 09:57:33 +01:00
74e5013fe5
sawg: fix b delay width
2016-11-20 16:39:22 +01:00
ad1049d59a
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
...
This reverts commit 4a62e09bd4
2016-11-20 21:35:07 +08:00
whitequark
30598720f4
Fix whitespace.
2016-11-20 09:50:00 +00:00
David Leibrandt
4a62e09bd4
gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623
2016-11-20 15:22:32 +08:00
12e39a64cf
sawg: reduce f0 oscillator width to 32
2016-11-19 17:07:07 +01:00
04813ea29b
sawg: wir up limiting, saturating addition
2016-11-19 16:12:27 +01:00
e53d0bcd5b
dsp: add limits support to SatAddMixin
2016-11-19 16:12:27 +01:00
97a54046e8
rtio: auto clear output event data and address
...
This is to support channels where variable length
event data is well-defined through zero-padding.
E.g. in the case of `Spline` zero-padding of events naturally
corresponds to low-order knots.
Use timestamp change as trigger. This assumes that writes to the
timestamp register always precede address and data writes.
It does not break support for ganged writes of the same event
timestamp and data/address to multiple channels or
channel-addresses.
2016-11-19 16:12:27 +01:00
b714137f76
phaser: 150 MHz rtio/jesd clock
2016-11-19 13:16:30 +01:00
02adae7397
drtio: fix link shutdown
2016-11-19 11:01:33 +08:00
381e58434f
drtio: handle link restarts at transceiver level
2016-11-19 10:46:56 +08:00
0ee47e77ae
phaser: fix widths
2016-11-18 17:24:11 +01:00
bcde26f990
Revert "phaser: cap phy data width to 64 temporarily"
...
This reverts commit 342b9e977e
2016-11-18 17:08:44 +01:00
ba94ed8f4b
drtio: check for absence of disparity errors before claiming RX ready
2016-11-19 00:05:59 +08:00
342b9e977e
phaser: cap phy data width to 64 temporarily
2016-11-18 15:46:59 +01:00
14ddcd2e30
Revert "dsp/Delay: reset_less"
...
for now
This reverts commit 98193d6fa1
2016-11-18 15:25:42 +01:00
d678bb3fb6
phaser: update sawg tests
2016-11-18 15:23:56 +01:00
4d07974a34
drtio: reset link from CPU
2016-11-18 17:45:33 +08:00
f040e27041
drtio: add timeout on FIFO get space request
2016-11-18 17:44:48 +08:00
bb047aabe9
drtio: simpler link layer
2016-11-17 22:32:39 +08:00
51f23feeac
dsp: implement sawg features
2016-11-17 03:20:37 +01:00
98193d6fa1
dsp/Delay: reset_less
2016-11-17 02:36:29 +01:00
424a1f8f4e
dsp: move test tools
2016-11-16 13:39:19 +01:00
140bb0ecee
drtio: aux controller fixes
2016-11-16 19:44:03 +08:00
6c9965b444
drtio: aux controller fixes
2016-11-15 12:02:41 +08:00
e1394db861
drtio: aux controller minor fixes
2016-11-14 17:26:30 +08:00
84bd962ed5
drtio: integrate aux controller
2016-11-14 17:20:47 +08:00
a4d92716da
drtio: fix aux receiver, add aux transmitter
2016-11-14 17:18:54 +08:00
b9ce2bb1f0
Merge branch 'phaser' into phaser2
...
* phaser: (127 commits)
phaser: use misoc cordic
phaser: fix DDS dummy cfg
runtime: disable the Nagle algorithm entirely.
runtime: buffer RPC send packets.
runtime: don't print debug messages to the UART.
runtime: print microsecond timestamps in debug messages.
artiq_devtool: abort if build failed.
conda: bump llvmlite-artiq dep.
conda: bump llvmlite-artiq dep.
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
artiq_devtool: more robust port forwarding.
setup: remove paramiko dependency (optional and developer-only)
artiq_devtool: implement.
artiq_compile: actually disable attribute writeback.
conda: use pythonparser 1.0.
conda: tighten pythonparser dependency (fixes #600 ).
doc: clarify kernel_invariant doc (fixes #609 ).
compiler: Emit all-kernel_invariant objects as LLVM constants
conda: update for LLVM 3.9.
add has_dds, use config flags
...
2016-11-13 17:30:37 +01:00
70a70320bd
phaser: use misoc cordic
2016-11-13 17:29:38 +01:00
2e482505c6
phaser: fix DDS dummy cfg
2016-11-13 17:08:59 +01:00
f2f131e0fb
drtio: add aux receiver (untested)
2016-11-14 00:04:53 +08:00
aedb6747f2
Merge branch 'master' into phaser
...
* master: (47 commits)
runtime: disable the Nagle algorithm entirely.
runtime: buffer RPC send packets.
runtime: don't print debug messages to the UART.
runtime: print microsecond timestamps in debug messages.
artiq_devtool: abort if build failed.
conda: bump llvmlite-artiq dep.
conda: bump llvmlite-artiq dep.
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
artiq_devtool: more robust port forwarding.
setup: remove paramiko dependency (optional and developer-only)
artiq_devtool: implement.
artiq_compile: actually disable attribute writeback.
conda: use pythonparser 1.0.
conda: tighten pythonparser dependency (fixes #600 ).
doc: clarify kernel_invariant doc (fixes #609 ).
compiler: Emit all-kernel_invariant objects as LLVM constants
conda: update for LLVM 3.9.
add has_dds, use config flags
Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
Revert "Revert "Revert "Update for LLVM 3.9."""
