56aa22caeb
fastino: document/cleanup
...
* added documentation on `update`/`hold` mechanism
* mask machine unit values
* cleanup coredevice driver
close #1518
2020-09-03 17:44:26 +02:00
1b475bdac4
build_soc: remove assertion that was used for test runs
2020-09-03 20:24:18 +08:00
458a411320
metlino_sayma_ttl: Fix RTIO frequency & demo code ( #1516 )
2020-09-03 15:08:31 +08:00
47e88dfcbe
Revert "test: temporarily disable test_async_throughput"
...
This reverts commit f0289d49ab
2020-09-03 14:19:55 +08:00
002a71dd8d
build_soc: rename identifier_str to gateware_identifier_str
2020-09-02 00:00:57 +08:00
4398a2d5fa
test: relax loopback gate timing
2020-09-01 17:50:09 +08:00
f0289d49ab
test: temporarily disable test_async_throughput
...
M-Labs/artiq-zynq#104
2020-09-01 17:49:40 +08:00
8d5dc0ad2a
test: relax test_pulse_rate on Zynq
2020-09-01 17:08:26 +08:00
f294d039b3
test: skip NonexistentI2CBus if I2C is not supported
2020-09-01 16:47:04 +08:00
91df3d7290
build_soc: override identifier_str only for gateware
2020-09-01 10:46:39 +08:00
3d84135810
examples: add Metlino master, Sayma satellite with TTLOuts via FMC
2020-08-31 16:21:45 +08:00
dfbf3311cb
sayma_amc: add support for 4x DIO output channels via FMC
2020-08-31 16:21:45 +08:00
1ad9deaf91
fmcdio_vhdci_eem: fix pin naming
2020-08-31 16:21:45 +08:00
45ae6202c0
build_soc: add identifier_str override option
...
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
2020-08-31 11:48:58 +08:00
272dc5d36a
phaser: documentation
2020-08-28 16:36:44 +00:00
b2572003ac
RPC: optimization by caching
...
This reduced the calls needed for socket send/recv.
2020-08-28 14:58:34 +08:00
69f0699ebd
test: improved test_performance
...
1. Added tests for small payload.
2. Added statistics.
2020-08-28 14:58:34 +08:00
7cf974a6a7
comm_kernel: fix typo
2020-08-28 12:25:23 +08:00
68bfa04abb
phaser: trf readback strobe spi changes
2020-08-27 15:31:42 +00:00
96fc248d7c
phaser: synchronize multidds to frame
2020-08-27 14:28:19 +00:00
c10ac2c92a
phaser: add trf, duc, interfaces, redo body assembly, use more natrual iq ordering (i lsb)
2020-08-27 14:26:09 +00:00
e5e2392240
phaser: wire up multidds
2020-08-26 17:12:41 +00:00
d1be1212ab
phaser: coredevice shim, dds [wip]
2020-08-26 15:10:50 +00:00
aac2194759
Ported rpc changes to or1k
2020-08-26 14:17:06 +08:00
7181ff66a6
compiler: improved rpc performance for list and array
...
1. Removed duplicated tags before each elements.
2. Use numpy functions to speedup parsing.
2020-08-26 14:17:06 +08:00
cfddc13294
test: fixed test_performance
...
Added more tests and use normal rpc instead of async rpc.
Async RPC does not represent the real throughput which is limited by the
hardware and the network. Normal RPC which requires a response from the
remote is closer to real usecases.
2020-08-26 14:17:06 +08:00
20fcfd95e9
phaser: coredevice shim, readback fix
2020-08-24 15:46:31 +00:00
bcefb06e19
phaser: ddb template, split crc
2020-08-24 14:51:50 +00:00
11c9def589
phaser: readback delay, test fastlink
2020-08-24 14:49:36 +00:00
Paweł Kulik
eb350c3459
Drive SFP0 TX_DISABLE low during startup (as was in Kasli v1.1). Fixes Ethernet on SFP modules with pullup on this line.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2020-08-24 21:39:53 +08:00
63e4b95325
fastlink: rework crc injection
2020-08-23 19:41:13 +00:00
a27a03ab3c
fastlink: fix crc vs data width
2020-08-23 19:02:50 +00:00
7e584d0da1
fastino: use fastlink
2020-08-22 11:56:23 +00:00
3e99f1ce5a
phaser: refactor link
2020-08-22 11:56:23 +00:00
a34a647ec4
phaser: refactor fastlink
2020-08-22 11:56:23 +00:00
aa0154d8e2
phaser: initial
2020-08-22 11:56:23 +00:00
5f6aa02b61
gui: unbreak background
2020-08-14 13:14:45 +08:00
David Nadlinger
69718fca90
gui: Improve fuzzy-select heuristics
...
Even though the code already used non-greedy wildcards before,
it would not find the shortest match, as earlier match starts
would still take precedence.
This could possibly be sped up a bit in CPython by doing
everything inside re using lookahead-assertion trickery, but the
current code is already imperceptibly fast for hundreds of
choices.
2020-08-14 02:13:45 +01:00
a46573e97a
Revert "test: set uart log level to INFO for DMA tests"
...
This reverts commit b05cbcbc24
2020-08-13 12:44:33 +08:00
b05cbcbc24
test: set uart log level to INFO for DMA tests
2020-08-13 12:24:57 +08:00
48008eaf5f
test: omit unavailable math functions on OR1K
2020-08-12 15:01:13 +08:00
d8cd5023f6
runtime: expose more libm functions
2020-08-12 13:36:06 +08:00
David Nadlinger
c6f0c4dca4
test/coredevice: Ignore jagged 2D array embedding test for now
2020-08-10 00:23:38 +01:00
David Nadlinger
daf57969b2
compiler: Do not expand strings into TInt(8)s in array()
2020-08-09 23:46:45 +01:00
David Nadlinger
778f2cf905
compiler: Fix numpy.full, implement for >1D
2020-08-09 23:46:45 +01:00
David Nadlinger
53d64d08a8
compiler: Fix multi-dim slice error message test, tweak wording
2020-08-09 23:14:56 +01:00
David Nadlinger
d35f659d25
compiler: Add additional math fns available from Rust libm
2020-08-09 20:09:43 +01:00
David Nadlinger
a39bd69ca4
compiler: Implement numpy.rint() using llvm.round()
2020-08-09 19:44:58 +01:00
David Nadlinger
ae47d4c0ec
test/coredevice: Add host/device consistency checks for NumPy math
2020-08-09 19:15:43 +01:00
David Nadlinger
8e262acd1e
compiler: Slight array op implementation cleanup [nfc]
...
array_unaryop_funcs was never used; since the mangled names
are unique, a single dictionary would be nicer for overrides
anyway.s
2020-08-09 18:58:01 +01:00
David Nadlinger
33d931a5b7
compiler: Implement multi-dimensional indexing of arrays
...
This generates rather more code than necessary, but has
the advantage of automatically handling incomplete
multi-dimensional subscripts which still leave arrays
behind.
2020-08-09 17:08:43 +01:00
David Nadlinger
b00ba5ece1
compiler: Support explicit array(…, dtype=…) syntax
2020-08-09 17:08:43 +01:00
David Nadlinger
ad34df3de1
compiler: Support numpy.float
...
This would previously crash the compiler.
2020-08-09 17:08:43 +01:00
David Nadlinger
8783ba2072
compiler/firmware: RPCs for ndarrays
2020-08-09 17:08:43 +01:00
David Nadlinger
5472e830f6
compiler: Assume array()s are always rectangular
2020-08-09 03:54:42 +01:00
David Nadlinger
8eddb9194a
test/lit: Add smoke test for math function broadcasting
2020-08-09 03:54:42 +01:00
David Nadlinger
1c645d8857
compiler: Unbreak quoting of 1D ndarrays
...
Lists and arrays no longer have the same representation all
the way through codegen, as used to be the case.
This could/should be made more efficient later, eliding the
temporary copies.
2020-08-09 03:54:42 +01:00
David Nadlinger
df8f1c5c5a
compiler: Annotate math functions nounwind/nowrite
2020-08-09 03:54:42 +01:00
David Nadlinger
cc00ae9580
compiler: Implement broadcasting of math functions
2020-08-09 03:54:42 +01:00
David Nadlinger
be7d78253f
compiler: Implement 1D-/2D- array transpose
...
Left generic transpose (shape order inversion) for now, as that
would be less ugly if we implement forwarding to Python function
bodies for array function implementations.
Needs a runtime test case.
2020-08-09 03:54:42 +01:00
David Nadlinger
faea886c44
compiler: Implement array vs. scalar broadcasting
2020-08-09 03:54:42 +01:00
David Nadlinger
56a872ccc0
compiler: Insert array binop shape check in caller for location information
2020-08-09 03:54:42 +01:00
David Nadlinger
ef260adca8
compiler: Implement matrix multiplication
...
LLVM will take care of optimising the loops. This was still
unnecessarily painful; implementing generics and implementing
this in ARTIQ Python looks very attractive right now.
2020-08-09 03:54:42 +01:00
David Nadlinger
0da4a61d99
compiler: Fix method name typo [nfc]
2020-08-09 03:54:42 +01:00
David Nadlinger
78afa2ea8e
compiler: Support MatMult in inferencer
...
Still needs actual codegen support.
2020-08-09 03:54:42 +01:00
David Nadlinger
4d48470320
compiler: Support common numpy.* math functions
...
Relies on the runtime to provide the necessary
(libm-compatible) functions.
The test is nifty, but a bit brittle; if this breaks in the
future because of optimizer changes, do not hesitate to convert
this into a more pedestrian test case.
2020-08-09 03:54:41 +01:00
David Nadlinger
d37503f21d
compiler: T{C -> External}Function, clarify docs [nfc]
2020-08-09 03:54:41 +01:00
David Nadlinger
da255bee1b
compiler: Implement element type coercion for arrays
...
So far, this is not exposed to the user beyond implicit conversions.
Note that all the implicit conversions, such as triggered by adding
arrays of mismatching types, or dividing integer arrays, are currently
emitted in a maximally inefficient way, where a temporary copy is first
made for the type conversion. The conversions would more sensibly be
implemented during the per-element operations to save on the extra
copies, but the current behaviour fell out of the rest of the IR
generator structure without extra changes.
2020-08-09 03:54:41 +01:00
David Nadlinger
4426e4144f
compiler: Implement unary plus/minus for arrays
...
Implementation is needlessly generic to anticipate
coercion/transcendental functions.
2020-08-09 03:54:41 +01:00
David Nadlinger
0d8fbd4f19
test/lit: Add a test for matrix binary operations
...
No reason to believe other operations won't work the same.
(More exhaustive tests to follow using embedding for comparison
against NumPy.)
