6e43c41103
firmware: support building without SDRAM
2019-01-05 23:41:30 +08:00
2c3510497b
firmware: fix not(has_spiflash) build
2019-01-05 23:40:03 +08:00
a93fdb8c9d
drtio: disable all destinations in gateware at startup
...
Otherwise, kernels fail to get a RTIODestinationUnreachable exception when attempting
to reach a DRTIO destination that has never been up.
2019-01-04 23:42:12 +08:00
d6a3172a3e
update copyright year
2019-01-03 20:21:34 +08:00
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
David Nadlinger
e608d6ffd3
coredevice, firmware: Add rtio_input_timestamped_data
...
Integration tests to follow as part of an RTIO counter phy that
makes use of this.
2018-12-15 00:35:04 +00:00
David Nadlinger
8e30c4574b
firmware: Treat timestamps consistently as signed [nfc]
...
This matches other functions and the ARTIQ Python side, but
isn't actually an ABI change.
2018-12-15 00:02:18 +00:00
David Nadlinger
d4c393b2a8
firmware/ksupport: Update cfg(not(has_rtio)) stub signatures
...
This fixes up 8caea0e6d3
2018-12-11 01:22:48 +00:00
1b841805f6
Merge branch 'master' into new
2018-11-16 15:20:32 +08:00
d3483c1d26
kasli: fix SDRAM read delay reset/wrap issue. Closes #1149
2018-11-15 19:40:35 +08:00
whitequark
248c1cf7dc
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-13 00:58:20 +08:00
whitequark
68aad3e482
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-13 00:57:09 +08:00
whitequark
dd829afebd
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-12 15:42:07 +00:00
whitequark
583bba8777
Revert "firmware: workaround for RPC failures"
...
This reverts commit 59033d2588
2018-11-12 15:36:36 +00:00
whitequark
0edae64afb
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-12 15:30:59 +00:00
59033d2588
firmware: workaround for RPC failures
2018-11-12 19:51:54 +08:00
84a6b3d09b
runtime: fix DMA recording after now-pinning
2018-11-10 14:14:55 +08:00
c990b5e4f1
Merge remote-tracking branch 'origin/master' into new
2018-11-08 20:21:56 +08:00
David Nadlinger
9740032a94
firmware: Fix dma_record_output_wide
2018-11-08 11:06:43 +00:00
8caea0e6d3
gateware,runtime: optimize RTIO kernel interface further
...
* now pinning (TODO: atomicity)
* for inputs, merge request and timeout registers
2018-11-08 18:29:24 +08:00
3d0c3cc1cf
gateware,runtime: optimize RTIO output interface
...
* reduce address to 8 bits
* merge core, channel and address into 32-bit pre-computable "target"
* merge we register into data register
2018-11-07 23:39:58 +08:00
ad0254c17b
Merge branch 'switching125' into new
2018-11-07 22:03:18 +08:00
efd735a6ab
Revert "drtio: monitor RTIOClockMultiplier PLL ( #1155 )"
...
This reverts commit 469a66db61
2018-11-07 22:01:03 +08:00
Florent Kermarrec
3318925f4e
firmware/liboard_misoc/sdram: use similar loops on read_level_scan and read_level for consistent results
2018-10-16 09:40:39 +02:00
469a66db61
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-10-08 14:50:02 +02:00
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
1b7f403a4b
drtio: remove remote RTIO PHY resets
2018-09-20 11:10:32 +08:00
53a979e74d
rtio: cleanup resets
2018-09-20 10:58:38 +08:00
3d965910f7
Revert "drtio: implement per-destination underflow margins"
...
This reverts commit 142c952e3d
2018-09-19 17:05:48 +08:00
142c952e3d
drtio: implement per-destination underflow margins
2018-09-19 17:03:15 +08:00
62642957cd
runtime: fix DRTIO aux channel race condition
2018-09-19 11:16:21 +08:00
David Nadlinger
b482f5feae
firmware: Use larger ARP cache
...
This works around a problematic interaction between ARP cache
expiry in smoltcp (with its 3 seconds timeout before a discovery
request is sent) and our TCP keepalive settings, where the timeout
is reached before the keepalive had a chance to be sent.
GitHub: Closes #1150 .
2018-09-18 14:46:52 +00:00
whitequark
c33f74dabe
firmware: derive Clone for Mutex.
2018-09-15 15:24:44 +00:00
c8cd830118
drtio: implement get_rtio_destination_status for kernels
2018-09-15 19:11:22 +08:00
f7ad7a99e3
firmware: set DEST_COUNT to 0 without routing
2018-09-15 19:10:52 +08:00
d38755feff
drtio: implement destination state checks on operations
2018-09-15 15:55:45 +08:00
whitequark
1990ab35d3
firmware: implement mutexes.
2018-09-15 07:35:35 +00:00
f097b4104c
satman: not(has_drtio_routing) fixes
2018-09-15 12:06:47 +08:00
2f010e0109
runtime: improve moninj aux error logging
2018-09-15 10:44:41 +08:00
f8c6fa5ad6
typo
2018-09-15 10:43:36 +08:00
65da1fee4a
firmware: fix build without DRTIO
2018-09-14 20:38:41 +08:00
d19550daf8
firmware: simplify drtioaux function names
2018-09-14 20:32:09 +08:00
ae72e3a51e
firmware: add support for moninj and kern_hwreq over DRTIO switching
2018-09-14 20:26:39 +08:00
1ef39a98a7
drtio: implement per-destination buffer space
2018-09-13 16:16:32 +08:00
e95638e0a7
style
2018-09-13 15:54:28 +08:00
042b0065de
runtime: print destination up message for local RTIO
2018-09-13 14:10:52 +08:00
fa872c3341
firmware: implement DRTIO destination survey
2018-09-13 12:00:29 +08:00
6cf3db3485
satman: forward RTIO resets
2018-09-12 23:02:54 +08:00
5a9cc004f2
drtio: receive and print unsolicited aux packets
...
Helps with debugging and prevents the aux channel from getting stuck after packets arrive after the timeout.
2018-09-12 22:57:21 +08:00
0befec7d26
drtio: improve repeater error reports
2018-09-12 20:54:01 +08:00
420e1cb1d0
cri: fix firmware routing table access
2018-09-12 18:08:16 +08:00
e36a8536d7
runtime: better handling of aux timeouts
2018-09-12 17:31:23 +08:00
edf403b837
drtio: improve error reporting
2018-09-12 15:44:34 +08:00
95432a4ac1
drtio: remove old debugging features
2018-09-12 13:01:27 +08:00
5439abaa9d
satman: fix error messages
2018-09-11 20:10:52 +08:00
36e3fedfc6
runtime: print routing table at boot
2018-09-11 20:10:33 +08:00
e6bd835b5d
satman: fix rank setting
2018-09-11 20:04:51 +08:00
2679a35082
firwmare: propagate DRTIO routing table and rank all the way
2018-09-11 18:28:17 +08:00
c0c5867f9e
satman: increase stack size
...
