66b3132c28
sayma_amc: fix RTIO TSC instantiation
2019-01-06 14:54:32 +08:00
6e43c41103
firmware: support building without SDRAM
2019-01-05 23:41:30 +08:00
cf9447ab77
rtio/cri: remove unneeded CSR management
2019-01-05 23:40:45 +08:00
2c3510497b
firmware: fix not(has_spiflash) build
2019-01-05 23:40:03 +08:00
2100a8b1f1
sayma_amc: more fighting with vivado timing analyzer
2019-01-05 12:25:30 +08:00
Drew Risinger
b58d59a9e7
pyon: fix grammar in module docstring.
...
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-04 19:31:08 +00:00
a93fdb8c9d
drtio: disable all destinations in gateware at startup
...
Otherwise, kernels fail to get a RTIODestinationUnreachable exception when attempting
to reach a DRTIO destination that has never been up.
2019-01-04 23:42:12 +08:00
62d7c89c48
sayma_amc: use high-resolution TTL on SMAs ( #792 )
2019-01-03 20:50:38 +08:00
0972d61e81
ttl_serdes_ultrascale: use GTH clock domains
2019-01-03 20:50:04 +08:00
f007895fad
drtio/gth_ultrascale: fix rtiox clock domain
2019-01-03 20:49:38 +08:00
10ebf63c47
jesd204_tools: get the Vivado timing analyzer to behave
2019-01-03 20:22:35 +08:00
d6a3172a3e
update copyright year
2019-01-03 20:21:34 +08:00
4af8fd6a0d
ttl_serdes_ultrascale: fix Input
2019-01-03 20:14:54 +08:00
175f8b8ccc
drtio/gth_ultrascale: generate multiplied RTIO clock from BUFG_GT ( #792 )
2019-01-03 20:14:18 +08:00
77126ce5b3
kasli: use hwrev 1.1 by default for DRTIO examples
2019-01-02 23:04:20 +08:00
ab9ca0ee0a
kasli: use 150MHz for DRTIO by default (Sayma compatibility)
2019-01-02 23:03:57 +08:00
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
f5cda3689e
sayma_amc: enable DRTIO on master SATA connector for MasterDAC variant
2019-01-02 16:46:16 +08:00
Drew
d60b95f481
tdr.py: typo ( #1220 )
2018-12-18 18:47:09 +00:00
a7d4d3bda9
ad9910: CONT_RECIRCULATE -> CONT_RAMPUP
2018-12-17 13:25:00 +00:00
35bdf26f01
Merge branch 'ad9910-ram'
2018-12-17 21:16:44 +08:00
David Nadlinger
e608d6ffd3
coredevice, firmware: Add rtio_input_timestamped_data
...
Integration tests to follow as part of an RTIO counter phy that
makes use of this.
2018-12-15 00:35:04 +00:00
David Nadlinger
8e30c4574b
firmware: Treat timestamps consistently as signed [nfc]
...
This matches other functions and the ARTIQ Python side, but
isn't actually an ABI change.
2018-12-15 00:02:18 +00:00
38ce7ab8ff
sync_struct: handle TimeoutError as subscriber disconnection. Closes #1215
2018-12-13 06:58:54 +08:00
79eadb9465
ad9910: add RAM mode methods
...
* also refactor the CFR1 access into a method
c.f. #1154
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-11 14:54:16 +00:00
6df4ae934f
eem: name the servo submodule
...
This allows the migen namer to derive names for the ADC return clock
domain in the case of multiple SUServos
close #1201
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-11 11:36:40 +01:00
efd400b02c
ad9910: style [nfc]
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-11 11:36:25 +01:00
David Nadlinger
d4c393b2a8
firmware/ksupport: Update cfg(not(has_rtio)) stub signatures
...
This fixes up 8caea0e6d3
2018-12-11 01:22:48 +00:00
d90eb3ae88
ad9910: add read64()
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-07 21:27:00 +00:00
baf88050fd
urukul: expand attenuator HITL unittests
...