2020-08-09 03:54:41 +01:00
David Nadlinger
7bdd6785b7
test/lit: Basic ndarray smoke tests for all binops
2020-08-09 03:54:41 +01:00
David Nadlinger
4d002c7934
compiler: Explain use of rpc_tag() in array ops, formatting [nfc]
2020-08-09 03:54:41 +01:00
David Nadlinger
a7e855b319
compiler.types: Change invalid default value [nfc]
...
This wasn't actually ever used, but was a dict instead of a set.
2020-08-09 03:54:41 +01:00
David Nadlinger
48fb80017f
compiler: Implement basic element-wise array operations
2020-08-09 03:54:41 +01:00
David Nadlinger
9af6e5747d
compiler: Factor rpc_tag() out of llvm_ir_generator
2020-08-09 03:54:41 +01:00
David Nadlinger
e77c7d1c39
compiler: Add inferencer support for array operations
2020-08-09 03:54:41 +01:00
David Nadlinger
ef57cad1a3
compiler: Test ndarray element assignment
2020-08-09 03:54:41 +01:00
David Nadlinger
a9a975e5d4
language: Allow instantating TArray using bare ints
2020-08-09 03:54:41 +01:00
David Nadlinger
504b8f0148
language: Export TArray
2020-08-09 03:54:41 +01:00
David Nadlinger
dea3c0c572
compiler: Don't store redundant ndarray buffer length, match list layout
...
This adds `elt` to _TPointer and the ir.Offset IR instruction,
which is like GetElem but without the final load.
2020-08-09 03:54:41 +01:00
David Nadlinger
e82357d180
compiler: Fix inferencer tests after adding TArray.num_dims
2020-08-09 03:54:41 +01:00
David Nadlinger
cb1cadb46a
compiler: Fix/test 1D array construction from generic iterables
2020-08-09 03:54:41 +01:00
David Nadlinger
38c17622cc
compiler: Axis-wise iteration of ndarrays
...
Matches NumPy. Slicing a TList reallocates, this doesn't; offsetting
couldn't be handled in the IR without introducing new semantics
(the Alloc kludge; could/should be made its own IR type).
2020-08-09 03:54:41 +01:00
David Nadlinger
c95a978ab6
compiler: Iteration for 1D ndarrays
2020-08-09 03:54:41 +01:00
David Nadlinger
bc17bb4d1a
compiler: Parametrize TArray in number of dimensions
2020-08-09 03:54:41 +01:00
David Nadlinger
632c5bc937
compiler: Add ndarray .shape access
2020-08-09 03:54:41 +01:00
David Nadlinger
40f59561f2
compiler: Add test for length of empty arrays [nfc]
...
This makes sure we are actually emitting this as an 1D array
(like NumPy does).
2020-08-09 03:54:41 +01:00
David Nadlinger
d882f8a3f0
compiler: Implement len() for ndarrays
2020-08-09 03:54:41 +01:00
David Nadlinger
575be2aeca
compiler: Basic support for creation of multidimensional arrays
...
Breaks all uses of array(), as indexing is not yet implemented.
2020-08-09 03:54:41 +01:00
David Nadlinger
56010c49fb
compiler/inferencer: Detect rectangular array()s
...
Still needs support through all the rest of the compiler, and
support for higher-dimensional arrays.
Alternatively, we could always assume ndarrays of ndarrays
are rectangular (i.e. ban array/list element types), and
detect mismatch at runtime. This might turn out to be
preferrable to be able to construct matrices from rows/columns.
`array()` is disallowed for no particularly good reason but
numpy API compatibility.
2020-08-09 03:54:41 +01:00
David Nadlinger
6ea836183d
test/lit: Move some list tests to appropriate module [nfc]
2020-08-09 03:54:41 +01:00
pmldrmota
1df62862cd
AD9910: Write correct number of bits to POW register ( #1498 )
...
* coredevice.ad9910: Add return type hints to conversion functions
* coredevice.ad9910: Make set_pow write correct number of bits
The AD9910 expects 16 bits. Thus, if writing 32 bits to the POW register, the chip would likely enter a locked-up state.
* coredevice.ad9910: Correct data alignment in write_16
Co-authored-by: Robert Jördens <rj@quartiq.de>
* coredevice.ad9910: Add function to read from 16 bit registers
Co-authored-by: drmota <peter.drmota@physics.ox.ac.uk>
Co-authored-by: Robert Jördens <rj@quartiq.de>
2020-08-07 10:10:44 +02:00
504f72a02c
rtio: remove legacy i_overflow_reset CSR
2020-08-06 17:52:32 +08:00
5f36e49f91
test_rtio: make DMA test generic wrt TTL channel
2020-08-06 16:36:14 +08:00
3bfd372c20
compiler: linker discard local symbols.
...
Fixes exception backtrace problem for ARM.
2020-08-06 16:07:28 +08:00
e3c5775584
test: skip CacheTest.test_borrow on Zynq
2020-08-06 10:54:30 +08:00
David Nadlinger
ae999db8f6
compiler: Revert function call lifetime tracking fix
...
This reverts commits f8d1506922cf19c9512d
2020-07-30 16:40:39 +01:00
709026d945
test: relax device_to_host_rate
2020-07-30 17:46:22 +08:00
455e4859b7
simplify versioneer
...
Original version is very complex and still has a number of problems.
2020-07-30 00:54:07 +08:00
5fd0d0bbb6
gui: work around quamash bug with python 3.8
2020-07-28 12:08:47 +08:00
David Nadlinger
f8d1506922
compiler: Fix lifetime tracking for function call return values
...
GitHub: Fixes #1497 .
2020-07-28 00:33:28 +01:00
cw-mlabs
e4b16428f5
wrpll: fix run signal
2020-07-27 13:02:02 +08:00
cw-mlabs
8dd9a6d024
wrpll: fix scl signal
2020-07-27 12:59:32 +08:00
Charles Baynham
9b44ec7bc6
parameters: Allow forcing a NumberValue to return a float
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2020-07-27 12:25:51 +08:00
David Nadlinger
1c72585c1b
compiler: Handle None-returning function calls used as values
...
GitHub: Fixes #1493 .
2020-07-25 02:20:53 +01:00
David Nadlinger
57e759a1ed
compiler: Consistently use llunit through llvm_ir_generator [nfc]
2020-07-25 02:20:52 +01:00
2a2f5c4d58
comm_analyzer: make header error flag more general
2020-07-20 19:39:19 +08:00
553a49e194
test_moninj: set loop_out as output
2020-07-19 17:59:43 +08:00
8510bf4e55
test_analyzer: configure loop_out as output
2020-07-16 19:28:58 +08:00
eb28d7be3a
firmware/rpc: fixed typo
2020-07-16 15:15:47 +08:00
f78d673079
firmware/rpc: added #[repr(C)] for structs.
...
Previously the structs are in repr(Rust) which has no layout guarantee.
2020-07-16 15:11:17 +08:00
e31ee1f0b3
firmware/i2c: rewrite I2C implementation
...
* Never drive SDL or SDA high. They are specified to be open
collector/drain and pulled up by resistive pullups. Driving
high fails miserably in a multi-master topology (e.g. with
a USB I2C interface). It would only ever be implemented to
speed up the bus actively but that's tricky and completely
unnecessary here.
* Make the handover states between the I2C protocol phases (start, stop,
restart, write, read) well defined. Add comments stressing those
pre/postconditions.
* Add checks for SDA arbitration failures and stuck SCL.
* Remove wrong, misleading or redundant comments.
2020-07-15 16:43:07 +08:00
4340a5cfc1
rtio/dma: fix previous commit
2020-07-12 10:14:22 +08:00
f2e0d27334
rtio/dma: remove dead/broken code
2020-07-12 10:13:18 +08:00
901be75ba4
sayma_rtm: fix Si5324 reset
...
Closes #1483
2020-07-11 09:51:01 +08:00
8719bab726
Revert "i2c: duplicate TCA9548 control byte"
...
This reverts commit f265976df6
2020-07-08 19:02:02 +08:00
f273a9aacc
artiq_ddb_template: remove SFP LEDs on hw 2.0+
2020-07-08 18:15:36 +08:00
2d1f1fff7f
kasli_generic: do not attempt to use SFP LED for RTIO on 2.0+
2020-07-08 18:14:44 +08:00
85b5a04acf
test: print transfer rates in MiB/s
2020-07-07 17:28:47 +08:00
13501115f6
test: remove watchdog test ( #1458 )
2020-07-07 17:28:47 +08:00
f265976df6
i2c: duplicate TCA9548 control byte
2020-07-03 16:45:05 +08:00
David Nadlinger
3f0cf6e683
runtime: Stop kernel CPU before restarting comms CPU on panic
...
Before, the system would enter a boot loop when a panic occurred
while the kernel CPU was active (and panic_reset == 1), as
kernel::start() for the startup kernel would panic.
2020-07-01 17:29:05 +08:00
95807234d9
compiler: use binutils for ARM
...
This is mostly due to Windoze, where installing anything is a PITA and the LLVM tools won't be available soon.
2020-06-28 17:33:03 +08:00
89c53c35e8
dashboard: style
2020-06-26 10:12:03 +08:00
David Nadlinger
f36692638c
dashboard: Add "Quick Open" dialog for experiments on global shortcut
...
This is similar to functionality in Sublime Text, VS Code, etc.
2020-06-26 10:11:33 +08:00
David Nadlinger
966ed5d013
master/scheduler: Fix priority/due date precedence order when waiting to prepare
...
See test case – previously, the highest-priority pending run would
be used to calculate the timeout, rather than the earliest one.
This probably managed to go undetected for that long as any unrelated
changes to the pipeline (e.g. new submissions, or experiments pausing)
would also cause _get_run() to be re-evaluated.
2020-06-19 23:45:52 +01:00
David Nadlinger
7955b63b00
master: Always write results to HDF5 once run stage is reached
...
Previously, a significant risk of losing experimental results would
be associated with long-running experiments, as any stray exceptions
while run()ing the experiment – for instance, due to infrequent
network glitches or hardware reliability issue – would cause no
HDF5 file to be written. This was especially troublesome as long
experiments would suffer from a higher probability of unanticipated
failures, while at the same time being more costly to re-take in
terms of wall-clock time.
Unanticipated uncaught exceptions like that were enough of an issue
that several Oxford codebases had come up with their own half-baked
mitigation strategies, from swallowing all exceptions in run() by
convention, to always broadcasting all results to uniquely named
datasets such that the partial results could be recovered and written
to HDF5 by manually run recovery experiments.
This commit addresses the problem at its source, changing the worker
behaviour such that an HDF5 file is always written as soon as run()
starts.
2020-06-18 17:47:26 +01:00
David Nadlinger
d87042597a
master/worker_impl: Factor out "completed" message sending [nfc]
...
