wrpll: i2c functions, select_recovered_clock placeholder

artiq/firmware/libboard_artiq/lib.rs

@@ -26,6 +26,8 @@ pub mod rpc_queue;
 
 #[cfg(has_si5324)]
 pub mod si5324;
+#[cfg(has_wrpll)]
+pub mod wrpll;
 
 #[cfg(has_hmc830_7043)]
 pub mod hmc830_7043;

artiq/firmware/libboard_artiq/wrpll.rs

@@ -0,0 +1,190 @@
+mod i2c {
+    use board_misoc::{csr, clock};
+
+    #[derive(Debug, Clone, Copy)]
+    pub enum Dcxo {
+        Main,
+        Helper
+    }
+
+    fn half_period() { clock::spin_us(100) }
+    const SDA_MASK: u8 = 2;
+    const SCL_MASK: u8 = 1;
+
+    fn sda_i(dcxo: Dcxo) -> bool {
+        let reg = match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_in_read() },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_in_read() },
+        };
+        reg & SDA_MASK != 0
+    }
+
+    fn sda_oe(dcxo: Dcxo, oe: bool) {
+        let reg = match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_read() },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_read() },
+        };
+        let reg = if oe { reg | SDA_MASK } else { reg & !SDA_MASK };
+        match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_write(reg) },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_write(reg) }
+        }
+    }
+
+    fn sda_o(dcxo: Dcxo, o: bool) {
+        let reg = match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_read() },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_read() },
+        };
+        let reg = if o  { reg | SDA_MASK } else { reg & !SDA_MASK };
+        match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_write(reg) },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_write(reg) }
+        }
+    }
+
+    fn scl_oe(dcxo: Dcxo, oe: bool) {
+        let reg = match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_read() },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_read() },
+        };
+        let reg = if oe { reg | SCL_MASK } else { reg & !SCL_MASK };
+        match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_write(reg) },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_write(reg) }
+        }
+    }
+
+    fn scl_o(dcxo: Dcxo, o: bool) {
+        let reg = match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_read() },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_read() },
+        };
+        let reg = if o  { reg | SCL_MASK } else { reg & !SCL_MASK };
+        match dcxo {
+            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_write(reg) },
+            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_write(reg) }
+        }
+    }
+
+    pub fn init(dcxo: Dcxo) -> Result<(), &'static str> {
+        // Set SCL as output, and high level
+        scl_o(dcxo, true);
+        scl_oe(dcxo, true);
+        // Prepare a zero level on SDA so that sda_oe pulls it down
+        sda_o(dcxo, false);
+        // Release SDA
+        sda_oe(dcxo, false);
+
+        // Check the I2C bus is ready
+        half_period();
+        half_period();
+        if !sda_i(dcxo) {
+            // Try toggling SCL a few times
+            for _bit in 0..8 {
+                scl_o(dcxo, false);
+                half_period();
+                scl_o(dcxo, true);
+                half_period();
+            }
+        }
+
+        if !sda_i(dcxo) {
+            return Err("SDA is stuck low and doesn't get unstuck");
+        }
+        Ok(())
+    }
+
+    pub fn start(dcxo: Dcxo) {
+        // Set SCL high then SDA low
+        scl_o(dcxo, true);
+        half_period();
+        sda_oe(dcxo, true);
+        half_period();
+    }
+
+    pub fn restart(dcxo: Dcxo) {
+        // Set SCL low then SDA high */
+        scl_o(dcxo, false);
+        half_period();
+        sda_oe(dcxo, false);
+        half_period();
+        // Do a regular start
+        start(dcxo);
+    }
+
+    pub fn stop(dcxo: Dcxo) {
+        // First, make sure SCL is low, so that the target releases the SDA line
+        scl_o(dcxo, false);
+        half_period();
+        // Set SCL high then SDA high
+        sda_oe(dcxo, true);
+        scl_o(dcxo, true);
+        half_period();
+        sda_oe(dcxo, false);
+        half_period();
+    }
+
+    pub fn write(dcxo: Dcxo, data: u8) -> bool {
+        // MSB first
+        for bit in (0..8).rev() {
+            // Set SCL low and set our bit on SDA
+            scl_o(dcxo, false);
+            sda_oe(dcxo, data & (1 << bit) == 0);
+            half_period();
+            // Set SCL high ; data is shifted on the rising edge of SCL
+            scl_o(dcxo, true);
+            half_period();
+        }
+        // Check ack
+        // Set SCL low, then release SDA so that the I2C target can respond
+        scl_o(dcxo, false);
+        half_period();
+        sda_oe(dcxo, false);
+        // Set SCL high and check for ack
+        scl_o(dcxo, true);
+        half_period();
+        // returns true if acked (I2C target pulled SDA low)
+        !sda_i(dcxo)
+    }
+
+    pub fn read(dcxo: Dcxo, ack: bool) -> u8 {
+        // Set SCL low first, otherwise setting SDA as input may cause a transition
+        // on SDA with SCL high which will be interpreted as START/STOP condition.
+        scl_o(dcxo, false);
+        half_period(); // make sure SCL has settled low
+        sda_oe(dcxo, false);
+
+        let mut data: u8 = 0;
+
+        // MSB first
+        for bit in (0..8).rev() {
+            scl_o(dcxo, false);
+            half_period();
+            // Set SCL high and shift data
+            scl_o(dcxo, true);
+            half_period();
+            if sda_i(dcxo) { data |= 1 << bit }
+        }
+        // Send ack
+        // Set SCL low and pull SDA low when acking
+        scl_o(dcxo, false);
+        if ack { sda_oe(dcxo, true) }
+        half_period();
+        // then set SCL high
+        scl_o(dcxo, true);
+        half_period();
+
+        data
+    }
+}
+
+pub fn init() {
+    info!("initializing...");
+    i2c::init(i2c::Dcxo::Main);
+    i2c::init(i2c::Dcxo::Helper);
+}
+
+pub fn select_recovered_clock(rc: bool) {
+    info!("select_recovered_clock: {}", rc);
+}