...
2016-11-13 16:54:28 +01:00
8a48d6d66e
drtio: fix typo
2016-11-09 22:15:42 +08:00
863934c4fa
drtio: more reliable link layer init
2016-11-09 22:03:47 +08:00
99ad9b5917
add has_dds, use config flags
2016-11-08 23:33:03 +08:00
95acc9b9d4
drtio: allow specifying 7series RXSynchronizer initial phase
2016-11-08 16:52:40 +08:00
bcb5053fb6
drtio: fix master TSC KCSR readout
2016-11-08 16:40:50 +08:00
c4cd269afc
Merge branch 'master' into drtio
2016-11-06 00:13:32 +08:00
d158c69be0
phaser: fix frequency comment
2016-11-05 16:54:23 +01:00
47b9868c68
kc705_drtio_master: pretend drtio is rtio
2016-11-05 23:48:29 +08:00
de065b7578
kc705_drtio_satellite: set output dir
2016-11-05 23:48:15 +08:00
de47123737
drtio: connect RST and LOCKED on 7series RXSynchronizer MMCM
2016-11-05 00:24:49 +08:00
df7294792c
drtio: break some RT features into manager, add echo request CSR
2016-11-04 19:38:24 +08:00
1145a193dd
drtio: fix ack of echo and set_time requests
2016-11-04 18:36:43 +08:00
3da1cce783
drtio: add packet counters
2016-11-04 17:53:42 +08:00
747da3da15
drtio: differentiate local and remote unknown packet type errors
2016-11-04 15:17:19 +08:00
f76aa249ce
drtio: squelch 7series RXSynchronizer outputs when MMCM is unlocked
2016-11-04 15:16:48 +08:00
6a75837261
drtio: fix link_layer remote RX ready detection
2016-11-03 20:15:04 +08:00
1d027ffa95
drtio: fix gtx_7series comma alignment
2016-11-03 20:14:11 +08:00
ba58a8affd
drtio/gtx_7series: paranoid reset deglitching
2016-11-02 18:30:22 +08:00
whitequark
00100148f1
Si5324: actually write value of N32 into registers.
2016-11-02 07:09:04 +00:00
bee9774bd5
drtio: add link layer status CSR
2016-11-02 13:09:13 +08:00
1ed3278783
remove stale TODO
2016-11-02 10:53:54 +08:00
whitequark
a6ae254796
Si5324: update to free run from XA/XB, with CKIN1 having priority.
2016-11-01 16:01:24 +00:00
whitequark
636d4efe81
gateware: rewrite mailbox to use bits_for.
2016-11-01 06:28:43 +00:00
whitequark
18ae8d54a3
gateware: fix mailbox.
2016-11-01 02:33:00 +00:00
whitequark
898a716b91
runtime: work around mor1kx ignoring low bits of reset address.
...
Fixes #599 .
2016-10-31 18:13:15 +00:00
0c1a76d668
unify rtio/drtio kernel interface
2016-11-01 00:30:16 +08:00
whitequark
617e345d16
gateware: fix kernel CPU exec address.
2016-10-31 15:16:35 +00:00
07ad00c1ca
drtio: split kernel/system CSRs
2016-10-31 18:09:36 +08:00
9aa94e1a2d
adapt to migen/misoc changes
2016-10-31 00:53:01 +08:00
2392113bb6
kc705: use misoc clock for false path
2016-10-30 11:16:04 +08:00
whitequark
2ac85cd40f
runtime: implement prototype background RPCs.
2016-10-29 21:34:25 +00:00
c656a53532
kc705: clean up clock constraints
2016-10-29 21:28:01 +08:00
ed4d57c638
use new Migen signal attribute API
2016-10-29 21:19:58 +08:00
da5208e160
drtio: add master gateware target
2016-10-29 17:31:15 +08:00
7c05dccf65
drtio: add support for 125MHz clock on GTX_1000BASE_BX10
2016-10-29 17:30:29 +08:00
95def81c03
drtio: squelch frame signals until link layer ready
2016-10-29 17:05:30 +08:00
4f6241283c
drtio: always use NoRetiming on MultiReg inputs
2016-10-29 16:37:53 +08:00
2a1e529dcf
phaser: DDS config dummies
2016-10-28 01:58:08 +02:00
6d07a16c62
Merge branch 'master' into phaser
...
* master: (72 commits)
gateware: extend mailbox to 3 entries.
master/worker_db: set default value for archive
master: keep dataset manager consistent when set_dataset is called with contradictory attributes
master: archive input datasets. Closes #587
master: ensure same dataset is in broadcast and local when mutating
scheduler: default submission arguments, closes #577
pdq2: sync with pdq2
doc: clarify usage of pause/check_pause, closes #571
dashboard/datasets: use scientific spinbox and increase number of decimals, closes #572
gateware/spi: fix import
runtime: fix use of $(realpath) in Makefile.
test: fix printf specifier.
llvm_ir_generator: make sure RPC allocations are not underaligned.
runtime: use i64 for watchdog timeout, not i32.
runtime: port ksupport to Rust.
runtime: remove some redundant libm functions copied inline.
language: Add "A" (ampere) as well-known unit for arguments
conda: misoc 0.4 (csr)
runtime: cap log level at debug.
runtime: discard unnecessary sections.