Just reduces the visual complexity/potential for typos a bit, and
we already have put_exception_report().
2020-06-18 01:30:46 +01:00
charlesbaynham
2429a266f6
ad9912: Fix typing problem on ad9912 ( #1466 )
...
Closes #1463
FTW and phase word were ambiguously typed, resulting in failure to compile
2020-06-16 20:17:22 +02:00
Harry Ho
1a17d0c869
zotino: add USER LED test
2020-06-11 16:03:56 +08:00
Harry Ho
6156bd4088
fastino: add tests using DACs and USER LEDs
2020-06-11 14:55:46 +08:00
a18d2468e9
test: do not build libartiq_support in lit.cfg
2020-06-10 17:15:24 +08:00
9822b88d9b
ad9910: fix asf range ( #1450 )
...
* ad9910: fix asf range
The ASF is a 14-bit word. The highest possible value is 0x3fff, not
0x3ffe. `int(round(1.0 * 0x3fff)) == 0x3fff`.
I don't remember and understand why this was 0x3ffe since the beginning.
0x3fff was already used as a default in `set_mu()`
Signed-off-by: Robert Jördens <rj@quartiq.de>
* RELEASE_NOTES: ad9910 asf scale change
Co-authored-by: David Nadlinger <code@klickverbot.at>
2020-05-29 11:13:26 +02:00
cb76f9da89
metlino: fix CSR collisions
...
Closes #1425
2020-05-29 15:59:44 +08:00
bd9eec15c0
metlino: increase number of DRTIO links
...
Seems OK with Vivado 2019.2.
2020-05-29 15:59:16 +08:00
d5c1eaa16e
runtime: remove stack alignment requirement
...
I suppose this was for TMPU, but was never finished.
2020-05-29 15:37:23 +08:00
02900d79d0
firmware: fix typos
2020-05-29 15:21:07 +08:00
d8b5bcf019
sayma_amc: support uTCA backplane for DRTIO
2020-05-29 14:58:49 +08:00
8b939b7cb3
sayma_amc: remove Master (obsoleted by Metlino)
2020-05-29 14:40:49 +08:00
Charles Baynham
692c466838
Use logger formatting
2020-05-26 17:59:55 +08:00
Charles Baynham
8858ba8095
dashboard: Restart applets if required
...
Restart applets that are already running if a ccb call updates their spec
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2020-05-26 17:59:55 +08:00
2538840756
Coredevice Input Validation ( #1447 )
...
* Input validation and masking of SI -> mu conversions (close #1446 )
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* Update RELEASE_NOTES
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
Co-authored-by: Robert Jördens <rj@quartiq.de>
2020-05-17 15:09:11 +02:00
b3b6cb8efe
ad53xx improvements ( #1445 )
...
* ad53xx: voltage_to_mu() validation & documentation (closes #1443 , #1444 )
The voltage input (float) is checked for validity. If we need more
speed, we may want to check the DAC-code for over/underflow instead.
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx documentation: voltage_to_mu is only valid for 16-bit DACs
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* AD53xx: add voltage_to_mu method (closes #1341 )
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx: improve voltage_to_mu performance
Interger comparison is faster than floating point math.
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* AD53xx: voltage_to_mu method now uses attribute values
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* Fixup RELEASE_NOTES.rst
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx: documentation improvements
voltage_to_mu return value
14-bit DAC support
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
2020-05-08 19:23:43 +02:00
4e9a529e5a
kasli: integrate WRPLL
2020-05-07 21:34:02 +08:00
60e5f1c18e
kasli: DRTIO support for Kasli 2
2020-05-07 20:09:43 +08:00
1f2182d4c7
kasli: default to hardware v2
2020-05-07 19:15:03 +08:00
35f1814235
kasli: implement virtual LEDs
2020-05-07 19:07:43 +08:00
b83afedf43
kasli: light up ERROR LED on panic
2020-05-07 19:06:10 +08:00
4982fde898
firmware: I2C I/O expander support
2020-05-05 21:38:17 +08:00
ef4e5bc69b
firmware: Kasli I2C EEPROM cleanup
2020-05-05 21:29:29 +08:00
85e92ae28c
compiler: use more LLVM tools on ARM ( #733 )
2020-04-28 16:21:50 +08:00
7e400a78f4
kasli: compile tester for hw 2.0 by default
2020-04-28 16:07:56 +08:00
140a26ad7e
compiler: ld -> ld.lld
2020-04-28 16:07:26 +08:00
4228e0205c
compiler: link with lld on ARM ( #733 )
2020-04-28 15:00:24 +08:00
3a7819704a
rtio: support direct 64-bit now CSR in KernelInitiator
2020-04-26 16:04:32 +08:00
251a0101a6
compiler: support disabling now-pinning
2020-04-26 12:38:43 +08:00
d19f28fa84
kasli: v2 clocking WIP, remove SFP LEDs from RTIO
2020-04-23 23:02:18 +08:00
9bc43b2dbf
kasli: support EEPROM on v2
2020-04-23 23:00:36 +08:00
77e6fdb7a7
artiq_flash: cleanup Sayma RTM management, support flashing AMC with RTM disconnected
2020-04-14 18:22:06 +08:00
ea79ba4622
ttl_serdes: detect edges on short pulses
...
Edges on pulses shorter than the RTIO period were missed because the
reference sample and the last sample of the serdes word are the same.
This change enables detection of edges on pulses as short as the
serdes UI (and shorter as long as the pulse still hits a serdes sample
aperture).
In any RTIO period, only the leading event corresponding to the first
edge with slope according to sensitivity is registerd. If the channel is
sensitive to both rising and falling edges and if the pulse is contained
within an RTIO period, or if it is sensitive only to one edge slope and
there are multiple pulses in an RTIO period, only the leading event is
seen. Thus this possibility of lost events is still there. Only the
conditions under which loss occurs are reduced.
In testing with the kasli-ptb6 variant, this also improves resource
usage (a couple hundred LUT) and timing (0.1 ns WNS).
2020-04-13 13:21:03 +02:00
e8b73876ab
comm_kernel: add Zynq runtime identifier
2020-04-12 17:25:14 +08:00
de57039e6e
comm_kernel: cleanup
2020-04-12 16:02:36 +08:00
9dc24f255e
comm_kernel: remove dead code
2020-04-12 15:06:46 +08:00
fb0ade77a9
firmware: fix non-DRTIO build
2020-04-10 17:23:17 +08:00
ec7b2bea12
sayma: round FTW like Urukul in JDCGSyncDDS
2020-04-08 15:00:33 +08:00
0f4be22274
sayma: add simple sychronized DDS for testing
2020-04-08 14:13:54 +08:00
3c823a483a
sayma: improve DAC sync messaging (again)
2020-04-06 22:36:43 +08:00
4d601c2102
sayma: improve DAC sync messaging
2020-04-06 22:36:03 +08:00
61d4614b61
sayma: fix/cleanup DRTIO-DAC sync interaction
2020-04-06 22:34:05 +08:00
facc0357d8
drtio: make sure receive buffer is drained after ping reply
2020-04-06 22:33:15 +08:00
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
8f608fa2fa
examples/sines_urukul_sayma: adapt for sayma v2, use 1 DAC only
2020-04-05 16:51:40 +08:00
Etienne Wodey
90d08988b2
language/environment: BooleanValue: fix type detection
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2020-04-04 15:37:04 +08:00
Etienne Wodey
9b03a365ed
language/environment: cast argument processor default values early
...
Fixes #1434 . Also add unit tests for some argument processors.
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2020-04-04 15:37:04 +08:00
4a8d361ace
soc: optimize programmable identifier
2020-03-12 23:09:13 +08:00
9e66dd7075
soc: reprogrammable identifier
2020-03-12 22:23:08 +08:00
380de177e7
rtio: fix wide output after RTIO refactoring
...
fixes 3d0c3cc1cf
2020-03-05 17:55:27 +00:00
e803830b3b
fastino: support wide RTIO interface and channel groups
2020-03-05 17:55:04 +00:00
8451e58fbe
ad9912: fix ftw width docstring
2020-02-27 02:11:12 +08:00
Paweł K
2a909839ff
artiq_flash: added option of specifying another username when connecting through SSH. ( #1429 )
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2020-02-19 19:44:11 +08:00
6d26def3ce
sayma: drive filtered_clk_sel on master variant
2020-02-06 22:28:49 +08:00
52ec849008
sayma: fix sysref_delay_dac
2020-02-05 19:04:01 +08:00
c7de1f2e6b
metlino: drive clock muxes
2020-02-05 00:06:34 +08:00
bf9f4e380a
si5324: program I2C mux on Metlino
2020-02-03 18:07:59 +08:00
ffb24e9fff
artiq_flash: use correct proxy bitstream for Metlino
2020-02-03 18:07:26 +08:00
5f8e20b1a1
artiq_sinara_tester: fix device_db filename
2020-01-31 10:26:58 +08:00
dfa033eb87
wrpll: new collector from Weida/Tom
2020-01-24 10:31:52 +08:00
dee16edb78
wrpll: DDMTD sampler double latching
2020-01-22 19:16:26 +08:00
f4d8f77268
turn kasli_tester into a frontend tool
2020-01-21 16:13:04 +08:00
bfcbffcd8d
update smoltcp
...
This disables the 'log' features which does not compile, and may break net_trace. To be investigated later.
2020-01-21 13:58:23 +08:00
82cdb7f933
typo
2020-01-21 10:07:13 +08:00
248230a89e
fastino: style
2020-01-20 13:25:00 +01:00
c45a872cba
fastino: fix init, set_cfg
2020-01-20 13:25:00 +01:00
2c4e5bfee4
fastino: add [WIP]
2020-01-20 13:25:00 +01:00
8f9948a1ff
kasli_sawgmaster: add basemod programming example
2020-01-20 20:14:24 +08:00
e427aaaa66
basemod_att: fix imports
2020-01-20 20:14:24 +08:00
62a52cb086
sayma: do not pollute the log with DAC status on success
2020-01-20 20:14:24 +08:00
6b428ef3be
sayma: initialize DAC before testing jesd::ready
2020-01-20 20:14:24 +08:00
7ab0282234
adf5355: style
2020-01-20 13:13:08 +01:00
9368c26d1c
mirny: add to manual
2020-01-20 13:13:08 +01:00
Etienne Wodey
da531404e8
artiq_ddb_template: add Mirny support
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2020-01-20 13:13:08 +01:00
01a6e77d89
mirny: add
...