* read back with cleared backing state
* individual channel settings
* check backing state
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-12-07 21:06:12 +00:00
Kaifeng
cc143d5fec
kasli_tester: add support for windows platform. ( #1204 )
2018-12-05 14:06:45 +01:00
6aa341bc44
test_loopback_gate_timing: fix lat_offset
2018-12-02 20:52:32 +08:00
421834fa3e
compiler: document Target.little_endian
2018-12-02 19:07:18 +08:00
981a77834a
compiler: use default triple to determine data_layout for JIT
2018-12-02 18:52:13 +08:00
d931967e5c
fix previous commits
2018-12-02 18:32:03 +08:00
dd03fdfd1a
typo
2018-12-02 18:26:54 +08:00
8940009e1a
compiler: pass data_layout string to llvm.create_target_data before determining endianness
2018-12-02 18:26:19 +08:00
2e66788c6c
compiler: support little endian target when storing now
2018-12-02 17:40:34 +08:00
7e14f3ca4e
compiler,gateware: atomic now stores
2018-12-02 05:06:46 +08:00
fd00021a52
ctlmgr: do not raise exceptions in Controllers.__setitem__. Closes #1198
2018-12-01 18:09:58 +08:00
7f55376c75
test_loopback_gate_timing: print input timing for debugging
2018-12-01 18:09:53 +08:00
dce4f036db
grabber: work around windows numpy int peculiarity (same as a81c12de9)
2018-11-30 18:41:14 +08:00
156afb48ee
language: fix syscall arg handling
2018-11-30 17:59:24 +08:00
Paweł K
57caa7b149
artiq_flash: add command to erase flash memory ( #1197 )
2018-11-28 12:33:32 +02:00
c56c0ba41f
rtio/dds: use write-only RT2WB
...
This saves one address bit and prevents issues with AD9914 and 8-bit addresses.
2018-11-26 07:38:15 +08:00
09141e5bee
rtio/wishbone: support write-only interface
2018-11-26 07:38:06 +08:00
450a035f9e
suservo: move overflowing RTIO address bits into data
2018-11-26 06:54:20 +08:00
ae8ef18f47
rtlink: sanity-check parameters
2018-11-26 01:14:02 +08:00
b32e89444c
Merge branch 'master' into new
2018-11-26 01:02:19 +08:00
af9ea1f324
gui: update background
2018-11-26 01:01:36 +08:00
a81c12de94
urukul: work around windows numpy int peculiarity
...
"OverflowError: Python int too large to convert to C long" otherwise
opticlock#74
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-25 16:56:45 +01:00
8f9858be4c
ad9914: remove automatic continuous phase compensation (like Urukul)
2018-11-19 22:00:20 +08:00
22a223bf82
examples/master: clean up remnants of early urukul tests
2018-11-19 21:42:41 +08:00
53e79f553f
Merge branch 'master' into new
2018-11-19 11:54:50 +08:00
a3e0b1c5b4
ad9914,spi2: add warnings about driver state and DMA. Closes #1113
2018-11-17 22:10:20 +08:00
78d4b3a7da
gateware/targets: expose variant lists
...
This allows writing scripts that build all variants.
2018-11-17 22:10:20 +08:00
69e699c7bd
ttl: compensate for SED latency in input gating
...
Closes #1137
2018-11-17 22:10:20 +08:00
3ad68f65c5
urukul: make get_att_mu() not alter state
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-16 14:56:26 +00:00
d1eee7c0ea
ad9910: ensure sync is driven when required
...
close #1194
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-16 13:21:01 +00:00
1b841805f6
Merge branch 'master' into new
2018-11-16 15:20:32 +08:00
d3483c1d26
kasli: fix SDRAM read delay reset/wrap issue. Closes #1149
2018-11-15 19:40:35 +08:00
494ffca4d3
gui,scan: add CenterScan Scannable variant
...