Prevents crashing when running the routing code.
Will have to be shrunk back on Sayma RTM.
2018-09-11 18:23:51 +08:00
a23af67f2b
satman: print better debugging information on exception
2018-09-11 18:23:36 +08:00
f5b386c0d8
firmware: fix routing table formatting
2018-09-11 18:22:45 +08:00
b38c57d73b
firmware: send DRTIO routing table to satellite
2018-09-11 14:12:41 +08:00
3d29a7ed14
firmware: add fmt::Display to RoutingTable
2018-09-11 11:27:56 +08:00
2fff96802b
runtime: remove support for building without RTIO
2018-09-10 23:09:02 +08:00
19a14b68b1
runtime: program DRTIO routing table into gateware
2018-09-10 22:48:56 +08:00
264078baba
style
2018-09-10 22:29:35 +08:00
e01efbcb8a
runtime: merge sync_tsc and wait_tsc_ack
2018-09-10 22:17:00 +08:00
4d889c0c4e
firmware: improve DRTIO log messages
2018-09-10 21:40:02 +08:00
663432adbd
satman: load TSCs of downstream devices
2018-09-10 20:34:33 +08:00
bc1d3fda6a
satman: ping repeater links
...
Tested OK on hardware.
2018-09-10 20:17:13 +08:00
31bef9918e
firmware: fix drtio_routing compatibility with master and satellite
2018-09-10 20:16:42 +08:00
014cfd8dbd
firmware: add drtioaux routing packets
2018-09-09 22:44:25 +08:00
7ae44f3417
firmware: add routing table (WIP)
2018-09-09 21:49:28 +08:00
312256a18d
grabber: fix frame size off-by-1
2018-09-07 16:55:43 +02:00
87e0384e97
drtio: separate aux controller
...
This helps with managing CSR groups and heterogeneous (satellite/repeaters) DRTIO cores.
2018-09-05 17:56:58 +08:00
5f20d79408
drtio: add timeout on satellite internal CRI buffer space request
2018-09-05 14:12:11 +08:00
ccc58a0f84
satman: add 125 MHz Si5324 settings
...
from cjbe
2018-08-29 17:53:48 +00:00
whitequark
0e7419450e
firmware: update smoltcp.
...
This adds TCP window scaling support.
2018-08-20 00:26:40 +00:00
d1d26e2aa3
hmc7043: add explanation about HMC_SYSREF_DIV
2018-08-18 11:43:40 +08:00
f75a317446
hmc7043: automatically determine output groups
2018-08-18 11:43:23 +08:00
c498b28f88
hmc7043: disable FPGA_ADC_SYSREF
2018-08-18 11:42:57 +08:00
167e97efd2
sayma: support external RTM clocking
2018-08-17 22:57:54 +08:00
5c3e834c4d
ad9154: retry DAC initialization on STPL or PRBS failure
...
Works around #1127
2018-08-17 20:52:55 +08:00
David Nadlinger
0e32a165c2
satman: Fix build with Rust 1.28
...
The build was broken in 2648b1b7a1
2018-08-13 00:12:27 +01:00
whitequark
38d60100ff
firmware: optimize dma_record_output.
...
This removes a number of bounds checks and adds a fast path for
outputting exactly one word to DMA, which is the most common
operation.
2018-08-12 19:17:45 +00:00
whitequark
bdd18de2c1
firmware: globally enable LTO.
...
This used to crash with earlier rustc versions, but doesn't anymore,
and gives significant speedup (e.g. 2x on test_dma_record_time).
2018-08-12 19:17:45 +00:00
whitequark
2648b1b7a1
firmware: migrate to Rust 1.28.0.
...
This also updates / is a prerequisite for updating smoltcp.
Rationale for changes made:
* compiler_builtins is now shipped in the rust prefix.
* rustc's libpanic_unwind no longer works for us because it
has a hard dependency on Box (and it's a horrible hack);
fortunately, we only ever needed a personality function
from it.
* panic and oom handlers are now set in a completely different
way.
* allocators are quite different (and finally stable).
* NLL caused internal compiler errors in runtime, so code using
NLL was rewritten to not rely on it and it was turned off.
2018-08-12 19:17:45 +00:00
738d2c6bcb
hmc7043: REFSYNCIN → RFSYNCIN
2018-08-11 12:07:17 +08:00
f7678cc24a
grabber: refactor state machine
2018-08-07 18:07:46 +02:00
6cd2432e30
grabber: log all resolution changes
...
close #1120
2018-08-07 16:21:21 +02:00
99a15ca0c6
grabber: rationalize derived traits
2018-08-07 16:21:21 +02:00
49f7a1610f
sayma: use GTP_CLK1 only for all variants ( #1080 )
2018-08-07 20:53:14 +08:00
whitequark
7bd7b6592a
rpc_proto: serialize keywords correctly.
...
Fixes #1109 .
2018-08-07 06:47:09 +00:00
whitequark
a74958f01f
ksupport: raise RuntimeError on reraise with no inflight exception.
...
Fixes #1123 .
2018-08-07 05:53:13 +00:00
2008d02f4d
runtime: use different default IP and MAC for different kinds of boards
...
This helps reduce conflicts when having many boards on a development network.
2018-08-07 10:30:50 +08:00
bbe36b94f7
ad9154: enable sync in init
2018-08-06 19:02:27 +08:00
7f0b2ff594
jesd204sync: work around HMC7043 poor behavior with combined delays
...
The HMC7043 outputs poorly controlled signals when adjusting
two delays at once. This commit puts the DAC in one-shot SYSREF mode,
and only triggers synchronizations when SYSREF is stable.
2018-08-06 17:43:17 +08:00
f32f0126e2
Revert "ad9154: use continuous sync mode"
...
The HMC7043 is not really glitchless.
This reverts commit bd968211de
2018-08-06 16:59:53 +08:00
bd968211de
ad9154: use continuous sync mode
2018-08-06 00:27:10 +08:00
e83ee3a07a
hmc7043: disable GTP_CLK1 when not in use
...
Termination and biasing are not active at the FPGA when IBUFDS_GTE3 is
not instantiated, and driving a clock then leads to overvoltage.
2018-08-03 10:03:52 +08:00
6fc8439399
tweak moninj to allow old dashboard with new firmware
2018-08-02 19:34:14 +08:00
47740c8930
share moninj injection state between dashboards
...
Previously if one dashboard overrode a channel this was not visible on
any other dashboard - the channel appeared to operate normally.
2018-08-02 19:34:14 +08:00
whitequark
5871d13da8
firmware: actually compact in config::compact().
...
Fixes #1116 .
2018-08-01 16:27:48 +00:00
e4d48a78eb
drtio: wait for remote to ack TSC synchronization
...