* This targets unrelease CPLD gateware (https://github.com/quartiq/mirny/issues/1 )
* includes initial coredevice driver, eem shims, and kasli_generic tooling
* addresses the ARTIQ side of #1130
* Register abstraction to be written
Signed-off-by: Robert Jördens <rj@quartiq.de>
2020-01-20 13:13:08 +01:00
ec03767dcf
sayma: improve DAC status report
2020-01-20 18:22:06 +08:00
5c299de3b4
sayma: print DAC status on JESD not ready error
2020-01-20 18:21:29 +08:00
45efee724e
sayma: add JESD204 PHY done diagnostics
2020-01-20 12:47:31 +08:00
6c3e71a83a
wrpll: cleanup
2020-01-18 09:43:43 +08:00
344f8bd12a
wrpll: collector patch from Weida
2020-01-18 09:42:58 +08:00
833f428391
sayma: fix hmc542 to/from mu
2020-01-16 09:10:32 +08:00
6c948c7726
sayma: RF switch control is active-low on Basemod, invert
2020-01-16 08:59:52 +08:00
50302d57c0
wrpll: more careful I2C timing
2020-01-14 20:03:46 +08:00
105dd60c78
wrpll: ADPLLProgrammer mini test bench and fixes
2020-01-14 16:52:25 +08:00
3242e9ec6c
wrpll: loop test
2020-01-13 22:31:57 +08:00
8ec0f2e717
wrpll: implement ADPLLProgrammer
2020-01-13 22:30:11 +08:00
d5895b8999
wrpll: adpll -> set_adpll
2020-01-13 20:46:36 +08:00
e7ef23d30c
wrpll: use CONFIG_CLOCK_FREQUENCY and rtio_frequency in trim_dcxos
2020-01-13 20:44:15 +08:00
ea3bce6fe3
wrpll: wait for settling time after setting ADPLL
2020-01-13 20:43:34 +08:00
d685619bcd
wrpll: collector code modifications from Weida
2020-01-13 20:42:41 +08:00
9d7196bdb7
update copyright year
2020-01-13 19:33:44 +08:00
e87d864063
wrpll: print ADPLL offsets
2020-01-13 19:32:30 +08:00
8edbc33d0e
wrpll: calculate initial ADPLL offsets
2020-01-13 19:29:10 +08:00
9dd011f4ad
firmware: remove bitrotten Sayma code
2020-01-13 18:47:54 +08:00
583a18dd5f
firmware: expose fmod to kernels. Closes #1417
2020-01-10 14:33:02 +08:00
David Nadlinger
d8c81d6d05
compiler: Other types microoptimisations
...
Interestingly enough, these actually seem to give a measurable
speedup (if small – about 1% improvement out of 6s whole-program
compile-time in one particular test case).
The previous implementation of is_mono() had also interesting
behaviour if `name` wasn't given; it would test only for the
presence of any keys specified via keyword arguments,
disregarding their values. Looking at uses across the current
ARTIQ codebase, I could neither find a case where this would
have actually been triggered, nor any rationale for it.
With the short-circuited implementation from this commit,
is_mono() now checks name/all of params against any specified
conditions.
2020-01-01 08:49:19 +00:00
David Nadlinger
2c34f0214b
compiler: Short-circuit Type.unify() with identical other type
...
This considerably improves performance; ~15% in terms of total
artiq_run-to-kernel-compiled duration in one test case.
2020-01-01 08:49:19 +00:00
eebae01503
artiq_client: add back quiet-verbose args for submission
...
close #1416
regression introduced in 3fd6962
2019-12-31 13:00:26 +01:00
3f32d78c0e
wrpll: simple ADPLL test
2019-12-31 12:12:29 +08:00
bb04b082a7
wrpll: clarify comment
2019-12-31 12:12:29 +08:00
David Nadlinger
1e864b7e2d
coredevice/suservo: Add separate methods for setting only the IIR offset
2019-12-30 20:02:22 +00:00
a666766f38
wrpll: add ADPLL offset registers
2019-12-30 22:19:42 +08:00
5c6e394928
ddmtd: add collector
2019-12-30 22:17:44 +08:00
642a305c6a
wrpll: remove unnecessary delay
...
Counting now happens in the sys domain with no CDC between counter and CPU.
2019-12-30 20:01:06 +08:00
f57f235dca
wrpll: new frequency meter
...
As per Mattermost discussion with Tom.
2019-12-30 19:47:57 +08:00
9e15ff7e6a
wrpll: improve DDMTD deglitcher
2019-12-30 16:56:06 +08:00
dfad27125e
runtime: relax/fix TCP keepalive settings ( #1125 )
2019-12-23 19:58:10 +08:00
b5e1bd3fa2
coredevice: simplify/cleanup network connection code
...
This removes:
* host-side keepalive, which turns out not to be required
* custom connection timeout (the default is OK)
* SSH tunneling support (doesn't seem to be actually used anywhere)
2019-12-23 19:53:49 +08:00
David Nadlinger
af31c6ea21
coredevice: Don't use is to compare with integer literal
...
This works on CPython, but is not guaranteed to do so, and
produces a warning since 3.8 (see https://bugs.python.org/issue34850 ).
2019-12-22 05:46:41 +00:00
fb2076a026
basemod_att: add dB functions, document
2019-12-21 14:56:41 +08:00
b2480f0edc
artiq_flash: update actions documentation
2019-12-21 14:18:28 +08:00
d4e039cede
basemod: add coredevice driver
2019-12-21 14:18:10 +08:00
106d25b32a
kasli_sawgmaster: fix drtio_is_up
2019-12-21 14:17:52 +08:00
8759c8d360
shiftreg: fix get method
2019-12-21 14:17:22 +08:00
c3030f4ffb
kasli_sawgmaster: update device_db for BaseMod
2019-12-20 19:59:15 +08:00
cab8c8249e
coredevice/shiftreg: add get method
2019-12-20 18:58:50 +08:00
b7f1623197
sayma_rtm: connect attenuator shift registers in series
2019-12-20 18:58:31 +08:00
c5137eeb62
firmware: remove legacy hmc542 code
2019-12-20 15:25:55 +08:00
1c9cbe6285
sayma_rtm: add basemod attenuators on RTIO
2019-12-20 15:25:55 +08:00
David Nadlinger
8f518c6b05
compiler: Allow None in type hints
...
Similar to how Python itself interprets None as type(None),
make it translate to TNone in ARTIQ compiler type hints.
2019-12-19 09:36:45 +08:00
David Nadlinger
594ff45750
compiler: Revert support for None as TNone
...
This was mistakenly included in fb2b634c4a
2019-12-18 13:23:40 +00:00
David Nadlinger
fb2b634c4a
compiler, language: Implement @kernel_from_string
...
With support for polymorphism (or type erasure on pointers to
member functions) being absent in the ARTIQ compiler, code
generation is vital to be able to implement abstractions that
work with user-provided lists/trees of objects with uniform
interfaces (e.g. a common base class, or duck typing), but
different concrete types.
@kernel_from_string has been in production use for exactly
this use case in Oxford for the better part of a year now
(various places in ndscan).
GitHub: Fixes #1089 .
2019-12-18 10:51:04 +08:00
6ee15fbcae
sayma_rtm: basemod RF switches
2019-12-18 10:33:29 +08:00
David Nadlinger
d3508b014f
firmware: Add whitespace between panic handler location and message
2019-12-17 19:59:59 +00:00
David Nadlinger
0279a60a55
examples: Add README
...
This will be displayed by GitHub below the directory listing, and was
inspired by observing new users disregard the examples/ tree entirely
(even though the experiments and device DBs within would have cleared
up their getting-started confusion) due to the perceived complexity
wall induced by the wealth of subdirectories.
2019-12-17 13:35:19 +00:00
8d13aeb96c
test: run test_help for browser and dashboard
2019-12-12 10:34:58 +08:00
ac09f3a5da
artiq_browser: fix command line argument handling. Closes #1404
2019-12-11 16:18:56 +08:00
52112d54f9
kasli_generic: expose peripheral_processors dictionary. Closes #1403
2019-12-10 10:30:06 +08:00
6f52540569
wrpll: fix previous commit
2019-12-09 20:13:55 +08:00
13486f3acf
wrpll: swap helper/main si549 frequencies
2019-12-09 19:49:34 +08:00
150a02117c
sayma_rtm: drive clk_src_ext_sel
2019-12-09 19:47:50 +08:00
307a6ca140
gth_ultrascale: make OBUFDS_GTE3 work
...
https://www.xilinx.com/support/answers/67919.html
2019-12-09 18:13:22 +08:00
4919fb8765
wrpll: print DDMTD helper tags
2019-12-09 17:39:22 +08:00
0d4eccc1a5
wrpll: improve debug output
2019-12-09 17:23:09 +08:00
f633c62e8d
wrpll: speed up si549 i2c access
2019-12-09 17:22:58 +08:00
14e09582b6
wrpll: work around si549 not working when lsdiv=2
2019-12-09 16:20:08 +08:00
439576f59d
wrpll: fix Si549 initialization delays
2019-12-09 16:13:57 +08:00
2b5213b013
wrpll: constrain clocks
2019-12-09 12:26:44 +08:00
05e2e1899a
wrpll: update OBUFDS_GTE2 comment
...
Seems O can fan out simultaneously to transceiver and fabric.
Kasli is using ODIV2 for no particular reason.
2019-12-09 11:58:54 +08:00
4148efd2ee
wrpll: implement filters and connect to Si549
2019-12-09 11:47:29 +08:00
d43fe644f0
wrpll: stabilize DDMTDSamplerGTP
2019-12-09 11:47:14 +08:00
0499f83580
wrpll: helper clock sanity check
2019-12-08 23:46:33 +08:00
46a776d06e
sayma: introduce WRPLL on RTM
2019-12-08 15:30:00 +08:00
f35f658bc5
artiq_flash: rework RTM management
2019-12-08 15:29:31 +08:00
bcd061f141
artiq_flash: RTM is a regular DRTIO satellite, can be used with all variants
2019-12-08 15:12:04 +08:00
883310d83e
sayma_rtm: si5324 -> cdrclkc
2019-12-08 14:26:05 +08:00
57a5bea43a
sayma_rtm: support setting RTIO frequency
2019-12-08 11:45:31 +08:00
da9237de53
wrpll: support differential DDMTD inputs
2019-12-07 18:18:57 +08:00
Paweł Kulik
3851a02a3a
Added option of flashing only RTM gateware.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:31:19 +08:00
Paweł Kulik
14e250c78f
Enabled internal pullup for CML SYSREF outputs, otherwise there is no signal on them.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:30:24 +08:00
7098854b0f
wrpll: share DDMTD counter
2019-12-04 19:05:56 +08:00
05c5fed07d
suservo: stray comma
2019-12-03 08:38:07 +00:00
56074cfffa
suservo: support operating with one urukul
...
implemented by wiring up the second Urukul to dummy pins
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-12-02 11:30:20 +01:00
86e1924493
kasli_generic: support external reference on masters
2019-11-30 07:34:41 +00:00
eb271f383b
wrpll: add DDMTD cores
2019-11-28 22:03:50 +08:00
39d5ca11f4
si549: increase I2C frequency
2019-11-28 22:03:26 +08:00
87894102e5
si549: use recommended i2c read sequence
2019-11-28 17:49:02 +08:00
2e55e39ac7
wrpll: use spaces to indent
2019-11-28 17:40:25 +08:00
354d82cfe3
wrpll: drive helper clock domain
2019-11-28 17:40:00 +08:00
4a03ca928d
artiq_flash: sayma fixes
2019-11-28 17:38:29 +08:00
68cab5be8c
si549: cleanups
2019-11-28 16:36:59 +08:00
bcd2383c9d
wrpll: si549 initialization
2019-11-27 22:58:08 +08:00
4832bfb08c
wrpll: i2c functions, select_recovered_clock placeholder
2019-11-27 21:21:00 +08:00
449d2c4f08
libboard_misoc: fix !has_i2c
2019-11-27 21:04:28 +08:00
e0687b77f5
si5324: 10 MHz ext_ref_frequency
...