...
2016-10-28 01:40:11 +02:00
c428800caf
phaser: spi, sma_gpio: 2.5 V
2016-10-27 15:53:49 +02:00
65b2e4464c
phaser: sysref/sync diff term
2016-10-27 14:14:56 +02:00
ea0c304a0c
phaser2: wip
2016-10-27 01:00:42 +02:00
929a7650a8
drtio: fixes
2016-10-26 22:03:44 +08:00
45621934fd
drtio: forward errors to CSR
2016-10-26 22:03:05 +08:00
7f8e53aa5c
drtio: more fixes and tests
2016-10-26 11:48:47 +08:00
f763b519f4
drtio: fix channel selection
2016-10-26 00:33:21 +08:00
ad042de954
drtio: fixes, basic TTL working in simulation
2016-10-25 12:41:16 +08:00
e981b23548
phaser: use misoc cordic
2016-10-24 19:33:23 +02:00
d2f776b0d0
phaser: add more tools
2016-10-24 17:39:14 +02:00
a4e85081aa
drtio: more simple fixes
2016-10-24 23:32:49 +08:00
029e0d95b7
drtio: simple fixes
2016-10-24 23:10:15 +08:00
c39987b617
drtio: handle underflow/sequence error CSRs
2016-10-24 20:46:55 +08:00
7dd6eb2f5e
drtio: add RT write controller
2016-10-24 19:50:13 +08:00
83bec06226
drtio: fifo level -> fifo space
2016-10-24 15:59:12 +08:00
aa8e211735
drtio/rt_packets: fix
2016-10-22 13:03:35 +08:00
449d1c4dc6
rtio: export CDC modules
2016-10-22 13:03:10 +08:00
67c19ab178
drtio: RTPacketMaster RX, untested
2016-10-22 01:04:14 +08:00
3b4a40401a
drtio: RTPacketMaster TX (WIP)
2016-10-21 22:46:14 +08:00
1e313afe64
drtio: CrossDomainNotification
2016-10-21 22:45:45 +08:00
c71c4c89e0
drtio: change data direction in _CrossDomainRequest
2016-10-21 22:44:47 +08:00
whitequark
6872017449
gateware: extend mailbox to 3 entries.
2016-10-21 12:09:14 +00:00
6a88229e6a
drtio: CrossDomainRequest
2016-10-20 23:37:59 +08:00
9790c5d9ed
drtio/iot: FIFO level
2016-10-19 18:04:03 +08:00
71480c4d15
drtio: fix mmcm_mult
2016-10-18 17:28:03 +08:00
e7dbed3b02
gateware: KC705 satellite target
2016-10-17 19:23:45 +08:00
9752ffe3d1
drtio: various fixes
2016-10-17 19:23:08 +08:00
cce29e8b83
gateware/spi: fix import
2016-10-17 14:47:19 +08:00
b6002529cf
gateware/spi: fix import
2016-10-17 14:07:11 +08:00
85834976d9
gateware/spi: fix import
2016-10-17 14:06:35 +08:00
d3b274fc4d
drtio: synchronizer MMCM
2016-10-16 17:40:58 +08:00
03d3a85e75
drtio: RX clock alignment and ready
2016-10-15 18:36:27 +08:00
Florent Kermarrec
0259c80015
phaser/kc705: remove transceiver initialization workaround
2016-10-14 19:06:43 +02:00
d16068dd9b
sawg: absolute phase updates
2016-10-14 12:42:08 +02:00
b41b9de905
phaser: tag jesd as clock net
2016-10-14 10:46:33 +02:00
4ea3dea217
phaser: broad spectrum antibiotics with xilinx false paths
2016-10-14 10:22:03 +02:00
e400f8d672
phaser: add two more registers before jesd
2016-10-14 09:54:56 +02:00
3c9c42c779
phaser: drive rtio from jesd-bufg
2016-10-14 02:26:19 +02:00
808874a523
phaser: drive cd_jesd with BUFG
2016-10-14 01:57:48 +02:00
342d6d756e
phaser: bypass gtx phalign
2016-10-14 00:59:53 +02:00
89150c9817
phaser: 10G line rate
2016-10-14 00:53:38 +02:00
08e4aa3e3f
drtio: GTX WIP
2016-10-14 00:36:13 +08:00
c548a65ec3
drtio: clock domains
2016-10-14 00:34:59 +08:00
42c6658ffe
phaser: add some more blinking leds
2016-10-13 15:21:27 +02:00
6a456bd7d4
phaser: feed correct sink (crucial)
2016-10-13 15:17:38 +02:00
c8e45ae3f6
phaser: cleanup jesd phy instantiation a bit
2016-10-13 14:43:24 +02:00
78a41eec8f
phaser: kc705: syntax
2016-10-13 12:38:32 +02:00
Florent Kermarrec
af0e8582a2
phaser: use new jesd clocking
2016-10-13 11:51:06 +02:00
1117fe191b
phaser: support core stpl
2016-10-12 12:03:29 +02:00
f515c11f26
phaser: fix refclk period spec
2016-10-11 20:13:34 +02:00
bae5b73155
phaser: comment out stpl test
2016-10-11 19:50:19 +02:00
2b1cca2e7e
phaser: stpl
2016-10-11 19:29:27 +02:00
018f6d1b52
drtio: implement basic IOT
2016-10-11 17:59:22 +08:00
18d18b6685
phaser: add sync ttl input for monitoring
2016-10-10 17:13:23 +02:00
f5f7acc1f8
ttl_simple: add pure Input
...