* parametrized by center/span/step instead of
start/stop/npoints which is more convenient in some applications
* no scan widget support so far
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-15 13:30:43 +08:00
f77a75ab17
test_ad9910: robustify w.r.t. profile synchronization
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 08:42:27 +01:00
c3178c2cab
ad9910: profile support
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 08:30:28 +01:00
d0cadfeb4b
ad9910: more idiomatic register names
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 07:55:01 +01:00
a52d1be140
urukul: expose PROFILE setting
...
* add documentation
* add unittest
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-14 07:43:56 +01:00
2af6edb8f5
eem: fix reset/sync in suservo
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-13 13:00:54 +00:00
whitequark
248c1cf7dc
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-13 00:58:20 +08:00
whitequark
68aad3e482
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-13 00:57:09 +08:00
whitequark
dd829afebd
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-12 15:42:07 +00:00
whitequark
583bba8777
Revert "firmware: workaround for RPC failures"
...
This reverts commit 59033d2588
2018-11-12 15:36:36 +00:00
whitequark
0edae64afb
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-12 15:30:59 +00:00
59033d2588
firmware: workaround for RPC failures
2018-11-12 19:51:54 +08:00
84a6b3d09b
runtime: fix DMA recording after now-pinning
2018-11-10 14:14:55 +08:00
a4997c56cf
ad9910: simplify edge detection logic
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 18:54:34 +00:00
14b6b63916
ad9910: rewire io_delay tuning
...
This now reliably locates the SYNC_CLK-IO_UPDATE edge by doing two
scans at different delays between start and stop IO_UPDATE.
It also works well when one delay is very close to the edge.
And it correctly identifies which (start or stop) pulse hit or crossed
the SYNC_CLK edge.
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 18:38:27 +00:00
1f7858b80b
test/dsp: fix rtio_output
2018-11-09 22:11:44 +08:00
e509ab8553
test/dsp: use absolute import path
...
Avoids "ImportError: attempted relative import with no known parent package"
when doing a simple "python -m unittest test_XXX.py".
2018-11-09 22:10:46 +08:00
38c6878d49
urukul: mention min/max attenuation
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 13:32:05 +01:00
e565ca6b82
urukul: slow down att write to datasheet limit
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 13:23:06 +01:00
998be50f07
urukul: handle MSB in att_reg
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-09 13:21:14 +01:00
c990b5e4f1
Merge remote-tracking branch 'origin/master' into new
2018-11-08 20:21:56 +08:00
a0cc7311ad
test: tighten test_pulse_rate
2018-11-08 20:17:55 +08:00
0bee43aa58
sawg: use new rtio_output() API
2018-11-08 20:16:30 +08:00
bec25cbaa0
suservo: use new rtio_output() API
2018-11-08 20:13:14 +08:00
e8d58b35b4
spi2: use new rtio_output() API
2018-11-08 20:12:30 +08:00
d18546550e
grabber: use new rtio_output() API
2018-11-08 19:15:50 +08:00
2549e623c1
ad9914: use new rtio_output() API
2018-11-08 19:15:44 +08:00
David Nadlinger
9740032a94
firmware: Fix dma_record_output_wide
2018-11-08 11:06:43 +00:00
f74dda639f
drtio: 8-bit address
2018-11-08 18:36:20 +08:00
8caea0e6d3
gateware,runtime: optimize RTIO kernel interface further
...
* now pinning (TODO: atomicity)
* for inputs, merge request and timeout registers
2018-11-08 18:29:24 +08:00
fcb611d1d2
test_ad9910: don't expect large SYNC_IN delay margins
...
sinara-hw/Urukul#16
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-07 18:18:35 +01:00
aadf5112b7
rtio: remove incorrect comment
2018-11-08 00:02:44 +08:00
fae95e73ad
ttl: use optimized rtio_output API
2018-11-07 23:41:43 +08:00
3d0c3cc1cf
gateware,runtime: optimize RTIO output interface
...
* reduce address to 8 bits
* merge core, channel and address into 32-bit pre-computable "target"
* merge we register into data register
2018-11-07 23:39:58 +08:00
e6efe830c4
ad9910: rewire sync delay tuning
...