* close #1254
* tested on innsbruck2 kasli variant
* sponsored by Uni Innsbruck/AQT
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-11-22 18:29:12 +01:00
c536f6c4df
sayma_amc: output ddmtd_rec_clk
2019-11-20 19:16:04 +08:00
ae50da09c4
drtio/gth_ultrascale: support OBUFDS_GTE3
2019-11-20 19:15:50 +08:00
fe0c324b38
sayma: integrate si549 core
2019-11-20 17:37:16 +08:00
fa41c946ea
wrpll: si549 fixes
2019-11-20 17:04:24 +08:00
c5dbab1929
gateware: move wrpll to drtio
2019-11-20 14:43:08 +08:00
gthickman
56d4b70e01
ad9910 osk ( #1387 )
...
* updated adoo10.py for RAM mode frequency control
* updated docstrings for set_cfr1() in ad9910.py
* fixed typo in ad9910.py
* added docstrings to ad9910.py
* removed OSK-related changes in AD9910, to be included in a separate branch.
* updated AD9910 set_cfr1 for control of OSK mode parameters
* updated AD9910 set_cfr1() for control of OSK mode parameters.
2019-11-18 15:57:26 +01:00
Fabian Schmid
f73e2a3d30
doc: clarify urukul attenuator behavior
...
Closes #1386
Signed-off-by: Fabian Schmid <fabian.schmid@mpq.mpg.de>
2019-11-18 15:56:00 +01:00
3adc799785
update GUI background
2019-11-15 13:49:09 +08:00
db13747279
fix device_db alias corner case bugs. Closes #1140
2019-11-14 16:22:45 +08:00
4707aef45c
split out artiq-comtools
2019-11-14 15:21:51 +08:00
4416378d21
frontend: add --version to common tools
2019-11-14 11:42:31 +08:00
Garrett
f8a7e278b8
removed OSK-related changes in AD9910, to be included in a separate branch.
2019-11-12 19:07:05 +01:00
Garrett
3a19ba7e62
added docstrings to ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
4ad3651022
fixed typo in ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
6d34eb3bb0
updated docstrings for set_cfr1() in ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
61ca46ec3f
updated adoo10.py for RAM mode frequency control
2019-11-12 19:07:05 +01:00
fd7081830c
remove fire_and_forget (moved to sipyco)
2019-11-12 19:43:04 +08:00
3fd6962bd2
use sipyco ( #585 )
2019-11-10 15:55:17 +08:00
6644903843
bootloader: fix imports
2019-11-06 14:45:55 +08:00
5279bc275a
urukul: rework EEPROM synchronization. Closes #1372
2019-11-05 18:56:10 +08:00
David Nadlinger
bc3b55b1a8
gateware/eem: Force IOB=TRUE on Urukul SYNC output
...
Without this, the final register in the SYNC signal TTLClockGen
isn't (always) placed in the I/O tile, leading to more jitter
than necessary, and causing "double window" artefacts. See
sinara-hw/Urukul#16 for more details.
(Patch based on work by Weida Zhang, testing by various members
of the community in Oxford and elsewhere.)
2019-11-05 17:14:07 +08:00
b25a17fa37
netboot: support slave FPGA loading
2019-11-05 16:28:49 +08:00
307f39e900
remoting: fix multiuser access. Closes #1383
2019-11-05 15:46:07 +08:00
9dc82bd766
bootloader: add no_flash_boot config option to force network boot
2019-11-05 15:31:08 +08:00
e2f9f59472
artiq_flash: fix flashing Sayma RTM from package
2019-11-05 15:19:01 +08:00
98854473dd
sayma_amc: use all transceivers on master ( #1230 )
2019-11-02 12:12:32 +08:00
29b4d87943
firmware: add cargosha256.nix
2019-11-01 10:28:41 +08:00
5362f92b39
bootloader: disable minimum stack space check in linker script
...
* The value varies greatly whether netboot is enabled or not.
* There is no simple solution to detect has_ethmac in the linker script and set the value accordingly.
* The space check is an imperfect solution that will be superseded by stack pointer limits.
* Left commented out so we can re-enable it manually during development if stack corruption is suspected.
2019-11-01 10:25:14 +08:00
deadfead2a
bootloader: fix !has_ethmac
2019-11-01 10:19:08 +08:00
42af76326f
kasli: enlarge integrated CPU SRAM for DRTIO masters
...
Required by the bootloader netboot support.
2019-11-01 10:15:13 +08:00
a78e493b72
firmware: load slave FPGA in bootloader
2019-10-31 12:42:40 +08:00
389a8f587a
slave_fpga: modularize
2019-10-31 11:50:53 +08:00
9a35a2ed81
test_frontends: update
2019-10-30 22:02:16 +08:00
bc050fdeec
bootloader: treat zero-length firmware in flash as no firmware
2019-10-30 21:46:06 +08:00
228e44a059
sayma: enable Ethernet on DRTIO satellite variant
...
So that netboot can be used in bootloader.
2019-10-30 21:39:00 +08:00
dc71039934
sayma, metlino: increase integrated_sram_size on Ethernet-enabled variants
2019-10-30 21:36:00 +08:00
3042476230
artiq_netboot: remove unnecessary import
2019-10-30 21:29:33 +08:00
c96de7454d
remove artiq_devtool
2019-10-30 21:27:24 +08:00
88dbff46f4
add netboot tool
2019-10-30 21:24:51 +08:00
462cf5967e
bootloader: add netboot support
2019-10-30 21:23:42 +08:00
1f15e55021
comm_analyzer: don't assume every message has data
...
close #1377
2019-10-28 15:35:44 +01:00
David Nadlinger
611bcc4db4
compiler: Cache expensive target data layout queries
...
On one typical experiment, this shaves about 3 seconds (~25%)
off the overall kernel compilation time.
GitHub: Closes #1370 .
2019-10-28 11:09:25 +00:00
David Nadlinger
5d7f22ffa4
compiler: Remove provision for unused four-parameter llptr_to_var() form [nfc]
...
`var_type` was presumably intended to convert to a target type,
but wasn't actually acted on in the function body (nor was it
used anywhere in the codebase).
2019-10-28 11:02:46 +00:00
f2f7170d20
hmc7043: use recommend I/O standards
...
https://github.com/sinara-hw/Sayma_RTM/issues/116#issuecomment-544187952
2019-10-21 22:56:10 +08:00
47a83c71f1
firmware: more readable network addresses message
2019-10-21 14:00:14 +08:00
818d6b2f5a
bootloader: fix compilation problems
2019-10-21 13:28:17 +08:00
8f76a3218e
firmware: move i2c to libboard_misoc, enable IPv6 in bootloader, share network settings
2019-10-21 12:58:52 +08:00
1c5e749036
satman: remove compilation warning without JESD DACs
2019-10-21 12:53:54 +08:00
d26d80410e
runtime: refactor network settings
2019-10-19 17:56:35 +08:00
6d5dcb4211
runtime: enable IPv6. Closes #349
2019-10-19 17:20:33 +08:00
05e8f24c24
sayma2: JESD204 synchronization
2019-10-18 23:28:47 +08:00
62b49882b9
examples/kc705: fix dds_test
2019-10-17 07:37:00 +08:00
a8f85860c4
coreanalyzer: AD9914 fixes ( #1376 )
2019-10-17 07:29:33 +08:00
d42ff81144
examples/sayma_master: update device_db
2019-10-16 18:49:25 +08:00
8fa3c6460e
sayma_amc: set direction of external TTL buffer according to RTIO PHY OE
2019-10-16 18:48:50 +08:00
37d0a5dc19
rtio/ttl: expose OE
2019-10-16 18:48:20 +08:00
bc060b7f01
style
2019-10-16 18:18:11 +08:00
40d64fc782
sayma: remove standalone examples (no longer supported)
2019-10-16 17:54:39 +08:00
21a1c6de3f
sayma: use SFP0 for DRTIO master
2019-10-16 17:53:40 +08:00
6cf06fba7b
examples: use default IP addresses for boards
2019-10-16 16:18:30 +08:00
314d9b5d06
kasli: default to 125MHz frequency for DRTIO
...
This is the consistent and most common option. Sayma will also eventually move to it.
2019-10-08 12:59:52 +08:00
4df2c5d1fb
sayma: prepare for SYSREF align
...
We will try DDMTD on the AMC first, as this is simpler and perhaps will work on v2 after the power supply fixes.
2019-10-08 12:30:47 +08:00
5ee81dc643
satman: define constants for JdacBasicRequest reqnos
2019-10-08 10:27:04 +08:00
4b3baf4825
firmware: run PRBS and STPL JESD204 tests
2019-10-08 00:10:36 +08:00
03007b896e
sayma_amc: sma -> mcx
2019-10-07 20:31:35 +08:00
ebd5d890f1
satman: check for JESD ready
2019-10-06 23:10:57 +08:00
90e3b83e80
hmc7043: turn on AMC_FPGA_SYSREF1
...
Florent's JESD core won't work at all without.
2019-10-06 22:49:00 +08:00
97a0dee3e8
jesd204: remove ibuf_disable
...
We use the MOSFET to mute the HMC7043 noise on hardware v2 instead.