Sayma takes a long time after TSC sync to align SYSREF, and this caused two issues:
1. Aux packets getting lost and causing error reports
2. DRTIO links reported up and kernels proceeding despite the DACs not being properly synced.
2018-07-26 20:28:17 +08:00
83de8b2ba2
drtio: add ping timeout during link init
2018-07-26 20:27:53 +08:00
446f791180
firmware: simplify SYSREF DRTIO alignment
2018-07-26 19:37:59 +08:00
f8c17528e7
satman: use new SYSREF code
2018-07-26 16:26:57 +08:00
32c95ac034
sayma: automated DAC SYSREF phase calibration
2018-07-26 16:23:55 +08:00
dbcf2fe9b4
firmware: remove 'chip found' messages on Sayma
2018-07-26 16:07:37 +08:00
d523d03f71
sayma: automated FPGA SYSREF phase offset calibration
2018-07-26 14:53:28 +08:00
0a9d3638ee
config: add write_int
2018-07-26 14:49:32 +08:00
19c51c644e
grabber: cleanup GRABBER_STATE
2018-07-24 19:08:51 +08:00
e71cbe53a6
firmware: cleanup Cargo.lock
2018-07-18 10:37:43 +08:00
13984385a8
firmware: version → ident
2018-07-15 17:40:17 +08:00
b27fa8964b
add variant in identifier string
...
Also add without-sawg suffixes on Sayma.
Closes #1060
Closes #1059
2018-07-15 17:21:17 +08:00
46fb5adac3
grabber: fix frequency counter formula
2018-07-12 20:14:38 +08:00
82def6b535
grabber: add frequency counter
...
Cameras are a bit obscure about what they output, this can help with troubleshooting.
2018-07-12 17:05:18 +08:00
29c35ee553
hmc7043: fix dumb mistake in previous commit
2018-07-12 13:01:41 +08:00
8802b930de
hmc7043: add delay after init
...
Delay required at step 9 of the "Typical Programming Sequence" (page 24 of the datasheet)
2018-07-12 12:37:12 +08:00
c66f9483f8
hmc7043: wait after changing delays
...
Allows for the SPI transaction to finish, and for the delay to stabilize.
2018-07-12 12:33:53 +08:00
1c191a62bf
sayma: tune SYSREF phases
2018-07-12 12:33:35 +08:00
773240bef4
hmc7043: test GPO before using
...
Based on code by David.
2018-07-12 11:30:24 +08:00
4843832329
hmc7043: check phase status on init. Closes #1055
...
Troubleshooting by David.
2018-07-11 19:45:24 +08:00
9397fa7f5a
hmc7043: unstick SYSREF FSM ( #1055 )
...
Troubleshooting by David.
Additionally, register 7D is broken.
Checking phase init state has to be done through another means.
2018-07-11 19:11:01 +08:00
4f56710e4b
grabber: add parser, report detected frame size in core device log
2018-07-10 02:06:37 +08:00
4eb26c0050
hmc7043: enable group 5
2018-07-03 14:16:31 +02:00
729ce58f98
sayma: use GTP_CLK1 to clock DRTIO satellite transceiver
...
This is required to get constant skew between the DRTIO transceiver clock
(which then generates the RTIO clock) and the siphaser reference clock.
Both the Si5324 and the RTM clock tree have non-deterministic in-to-out skew
at 150MHz due to dividers.
2018-06-28 11:23:40 +08:00
a65721d649
sayma: put RTM clock tree into the siphaser loop
...
* Fixes one bug where siphaser was one Si5324 output and the rest of the
system was clocked by the other. With the Si5324 settings we have, skew
between the outputs is not controlled.
* Puts the coaxial cable between AMC and RTM into the siphaser loop.
2018-06-27 21:46:55 +08:00
d49716dfac
satman: tune Sayma SYSREF phases
2018-06-27 18:09:35 +08:00
46c044099c
hmc7043,satman: verify alignment of SYSREF slips
2018-06-27 17:36:13 +08:00
7dfd70c502
hmc7043: make margin_{minus,plus} consistent with ad9154
2018-06-27 17:35:26 +08:00
4bbdd43bdf
hmc7043: do not freeze if SYSREF slip fails
2018-06-27 17:32:56 +08:00
a8a2ad68d3
runtime: tune Sayma SYSREF phases
2018-06-27 17:31:29 +08:00
84b3d9ecc6
bootloader: also check firmware CRC in SDRAM ( #1065 )
2018-06-23 11:28:12 +08:00
68530fde07
sayma: generate 100MHz from Si5324 on standalone and master targets
...
* Allow switching between DRTIO satellite and standalone without
touching the hardware.
* Allow operating standalone and master without an additional RF
signal generator.
2018-06-23 10:44:38 +08:00
whitequark
b6dd9c8bb0
runtime: support builds without RTIO DMA.
...
Fixes #1079 .
2018-06-23 00:56:21 +00:00
76fc63bbf7
jesd204: use separate controls for reset and input buffer disable
2018-06-22 11:38:18 +08:00
de7d64d482
sayma: clock JESD204 from GTP CLK2
...
This frees up GTP CLK1, which is routable to the SFP quads, for DRTIO.
2018-06-21 22:33:53 +08:00
07bcdfd91e
hmc7043: stricter check of FPGA SYSREF margin
2018-06-21 22:26:49 +08:00
e29536351d
drtio: resync SYSREF when TSC is loaded
2018-06-21 17:00:32 +08:00
5a2a857a2f
firmware: clean up SYSREF phase management
2018-06-21 16:23:41 +08:00
05e908a0fd
hmc7043: align SYSREF with RTIO
2018-06-21 15:54:42 +08:00
9741654cad
hmc7043: style
2018-06-21 15:54:42 +08:00
45e8263208
hmc7043: do not configure phases during initial init
...
They are determined later on.
2018-06-21 15:54:42 +08:00
whitequark
7cc3da4faf
firmware: do not lose the ".dirty" suffix in build versions.
...
Fixes #1074 .
2018-06-21 05:18:51 +00:00
whitequark
095ee28fd9
runtime: fix size values for bytes and bytearray RPCs.
...
Fixes #1076 .
2018-06-21 00:51:56 +00:00
814d0583db
hmc7043: improve smoothness of sysref phase control
2018-06-20 17:40:48 +08:00
5272c11704
typo
2018-06-20 17:05:20 +08:00
0c32d07e8b
ad9154: new sysref scan
...
Print margins around the pre-defined fixed phase.
Also report error if margins are too small.
The fixed phase is also changed by this commit (the value 88 is
from before the new HMC7043 initialization code, and is probably wrong).
2018-06-20 00:15:58 +08:00
3d0e92aefd
hmc7043: check that chip is disabled at startup
2018-06-19 23:49:17 +08:00
740e6863c3
hmc7043: add delay after releasing hardware reset
2018-06-19 23:48:48 +08:00
75b6cea52f
sayma: add SAWG to DRTIO satellite
2018-06-19 19:12:10 +08:00
eb3259b847
firmware: reduce number of DAC initialization attempts
...