* search from wide window end
* decouple margins and minimum window size
* add note about kasli jitter
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-07 14:52:03 +00:00
ad0254c17b
Merge branch 'switching125' into new
2018-11-07 22:03:18 +08:00
efd735a6ab
Revert "drtio: monitor RTIOClockMultiplier PLL ( #1155 )"
...
This reverts commit 469a66db61
2018-11-07 22:01:03 +08:00
6c00ab57c0
test_ad9910: relax SYNC window
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 19:31:38 +01:00
172633c7da
test_ad9910: default to a useful seed
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 17:35:57 +01:00
0b2661a34d
ad9910: robustify SYNC window finding
...
don't integrate too long, find the window tip fast and early
a couple 100 SYNC pulses are sufficient
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 12:41:21 +00:00
ba4bf6e59b
kasli: don't pass rtio pll feedback through bufg
...
UG472: "The MMCM performance increases because the
feedback clock is not subjected to noise on the core supply since it
never passes through a block powered by this supply."
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 11:58:55 +00:00
b6e4961b0f
kasli: lower RTIO clock jitter
...
* high bandwidth since the si5324 is good
* no low power ibufgds
* drop bufg between ibufgds and pll
* increase pll vco frequency to 1.5 GHz
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 11:43:19 +00:00
e17e458c58
ptb2: add sync to urukul0 for ad9910 usage
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 10:06:51 +00:00
73b7124091
test_ad9910: print sync scan for debugging
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 10:04:21 +01:00
9a3d81ffee
kasli: fix tester clk_sel
2018-11-06 14:49:21 +08:00
fb12df7e01
Revert "kasli_tester: urukul0 mmcx clock defunct"
...
This reverts commit 68220c316d
2018-11-06 14:33:21 +08:00
31f68ddf6c
Merge branch 'urukul-sync'
...
* urukul-sync: (29 commits)
urukul: flake8 [nfc]
ad9910: flake8 [nfc]
urukul/ad9910 test: remove unused import
test_urukul: relax speed
urukul,ad9910: print speed metrics
kasli: add PTB2 (external clock and SYNC)
kasli: add sync to LUH, HUB, Opticlock
kasli_tester: urukul0 mmcx clock defunct
test_ad9910: relax ifc mode read
tests: add Urukul-AD9910 HITL unittests including SYNC
ad9910: add init bit explanation
test: add Urukul CPLD HITL tests
ad9910: fiducial timestamp for tracking phase mode
ad9910: add phase modes
ad9910: fix pll timeout loop
tester: add urukul sync
ptb: back out urukul-sync
ad9910: add IO_UPDATE alignment and tuning
urukul: set up sync_in generator
ad9910: add io_update alignment measurement
...
close #1143
2018-11-05 19:54:30 +01:00
6fb18270a2
urukul: flake8 [nfc]
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:45:24 +01:00
832690af9a
ad9910: flake8 [nfc]
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:44:51 +01:00
6d525e2f9a
urukul/ad9910 test: remove unused import
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:40:57 +01:00
36c5a7cd04
test_urukul: relax speed
...
works fine at < 3µs here but needs <5 µs on buildbot-kasli-tester
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:20 +01:00
89fecfab50
urukul,ad9910: print speed metrics
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:18 +01:00
32d538f72b
kasli: add PTB2 (external clock and SYNC)
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:16 +01:00
d8a5951a13
kasli: add sync to LUH, HUB, Opticlock
...
for #1143 , also add missing LUH device db
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:14 +01:00
68220c316d
kasli_tester: urukul0 mmcx clock defunct
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:11 +01:00
89fadab63d
test_ad9910: relax ifc mode read
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:08 +01:00
f522e211ba
tests: add Urukul-AD9910 HITL unittests including SYNC
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:06 +01:00
9fb850ae75
ad9910: add init bit explanation
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:02 +01:00
bc04da15c5
test: add Urukul CPLD HITL tests
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:00 +01:00
141cc7d99f
ad9910: fiducial timestamp for tracking phase mode
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:58 +01:00
2f6d3f79ff
ad9910: add phase modes
...