(no Tristate for internal signals)
2016-10-10 17:13:23 +02:00
a40b39e9a2
drtio: structure
2016-10-10 23:12:12 +08:00
Florent Kermarrec
c08caae171
phaser: use qpll
2016-10-10 17:05:42 +02:00
87ec333f55
drtio: implement basic writes, errors, fifo levels on satellite
2016-10-10 00:13:41 +08:00
23b3302200
drtio: implement TSC load in satellite
2016-10-07 19:30:53 +08:00
9b860b26e8
phaser: fix rtio pll inputs
2016-10-07 13:00:42 +02:00
09434ec054
phaser: also adapt rtio_crg
2016-10-07 12:44:22 +02:00
cb0d1549c6
drtio: add rt_packets TX datapath, fixes
2016-10-07 15:35:29 +08:00
Florent Kermarrec
b02a7234f6
phaser: use 125MHz refclk for jesd
2016-10-07 08:59:34 +02:00
whitequark
b52ecda1d5
runtime: make memory map saner.
2016-10-06 18:05:38 +00:00
1193ba4bf4
ad9154: merge csr spaces
2016-10-06 16:21:15 +02:00
4d87f0e9e0
phaser: instantiate jesd204b core, wire up
2016-10-06 14:44:22 +02:00
76bac21d14
drtio: RT RX datapath, untested
2016-10-06 18:51:20 +08:00
4a0eaf0f95
phaser: add jesd204b rtio dds
...
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
2016-10-05 16:17:50 +02:00
a91ed8394c
rtio: add input-only channel
2016-10-05 16:17:50 +02:00
279f0d568d
rtio: support differential ttl
2016-10-05 16:17:50 +02:00
1e0c6d6d5d
drtio: monitor received link_init
2016-09-30 11:25:06 +08:00
cefb9e1405
drtio: add full link layer
2016-09-27 21:41:57 +08:00
08772f7a71
drtio: add RX ready signaling
2016-09-27 19:02:54 +08:00
95d7cba34a
drtio: fixes, add aux packet test
2016-09-27 12:46:01 +08:00
e59142e344
drtio: use additive scrambler reset by link init
2016-09-27 11:38:05 +08:00
8a92c2c7e5
drtio: add RX link layer, fixes, simple loopback demo
2016-09-27 11:23:29 +08:00
4e47decdbc
drtio: add scrambler/descrambler and test
2016-09-26 14:14:14 +08:00
fa83ad0d9c
drtio: add TX link layer
2016-09-26 12:53:10 +08:00
8280e72e90
gateware: use new misoc CSR mapping API
2016-09-24 20:48:37 +08:00
2bb90a4449
pipistrello: shrink a few more fifos
2016-09-21 02:29:05 +02:00
a7dd356d30
rtio/phy/ttl: support 'set sensitivity and sample' command ( #218 )
2016-09-07 15:42:09 +08:00
051e6e0447
spi: use misoc SPIMachine, closes #314
2016-08-26 14:08:12 +02:00
92f3757c74
spi: give wb-reads a register level
2016-07-31 14:53:19 +02:00
454b48df97
pipistrello: shrink fifos a bit more to relax pnr
2016-07-23 12:55:49 +02:00
7a2405146a
rtio: do not reset DDS and SPI PHYs on RTIO reset ( #503 )
2016-07-09 10:07:19 +08:00
8cb29fcb3b
targets/kc705: redefine user SMAs as 3.3V IO. Closes #502
2016-07-07 14:53:01 +08:00
71921de5bd
spi: do not shift when starting a xfer, closes #495
2016-07-04 12:22:47 +02:00
3bd190e624
gateware/nist_clock: increase DDS bus drive strength. Closes #468
2016-06-07 11:08:19 -04:00
dhslichter
141edb521a
qc2: swap SPI/TTL, all TTL lines are now In+Out compatible
2016-05-19 10:42:03 +08:00
90e678a442
gateware/nist_qc2: increase DDS bus drive strength. Closes #421
2016-05-03 16:29:38 +08:00
9707981c07
targets/kc705: fix default -H option
2016-04-30 00:30:24 +08:00
212ee8ca35
gateware/nist_qc2: substitute FMC
2016-04-14 01:02:34 +08:00
dhslichter
f395a630e0
Updated qc2 pinouts for SPI and 2x DDS bus, update docs
2016-04-13 18:38:34 +08:00
ed1c368e73
gateware: name targets consistently. Closes #290
2016-04-05 16:07:29 +08:00
8f54a1e619
pipistrello: sys_clk 83 -> 75 MHz
...
This should close #341 once migen generates stable output.