Faster startup when one DAC is broken.
2018-06-19 19:10:23 +08:00
1d594d0c97
firmware: make DAC initialization failures non-fatal
...
This allows using RTMs with one broken DAC for development.
2018-06-19 19:09:38 +08:00
158b5e3083
satman: program Allaki
2018-06-19 18:09:05 +08:00
574892a4e5
firmware/serwb: cleanup and improve messaging
2018-06-19 15:11:03 +08:00
c862471165
typo
2018-06-19 14:35:24 +08:00
433273dd95
sayma: support RTM FPGA, HMC830 and HMC7043 in DRTIO master and satellite
2018-06-19 14:33:48 +08:00
476cfa0f53
si5324: improve lock messaging
2018-06-19 14:29:57 +08:00
d29b3dd588
hmc830: compile-time configurable reference frequency
2018-06-19 13:47:32 +08:00
0e640a6d6f
hmc7043: fix SYSREF to meet s/h at FPGA ( #794 )
2018-06-18 17:04:12 +08:00
6272052d15
ad9154: don't drive the bsm with txen pins
2018-06-18 10:04:42 +02:00
4f0c918dd3
slave_fpga: improve messaging
2018-06-17 00:27:27 +08:00
40baa8ecba
hmc7043: disable ch 10 and 11 group
2018-06-15 15:34:31 +00:00
edfae3c4ba
hmc7043: make fpga fabric clocks lvds
...
2 V common and 1.9 Vpp swing
is brutal to the banks (HP 1.8V AMC and RT 1.8V RTM)
2018-06-15 14:24:33 +00:00
f385add8b1
slave_fpga: disable cclk and din drive when done
...
to guard against accidental contention (old rtm gateware
but #813 rework done)
2018-06-13 16:26:48 +00:00
a9a25f2605
sayma_rtm: drive ref_lo_clk_sel, and set clk muxes early
2018-06-12 20:00:12 +02:00
Thomas Harty
b90a8fcc82
Merge branch 'master' of https://github.com/m-labs/artiq
2018-06-12 14:55:22 +01:00
ion
28ecf81c6c
Sayma: HMC7043 init and detect no longer need results.
2018-06-12 13:10:26 +01:00
ion
c8935f7adf
Sayma: bypass dividers where possible to minimize noise (nb this changes the output skew).
2018-06-12 12:56:04 +01:00
hartytp
7a0140ecb2
Sayma HMC830: update interface and register writes. ( #1068 )
...
* Break the HMC830 init into separate functions for general purpose (but, integer-N) init, setting dividers and checking lock
* Use 1.6mA ICP (which the loop filter was optimized for)
* Go through the data sheet carefully and set all registers to the correct value (e.g. ensure that all settings are correctly optimized for integer-N usage)
* Change divider values (now using 100MHz PFD, which should give lower noise in theory)
2018-06-12 12:37:17 +01:00
a9d97101fc
slave_fpga: add another check
2018-06-12 10:24:04 +02:00
a143e238a8
savel_fpga: get rid of unneeded config
2018-06-12 10:24:04 +02:00
4912f53ab4
slave_fpga: board_misoc
2018-06-12 10:24:04 +02:00
hartytp
cb6e44b23a
Sayma: disable unused HMC7043 outputs.
2018-06-12 16:18:20 +08:00
af88c4c93e
clean up hmc7043 reset
2018-06-05 20:41:48 +08:00
Thomas Harty
988054f4bb
Sayma: fix mistake in HMC7043 init code.
2018-06-05 19:22:04 +08:00
Thomas Harty
bd1ac7cf3b
Configure HMC7043 to give deterministic phase differences between its outputs
2018-06-05 19:22:04 +08:00
Thomas Harty
ac5c4913ec
Sayma RTM: hold hmc7043 in reset/mute state during init.
2018-06-05 19:22:04 +08:00
Florent Kermarrec
b82158a2de
firmware/ad9154: add stpl test
2018-06-05 02:08:57 +02:00
Florent Kermarrec
925b47b077
firmware/ad9154: reset the dac between each configuration attempt
2018-06-04 14:03:26 +02:00
whitequark
d686d33093
runtime: print hex dumps around PC/EA in case of exception.
...
For #1026 .
2018-06-01 21:17:59 +00:00
whitequark
2e09307d8d
firmware: use writeln instead of write in UART logger.
2018-05-29 03:16:52 +00:00
560889372f
firmware: grabber support
2018-05-29 10:26:36 +08:00
b860302a9a
firmware: fix typo in UART logger
2018-05-28 17:25:23 +00:00
whitequark
2b7d98eb04
firmware: enable all log levels when creating UART logger.
...
The default is all off.
2018-05-28 16:49:25 +00:00
Florent Kermarrec
bcb9c3d09d
firmware/serwb: move prbs_test outside of wait_init, add wishbone_test
2018-05-24 16:53:47 +02:00
Florent Kermarrec
353767bfdb
firmware/hmc830: add VCO subsystem register 6 programming (suggested by hartytp, tested on hardware without regression)
2018-05-24 16:49:49 +02:00
Florent Kermarrec
ad89c42acc
firmware/serwb: automatically adjust prbs test delay to prbs test cycles, increase prbs test cycles
2018-05-24 10:20:55 +02:00
Florent Kermarrec
19e5280824
firmware/ad9154: cleanup DAC init
...
- Split dac_setup in dac_reset, dat_detect & dac_setup.
- Only do one reset/detection.
- Configure before doing SYSREF scan (otherwise scan don't work at the first scan after power up).
- Do the spi_setup in each function.
2018-05-24 09:34:00 +02:00
Florent Kermarrec
fa3b48737b
firmware/hmc830: Added magic word to HMC830 init sequence (from gkasprow & marmeladapk)
2018-05-24 09:23:00 +02:00
b10d3ee4b4
make RTIO clock switch optional and simplify
...
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
whitequark
5744d97d59
firmware: adjust backtrace addresses correctly.
2018-05-17 08:13:55 +00:00
d4f074b1e1
firmware: fix Allaki addressing. Closes #993
2018-05-17 16:02:21 +08:00
whitequark
31c6c79204
firmware: implement an edge profiler.
...
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
2018-05-16 21:53:53 +00:00
a640041844
firmware: improve ad9154/hmc830/hmc7043 messaging
2018-05-16 23:15:17 +08:00
fedf7f0c87
firmware/ad9154: cleanup sysref scan and run everytime
2018-05-16 23:01:19 +08:00
1364cd2948
firmware/hmc830_7043: break out HMC830 SPI mode selection
2018-05-16 22:46:45 +08:00
0aadd3a361
firmware/hmc830_7043: improve messaging
2018-05-16 22:46:45 +08:00
whitequark
4d06c1d84b
coredevice.CommKernel: modernize. NFC.