* simplified and cross-referenced the explanation of the different
phase modes.
* semantically and functionally merged absolute and tracking/coherent
phase modes.
* simplified numerics to calculate phase correction
* added warning about possible inconsistency with DMA and default
phase mode
* restricted __all__ imports
* moved continuous/relative phase offset tracking from an instance
variable to a "handle" returned by set()/set_mu() in order to avoid
state inconsistency with DMA (#1113 #1115 )
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:55 +01:00
d3ad2b7633
ad9910: fix pll timeout loop
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:53 +01:00
4269d5ad5c
tester: add urukul sync
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:52 +01:00
60d3bc63a7
ptb: back out urukul-sync
...
... for backwards compatibility.
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:50 +01:00
06139c0f4d
ad9910: add IO_UPDATE alignment and tuning
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:48 +01:00
1066430fa8
urukul: set up sync_in generator
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:46 +01:00
4bbd833cfe
ad9910: add io_update alignment measurement
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:44 +01:00
7b92282012
ad9910: add docs for sync tuning, refactor
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:42 +01:00
8a47a6b2fb
ad9910: disable sync_clk output
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:40 +01:00
65e2ebf960
ad9910: add sync delay control, auto tuning
...
* expose multi device sync functionality
* sync delay configuration interface
* auto-tuning of sync delay from device_db seed
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:37 +01:00
8dbf5f87fd
ad9910: simplify io_update pulsing on init, set_mu
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:35 +01:00
0b3b07a7da
ad9910: add power down method
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:34 +01:00
3538444876
urukul: add sync_in to eem0-7 name
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:32 +01:00
0433e8f4fe
urukul: add sync_in generator
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:30 +01:00
f62c1ff0bb
TTLClockGen: expose acc_width
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:27 +01:00
f755a4682a
device_db_ptb: fix zotino clr
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:24 +01:00
David Nadlinger
f79b9d9e1e
ttl: Expand input gate/count API docstrings
2018-11-03 20:33:19 +08:00
David Nadlinger
f02ceee626
language: Clarify now_mu() docstring [nfc]
2018-11-03 20:33:19 +08:00
David Nadlinger
5d2e3f975f
coredevice: Add get_rtio_counter_mu() docstring [nfc]
2018-11-03 20:33:19 +08:00
David Nadlinger
d6fcc0529f
coredevice: Imperative mood in docstrings [nfc]
...
This follows Python conventions (PEP257) and unifies the style with
other comments.
2018-11-03 20:33:19 +08:00
David Nadlinger
cbdef0225c
ttl: Add target RTIO time argument to timestamp/count functions
...
Software-based tracking of timestamps is problematic (e.g. when
using DMA, see GitHub #1113 ).
2018-11-03 20:33:19 +08:00
David Nadlinger
2a0e1dabfb
ttl: Remove unused attribute [nfc]
2018-11-03 20:33:19 +08:00
David Nadlinger
17a5fb2dce
ttl: Remove error-prone sync() calls
...
These methods are problematic, as with DMA in the picture, the
timestamp member variables did not necessarily reflect the last
submitted event timestamp (see GitHub #1113 ).
sync() is only very rarely used in typical experimental code, so
the methods are removed without a transition period.
Core.wait_until() can be used to busy-wait for a specified RTIO
timestamp value on the core device CPU instead.
2018-11-03 20:33:19 +08:00
David Nadlinger
11e8c9d5f7
coredevice: Add Core.wait_until_mu()
...
(This supersedes TTLOut.sync(), see see GitHub #1113.)
2018-11-03 20:33:19 +08:00
David Nadlinger
cbfbe24d7a
ttl: Remove broken TTLClockGen.sync
...
The code currently doesn't compile because of a typo in the timestamp
field name. However, tracking event timestamps in software is
problematic anyway (e.g. with DMA, see GitHub #1113 ), so just remove
`sync()` altogether.