artiq/firmware/satman/main.rs

@@ -9,7 +9,11 @@ extern crate board_artiq;
 
 use core::convert::TryFrom;
 use board_misoc::{csr, irq, ident, clock, uart_logger, i2c};
-use board_artiq::{spi, si5324, drtioaux};
+#[cfg(has_si5324)]
+use board_artiq::si5324;
+#[cfg(has_wrpll)]
+use board_artiq::wrpll;
+use board_artiq::{spi, drtioaux};
 use board_artiq::drtio_routing;
 #[cfg(has_hmc830_7043)]
 use board_artiq::hmc830_7043;
@@ -413,7 +417,7 @@ fn hardware_tick(ts: &mut u64) {
     }
 }
 
-#[cfg(rtio_frequency = "150.0")]
+#[cfg(all(has_si5324, rtio_frequency = "150.0"))]
 const SI5324_SETTINGS: si5324::FrequencySettings
     = si5324::FrequencySettings {
     n1_hs  : 6,
@@ -426,7 +430,7 @@ const SI5324_SETTINGS: si5324::FrequencySettings
     crystal_ref: true
 };
 
-#[cfg(rtio_frequency = "125.0")]
+#[cfg(all(has_si5324, rtio_frequency = "125.0"))]
 const SI5324_SETTINGS: si5324::FrequencySettings
     = si5324::FrequencySettings {
     n1_hs  : 5,
@@ -448,8 +452,13 @@ pub extern fn main() -> i32 {
     info!("software ident {}", csr::CONFIG_IDENTIFIER_STR);
     info!("gateware ident {}", ident::read(&mut [0; 64]));
 