2019-10-06 22:26:31 +08:00
1bc7743e03
sayma: fix hmc7043 output settings for v2 hardware
2019-10-06 21:50:29 +08:00
a421820a32
sayma: initialize DACs over DRTIO
2019-10-06 21:42:45 +08:00
f8e4cc37d0
sayma_rtm: reset and detect DACs
2019-10-06 20:15:27 +08:00
f62dc7e1d4
sayma: refactor JESD DAC channel groups
2019-10-06 20:15:09 +08:00
c4c884b8ce
ad9154: simplify, focus on AD9154 config and do not include JESD
2019-10-06 20:07:02 +08:00
fdba0bfbbc
satman: move now-unrelated hmc830_7043 init away from DRTIO transceiver init
2019-10-06 19:22:46 +08:00
1c6c22fde9
sayma_amc: HMC830_REF moved to RTM side
2019-10-06 18:15:37 +08:00
ad63908aff
hmc830_7043: enable_fpga_ibuf -> unmute
2019-10-06 18:13:59 +08:00
5ad65b9d30
hmc830_7043: remove clock_mux
2019-10-06 18:13:27 +08:00
e6ff44301b
sayma_amc: cleanup (v2.0 only)
2019-10-06 18:11:43 +08:00
e9b81f6e33
remove serwb
...
DRTIO is a better solution
2019-10-06 18:10:23 +08:00
7cd02d30b7
sayma_rtm_drtio: replace sayma_rtm
2019-10-06 17:59:53 +08:00
b3b85135a3
sayma_rtm_drtio: add DDMTD core, move specific cores out of SatelliteBase
2019-10-06 17:59:11 +08:00
346c985347
sayma_rtm_drtio: use artiq_sayma folder
2019-10-06 17:30:08 +08:00
e2a924449d
artiq_flash: use DRTIO RTM gateware
2019-10-06 17:28:14 +08:00
4198033657
sayma_rtm_drtio: cleanup (v2.0 only)
2019-10-06 16:42:34 +08:00
5612b31860
sayma_rtm_drtio: add HMC clock chip and DAC control
2019-10-06 16:15:24 +08:00
a8cf4c2b18
sayma_rtm: hwrev v2.0 by default
2019-10-06 13:25:30 +08:00
1bc5d44a7c
artiq_flash: do not flash RTM gateware on Sayma variants that don't need it
2019-10-06 13:15:50 +08:00
bb5ff46f7d
Merge branch 'wrpll'
2019-10-05 10:24:11 +08:00
7b95814cf5
sayma_amc: refactor, add SimpleSatellite variant
2019-10-05 10:24:06 +08:00
58b7bdcecc
sayma_amc: refactor RTM FPGA code
2019-10-05 10:24:06 +08:00
96fc4a21e8
sayma_amc: remove dummy FPGA pin assignment testing code
2019-10-05 10:24:06 +08:00
Tim Ballance
ada3b39f4e
Fix ad9910 ram mode asf scale error in polar mode
2019-10-04 20:14:41 +02:00
Tim Ballance
448080e71d
Fix ad9910 ram mode asf scale error
...
RAM mode amplitude to ASF conversion should be << 18 rather than << 16
2019-10-04 20:14:41 +02:00
6aa68e1715
sayma_rtm2: select filtered clock from Si5324
2019-10-04 22:56:16 +08:00
6cb0f5de59
sayma_amc: enable DRTIO switching
2019-10-04 22:55:23 +08:00
0cf8a46bbd
sayma_amc2: select filtered clock from Si5324
2019-10-04 21:28:26 +08:00
6f533727cb
artiq_flash: use regular bscan_spi_xcku040 for Sayma
...
The modified version is no longer necessary on v2 boards, and breaks flash bank 1.
2019-10-04 17:50:45 +08:00
4c1fe1de0d
environment: implement HasEnvironment.call_child_method ( #1366 )
2019-09-30 23:58:36 +08:00
Charles Baynham
0b1fb255a9
tools: Wrap Task _do() calls in a generic exception handler
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2019-09-20 23:00:59 +08:00
Charles Baynham
e50a6d5aaf
worker_impy: ignore newline at start of experiment docstring
2019-09-20 22:10:49 +08:00
f0e87d2e59
grabber: remove unused code
2019-09-20 15:26:12 +02:00
4e77be0511
firmware: add Cargo.lock header that newer cargo wants
2019-09-17 15:22:14 +08:00
Charles Baynham
b7abf2fb53
pyon: Handle inf in decoding
2019-09-12 09:46:05 +08:00
38fca01189
artiq_ddb_template: add su-servo support ( #1343 )
2019-09-11 15:52:25 +08:00
991c686d72
kasli_generic,eem: print RTIO channels in hex like artiq_ddb_template
2019-09-11 15:51:53 +08:00
f4dd7e5e29
kasli_tester: init urukul channel before calibrating
...
Otherwise the DDS is not initialized and with a cold system it fails to
find IO_UPDATE edges.
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-09-11 07:16:35 +00:00
7492a59f6d
kasli_generic: add SUServo support ( #1343 )
2019-09-11 11:12:48 +08:00
David Nadlinger
6d6f66338b
runtime: Update core config panic_reset command suggestion message
2019-09-10 19:31:19 +01:00
Charles Baynham
ddd34e5a9c
influx_schedule: log repo_rev along with other info
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2019-09-10 13:46:28 +02:00
98caaebade
consistent use of 'class name' terminology to select a class within an experiment file. Closes #1348
2019-09-09 15:16:33 +08:00
21021beb08
kasli: remove opticlock (moved to kasli_generic)
2019-09-09 15:03:10 +08:00
436662be52
ddb_template: add Novogorny support
2019-09-09 15:00:45 +08:00
69c2acd9d7
ddb_template: sampler cnv is ttl not spi
2019-09-09 14:57:42 +08:00
cfb5ef5548
kasli_generic: add Novogorny support
2019-09-09 14:54:34 +08:00
0b9168994f
Revert "dashboard: Sort TTL moninj channels by name"
...
This reverts commit b3db3ea6fcCloses #1288
2019-09-06 11:17:10 +08:00
Charles Baynham
d31f30a436
influxdb_schedule: fix typo in parameter name
2019-09-05 17:42:56 +02:00
Charles Baynham
7ac8feea19
influxdb_schedule: Handle all exceptions
2019-09-05 17:42:56 +02:00
1fb317778a
eem/grabber: allow third EEM to be specified
2019-08-29 18:58:12 +08:00
90e8e074cd
firmware: turn errors into &str for remote_i2c as well
...
should resolve breakage on a few targets/variants introduced by PR #1351
2019-08-29 09:05:47 +08:00
71b3c66af9
firmware: conditionally compile has_si5324
...
avoids unused warnings where this module is not used.
2019-08-29 09:04:54 +08:00
959679d8b7
wrpll: add I2CMasterMachine
2019-08-27 18:02:05 +08:00
c03c35f375
Revert "compiler: armv7-unknown-linux-gnueabihf -> armv7-linux-gnueabihf"
...
rustc insists on -unknown.
This reverts commit cf47fa44d8
2019-08-26 11:23:00 +08:00
cf47fa44d8
compiler: armv7-unknown-linux-gnueabihf -> armv7-linux-gnueabihf
2019-08-26 11:12:49 +08:00
98cd9a539c
compiler: support Cortex A9 target
2019-08-26 10:46:22 +08:00
afe162ceca
firmware: don't unwrap() but propagate pca9548 errors
2019-08-17 09:15:26 +08:00
a8aabd3815
firwmare: turn i2c errors into &str
2019-08-17 09:15:26 +08:00
8fc5ce902f
firmware: let kasli obtain default hardware_addr from i2c_eeprom
2019-08-17 09:15:26 +08:00
d666f3d573
firmware: factor out mod pca9548 from si5324
...
orepares for further i2c devices.
2019-08-17 09:15:26 +08:00
1fd2322662
wrpll/thls: implement global writeback
2019-08-15 23:16:17 +08:00
24082b687e
wrpll/filters: clean up and make compatible with thls
2019-08-15 17:58:22 +08:00
9331fafab0
wrpll/filters: new code from Weida
2019-08-15 17:24:40 +08:00
5c3974c265
wrpll/thls: fix opcode decoding
2019-08-15 17:12:48 +08:00
19620948bf
wrpll/thls: implement signed numbers
2019-08-15 17:04:17 +08:00
efc43142a6
wrpll/thls: implement min/max
2019-08-15 16:42:59 +08:00
44969b03ad
wrpll/thls: rework instruction decoding
2019-08-15 15:55:13 +08:00
2776c5b16b
wrpll/thls: support mulshift
2019-08-15 15:07:13 +08:00
e9b78b62db
kasli_tester/zotino: always alternate voltage sign
...
Before the voltages on a second Zotino would start 2.1, 1.9, 2.2, 1.8
..., 3.6, 0.4 and overlap with the voltages on the first.
Now the voltages are 2.1, -2.1, 2.2, -2.2, ..., 3.6, -3.6 which allows
quick identification of card/channel and easy prediction when deploying.
2019-08-06 17:38:55 +02:00
f861459ace
wrpll: add filter algorithms (WIP)
2019-08-02 13:23:16 +08:00
David Nadlinger
99e490f9ff
coredevice/suservo: Slightly reword get_adc[_mu]() docstring for clarity
...
This hopefully suggests a bit better that the value is the last one
fetched by the servo (i.e. needs the servo active to update), rather
than somehow requesting a new sample to be taken.
2019-07-30 12:22:08 +01:00
3f0657f2a8
artiq_influxdb_schedule: add schedule logger
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-07-26 14:47:18 +02:00
7a5dcbe60e
wrpll/thls: support processor start/stop
2019-07-24 18:51:33 +08:00
b8870997d0
doc: clarify TTL direction control with buffered cards
2019-07-24 10:04:45 +08:00
623446f82c
wrpll/thls: simple simulation demo
2019-07-20 18:50:57 +08:00
831b3514d3
wrpll/thls: stop at return statement
2019-07-19 16:27:29 +08:00
David Nadlinger
280915d54f
coredevice/suservo: Adjust T_CYCLE to match gateware
...
See GitHub #1338 .
2019-07-17 00:20:22 +01:00
34222b3f38
wrpll: encode thls program
2019-07-09 17:56:14 +08:00
5f461d08cd
wrpll: add simple thls compiler
2019-07-09 16:07:31 +08:00
f7e10759dc
suservo: note requirement to stop servo when accessing state
...
As already mentioned in the gateware.
One alternative would be to detect address collisions and
stall the read for one cycle.
Note that there will in general not be a consistent view of the servo
state unless the servo is stopped.
close #1337
2019-07-08 18:37:42 +02:00
e4fff390a8
si590 -> si549
...
Had mistaken the part numbers.
2019-07-07 09:39:55 +08:00
dceb5ae501
wrpll: Si590 I2C mux, CDC
2019-07-05 23:42:37 +08:00
f8dba7ae35
rtio: use BlindTransfer from Migen
2019-07-05 18:46:18 +08:00
5a9bb0ecba
runtime: fix incorrect 'RTIO clock failed' report
2019-06-24 23:33:13 +08:00
David Nadlinger
8bf9640185
coredevice/suservo: Fix output IIR state width in docstring
2019-06-21 11:27:39 +02:00
David Nadlinger
34f48f57cc
coredevice/suservo: Fix {get,set}_y_mu() scaling
...