2018-11-03 20:33:19 +08:00
bc4a8157c0
kasli: add tsinghua2
2018-11-01 18:26:37 +08:00
89a961fb00
urukul, ad9912, ad9910: expose CFG RF switch better
...
* conincident setting of multiple switches
* per channel setting
2018-10-24 13:04:46 +02:00
48a142ed63
use FutureWarning instead of DeprecationWarning
...
DeprecationWarning is disabled by default and too easy to ignore.
2018-10-21 12:14:51 +08:00
9793632282
enviromnment: rename 'save' in set_dataset to 'archive'. Closes #1171
2018-10-21 12:08:34 +08:00
Marius Weber
029f9d983a
Tpz fixes ( #1178 )
...
* flake8
* fix TPZ constructor after move to asyncio
* Tcube fix docummentation in set_channel_enable_state
2018-10-20 20:49:15 +08:00
c52a6ca8e9
typo ( #1179 )
2018-10-20 20:40:07 +08:00
Florent Kermarrec
3318925f4e
firmware/liboard_misoc/sdram: use similar loops on read_level_scan and read_level for consistent results
2018-10-16 09:40:39 +02:00
6357a50d33
kasli: update nudt variant
2018-10-15 18:04:57 +08:00
David Nadlinger
e3cfbfed06
master: Add minimal docstring to worker_impl [nfc]
2018-10-14 10:41:32 +08:00
David Nadlinger
64b9a377da
master: Factor RIDCounter out into own module, explain worker_db module [nfc]
...
The docstrings are quite minimal still, but should already
help with navigating the different layers when getting
accustomed with the code base.
RIDCounter was moved to its own module, as it isn't really
related to the other classes (used from master only).
2018-10-14 10:41:32 +08:00
David Nadlinger
4641ddf002
master: Remove unused import [nfc]
2018-10-14 10:41:32 +08:00
661dd00c4c
ad9912: phase offset is 14 bit LSB aligned
...
c.f. sinara-hw/Urukul#15
2018-10-11 15:16:08 +02:00
hartytp
08074d5275
Urukul: add support for hardware v1.3 clocking options
2018-10-10 09:26:35 +02:00
469a66db61
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-10-08 14:50:02 +02:00
hartytp
1a1b454ed9
Urukul: flake8 (NFC)
2018-10-08 10:09:49 +01:00
5de319d76a
bit2bin: don't print string terminator
2018-10-08 10:13:03 +02:00
hartytp
9a509e5070
Zotino: increase delay after register read in init method to avoid underflows
2018-10-06 21:45:17 +08:00
86fe6b0594
kasli: add NUDT variant
2018-10-04 23:20:09 +08:00
a89bd6b684
kasli: swap Urukul EEMs for Tester
...
Updated to Urukul 1.3.
2018-10-04 23:19:31 +08:00
9f96b6bcda
kasli: use 125MHz DRTIO freq for testing
2018-10-04 10:41:01 +08:00
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
d0ee2c2955
opticlock: external 100 MHz
2018-09-28 19:05:18 +02:00
3b3fddb5a4
kasli: add mitll2
2018-09-27 23:21:52 +08:00
998a468983
examples: add grabber to device databases
2018-09-27 16:09:25 +08:00
c71e442929
documentation improvements
...
Based on PR #1101 by @drewrisinger
2018-09-26 12:12:37 +08:00
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
53c7a5f2c6
dashboard: fix TTL moninj level display
2018-09-26 10:32:08 +08:00
212892d92f
style
2018-09-26 10:13:33 +08:00
20cddb6a25
tester: handle no available ttl outputs
2018-09-24 09:19:28 +00:00
73f0de7c79
sayma: DRTIO master fixes
2018-09-20 11:15:45 +08:00
1b7f403a4b
drtio: remove remote RTIO PHY resets
2018-09-20 11:10:32 +08:00
53a979e74d
rtio: cleanup resets
2018-09-20 10:58:38 +08:00
251d90c3d5
drtio: clear read request in satellite only after reply has been fully sent
...
