9ad1fd8f25
urukul: add comment and doc about the AD9910 MASTER_RESET
2018-03-20 17:40:03 +01:00
f17c0abfe4
urukul: don't pulse DDS_RST on init
...
closes m-labs/artiq#940
Apparently, if the DDS are reset, every other time they don't work
properly.
2018-03-20 16:10:26 +00:00
a185e8dc52
urukul: fix MASK_NU offset
2018-03-20 16:10:11 +00:00
hartytp
a27b5d88c2
Novogorny driver, remove unused imports ( #964 )
...
* Novogorny driver, remove unused imports
* more unused imports
* oops, one final one!
2018-03-19 11:58:14 +01:00
f39b7b33e8
ad5360: whitespace [nfc]
2018-03-17 18:51:17 +01:00
ion
c1439bfd3b
Fix AD5360 after migration to SPI2
2018-03-17 11:37:11 +00:00
a04bd5a4fd
spi2: xfers take one more cycle until ~busy
2018-03-09 20:48:17 +01:00
37ec97eb28
ad9910/2: add sw invariant only when passed
2018-03-07 21:32:59 +01:00
f4dad87fd9
coredevice: add pcf8574a driver
...
I2C IO expander with 8 quasi-bidirectional pins
2018-03-06 14:27:19 +01:00
432e61bbb4
drtio: add kernel API to check for link status. Closes #941
2018-03-05 00:23:55 +08:00
928d5dc9b3
drtio: raise RTIOLinkError if operation fails due to link lost ( #942 )
2018-03-04 01:02:53 +08:00
abfbadebb5
doc: DMA can also raise RTIOUnderflow
2018-03-03 13:14:34 +08:00
cc70578f1f
remove old spi RTIO Phy
2018-03-01 11:19:18 +01:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
5046d6a529
ad9912/10: add a bit more slack to init()
2018-02-27 23:14:44 +01:00
b466a569bf
coredevice: export spi2
2018-02-24 09:49:31 +01:00
cff85ee13b
novogorny: simplify and fix coefficient
2018-02-23 10:09:44 +01:00
bc5e949bb4
novogorny: fix gain register length
2018-02-22 18:45:55 +00:00
1452cd7447
novogorny: add coredevice driver and test with Kasli
...
m-labs/artiq#687
2018-02-22 17:19:51 +01:00
74517107f0
ad9912: add slack after prodid read
2018-02-22 17:19:51 +01:00
e8d4db1ccf
coreanalyzer: add spi2 support
...
m-labs/artiq#926
2018-02-22 11:28:46 +01:00
f8e6b4f4e3
ad5360: port to spi2
...
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db
This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1
m-labs/artiq#926
2018-02-22 10:25:46 +01:00
898bad5abc
spi2: fixes
2018-02-21 19:41:05 +01:00
a63fd306af
urukul: use spi2
...
* switch kc705 and kasli targets to spi2 gateware on urukul
* rewrite urukul, ad9912, ad9910
* update example experiments, device_dbs
2018-02-21 15:00:28 +00:00
37a0d6580b
spi2: add RTIO gateware and coredevice driver
...
1006218997
2018-02-21 13:37:36 +00:00
4b4090518b
drtio: clean up remnants of removed debug functions
2018-02-19 15:14:32 +08:00
caedcd5a15
ad9912: cleanup, document init()
2018-02-18 11:38:16 +01:00
75c89422c9
ad991[02]: sysclk can be 1 GHz
2018-02-18 10:29:19 +00:00
2adba3ed33
urukul: document ad9912, and cpld, fix api
2018-02-14 09:45:17 +01:00
ede98679fc
ad9910: add documentation
2018-02-14 09:05:03 +01:00
7f1bfddeda
ad9910: tweak spi timing for higher speed
2018-02-13 22:13:40 +01:00
6a6695924f
urukul: proto 8
2018-02-13 22:13:40 +01:00
bc6af03a61
urukul: (proto 7) drop att_le
2018-02-13 22:13:40 +01:00
5a9035b122
urukul: faster spi clock
2018-01-22 18:27:40 +00:00
ca1fdaa190
ad9910: relax timing for faster spi clock
2018-01-22 18:27:40 +00:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
67746cc7a0
urukul: raise instead of assert, clean up
2018-01-03 19:22:36 +00:00
eae7584432
ad9910: add [wip]
2018-01-03 18:43:04 +00:00
7ac809f8b3
urukul: do io reset
2018-01-03 18:43:04 +00:00
28a3ee7e61
urukul: make STA reading robust, add io_rst(), clean up
2018-01-03 18:43:04 +00:00
cef40eef43
ad9912: clean up
2018-01-03 18:43:04 +00:00
d8dbab024d
urukul: don't deal with dds_reset for now
2018-01-03 18:43:04 +00:00
a940550e47
urukul: add CPLD and AD9912 driver [wip]
2018-01-02 19:59:24 +01:00
whitequark
a2bc12da68
Only print gateware/software mismatch warning once per process.