2016-03-21 13:47:32 +01:00
900b0cc629
analyzer: make byte_count 64-bit
2016-03-19 19:40:23 +08:00
0e1f75ec49
targets/kc705/qc2: hook up HPC backplane
2016-03-16 16:19:56 +08:00
1bbef94061
analyzer: fix byte_count (again)
2016-03-15 20:49:07 +08:00
85ea70a664
analyzer: fix byte_count
2016-03-15 20:33:08 +08:00
62ac4e3c2e
analyzer: fix EOP generation
2016-03-15 20:25:02 +08:00
b5ec979db3
analyzer: drive wishbone cyc signal
2016-03-15 19:46:12 +08:00
8a6873cab2
analyzer: use EOP, flush pipeline on stop
2016-03-15 17:49:59 +08:00
Florent Kermarrec
8ad799a850
gateware/rtio/analyzer: use new Converter
2016-03-14 15:15:07 +01:00
de718fc819
rtio: fix different address collision detection
2016-03-10 12:15:36 +08:00
f4f95d330b
Merge branch 'master' of github.com:m-labs/artiq
2016-03-10 11:15:30 +08:00
542a375305
rtio: remove NOP suppression capability
...
Back when RTIO was driving TTLs, this functionality made it simpler to use by removing some irrelevant underflows.
The same technique is not applicable to DDS and SPI, so the user will have to deal with such underflows.
This patch makes the behavior of RTIO more consistent and the code simpler.
2016-03-10 09:47:29 +08:00
2e39802a61
rtio/wishbone: make replace configurable
2016-03-10 09:44:05 +08:00
107e5cfbd4
gateware/rtio: factor _BlindTransfer
2016-03-09 19:07:46 +01:00
349a66124b
Merge branch 'master' into rtiobusy
...
* master:
coredevice: fix _DDSGeneric __init__ args
rtio/core: fix syntax
rtio: disable replace on rt2wb channels
examples: dds_bus -> core_dds
fix more multi-DDS-bus problems
runtime: fix dds declarations
support for multiple DDS buses (untested)
2016-03-09 17:58:58 +01:00
3f8e431de6
rtio/core: fix syntax
2016-03-09 17:10:21 +01:00
03b53c3af9
rtio: disable replace on rt2wb channels
2016-03-09 23:37:04 +08:00
446dcfbfbc
Merge commit '9d1903a' into rtiobusy
...
* commit '9d1903a':
coredevice/i2c,ttl,spi: consistent device get
examples/device_db: remove --no-localhost-bind
Monkey-patch asyncio create_server (fixes #253 ).
pipistrello: drop ttls on pmod, add leds back in
pipistrello: try with fewer leds/pmod ttl
2016-03-09 11:55:08 +01:00
f0b0b1bac7
support for multiple DDS buses (untested)
2016-03-09 17:12:50 +08:00
f33baf339f
pipistrello: drop ttls on pmod, add leds back in
2016-03-08 23:34:51 +01:00
f39208c95a
pipistrello: try with fewer leds/pmod ttl
2016-03-08 22:10:47 +01:00
2cb58592ff
rtio: add RTIOBusy
2016-03-08 18:04:34 +01:00
0d431cb019
pipistrello: make pmod extension header, cleanup
2016-03-08 17:07:44 +01:00
a8fe3f50c3
pipistrello: grow fifos a bit (may make ise happier)
2016-03-08 16:17:37 +01:00
00d4775da5
pipistrello: shrink fifos a bit (may make ise happier)
2016-03-08 15:40:12 +01:00
9c11cda7dc
pipistrello: use ttl_simple for pmod[4:8]
2016-03-08 13:52:52 +01:00
104d641c59
pipistrello: move the spi channel like kc705
2016-03-08 13:30:05 +01:00
2180c5af7c
pipistrello: make pmod[4:8] available as ttls
2016-03-08 13:07:58 +01:00
e809e89571
pipistrello: adhere to pmod interface type 2 layout
2016-03-08 13:01:52 +01:00
2953b069dc
rtio: when rtlink addresses are different, issue collision not replace ( fixes #320 )
2016-03-08 15:58:25 +08:00
71105fd0d7
rtio: collision_error -> collision
2016-03-08 15:38:35 +08:00
e8b59b00f6
soc: use add_extra_software_packages, factor builder code
2016-03-07 00:18:47 +08:00
a8a74d7840
targets/kc705: enable I2C for all hardware adapters
2016-03-05 00:19:59 +08:00
7ff0c89d51
kc705.clock: add all spi buses
2016-03-04 00:03:48 +01:00
423ca03f3b
runtime: bit-banged i2c support (untested)
2016-03-03 17:46:42 +08:00
cfe72c72a2
gateware/kc705: add I2C GPIO core for QC2
2016-03-03 15:32:10 +08:00
a901971e58
gateware/soc: factor code to connect CSR device to kernel CPU
2016-03-03 15:12:15 +08:00
b662a6fcbd
gateware/nist_{clock,qc2}: do not conflict with KC705 I2C
2016-03-03 15:10:50 +08:00
9af12230c8
soc: add timer to kernel CPU system
2016-03-03 13:19:17 +08:00
0c97043a20
gateware/nist_clock: pin assignment corrections from David Leibrandt
2016-03-03 10:03:49 +08:00
d3f36ce784
kc705: add false paths for ethernet phy
...