2018-05-16 14:40:14 +00:00
whitequark
ca93b94aea
firmware: move config requests to management protocol.
...
They were only in session protocol because of historical reasons.
2018-05-16 14:32:49 +00:00
Florent Kermarrec
7fe49a78d2
firmware/runtime/session: fix compilation when no rtio core
2018-05-15 23:47:47 +02:00
whitequark
8128a814f6
firmware: update dependencies.
2018-05-15 18:17:32 +00:00
whitequark
1b0384c513
firmware: fix satman build.
2018-05-15 16:35:05 +00:00
whitequark
07b713fdad
firmware: use upstream log_buffer.
2018-05-15 15:19:20 +00:00
whitequark
9f5b76253c
firmware: remove some unnecessary unwraps.
2018-05-15 15:05:19 +00:00
whitequark
e5796e26e1
firmware: remove unused #![feature(untagged_unions)].
2018-05-15 15:05:19 +00:00
whitequark
b54926134c
firmware: update the signature of #[lang="panic_fmt"].
2018-05-15 15:05:19 +00:00
Florent Kermarrec
c18a73d45f
sayma_amc/rtm: use new serwb low-speed phy
2018-05-15 16:40:50 +02:00
whitequark
9347f6e00c
firmware: use a dedicated error type in the scheduler.
...
After this commit, error handling does not normally allocate
(session::Error::{Load,Unexpected} still allocate, but those two
are very rare).
Good riddance to libstd_artiq.
2018-05-15 14:19:44 +00:00
whitequark
479cb9a857
firmware: use dedicated error types for every protocol and thread.
...
Good riddance to io::Error::Unrecognized.
2018-05-15 13:27:23 +00:00
whitequark
514eab3d39
Update Rust to 1.26.0.
2018-05-15 12:47:51 +00:00
whitequark
26faaad2b7
firmware: remove io::Result<T, E> in favor of Result<T, impl Fail>.
...
This doesn't yet use impl Fail since std_artiq::io::Error doesn't
impl it.
2018-05-15 08:29:03 +00:00
whitequark
140ca729aa
firmware: rename io::Error::{UnexpectedEof→UnexpectedEnd}.
...
We don't even have files.
2018-05-15 08:27:45 +00:00
whitequark
ce0593315b
firmware: move {ProtoRead,ProtoWrite} to the root of libio.
2018-05-15 08:16:09 +00:00
whitequark
4416c04ae1
firmware: use the failure crate in libio.
2018-05-15 07:40:13 +00:00
whitequark
9e8f8bb669
firmware: extract io::Cursor into its own file.
...
Also remove unused io::CursorError.
2018-05-15 06:24:04 +00:00
whitequark
a4ab236af3
firmware: simplify some uses.
2018-05-14 19:24:14 +00:00
whitequark
d93aa13fd6
firmware: use upstream compiler_builtins again.
...
I've fixed i128 in LLVM, so there is no need in our fork anymore.
2018-05-14 19:11:57 +00:00
whitequark
5ead27f2e1
firmware: eliminate uses of std_artiq::io::{Read,Write} from runtime.
2018-05-14 19:11:57 +00:00
whitequark
cf33ba748d
firmware: eliminate non-io uses of std_artiq from runtime.
...
Just replace these with references to alloc.
2018-05-14 19:11:57 +00:00
whitequark
ae50196186
firmware: rename libproto to libproto_artiq.
...
libproto_artiq only has ARTIQ-specific protocols.
2018-05-14 18:09:44 +00:00
whitequark
02b8426f60
firmware: rename libboard to libboard_misoc.
...
By analogy with libbuild_misoc. Hopefully one day it actually gets
moved to misoc...
2018-05-14 18:09:44 +00:00
whitequark
1ff42683d9
firmware: merge libamp into libboard_artiq.
...
All gateware interfaces live in libboard_artiq, but libamp predates
libboard_artiq.
2018-05-14 17:33:25 +00:00
whitequark
764386c9e3
firmware: split libdrtioaux into libproto and libboard_artiq modules.
...
All other protocol code lives in libproto, and all other gateware
interfaces live in libboard_artiq.
2018-05-14 17:26:59 +00:00
whitequark
6a10d54432
firmware: migrate rpc_proto to new libio.
...
This closes an old and horrible issue in that some code in ksupport
may implicitly try to allocate and we'll never know until it crashes
at runtime inside liballoc_stub.
This also removes liballoc_stub.
This also removes ReadExt and WriteExt from libproto.
Hooray!
2018-05-14 17:26:59 +00:00
whitequark
09617c9f5e
firmware: migrate session_proto to new libio.
2018-05-14 15:17:32 +00:00
whitequark
e9c88e32e6
firmware: migrate moninj_proto to new libio.
2018-05-14 15:17:32 +00:00
whitequark
e292c8ab65
firmware: migrate mgmt_proto to new libio.
2018-05-14 15:17:32 +00:00
whitequark
976bb5e935
firmware: migrate analyzer_proto to new libio.
2018-05-14 12:51:59 +00:00
whitequark
2999756493
firmware: impl std_artiq::io::{Read,Write} for io::{Read,Write}.
2018-05-14 12:51:59 +00:00
whitequark
bfc8fd0807
firmware: add io::Error::Unrecognized variant and use it in drtioaux.
2018-05-14 12:51:59 +00:00
whitequark
7e299563df
firmware: mark many functions in libio as #[inline].
2018-05-14 11:22:56 +00:00
whitequark
368d6f9bfb
satman: remove useless _Unwind_Resume.
2018-05-14 11:22:56 +00:00
whitequark
42420e094a
satman: don't unwrap so much in process_aux_packet.
...
This shrinks the code by almost 4K.
2018-05-14 11:22:56 +00:00
whitequark
56a29b91fc
firmware: implement ConsoleLogger, use it in satman.
2018-05-14 10:45:11 +00:00
whitequark
5d43d457d2
satman: eliminate heap.
2018-05-14 10:05:02 +00:00
whitequark
46c8afc56c
firmware: implement libio and use in in drtioaux.
2018-05-14 10:02:39 +00:00
whitequark
d543c9aa63
firmware: backtrace_artiq → unwind_backtrace.
...
This crate isn't ARTIQ-specific.
2018-05-14 07:33:00 +00:00
whitequark
f383a470fe
satman: do not debug print unexpected aux packets.
...
This shrinks firmware by 2.8K.
2018-05-13 13:43:39 +00:00
whitequark
aa42a69849
libdrtioaux: always inline read/write helpers.
...
This shrinks Packet::{read_from,write_to} by 1K.
2018-05-13 13:39:14 +00:00
whitequark
32522be413
satman: use 1K log buffer and 4K stack.
...
This reduces memory requirements in half.
