forked from M-Labs/artiq
1
0
Fork 0

firmware/hmc830_7043: break out HMC830 SPI mode selection

This commit is contained in:
Sebastien Bourdeauducq 2018-05-16 22:46:14 +08:00
parent 0aadd3a361
commit 1364cd2948
1 changed files with 11 additions and 5 deletions

View File

@ -52,8 +52,6 @@ mod hmc830 {
fn spi_setup() {
unsafe {
while csr::converter_spi::idle_read() == 0 {}
// rising egde on CS since cs_polarity still 0
// selects "HMC Mode"
csr::converter_spi::offline_write(0);
csr::converter_spi::end_write(1);
csr::converter_spi::cs_polarity_write(0b0001);
@ -61,14 +59,21 @@ mod hmc830 {
csr::converter_spi::clk_phase_write(0);
csr::converter_spi::lsb_first_write(0);
csr::converter_spi::half_duplex_write(0);
csr::converter_spi::length_write(32 - 1);
csr::converter_spi::div_write(16 - 2);
csr::converter_spi::cs_write(1 << csr::CONFIG_CONVERTER_SPI_HMC830_CS);
}
}
pub fn select_spi_mode() {
spi_setup();
unsafe {
// rising egde on CS since cs_polarity still 0
// selects "HMC Mode"
// do a dummy cycle with cs still high to clear CS
csr::converter_spi::length_write(0);
csr::converter_spi::data_write(0);
while csr::converter_spi::writable_read() == 0 {}
csr::converter_spi::length_write(32 - 1);
}
}
@ -111,7 +116,7 @@ mod hmc830 {
for &(addr, data) in HMC830_WRITES.iter() {
write(addr, data);
}
info("...done");
info!("...done");
let t = clock::get_ms();
info!("waiting for lock...");
@ -295,7 +300,8 @@ pub mod hmc7043 {
pub fn init() -> Result<(), &'static str> {
clock_mux::init();
/* must be the first SPI init because of HMC830 SPI mode selection */
/* do not use other SPI devices before HMC830 SPI mode selection */
hmc830::select_spi_mode();
hmc830::detect()?;
hmc7043::detect()?;
hmc7043::shutdown()?;