* vivado prefers rsys_clk over sys_clk (despite the assignment hierarchy)
(We need DONT_TOUCH and/or KEEP verilog annotations to fix this)
2016-03-02 19:56:24 +01:00
2cc1dfaee3
kc705: move ttl channels together again, update doc
2016-03-01 19:40:32 +01:00
c2fe9a08ae
gateware.spi: delay only writes to data register, update doc
2016-03-01 14:14:38 +01:00
f2ec8692c0
nist_clock: disable spi1/2
2016-03-01 01:52:46 +01:00
da22ec73df
gateware.spi: rework wb bus sequence
2016-02-29 22:22:08 +01:00
12252abc8f
nist_clock: rename spi*.ce to spi*.cs_n
2016-02-29 22:21:18 +01:00
7ef21f03b9
nist_clock: add SPIMasters to spi buses
2016-02-29 22:19:39 +01:00
7ab7f7d75d
Merge branch 'master' into spimaster
...
* master:
artiq_flash: use term 'gateware'
targets/kc705-nist_clock: add clock generator on LA32 for testing purposes
doc: insist that output() must be called on TTLInOut. Closes #297
doc: update install instructions
coredevice: do not give up on UTF-8 errors in log. Closes #300
use m-labs setup for defaults
fix indentation
2016-02-29 20:47:52 +01:00
5fad570f5e
targets/kc705-nist_clock: add clock generator on LA32 for testing purposes
2016-03-01 00:35:26 +08:00
dd570720ac
gateware.spi: ack only in cycles
2016-02-29 17:29:37 +01:00
a0083f4501
Revert "gateware/rt2wb: only input when active"
...
This reverts commit 1b08e65fa1
2016-02-29 16:44:11 +01:00
cb8815cc65
Revert "gateware/rt2wb: support combinatorial ack"
...
This reverts commit f73228f248
2016-02-29 16:44:04 +01:00
f73228f248
gateware/rt2wb: support combinatorial ack
2016-02-29 15:40:55 +01:00
1b08e65fa1
gateware/rt2wb: only input when active
2016-02-29 14:56:29 +01:00
572c49f475
use m-labs setup for defaults
2016-02-29 21:35:23 +08:00
eb01b0bfee
gateware.spi: cleanup doc
2016-02-29 12:41:30 +01:00
948fefa69a
gateware.spi: style
2016-02-29 11:48:29 +01:00
ad34927b0a
spi: RTIO_SPI_CHANNEL -> RTIO_FIRST_SPI_CHANNEL
2016-02-29 11:35:49 +01:00
5480099f1b
gateware.spi: rewrite counter bias for timing
2016-02-29 02:28:19 +01:00
9a1d6a51a4
gateware.spi: shorten counters
2016-02-29 01:51:33 +01:00
8d7e92ebae
pipistrello: set RTIO_SPI_CHANNEL
2016-02-29 00:37:00 +01:00
9a881aa430
gateware.spi: simpler clk bias
2016-02-29 00:36:18 +01:00
d5893d15fb
gateware.kc705: make xadc/ams an extension header
2016-02-28 22:41:17 +01:00
312e09150e
kc705/clock: add spi bus for dac on ams101
2016-02-28 21:17:53 +01:00
f8732acece
rtio.spi: drop unused argument
2016-02-28 21:06:20 +01:00
3b6999ac06
gateware.spi: refactor, sim verified
2016-02-28 20:40:06 +01:00
bd9ceb4e12
gateware.spi: add complete spi master logic
2016-02-27 22:47:16 +01:00
ade3eda19a
gateware.pipistrello: use pmod for spi
2016-02-27 11:29:40 +01:00
e7146cc999
gateware.spi: design sketch
2016-02-26 17:03:08 +01:00
fb929c8599
gateware/spi: stubs
2016-02-26 13:11:10 +01:00
a8545fc1f7
targets/kc705: set up user_sma_gpio_n like other TTLs
2016-02-22 22:35:15 +08:00
4946a53456
Revert "targets/kc705: pre-divide input RTIO clock to improve non-50% duty cycle tolerance"
...
This reverts commit 04b0db1a91
2016-02-22 17:52:40 +08:00
68891493a3
analyzer: move common to artiq.protocols
...
migen was still pulled in through rtio.__init__.py
2016-01-29 20:26:48 -07:00
d1119d7747
artiq_dir: move out of tools to unlink dependencies
2016-01-25 18:15:50 -07:00
cbb60337ae
refactor Analyzer constants to unlink dependencies
2016-01-25 18:03:48 -07:00
2832d200f2
Merge remote-tracking branch 'm-labs/master' into ppp2
...
* m-labs/master:
test/worker: update
gui/log: display level and date information in tooltips
master: add filename in worker log entries. Closes #226
master: finer control of worker exception reporting. Closes #233
conda: add artiq-kc705-nist_clock
gateware: add QC1 docstring
gateware: add clock target from David
gateware: clean up and integrate QC2 modifications from Daniel
add information about CLOCK hardware
2016-01-25 12:17:04 -07:00
8cbb60b370
Merge branch 'master' into ppp2
...
* master:
add release notes/process
targets/kc705: fix e664fe3Closes #238
transforms.inferencer: give a suggestion on "raise Exception".
pdq2/mediator: raise instances, not classes
pdq2: wire up more of the pipeline
doc: use actual version
Fix formatting.
doc: add artiq_flash
versioneer: remote tag_prefix = v
2016-01-20 19:29:00 -07:00
18f0ee814d
gateware: add QC1 docstring
2016-01-20 21:27:22 -05:00
db8ba8d6c1
gateware: add clock target from David
2016-01-20 21:23:49 -05:00
b3ba97e431
gateware: clean up and integrate QC2 modifications from Daniel
2016-01-20 21:17:19 -05:00
fa1afb7dd8
add information about CLOCK hardware
2016-01-20 21:06:02 -05:00
cb5fd08713
targets/kc705: fix e664fe3
2016-01-20 09:38:44 -05:00
e664fe38b0
targets/kc705: fix DDS_RTIO_CLK_RATIO for AD9914. Closes #238
2016-01-20 09:18:50 -05:00
57ce78c54d
pipistrello: add rtio.Analyzer()
2016-01-18 19:17:44 -07:00
whitequark
9366a29483
Implement core device storage ( fixes #219 ).