2018-05-13 13:28:00 +00:00
Florent Kermarrec
6b4bbe31f7
firmware/ad9154: use fixed hmc7043 sysref phase (found with scan)
2018-05-12 00:12:59 +02:00
Florent Kermarrec
3c49eba0a0
firmware/hmc830_7043: put hmc7043 in sleep mode before hmc830 initialization
...
hmc7043 seems to generate broadband noise when not initialized. This allows isolating issues. If hmc830 still does not always lock correctly, then this is not related to hmc7043 broadband noise.
2018-05-12 00:06:49 +02:00
2cece47b10
firmware/si5324: fix compilation warning
2018-05-09 20:00:08 +08:00
Florent Kermarrec
9de08f85c6
firmware/ad9154: reduce verbosity of dac_sysref_cfg
2018-05-09 10:57:00 +02:00
whitequark
c646409dbe
firmware: fix order of bits clocked into hmc542.
...
Fixes #993 .
2018-05-05 03:12:25 +00:00
whitequark
fd2b8d5f8f
firmware: raise hmc542 log level to INFO.
2018-05-05 02:59:49 +00:00
whitequark
9704fb837f
firmware: fix warnings in ad9154 driver.
2018-05-05 01:55:42 +00:00
whitequark
8a70c18d1e
firmware: add debug output to hmc542 driver.
2018-05-05 01:53:30 +00:00
whitequark
68ef09ed73
firmware: stop profiler before rebooting too.
2018-05-05 01:52:44 +00:00
whitequark
4f29d9134f
firmware: update log_buffer.
...
Fixes #986 .
2018-05-05 01:18:59 +00:00
whitequark
b1d349cc1b
firmware: implement a sampling profiler.
...
Does not yet support constructing call graphs.
2018-05-05 00:44:40 +00:00
whitequark
9857dfcd7d
firmware: add irq::Exception to libboard.
2018-05-04 18:41:03 +00:00
whitequark
623614f835
Update LLVM to 6.0.0 and Rust to 1.25.0.
2018-05-01 08:57:37 +00:00
Florent Kermarrec
4e2d9abaf7
firmware/ad9154: combine analog and digital delay of hmc7043 for sysref scan
2018-04-27 14:32:03 +02:00
Florent Kermarrec
3802c7badb
firmware/ad9154: add sysref scan/conf for jesd sc1
2018-04-27 13:20:20 +02:00
whitequark
3b054855ec
firmware: add allocator debug feature, invoked by artiq_coredebug frontend.
2018-04-21 19:39:46 +00:00
whitequark
873324d52b
firmware: don't truncate queued RPCs ( fixes #985 ).
2018-04-21 19:39:46 +00:00
whitequark
0d5fd1e83d
runtime: fix race condition in log extraction code paths ( #979 ).
...
The core device used to panic if certain combinations of borrows
of the log buffer happened. Now they all use .try_borrow_mut().
2018-04-20 15:26:00 +00:00
Florent Kermarrec
fe689ab4f2
firmware/serwb: add link test, use info! instead of debug! for link settings (useful to analyze logs from others boards)
2018-04-17 19:24:22 +02:00
416232cb64
runtime: do not reset RTIO PHY on core.reset(). Closes #971
2018-03-28 10:51:07 +08:00
f2cc2a5ff2
firmware: reset local RTIO PHYs on startup ( #958 )
2018-03-22 16:29:31 +08:00
f4719ae24b
sdram: clean up console output
2018-03-20 15:42:49 +01:00
206664afd9
sdram: compact read_level output
2018-03-20 10:16:05 +00:00
495625b99d
bootloader: repeat memory test 4 times
2018-03-20 09:57:49 +00:00
6fb0cbfcd3
sdram: clean up, make read_level robust to wrap around
...
* fix a few rust warnings
* also do eye scans on kintex
2018-03-20 09:57:49 +00:00
3abb378fbe
i2c: unused variable
2018-03-20 09:56:26 +00:00
276b0c7f06
sdram: reject read delay wrap arounds
2018-03-20 00:28:41 +01:00
4b3f408143
sdram: simplify read level scan
2018-03-19 18:41:56 +00:00
845784c180
kusddrphy: use first and last tap that yield many valid reads
2018-03-19 17:54:26 +00:00
ed2e0c8b34
sayma/sdram/scan: test each tap 1024 times
2018-03-20 00:59:31 +08:00
whitequark
c86df8e13e
firmware: try to unstuck the I2C bus if it gets stuck.
...
Fixes #957 .
2018-03-19 06:23:23 +00:00
whitequark
9ea7d7a804
firmware: allow building without system UART.
2018-03-14 18:34:31 +00:00
999ec40e79
bootloader: print gateware ident
2018-03-13 00:11:25 +08:00
2caeea6f25
update copyright year
2018-03-13 00:09:13 +08:00
1d081ed6c2
drtio: print diagnostic info on satellite write underflow ( #947 )
2018-03-12 23:41:19 +08:00
Florent Kermarrec
5af4609053
libboard/sdram: limit write leveling scan to "512 - initial dqs taps delay" on ultrascale
2018-03-09 19:06:47 +01:00
Florent Kermarrec
a95cd423cc
libboard/sdram: add gap for write leveling
2018-03-09 18:53:57 +01:00
Florent Kermarrec
8f6f83029c
libboard/sdram: add write/read leveling scan
2018-03-09 13:50:51 +01:00
Florent Kermarrec
b0b13be23b
libboard/sdram: rename read_delays to read_leveling
2018-03-09 09:23:20 +01:00
Florent Kermarrec
8475c21c46
firmware/libboard/sdram: kusddrphy now use time mode for odelaye3/idelaye3, now reloading dqs delay_value (500ps) with software
2018-03-08 10:00:00 +01:00
0adbbd8ede
drtio: reset aux packet gateware after locking to recovered clock
...
Closes #949
2018-03-08 15:41:13 +08:00
7afb23e8be
runtime: demote dropped and malformed packets msgs to debug
2018-03-07 14:28:21 +01:00
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
74d1df3ff0
firmware: implement si5324 skew calibration
2018-03-07 10:57:30 +08:00
e6e5236ce2
firmware: fix si5324 select_recovered_clock
2018-03-07 10:57:30 +08:00
c2d2cc2d72
runtime: fix setup_si5324_as_synthesizer
2018-03-07 10:57:30 +08:00
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
257bef0d21
slave_fpga: print more info
2018-03-06 14:26:26 +01:00
a274af77d5
runtime: fix compilation without DRTIO
2018-03-05 00:43:42 +08:00
432e61bbb4
drtio: add kernel API to check for link status. Closes #941
2018-03-05 00:23:55 +08:00
928d5dc9b3
drtio: raise RTIOLinkError if operation fails due to link lost ( #942 )
2018-03-04 01:02:53 +08:00
ba74013e3e
runtime: add a missing overflow flag reset
2018-03-03 13:16:21 +08:00
1c57d27ae2
slave_fpga: use sayma_rtm magic
2018-03-01 18:32:19 +01:00
de63e657b8
kasli/si5324: lock to 100 MHz with highest available bandwidth
2018-03-01 14:49:53 +01:00
abd160d143
slave_fpga: check DONE before loading
2018-03-01 19:53:34 +08:00
a04a36ee36
firmware: move wait for write completion to read()
2018-03-01 11:37:33 +01:00
a6ae08d8b8
firmware/spi: work around cs_polarity semantics
...