-    i2c::init().expect("I2C initialization failed");
-    si5324::setup(&SI5324_SETTINGS, si5324::Input::Ckin1).expect("cannot initialize Si5324");
+    #[cfg(has_si5324)]
+    {
+        i2c::init().expect("I2C initialization failed");
+        si5324::setup(&SI5324_SETTINGS, si5324::Input::Ckin1).expect("cannot initialize Si5324");
+    }
+    #[cfg(has_wrpll)]
+    wrpll::init();
     unsafe {
         csr::drtio_transceiver::stable_clkin_write(1);
     }
@@ -490,8 +499,13 @@ pub extern fn main() -> i32 {
         }
 
         info!("uplink is up, switching to recovered clock");
-        si5324::siphaser::select_recovered_clock(true).expect("failed to switch clocks");
-        si5324::siphaser::calibrate_skew().expect("failed to calibrate skew");
+        #[cfg(has_si5324)]
+        {
+            si5324::siphaser::select_recovered_clock(true).expect("failed to switch clocks");
+            si5324::siphaser::calibrate_skew().expect("failed to calibrate skew");
+        }
+        #[cfg(has_wrpll)]
+        wrpll::select_recovered_clock(true);
 
         #[cfg(has_jdcg)]
         {
@@ -561,8 +575,11 @@ pub extern fn main() -> i32 {
         drtiosat_reset_phy(true);
         drtiosat_reset(true);
         drtiosat_tsc_loaded();
-        info!("uplink is down, switching to local crystal clock");
+        info!("uplink is down, switching to local oscillator clock");
+        #[cfg(has_si5324)]
         si5324::siphaser::select_recovered_clock(false).expect("failed to switch clocks");
+        #[cfg(has_wrpll)]
+        wrpll::select_recovered_clock(false);
     }
 }
 

artiq/gateware/targets/sayma_amc.py

@@ -130,26 +130,10 @@ class SatelliteBase(MiniSoC):
         self.add_csr_group("drtiorep", drtiorep_csr_group)
 
         self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
-        self.comb += platform.request("filtered_clk_sel").eq(1)
-        self.submodules.siphaser = SiPhaser7Series(
-            si5324_clkin=platform.request("si5324_clkin"),
-            rx_synchronizer=self.rx_synchronizer,
-            ultrascale=True,
-            rtio_clk_freq=rtio_clk_freq)
-        platform.add_false_path_constraints(
-            self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-        self.csr_devices.append("siphaser")
-        self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
-        self.csr_devices.append("si5324_rst_n")
-        i2c = self.platform.request("i2c")
-        self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
-        self.csr_devices.append("i2c")
-        self.config["I2C_BUS_COUNT"] = 1
-        self.config["HAS_SI5324"] = None
-
         if with_wrpll:
             # TODO: check OE polarity (depends on what was installed on the boards)
             self.comb += [
+                platform.request("filtered_clk_sel").eq(0),
                 platform.request("ddmtd_main_dcxo_oe").eq(1),
                 platform.request("ddmtd_helper_dcxo_oe").eq(1)
             ]
@@ -157,6 +141,23 @@ class SatelliteBase(MiniSoC):
                 main_dcxo_i2c=platform.request("ddmtd_main_dcxo_i2c"),
                 helper_dxco_i2c=platform.request("ddmtd_helper_dcxo_i2c"))
             self.csr_devices.append("wrpll")
+        else:
+            self.comb += platform.request("filtered_clk_sel").eq(1)
+            self.submodules.siphaser = SiPhaser7Series(
+                si5324_clkin=platform.request("si5324_clkin"),
+                rx_synchronizer=self.rx_synchronizer,
+                ultrascale=True,
+                rtio_clk_freq=rtio_clk_freq)
+            platform.add_false_path_constraints(
+                self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
+            self.csr_devices.append("siphaser")
+            self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
+            self.csr_devices.append("si5324_rst_n")
+            i2c = self.platform.request("i2c")
+            self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
+            self.csr_devices.append("i2c")
+            self.config["I2C_BUS_COUNT"] = 1
+            self.config["HAS_SI5324"] = None
 
         rtio_clk_period = 1e9/rtio_clk_freq
         gth = self.drtio_transceiver.gths[0]