Otherwise, chan_sel become invalid before the end of the packet, which
can cause the interconnect to invalidate i_timestamp and i_data which results
in corruption of the end of the packet.
2018-09-20 08:53:45 +08:00
69d060b639
drtio: fix satellite i_status handling
2018-09-19 20:57:21 +08:00
b86b6dcc09
drtio: add switching input test
2018-09-19 17:50:29 +08:00
08be176369
drtio: fix satellite i_status handling
2018-09-19 17:50:18 +08:00
3d965910f7
Revert "drtio: implement per-destination underflow margins"
...
This reverts commit 142c952e3d
2018-09-19 17:05:48 +08:00
142c952e3d
drtio: implement per-destination underflow margins
2018-09-19 17:03:15 +08:00
62642957cd
runtime: fix DRTIO aux channel race condition
2018-09-19 11:16:21 +08:00
David Nadlinger
b482f5feae
firmware: Use larger ARP cache
...
This works around a problematic interaction between ARP cache
expiry in smoltcp (with its 3 seconds timeout before a discovery
request is sent) and our TCP keepalive settings, where the timeout
is reached before the keepalive had a chance to be sent.
GitHub: Closes #1150 .
2018-09-18 14:46:52 +00:00
970d1bf147
drtio: add switching unittest
2018-09-18 15:27:52 +08:00
eda15a596c
drtio: add buffering to repeater
2018-09-18 15:27:25 +08:00
2b44786f73
drtio: add repeater input support
2018-09-17 23:45:27 +08:00
whitequark
c33f74dabe
firmware: derive Clone for Mutex.
2018-09-15 15:24:44 +00:00
c8cd830118
drtio: implement get_rtio_destination_status for kernels
2018-09-15 19:11:22 +08:00
f7ad7a99e3
firmware: set DEST_COUNT to 0 without routing
2018-09-15 19:10:52 +08:00
3cbdf2fbac
kasli: cleanup drtio blink example
2018-09-15 18:43:27 +08:00
d38755feff
drtio: implement destination state checks on operations
2018-09-15 15:55:45 +08:00
whitequark
1990ab35d3
firmware: implement mutexes.
2018-09-15 07:35:35 +00:00
cd61ee858c
kasli: fix satellite TSC instantiation
2018-09-15 14:06:54 +08:00
7565d816e4
frontend: remove artiq_pcap. Closes #1152
2018-09-15 12:09:37 +08:00
eaeab0c9bd
frontend: add artiq_rtiomon
2018-09-15 12:09:32 +08:00
c0c413196a
frontend: remove artiq_pcap. Closes #1152
2018-09-15 12:08:06 +08:00
f097b4104c
satman: not(has_drtio_routing) fixes
2018-09-15 12:06:47 +08:00
0017cb756e
frontend: add artiq_rtiomon
2018-09-15 10:44:59 +08:00
2f010e0109
runtime: improve moninj aux error logging
2018-09-15 10:44:41 +08:00
20ed393c1e
style
2018-09-15 10:43:50 +08:00
f8c6fa5ad6
typo
2018-09-15 10:43:36 +08:00
65da1fee4a
firmware: fix build without DRTIO
2018-09-14 20:38:41 +08:00
d19550daf8
firmware: simplify drtioaux function names
2018-09-14 20:32:09 +08:00
ae72e3a51e
firmware: add support for moninj and kern_hwreq over DRTIO switching
2018-09-14 20:26:39 +08:00
1ef39a98a7
drtio: implement per-destination buffer space
2018-09-13 16:16:32 +08:00
e95638e0a7
style
2018-09-13 15:54:28 +08:00
042b0065de
runtime: print destination up message for local RTIO
2018-09-13 14:10:52 +08:00
fa872c3341
firmware: implement DRTIO destination survey
2018-09-13 12:00:29 +08:00
6cf3db3485
satman: forward RTIO resets
2018-09-12 23:02:54 +08:00
5a9cc004f2
drtio: receive and print unsolicited aux packets
...
Helps with debugging and prevents the aux channel from getting stuck after packets arrive after the timeout.