The semantics differ between the RTIO and CSR interface.
2018-03-01 11:19:18 +01:00
6fbe0d8ed8
hmc830: be explicit about SPI mode selection
2018-03-01 11:19:18 +01:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
68278e225d
slave_fpga: check for INIT low
2018-03-01 17:28:01 +08:00
whitequark
14f6fa6699
firmware: fix a warning.
2018-03-01 01:25:55 +00:00
whitequark
d051cec0dd
firmware: remove useless module.
2018-03-01 01:22:52 +00:00
0c49201be7
firmware: add slave fpga serial load support
...
based on whitequark's work in f95fb27m-labs/artiq#813
2018-02-28 19:27:52 +01:00
cedecc3030
Revert "firmware: Sayma RTM FPGA bitstream loading prototype ( #813 )."
...
This reverts commit f95fb273f1
2018-02-28 18:43:56 +01:00
whitequark
f95fb273f1
firmware: Sayma RTM FPGA bitstream loading prototype ( #813 ).
2018-02-28 16:46:23 +00:00
96423882f2
fix 4d6619f3b
2018-02-22 15:27:54 +08:00
4d6619f3bc
satman: send ResetAck
2018-02-22 15:17:44 +08:00
Florent Kermarrec
5eda894db4
firmware/libboard/sdram: increase read_delays dead zone to 32 on KU
2018-02-21 19:36:37 +01:00
whitequark
96f697ec96
firmware: update compiler_builtins to unbreak __gtdf2.
...
Fixes #883 .
2018-02-21 15:21:48 +00:00
Florent Kermarrec
afc16a67b6
firmware/liboard/sdram.rs: iterate read multiple times in read_delays to avoid false positives
2018-02-21 14:15:35 +01:00
738654c783
drtio: support remote RTIO resets
2018-02-20 18:48:54 +08:00
ad2c9590d0
drtio: rewrite/fix reset and link bringup/teardown
2018-02-20 17:26:43 +08:00
83abdd283a
drtio: signal stable clock input to transceiver
2018-02-18 22:29:30 +08:00
c87636ed2b
si5324: fix cfb21ca
2018-02-18 11:38:20 +01:00
039dee4c8e
si5324: rename SI5324_FREE_RUNNING to SI5324_AS_SYNTHESIZER
...
The previous name was causing confusion with the FREE_RUN bit
that connects the crystal to CLKIN2.
2018-02-17 13:54:50 +08:00
cfb21ca126
si5324: fix usage of external CLKIN2 reference
2018-02-17 13:52:01 +08:00
fb8b36cd41
clean up ccc279b8
2018-02-17 12:10:46 +08:00
hartytp
ccc279b8da
rewrite HMC7043 init code without using ADI GUI outputs, working analog/digital delay
2018-02-17 12:07:11 +08:00
e41f49cc75
kasli: opticlock 125 MHz, mark external reference case broken
2018-02-16 17:23:15 +00:00
4d42df2a7c
kasli: set up Si5324 in standalone operation
2018-02-15 20:32:58 +08:00
c5ae81f452
satman: remove unused 62.5MHz Si5324 settings
2018-02-15 20:29:51 +08:00
d7387611c0
sayma: print RTM gateware version
2018-02-15 19:31:58 +08:00
whitequark
fe50018037
firmware: make network tracing runtime switchable.
2018-02-14 23:03:20 +00:00
df177bfd5b
use new misoc identifier
2018-02-13 20:38:48 +08:00
00f42f912b
rename 'RTM identifier' to 'RTM magic number'
...
Avoids confusion with the MiSoC identifier (containing the ARTIQ version).
2018-02-13 20:02:51 +08:00
Florent Kermarrec
e80b481032
firmware/libboard_artiq/hmc830_7043.rs: add template for sys_ref phase configuration for dac1/dac2 and fpga
2018-02-05 13:40:17 +01:00
Florent Kermarrec
e50bebb63d
firmware/liboard_artiq/ad9154.rs: add checks for jesd subclass 1 (verify that we receive the sysref and that phase error is within the specified window error threshold).
2018-02-05 13:39:30 +01:00
whitequark
807eb1155b
Update smoltcp.
...
Fixes #902 .
2018-01-30 03:29:08 +00:00
whitequark
d58393a1e5
runtime: build with -Cpanic=unwind.
...
This is required for backtraces to function. I'm not sure how it
turned out that master had -Cpanic=abort.
2018-01-26 23:01:24 +00:00
0d2f89db53
si5324: chip does not ack RST_REG write
2018-01-25 11:06:19 +08:00
cfffd9e13d
si5324: kasli support
2018-01-23 13:17:03 +08:00
c3323f0d57
hmc830: improve lock failure error report
2018-01-20 15:42:53 +08:00
hartytp
37fa3b29da
firmware: add register dump on HMC830 lock timeout.
2018-01-20 00:19:31 +00:00
Florent Kermarrec
9eb13aba3c
liboard_artiq/hmc830_7043: allow sysref digital/analog delay configuration (will need to be adjusted for jesd subclass1)
2018-01-19 17:19:02 +01:00
whitequark
80cbef0031
firmware: always reset PHY when initializing Ethernet.
...
Fixes #897 .
2018-01-19 04:56:11 +00:00
whitequark
1f82ceaa85
firmware: add HMC542 (Allaki) support.
2018-01-19 04:47:26 +00:00
Florent Kermarrec
07f4e2e35a
libboard_artiq/ad9154: fix prbs test (only keep prbs7) and
...
always do it after ad9154 initialization
2018-01-18 08:19:37 +01:00
whitequark
1e896d4ba8
firmware: fix warnings.
2018-01-17 00:48:46 +00:00
Florent Kermarrec
702c35821b
libboard_artiq/ad9154: add dac_status and dac_prbs (untested)
2018-01-15 22:15:35 +01:00
7429ee4fb6
firmware: make read leveling robust for KUS SDRAM
...
Increases the initial delay step into the valid read window as
with the original delay I was not getting out of the noisy
transition window, as evidenced by seeing read delay windows
of only 8 LSB ~10% of the time, leading to failing memory
tests
2018-01-12 10:35:38 +08:00
94d51d1364
firmware: fix drtio_dbg module syntax
2018-01-10 12:15:23 +08:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
whitequark
267c699835
firmware: support DDRPHY without write leveling ( fixes #886 ).
...
Currently, this is kasli.
2018-01-09 02:41:02 +00:00
whitequark
07ccb9eebd
firmware: support configuration without ethphy ( #886 ).
...
Currently, this is kasli.