2016-01-10 13:04:55 +00:00
whitequark
577108554f
Move kernel CPU address space up to 0x40800000.
2016-01-07 18:26:11 +00:00
87dd09a71c
gateware: compress bitstreams
2016-01-06 15:40:28 -07:00
04b0db1a91
targets/kc705: pre-divide input RTIO clock to improve non-50% duty cycle tolerance
2015-12-29 17:00:57 +08:00
ba6c527819
gateware/targets: add RTIO log channels
2015-12-26 22:44:01 +08:00
080752092c
gateware/rtio: add LogChannel
2015-12-26 22:43:28 +08:00
9ba8dfbf23
gateware/rtio/core: avoid potential python bug
2015-12-26 22:11:57 +08:00
8691f69a3c
gateware/rtio/analyzer: suppress spurious initial reset messages
2015-12-21 18:32:08 +08:00
5769107936
gateware/rtio: keep counter clock domain transfer active during CSR reset
2015-12-20 22:12:34 +08:00
46f59b673f
coredevice: analyzer message decoding
2015-12-20 14:34:16 +08:00
1638f0fa9b
gateware/rtio/analyzer: fix event ordering
2015-12-19 17:04:30 +08:00
64ad38854b
gateware/rtio/analyzer: fix exception message layout
2015-12-18 18:27:06 +08:00
59a3ea4f15
gateware/rtio/analyzer: fix bus write
2015-12-18 15:44:20 +08:00
4def561710
targets: integrate RTIO analyzer
2015-12-16 17:36:52 +08:00
afaad270cc
rtio/analyzer: fix superficial mistakes
2015-12-16 17:36:36 +08:00
33860820b9
gateware/soc: use new SDRAM API call
2015-12-16 14:59:35 +08:00
bf29e8ddc6
kc705: make config[] usage consistent
2015-12-15 12:14:30 -07:00
4362f97d67
gateware/rtio/analyzer: complete, untested
2015-12-14 23:53:14 +08:00
b5f2e178f6
rtio/analyzer: message encoder
2015-12-14 00:37:08 +08:00
7886827b80
CSRConstant: also port DDS constants
2015-12-04 18:27:59 +08:00
5db1f9794e
top.add_constant() -> top.config[] (CSRConstant)
...
This is to be synchronized with the corresponding change in misoc.
2015-12-04 18:27:54 +08:00
whitequark
c14299dca8
Merge branch 'new-py2llvm'
2015-11-24 03:01:54 +08:00
whitequark
9fc7a42036
pipistrello: expose LED{1..4} as RTIO channels.
2015-11-23 18:26:45 +08:00
ae99af27ee
runtime,gateware: use new misoc identifier
2015-11-10 22:44:38 +08:00
e749bae302
package everything to rebuild core device binaries
2015-11-09 10:47:14 +08:00
whitequark
51f04f6311
Explicitly use the python3.5 binary everywhere.
2015-11-07 13:39:39 +03:00
ad5a32fb6e
targets/kc705: remove unneeded argument on qc2
2015-11-04 20:09:37 +08:00
e26147b2ac
gateware,runtime: use new migen/misoc
2015-11-04 00:35:03 +08:00
e46ba83513
rtio/dds: use rio_phy domain to reset FTW tracker. Closes #120
2015-10-04 22:53:51 +08:00
01416bb0be
copyright: claim contributions
...
These are contributions of >= 30% or >= 20 lines (half-automated).
I hereby resubmit all my previous contributions to the ARTIQ project
under the following terms:
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/ >.
Closes #130
Signed-off-by: Robert Jordens <jordens@gmail.com>
2015-09-06 16:08:57 -06:00
90ce54d8d5
gateware/dds/monitor: support onehot selection, strip reset
2015-08-27 15:54:01 +08:00
d38f1e6796
ad9xxx: fix gpio signal length
2015-08-22 13:12:30 +08:00
094fc1cfd1
qc2: DDS selection is active low
2015-08-22 11:49:38 +08:00
1d34c06d79
rtio: detect collision errors
2015-07-29 19:43:35 +08:00
fb339d294e
serdes_s6: no need to reset
2015-07-28 12:54:31 -06:00
9ac5bc52d4
rtio: add spartan6 serdes, 4x and 8x
2015-07-27 21:01:15 -06:00
b1d58bd4c8
rtio: fix replace/sequence_error when fine_ts_width > 0
2015-07-27 12:22:35 +08:00
959b7a7b46
rtio: resetless -> reset_less
2015-07-27 11:46:56 +08:00
fe6a5c42df
rtio: remove unused clk_freq argument
2015-07-27 10:57:15 +08:00
5b50f5fe05
rtio/ttl_serdes_7series: use recommended OSERDES T configuration
2015-07-27 10:50:50 +08:00
f68d5cbd73
rtio: forward rtio domain reset to rio and rio_phy domains
2015-07-27 01:52:47 +08:00
940aa815dd
rtio/ttl_serdes: cleanup/rewrite
2015-07-27 01:44:52 +08:00
Yann Sionneau
d90dff4ef1
rtio: add SERDES TTL (WIP)
2015-07-26 17:40:34 +08:00
47191eda91
dds monitor: relax timing (for pipistrello)
2015-07-19 21:36:51 -06:00
66940ea815
rtio: disable NOP suppression after reset and underflow
2015-07-15 20:54:55 +02:00
34aacd3c5f
complete AD9914 support (no programmable modulus, untested)
2015-07-08 17:22:43 +02:00
8a33d8c868
never stop RTIO counter
2015-07-07 15:29:38 +02:00
58c0150822
ttl: improve clockgen doc
2015-07-05 19:07:13 +02:00
753d61b38f
complete support for TTL clock generator
2015-07-04 18:36:01 +02:00
2881d5f00a
gateware: add RTIO clock generator
2015-07-02 18:20:26 +02:00
23eee94458
pipistrello: add notes to nist_qc1 about dds_clock
...
