forked from M-Labs/artiq
1
0
Fork 0

hmc7043: align SYSREF with RTIO

This commit is contained in:
Sebastien Bourdeauducq 2018-06-21 15:54:30 +08:00
parent 9741654cad
commit 05e908a0fd
2 changed files with 71 additions and 2 deletions

View File

@ -770,6 +770,12 @@ pub fn init() {
// set up clock chips before.
jesd_unreset();
// This needs to take place once before DAC SYSREF scan, as
// the HMC7043 input clock (which defines slip resolution)
// is 2x the DAC clock, so there are two possible phases from
// the divider states. This deterministically selects one.
hmc7043::sysref_rtio_align();
for dacno in 0..csr::AD9154.len() {
match init_dac(dacno as u8) {
Ok(_) => (),

View File

@ -283,11 +283,12 @@ pub mod hmc7043 {
let (enabled, divider, outcfg) = OUTPUT_CONFIG[channel];
if enabled {
// Only clock channels need to be high-performance
if channel % 2 == 0 {
// DCLK channel: enable high-performance mode
write(channel_base, 0xd1);
} else {
write(channel_base, 0x51);
// SYSREF channel: disable hi-perf mode, enable slip
write(channel_base, 0x71);
}
} else {
write(channel_base, 0x10);
@ -336,6 +337,68 @@ pub mod hmc7043 {
}
}
fn cfg_fpga_sysref(phase: u16) {
let analog_delay = (phase % 17) as u8;
let digital_delay = (phase / 17) as u8;
spi_setup();
write(0x0111, analog_delay);
write(0x0112, digital_delay);
}
fn sysref_slip() {
spi_setup();
write(0x0002, 0x02);
write(0x0002, 0x00);
}
fn sysref_sample() -> bool {
unsafe { csr::sysref_sampler::sample_result_read() == 1 }
}
pub fn sysref_rtio_align() {
info!("aligning SYSREF with RTIO...");
let phase_offset = 44;
let mut slips0 = 0;
let mut slips1 = 0;
// meet setup/hold (assuming FPGA timing margins are OK)
cfg_fpga_sysref(phase_offset);
// if we are already in the 1 zone, get out of it
while sysref_sample() {
sysref_slip();
slips0 += 1;
}
// get to the edge of the 0->1 transition (our final setpoint)
while !sysref_sample() {
sysref_slip();
slips1 += 1;
}
info!(" ...done ({}/{} slips), verifying timing margin", slips0, slips1);
let mut margin = None;
for d in 0..phase_offset {
cfg_fpga_sysref(phase_offset - d);
if !sysref_sample() {
margin = Some(d);
break;
}
}
// meet setup/hold
cfg_fpga_sysref(phase_offset);
if margin.is_some() {
let margin = margin.unwrap();
info!(" margin at FPGA: {}", margin);
if margin < 10 {
error!("SYSREF margin at FPGA is too small");
}
} else {
error!("unable to determine SYSREF margin at FPGA");
}
}
}
pub fn init() -> Result<(), &'static str> {