2018-01-08 22:16:17 +00:00
whitequark
3a3f44af53
firmware: update smoltcp.
2018-01-08 21:41:53 +00:00
whitequark
987a9c8308
conda: update rustc to 1.23.0.
2018-01-08 21:39:15 +00:00
161a414567
serwb: debug print on error
2018-01-04 22:23:59 +08:00
e1a75ac1c1
runtime: set log level early
...
We want to debug startup.
2018-01-04 22:19:48 +08:00
whitequark
fc9766d2fa
firmware: reset ethphy before initializing smoltcp ( fixes #884 ).
2018-01-04 11:42:35 +00:00
whitequark
b7f38b123b
frimware: update to log 0.4.
2018-01-01 11:45:55 +00:00
whitequark
a371b25525
bootloader: allow using without Ethernet.
2017-12-31 09:21:28 +00:00
whitequark
70ebe431fd
satman: fix build after b8f3d28b.
2017-12-31 09:21:02 +00:00
whitequark
e1253db0e8
firmware: update crc dependency, use it in libdrtioaux.
2017-12-31 09:16:11 +00:00
whitequark
b8f3d28bc0
firmware: update compiler_builtins dependency and move it to libboard.
...
This is so that we only specify it once.
2017-12-31 09:16:11 +00:00
a897d82324
ad9154: retry initialization ( #727 )
2017-12-31 11:27:43 +08:00
whitequark
3505878176
bootloader: add basic network support.
2017-12-28 15:26:12 +00:00
whitequark
d2687ce3c4
firmware: fix a typo replacing spiflash::SECTOR_SIZE with PAGE_SIZE.
2017-12-28 15:26:12 +00:00
whitequark
33e0393e4a
firmware: move mod ethmac to libboard.
2017-12-28 14:40:15 +00:00
whitequark
55cfdec644
firmware: enlarge bootloader partition to 4 sectors.
2017-12-28 14:39:26 +00:00
whitequark
acd13837ff
firmware: implement the new bootloader.
2017-12-28 13:18:51 +00:00
whitequark
b9754e7108
firmware: deduplicate libbuild_misoc and libbuild_artiq.
2017-12-28 13:18:51 +00:00
whitequark
d94db1de5d
Revert accidentally committed parts of 1b9b5602.
2017-12-28 08:23:34 +00:00
whitequark
fcc438524c
firmware: use main.rs as the root source for non-library crates. NFC.
2017-12-28 08:20:23 +00:00
whitequark
1b9b560242
firmware: use libbuild_misoc in libdrtioaux. NFC.
2017-12-28 08:20:23 +00:00
whitequark
8f33061a6d
firmware: fix sayma_amc_standalone build with sawg.
2017-12-28 08:20:23 +00:00
4ea801b2ea
firmware: si5324 moved to board_artiq
2017-12-28 15:45:45 +08:00
whitequark
3b18ece3b7
satman: update for changes in firmware elsewhere.
2017-12-28 07:36:33 +00:00
whitequark
d3066e5044
firmware: oops, misoc #[cfg]s were missing from libboard_artiq.
2017-12-28 07:36:33 +00:00
whitequark
ca419aa3c2
firmware: split out libboard_artiq from libboard.
2017-12-28 07:07:00 +00:00
whitequark
b443fbd8f7
runtime: remove #[repr(simd)] hack.
2017-12-28 04:46:27 +00:00
whitequark
7687a34285
firmware: remove dependency on compiler-rt.
2017-12-28 04:08:29 +00:00
whitequark
4dfe71676e
firmware: remove dependency on libbase.
2017-12-28 04:03:27 +00:00
whitequark
68f128944a
firmware: clean up makefiles.
2017-12-27 23:10:47 +00:00
whitequark
d7cb4963e1
firmware: prepare config block for access from BIOS/bootloader.
...
* remove liballoc dependency from mod config,
* move mod config to libboard,
* move config sector immediately after BIOS sector.
2017-12-27 21:28:40 +00:00
whitequark
5a2cbe7088
runtime: remove borrow_mut!() in favor of backtraces.
2017-12-27 19:15:25 +00:00
whitequark
edfacbd063
conda: ship runtime.elf in board-specific packages.
...
This is so that backtraces may be symbolized.
2017-12-26 21:50:31 +00:00
whitequark
8b4a006855
runtime: update smoltcp.
2017-12-26 14:33:56 +00:00
whitequark
71eca5ad61
runtime: fix some final flash storage issues.
2017-12-26 14:09:17 +00:00
whitequark
188764693e
runtime: we're growing, put storage at 1M instead of 512K.
2017-12-26 03:34:16 +00:00
whitequark
e2513a2401
runtime: ensure flash storage never overlaps with runtime sections.
2017-12-26 03:31:37 +00:00
whitequark
6e341da3a1
runtime: simplify. NFC.
2017-12-26 02:31:28 +00:00
whitequark
061fb3dcd5
runtime: remove accidentally committed parts of a Makefile.
2017-12-25 20:30:13 +00:00
whitequark
230f2e5e18
runtime: print (address-only) backtraces on core device panics.
2017-12-25 18:32:41 +00:00
whitequark
3eec15c01d
firmware: fix compatibility with newer rustc. NFC.
2017-12-25 17:16:05 +00:00
00ed51f6f4
satman: use new alloc_list ( #880 )
2017-12-23 22:15:39 +08:00
a6ffe9f38d
drtio: add Sayma top-level designs
2017-12-21 23:08:56 +08:00
a23251276d
Revert "sayma: set up Si5324 for RGMII clock rerouting"
...
This reverts commit 2b01aa22b6
2017-12-21 14:42:15 +08:00
whitequark
701308474f
runtime: update smoltcp.
2017-12-19 15:51:03 +00:00
whitequark
aaba36be7a
runtime: log moninj messages at TRACE level, like all others.
2017-12-16 22:39:13 +00:00
whitequark
8cece4f260
runtime: hotswap slightly more carefully.
...
This generally lets some last characters out of UART, last ACKs
out of queues, etc. Nothing guaranteed though.
2017-12-16 22:39:13 +00:00
whitequark
4a9d8c9459
runtime: fix a warning.
2017-12-16 22:39:13 +00:00
2b01aa22b6
sayma: set up Si5324 for RGMII clock rerouting
2017-12-17 00:25:33 +08:00
f02c74cb7b
libboard/si5324: enable both clock outputs
2017-12-15 16:56:44 +08:00
9caef3c1d3
libboard/si5324: configure I2C mux on Sayma
2017-12-15 16:45:26 +08:00
77977932f2
firmware: remove AD9516 support
...
This was only used in KC705 phaser.
2017-12-14 19:16:39 +08:00
5809e08686
runtime: no startup_clock config is not an error
2017-12-14 12:39:26 +08:00
whitequark
9e8bb1d51c
runtime: update smoltcp.
2017-12-08 07:36:56 +00:00