Previously, Channel.set_y(1) would set the output to -1 instead.
2019-06-21 11:27:39 +02:00
f6edceb23d
kasli_tester: cleanup/fix test skipping
2019-06-21 16:00:14 +08:00
whitequark
b8b9fa51bd
libdyld: accept objects with no rela relocations.
2019-06-17 06:43:34 +00:00
David Nadlinger
0353966ef7
gateware/suservo: Sign-extend data on RTIO read-back
...
See GitHub #1327 for original patch by Brad Bondurant.
2019-06-14 23:46:16 +01:00
David Nadlinger
720838a23e
gateware/suservo: Avoid magic number for activation delay width
...
Mostly for documentation purposes; 8 bits ought to be enough for
everyone.
2019-06-14 23:45:40 +01:00
53789ba9aa
tester: handle urukul switch differences
2019-06-14 10:54:00 +00:00
6655e567df
ddb_template: urukul fixes
...
* fix/add sw (ad9912 and ad9910)
* allow pll_n to be changed
2019-06-14 10:53:03 +00:00
53c778ae2d
runtime: fix previous commit
2019-06-14 15:53:01 +08:00
a947867887
runtime: support Kasli Si5324 bypass via rtio_clock=e
2019-06-14 15:48:05 +08:00
66a66b03b4
style
2019-06-14 15:29:16 +08:00
87ce24e867
runtime: refactor startup and RTIO clocking initialization
2019-06-14 15:26:30 +08:00
43e58c939c
sayma: drop MasterDAC
...
This seemed like a good idea then, but it introduces complexity, corner cases, and additional testing difficulties.
Now Sayma works fine with Kasli as a master, which is simpler.
2019-06-14 14:06:16 +08:00
b04e15741b
drop SI5324_SAYMA_REF
2019-06-14 14:03:48 +08:00
636b4cae5a
tester: urukul single-eem mode
2019-06-13 12:48:42 +00:00
591de0e579
ddb_template: support urukul single-eem mode
2019-06-13 12:19:12 +00:00
967d192cbe
ddb_template: wrong copy paste comma
2019-06-13 11:30:22 +00:00
8853cf8df9
dashboard: work around disappearing TTL/DDS panel bug. Closes #1307
2019-06-13 18:41:42 +08:00
1a898c423a
aqctl_corelog: filter log messages. Closes #1316
2019-06-13 18:17:52 +08:00
834d03527b
examples/dds_setter: fix RTIO underflow
2019-06-13 18:07:39 +08:00
e3c58d5872
remove outdated kc705 examples
2019-06-13 18:06:26 +08:00
74e4b01201
urukul: document consequences of incorrect CPLD clock settings
2019-06-11 11:12:12 +08:00
adf3df2bb5
suservo coredevice driver: mask ftw to avoid erroneous sign extension
2019-06-03 21:40:04 +02:00
bc2cfd77f5
metlino: add EEMs
2019-05-19 18:16:00 +08:00
cdef50c0dd
sayma_amc: Urukul v1.3
2019-05-19 16:54:38 +08:00
34c61db790
artiq_flash: fix Metlino support
2019-05-19 16:37:40 +08:00
88b6496c8c
artiq_flash: add Metlino support
2019-05-19 16:30:10 +08:00
9dcaae6395
metlino: use variant output directory
2019-05-19 16:24:51 +08:00
b4779969d0
metlino: work around vivado bug ( #1230 )
2019-05-19 11:27:27 +08:00
874542f33f
add Metlino support
2019-05-19 10:57:43 +08:00
hartytp
cfe1f56f73
suservo: add some more comments to the RTServoMem to clarify the RTIO interface ( #1323 )
2019-05-17 16:12:35 +01:00
David Nadlinger
84b91ee8bd
master/scheduler: Document Deleter semantics [nfc]
...
From looking at the code, it wasn't obvious to me that this is
supposed to handle multiple calls to delete(). This is the case,
however, when for instance Scheduler.delete()ing a run, which
will then also be deleted again from AnalyzeStage.
2019-05-14 22:37:16 +01:00
hartytp
c2b4f0cfe3
sync_struct: catch ConnectionErrors in _receive_cr ( #1319 )
2019-05-10 12:53:51 +01:00
hartytp
bbcd1db025
sync_struct: replace ConnectionError subclasses with ConnectionError ( #1318 )
2019-05-10 12:48:12 +01:00
hartytp
30fe624fe5
sync_struct: flake8 [nfc] ( #1317 )
2019-05-10 12:42:06 +01:00
1a3d71760d
consolidate kasli example folders
2019-05-10 12:17:38 +08:00
f551491a84
remove sayma_masterdac example
2019-05-10 12:13:07 +08:00
72f7f8386f
remove old Kasli device databases ( #1289 )
2019-05-10 12:11:42 +08:00
86f462f40e
artiq_ddb_template: add edge counter support
2019-05-09 17:20:13 +08:00
fda3cb2482
kasli_generic: add edge counter support
2019-05-09 17:19:11 +08:00
ead9a42842
kasli: remove VLBAIMaster, VLBAISatellite variants
2019-05-08 15:58:25 +00:00
0c9b810501
kasli: remove PTB/PTB2/LUH/HUB variants
...
see sinara-systems and nix-scripts repos
2019-05-08 15:51:18 +00:00
1d2cc60e0d
kasli_generic: support ext_ref
2019-05-08 15:51:18 +00:00
948ea396c0
remove old buildbot kc705 device-db
2019-05-07 17:28:06 +08:00
3209197b0b
artiq_flash: do not needlessly look for artifacts
2019-05-07 17:20:13 +08:00
a1c97ec4dd
kasli_tester: support selection of TTL output to use as stimulus
2019-05-07 16:58:00 +08:00
4cc9bd33ce
test: only test_rpc_timing actually requires ARTIQ_LOW_LATENCY
2019-04-24 11:22:07 +08:00
bb39eedf5b
fix previous commit
2019-04-20 10:44:07 +08:00
93f4f31f45
devices.ctlmgr -> master.ctlmgr
2019-04-20 00:25:44 +08:00
56033b60a7
move thorlabs_tcube out of tree ( #887 )
2019-04-20 00:09:58 +08:00
eaec519ac8
move lda out of tree ( #887 )
2019-04-19 23:43:14 +08:00
d4781e9a8a
aqctl_corelog: add simulation mode
2019-04-19 23:42:37 +08:00
62e9b2d85e
move novatech409b out of tree ( #887 )
2019-04-19 21:56:16 +08:00
4c1fb0c2a1
move korad_ka3005p out of tree ( #887 )
2019-04-19 19:47:41 +08:00
73d6078883
use IP instead of hostname for kc705-1
...
Makes it easier to run tests in the Windows VM
2019-04-18 22:59:32 +08:00
David Nadlinger
4d215cf541
firmware: Add Si5324 config for 125 MHz ext ref
...
PLL divider settings as suggested by DSPLLsim 5.1.
2019-04-15 22:22:19 +01:00
David Nadlinger
dc7a642b26
test/lit: Make abs() integration test slightly more interesting
...
I had accidentally not included this local diff in the PR that was
merged as commit cdaf554736
2019-04-14 04:12:40 +01:00
David Nadlinger
cdaf554736
compiler: Implement abs() for scalars
...
GitHub: Fixes #1303 .
2019-04-13 13:39:16 +08:00
97b7ed557b
sayma_amc: do not use SFP0 (now used for Ethernet)
2019-04-12 18:47:18 +08:00
David Nadlinger
cd7a5a3683
firmware: Fix kernel RPC handling of zero-size values (e.g. empty arrays)
2019-03-31 18:33:44 +01:00
David Nadlinger
b4ddf4c86b
firmware: Make "unexpected reply from kernel CPU" log messages unique
...
This makes it easier to localize issues based on the log output.
2019-03-31 18:31:56 +01:00
David Nadlinger
236b30ac5f
coredevice: Add test for recent kernel RPC fixes
...
This covers all three (de)serialisation fixes.
2019-03-31 18:25:56 +01:00
David Nadlinger
88fd5c8440
compiler: Fix crash in escape analysis for assigning string literals
2019-03-31 17:10:27 +01:00
David Nadlinger
990e0b7dd9
compiler: Fix comparison of tuples of lists
2019-03-31 17:10:27 +01:00
David Nadlinger
baf102dbb2
compiler: Fix comparison of nested lists
2019-03-31 17:10:27 +01:00
David Nadlinger
8e225433a5
firmware: Fix kernel RPC strings size (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
b8ff627be9
firmware: Fix kernel RPC tuple size calculation (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
fc95183e04
coredevice: Fix host-side serialization of (nested) lists
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
f9af058b96
compiler: Quote tuples as TTuple values
...
Previously, they would end up being TInstances,
rendering them useless.
2019-03-31 23:40:21 +08:00
3634cfac86
typo
2019-03-31 22:27:07 +08:00
4580f3dac8
test/lit: support overriding libartiq_support.so
2019-03-31 22:26:09 +08:00
4499ef1748
kasli: only add moninj core if there are probes to monitor
2019-03-24 14:09:52 +08:00
5d31cf2268
sayma_rtm2: si5324_clkout -> cdr_clk_clean
2019-03-23 13:48:36 +08:00
560849e693
sayma_amc: add DRTIO transceiver on rtm_amc_link for v2 hardware
2019-03-23 13:41:22 +08:00
bbb8c00518
sayma_amc: default to satellite variant
2019-03-23 13:37:55 +08:00
18fbe0b081
sayma_rtm_drtio: support v2 hardware
2019-03-23 13:31:28 +08:00
c7205ad82f
sayma_rtm: preliminary v2 support
2019-03-23 12:37:03 +08:00
d07c6fcfea
ad9910: handle unprogrammed EEPROM and numpy corner cases
2019-03-22 14:28:47 +08:00
7cdcaf0d00
tests: fix coredevice tests after implementing scheduler defaults
2019-03-22 07:27:55 +08:00
33b28f6e56
sayma_amc: add placeholder code to use DDMTD signals on v2 hardware
2019-03-21 17:37:22 +08:00
2ec5a58c59
sayma_amc: si5324_clkout -> cdr_clk_clean
2019-03-21 14:09:33 +08:00
af785b9a9c
artiq_compile: fix after adding scheduler defaults
...