* remove xtrig from the target as it is not usually connected (used for
dds_clock) and ignore PMT2/BTN2 as C:15 is used for dds_clock.
* this also aligns the ttl channel numbers with kc705/nist_qc1 (two pmt
inputs followed by 16 ttl outputs followed by leds)
2015-06-28 20:56:12 -06:00
944bfafefa
soc: support QC2 and AD9914 (untested)
2015-06-28 21:37:27 +02:00
Yann Sionneau
9c96ebf7d4
nist_qc2: add fmc adapter io file
2015-06-25 03:06:15 +02:00
45ec5dbe84
ad9858: make wb data 8 bit wide
...
matches actual dds bus data width and saves bram
2015-06-20 23:53:01 -06:00
f47c2e54e1
DDS monitor fixes
2015-06-19 17:36:46 -06:00
5a9bdb2e33
DDS monitoring
2015-06-19 15:30:17 -06:00
Florent Kermarrec
38a0f63bd2
gateware/soc: use Minicon SDRAM controller and 128KB shared L2 cache
2015-06-18 12:18:03 +02:00
b2af0f6cc3
soc,runtime: support TTL override
2015-06-09 19:51:02 +08:00
a2ae5e4706
runtime: report TTL status over UDP
2015-06-03 18:26:19 +08:00
b81151eb42
soc: rtio monitor
2015-06-02 17:41:40 +08:00
cbb5027343
gateware/ad9858: use WaitTimer from Migen
2015-05-14 00:16:15 +08:00
a36c51eb83
DDS over RTIO (batch mode not supported yet)
2015-05-08 14:44:39 +08:00
a91bb48ced
gateware: adapt to misoc changes
2015-05-06 18:02:15 +08:00
9072647bdc
ad9858: make read timing configurable, increase read delays
2015-05-05 19:33:34 +08:00
cb65b1e322
rtio/phy/ttl_simple: reset sensitivity with RTIO logic
2015-05-02 16:17:31 +08:00
a61d701d47
rtio: decouple PHY reset from logic reset
2015-05-02 11:47:11 +08:00
62669f9ff2
soc: factor timer, kernel CPU and mailbox
2015-05-01 18:51:24 +08:00
9ecbb4c88d
gateware/amp/mailbox: simplify
2015-04-29 12:56:21 +08:00
27d94a22de
rtio: expose full_ts_width instead of counter_width parameter
2015-04-28 01:38:11 +08:00
e4251c7f41
runtime: get lwip to run
2015-04-22 15:01:32 +08:00
546996f896
coredevice,runtime: put ref_period into the ddb
2015-04-16 15:15:38 +08:00
71167b8adf
rtio: do not attempt latency compensation in gateware
2015-04-16 13:09:29 +08:00
6215d63491
rtio: do not create spurious CSRs when data_width/address_width is 0
2015-04-16 13:04:19 +08:00
26003781b4
rtio/rtlink: add 'like' methods to clone interfaces
2015-04-16 13:02:39 +08:00
30dffb6644
rtio/phy: add wishbone adapter
2015-04-15 20:39:40 +08:00
4c10182c9f
rtio: refactor, use rtlink
2015-04-14 19:44:45 +08:00
ff9a7727d2
rtio: add rtlink definition (currently unused)
2015-04-13 22:19:18 +08:00
7e591bb1c7
targets: use _Peripherals/UP/AMP class names, share QC1 IO defs
2015-04-07 00:07:53 +08:00
1ed60e0829
gateware/amp: use new ModuleTransformer API
2015-04-06 23:54:53 +08:00
c6d3750076
runtime,amp: set kernel memory start to SDRAM+128K, use custom linker file to split memory
2015-04-03 16:03:38 +08:00
Florent Kermarrec
2995f0a705
remove use of _r prefix on CSRs
2015-04-02 18:30:44 +08:00
5bd8d414cf
gateware/amp: add kernel CPU and mailbox modules
2015-04-02 16:49:36 +08:00
3122623c6f
rtio: make 63-bit timestamp counter the default [soc]
2015-03-12 13:13:35 +01:00
28bce9ee40
artiqlib -> artiq.gateware
2015-03-08 11:00:24 +01:00