2018-09-12 22:57:21 +08:00
0befec7d26
drtio: improve repeater error reports
2018-09-12 20:54:01 +08:00
420e1cb1d0
cri: fix firmware routing table access
2018-09-12 18:08:16 +08:00
e36a8536d7
runtime: better handling of aux timeouts
2018-09-12 17:31:23 +08:00
5bcd40ff59
cri: fix routing table depth
2018-09-12 17:30:55 +08:00
edf403b837
drtio: improve error reporting
2018-09-12 15:44:34 +08:00
95432a4ac1
drtio: remove old debugging features
2018-09-12 13:01:27 +08:00
8227037a84
examples: add kasli_drtioswitching
2018-09-11 22:20:18 +08:00
41972d6773
drtio: rt_packet_satellite CRI fixes
2018-09-11 22:19:55 +08:00
051bafbfd9
drtio: ensure 2 cycles between frames on the link
...
This gives time for setting chan_sel before cmd on CRI.
2018-09-11 22:18:42 +08:00
251b9a2b0d
drtio: do not lock up master when satellite repeatedly fails to answer buffer space reqs
2018-09-11 22:17:57 +08:00
5439abaa9d
satman: fix error messages
2018-09-11 20:10:52 +08:00
36e3fedfc6
runtime: print routing table at boot
2018-09-11 20:10:33 +08:00
e6bd835b5d
satman: fix rank setting
2018-09-11 20:04:51 +08:00
2679a35082
firwmare: propagate DRTIO routing table and rank all the way
2018-09-11 18:28:17 +08:00
c0c5867f9e
satman: increase stack size
...
Prevents crashing when running the routing code.
Will have to be shrunk back on Sayma RTM.
2018-09-11 18:23:51 +08:00
a23af67f2b
satman: print better debugging information on exception
2018-09-11 18:23:36 +08:00
f5b386c0d8
firmware: fix routing table formatting
2018-09-11 18:22:45 +08:00
b38c57d73b
firmware: send DRTIO routing table to satellite
2018-09-11 14:12:41 +08:00
3d29a7ed14
firmware: add fmt::Display to RoutingTable
2018-09-11 11:27:56 +08:00
2fff96802b
runtime: remove support for building without RTIO
2018-09-10 23:09:02 +08:00
19a14b68b1
runtime: program DRTIO routing table into gateware
2018-09-10 22:48:56 +08:00
264078baba
style
2018-09-10 22:29:35 +08:00
e01efbcb8a
runtime: merge sync_tsc and wait_tsc_ack
2018-09-10 22:17:00 +08:00
4d889c0c4e
firmware: improve DRTIO log messages
2018-09-10 21:40:02 +08:00
663432adbd
satman: load TSCs of downstream devices
2018-09-10 20:34:33 +08:00
bc1d3fda6a
satman: ping repeater links
...
Tested OK on hardware.
2018-09-10 20:17:13 +08:00
31bef9918e
firmware: fix drtio_routing compatibility with master and satellite
2018-09-10 20:16:42 +08:00
7ec45efdcf
kasli: add missing cri_con to Satellite
2018-09-10 20:16:09 +08:00
014cfd8dbd
firmware: add drtioaux routing packets
2018-09-09 22:44:25 +08:00
7ae44f3417
firmware: add routing table (WIP)
2018-09-09 21:49:28 +08:00
496d1b08fd
kasli: enable routing in Master
2018-09-09 21:48:12 +08:00
ec302747e0
kasli: add DRTIO repeaters
2018-09-09 16:27:39 +08:00
d5577ec0d0
cri: add routing table support
2018-09-09 16:26:48 +08:00
df61b85988
drtio: fix imports
2018-09-09 14:11:32 +08:00
312256a18d
grabber: fix frame size off-by-1
2018-09-07 16:55:43 +02:00
ec62eb9373
drtio: minor cleanup
2018-09-07 17:51:38 +08:00
4d73fb5bc9
grabber: only advance when DVAL
2018-09-06 11:01:08 +02:00