Closes #1290
2019-03-21 09:56:19 +08:00
8d2c1be44f
artiq_flash: ignore rtm_gateware on Sayma for variant autodetection
2019-03-17 15:57:50 +08:00
c2622297bd
urukul: use board_data instead of user_data to store calibration in EEPROM
2019-03-15 17:57:35 +08:00
a01425bc9c
kasli_tester: do not attempt to synchronize AD9912 Urukul
2019-03-15 17:13:29 +08:00
fcf8828cb6
fix tests, artiq_run after implementing scheduler defaults ( #1290 )
2019-03-13 17:20:30 +01:00
5e7c83c9cf
artiq_ddb_template: enable Urukul synchronization from EEPROM
2019-03-13 15:42:51 +08:00
e504262b67
kasli_tester: calibrate Urukul synchronization and write to EEPROM
2019-03-13 15:36:05 +08:00
346299e7f8
kasli_tester: enable EEPROM for Urukul synchronization
2019-03-13 15:35:23 +08:00
04e0c23e78
ad9910: support reading synchronization values from EEPROM
2019-03-13 15:34:47 +08:00
852048dce4
artiq_ddb_template: create Urukul EEPROM device
2019-03-13 15:34:23 +08:00
964a349a19
add Kasli I2C driver
2019-03-13 15:33:50 +08:00
c56c3e5588
dashboard: add support for experiment pipeline/priority/flush defaults
2019-03-12 10:54:15 +01:00
8659c769cb
master/language: add methods to set experiment pipeline/priority/flush defaults
2019-03-12 10:54:15 +01:00
b2177eff81
kasli_tester: run test_i2c_switch
2019-03-11 21:06:28 +08:00
227c729f56
fix permissions
2019-03-11 20:43:28 +08:00
David Nadlinger
b3db3ea6fc
dashboard: Sort TTL moninj channels by name
...
With growing system complexity, the moninj channel index is
no longer a very intuitive ordering for typical end users.
2019-03-11 03:30:14 +01:00
David Nadlinger
5fd92a6175
gui: Fix crash when quickly opening/closing applets
...
Quickly closing/reopening applets (e.g. quickly clicking the checkbox
on an entire folder of applets) would previously lead to an occasional
KeyError on the self.dock_to_item access in on_dock_closed, as close()
would be invoked more than once.
The geometry/checked state handling can potentially be cleaned up
further, but at least this avoid the crash.
2019-03-10 20:57:10 +00:00
e47ba4b35e
kasli_generic: fix identifier string
2019-03-08 19:57:20 +08:00
b219f8b5c7
artiq_flash: autodetect variant
2019-03-08 19:47:24 +08:00
fc9d4c7bdc
artiq_flash: fix sayma master detection
2019-03-08 19:36:35 +08:00
25bcebd1f6
artiq_flash: not all boards are development boards
2019-03-08 19:35:20 +08:00
ed2d8dfa7a
artiq_flash: resolve openocd symbolic links
...
On NixOS, openocd may be a symlink in /run/current-system/sw/bin when installed system-wide.
2019-03-08 12:43:06 +08:00
0d05d4b813
artiq_client: python 3.7 compatibility
2019-02-26 17:09:38 +08:00
ec966de007
thorlabs_tcube: cleanup
2019-02-26 16:50:19 +08:00
62c7f75a9e
sayma_amc: support hardware revisions
2019-02-25 23:49:45 +08:00
d45249197c
siphaser: improve ultrascale clock routing
2019-02-25 23:00:01 +08:00
de3992bbdd
kasli: remove HUST variants (supported by kasli_generic)
2019-02-23 15:44:17 +08:00
791f830ef6
kasli_generic: support DRTIO
2019-02-23 15:41:05 +08:00
d39338d59f
artiq_ddb_template: fix --satellite
2019-02-23 15:27:18 +08:00
d79a6ee41c
artiq_ddb_template: fix pll_vco indentation
2019-02-22 23:50:30 +08:00
62985fbd29
binaries -> board-support
2019-02-22 23:18:01 +08:00
1c35c051a5
kasli: remove variants supported by generic builder
2019-02-22 23:08:49 +08:00
05b128469f
artiq_ddb_template: support setting Urukul pll_vco
2019-02-22 22:59:20 +08:00
cd60803f21
device_ddb_template: add Sampler, Zotino, Grabber and SFP LED support
2019-02-22 20:07:15 +08:00
269f0a4d6f
artiq_ddb_template: add Urukul support
2019-02-22 19:33:27 +08:00
8049c52d06
frontend: add artiq_ddb_template (WIP, TTL only)
2019-02-22 17:19:48 +08:00
8edc2318ab
style
2019-02-22 17:19:20 +08:00
aee8965897
ad9910: add ram conversion tooling and unittests
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 15:59:52 +00:00
ec6588174b
ad9910: add ram operation unittests
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 15:14:32 +00:00
b57cad77ad
ad9910: make ram read work for short segments
...
also cleanup and style
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 14:47:58 +00:00
596d3e20d7
dashboard,browser: do not call get_user_config_dir() in argparse
...
This caused two problems when building the docs:
* the path printed in the docs depends on the machine where they are built
* it pollutes ~/.config, and also breaks Nix builds
2019-02-19 15:43:04 +08:00
40a0cf806d
support overriding versioneer
2019-02-17 14:49:52 +08:00
6ad2e13515
kasli: add generic builder (WIP)
2019-02-12 19:18:09 +08:00
2104a93f78
build_soc: allow overriding SoC class name
2019-02-12 18:33:52 +08:00
ff4e4f15ed
kasli: expose base SoC classes
2019-02-12 18:33:27 +08:00
whitequark
0a84dd38c1
Add missing test from d6eb2b02.
2019-02-10 07:25:53 +00:00
David Nadlinger
01c3000ef3
master: Print offending key on HDF5 dataset type error
...
This helps debugging the cause of TypeErrors arising from types
not handled by the HDF5 serializer, as the backtrace doesn't
otherwise include any useful information.
2019-02-09 20:50:38 +00:00
David Nadlinger
56b2e0c262
artiq_influxdb: Support append() in dataset _Mock
...
This went undetected as append mods were not actually in use
in any part of the codebase previously.
2019-02-09 20:50:38 +00:00
David Nadlinger
bf84226c7d
language: Support appending to datasets
2019-02-09 20:50:38 +00:00
David Nadlinger
820326960e
test: Add basic experiment dataset interface tests
2019-02-09 20:50:38 +00:00
2de1eaa521
dashboard: reconnect to core moninj
...
* handle disconnects like core device address changes and do a
disconnect/connect iteration
* after connection failure wait 10 seconds and try again
* this addresses the slight regression from release-2
to release-3 where the moninj protocol was made stateful
(#838 and #1125 )
* it would be much better to fix smoltcp/runtime to no loose the
connection under pressure (#1125 )
* the crashes reported in #838 look more like a race condition
* master disconnects still require dashboard restarts
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-08 23:52:16 +08:00
1cfd26dc2e
kasli: add UNSW variant
2019-02-08 17:51:51 +08:00
3e8fe3f29d
suservo: fix permissions
2019-02-08 14:54:02 +08:00
David Nadlinger
ef934ad958
Add test/release notes for command-less controllers
...
See eaa1b44b00
2019-02-07 21:51:15 +00:00
eaa1b44b00
ctlmgr: ignore controllers without a "command" field
...
Allow controllers to be specified without a "command" field. The user takes
responsibility for ensuring the controller is running: the controller manager
does not attempt to ping the controller. This is useful when one has a common
controller shared between several masters.
2019-02-07 21:50:29 +00:00
hartytp
0ebff04ad7
SUServo: apply bit masks to servo memory writes to prevent overflows
...
Signed-off-by: TPH <thomas.harty@physics.ox.ac.uk>
2019-02-07 17:04:11 +01:00
hartytp
f6142816b8
Revert "SUServo: remove references to non-existent a0 parameter" ( #1270 )
...
This reverts commit f3aab2b891
2019-02-07 15:57:43 +00:00
hartytp
fe63c9b366
SUServo: remove references to non-existent a0 parameter ( #1268 )
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 15:29:32 +00:00
hartytp
df6c1fca2c
SUServo: flake8 [NFC] ( #1267 )
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 15:13:44 +00:00
hartytp
87e85bcc14
suservo: fix coefficient data writing
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 14:47:11 +01:00
whitequark
d6eb2b023a
compiler: monomorphize casts first, but more carefully.
...
This reverts 425cd7851Fixes #1252 .
2019-02-07 06:24:32 +00:00
b56c7cec1e
kasli: use 100MHz RTIO and 800MHz Urukul frequencies on Berkeley target
...
Urukul sync is not reliable at 125/1000
2019-02-05 11:24:45 +08:00
5a7460a38e
kasli: add sync delays to device_db_berkeley
2019-02-01 22:14:03 +08:00
ea431b6982
sayma_rtm: use 150MHz RTIO freq for DDMTD
2019-01-31 20:43:44 +08:00
ec230d6560
sayma: move SYSREF DDMTD to the RTM
...
Put RTM Si5324 into bypass mode before running.
Needs rework to cut RTM Si5324 reset trace.
Needs rework to fix LVDS termination on RTM R310/R313 and R314/R315.
Needs uFL jumper cables between RTM "REF LO DIAG" and "CRD AUX CLKIN" (sic).
2019-01-31 20:39:33 +08:00
8119000982
sayma_rtm_drtio: use Si5324 soft reset
...
Needs easy board rework to cut trace at pin 1 of Si5324.
The Si5324 contains an internal pull-up on that pin.
Allows using Si5324 + HMC7043 chips at the same time.
Allows the Si5324 bypass hack for DDMTD experiments on the RTM.
2019-01-31 19:43:54 +08:00
82106dcd95
si5324: add bypass function
2019-01-31 19:38:55 +08:00
8bbd4207d8
si5324: use consistent bitmask
2019-01-31 19:35:56 +08:00
d3c608aaec
jesd204sync: reset and check lock status of DDMTD helper PLL in firmware
2019-01-31 15:11:16 +08:00
fa3b40141d
hmc830_7043: document sayma clock muxes
2019-01-31 15:10:11 +08:00
ec8560911f
siphaser: bugfixes
...
* Fix integer overflow in degree computation
* Add some phase slips after the first transition to get out of the jitter zone and avoid intermittent short windows
2019-01-30 16:56:38 +08:00
c591009220
sayma: report TSC phase of SYSREF (TSC LSBs on SYSREF rising edge) in SYSREF sampler
...
Better visibility, better diagnostics, allows some changing of SYSREF frequency while keeping the same gateware.
2019-01-29 23:30:01 +08:00
9d0d02a561
jesd204sync: increase tolerance for coarse->final target in calibrate_sysref_target
...
There is plenty of slack (it only needs to meet timing at the RTIO frequency).
2019-01-29 16:48:55 +08:00
ed6aa29897
jesd204sync: print more information on test_slip_ddmtd error
2019-01-29 16:47:29 +08:00
2e8decbce3
kasli_sawgmaster: generate a HMC830 clock with Urukul
2019-01-29 15:06:45 +08:00