2017-12-26 21:13:46 +00:00
7f15f50878
coredevice/ad9912: add [untested, wip]
2017-11-24 18:47:46 +01:00
280392708d
sawg: fix typo
2017-11-22 20:06:02 +08:00
4deeccbead
coredevice: add shift register driver
2017-10-31 23:13:06 +08:00
42aca0d64a
ad5360: revert incorrect part of a9798ae2
...
We don't have enumerate() yet.
2017-10-23 18:50:50 +08:00
a9798ae2b1
gateware/spi: style
2017-10-23 18:46:18 +08:00
5437f0e3e3
rtio: make sequence errors consistently asychronous
2017-09-29 14:40:06 +08:00
Thao
e94d2d3779
set range for divider values
2017-09-21 14:26:16 +08:00
189020344c
spi: fix typo in doc
2017-07-20 22:18:21 +08:00
d0b21a8e85
manual: add short description of drivers, with replace support information. Closes #777
2017-07-20 12:01:29 +08:00
471605ec1e
pdq: move to https://github.com/m-labs/pdq
2017-07-19 17:35:28 +02:00
whitequark
dd87508a7f
Implement forwarding of logs from core device to master.
...
Fixes #691 .
2017-07-18 05:31:59 +00:00
d96c2abe44
pdq: read/write_reg -> get/set_reg
...
see also m-labs/pdq#14
2017-07-17 21:45:46 +02:00
9045b4cc19
drtio: initial firmware support for multi-link
2017-07-18 00:40:21 +08:00
f0841f5489
spline: be really verbose
...
closes #773
2017-07-07 11:43:58 +02:00
3bc0e32dc0
sawg: advance the timeline on Config access
...
c.f. #773 #765
2017-07-07 11:33:58 +02:00
3222f5036f
sawg: describe latency matching in detail
2017-07-06 10:06:21 +02:00
91ca9fbcad
sawg: also give offset some headroom
...
closes #771
2017-07-04 16:50:06 +02:00
whitequark
31b52ff1b3
coredevice: do not desync kernel TCP stream on RPCReturnValueError.
...
And propagate the error upwards instead of trying to squeeze it
through the core device in futility.
2017-06-25 04:47:32 +00:00
whitequark
fdb24ef139
coredevice: truncate overlong exception messages.
...
If we have a really long one (megabytes) then this may exhaust
the heap of the core device and crash it.
2017-06-25 04:39:08 +00:00
53be34a25f
sawg: clear phase accu in reset
2017-06-22 13:27:49 +02:00
4b3aad2563
sawg: clean up Config
...
* unify I and Q data limiters. there is no conceivable way why they
would be different.
* reorder clr bits to be like consistent
* move the sat add limiter to before the hbf again
2017-06-22 10:26:29 +02:00
8c56a95fa2
spi: add default busno
2017-06-20 00:49:38 +08:00
470bce6214
coredevice: add AD9154 SPI access driver
2017-06-20 00:48:50 +08:00
a6d06824e7
fix indentation
2017-06-20 00:12:11 +08:00
8f2d85fc5b
add back ad9154_reg.py
2017-06-19 23:45:32 +08:00
c86029bca2
i2c: expose restart as syscall, add structure for I2C-over-DRTIO
2017-06-19 23:44:51 +08:00
268b7d8aaf
typo
2017-06-19 15:42:10 +08:00
5d63489080
i2c,spi: add busno error detection
2017-06-19 14:27:30 +08:00
8399f8893d
add kernel access to non-realtime SPI buses ( #740 )
2017-06-18 12:45:07 +08:00
b5772f478a
sawg: add channel reset ( closes #751 )
2017-06-16 19:31:57 +02:00
fecc42fd0c
sawg/phaser: expand documentation ( closes #750 )
2017-06-14 11:49:52 +02:00
858c1be381
sawg: expand documentation
2017-06-13 18:51:48 +02:00
566ff73dff
pdq: unify spi-PDQ and usb-PDQ protocols
2017-06-10 15:03:25 +02:00
d8aee931ba
sawg: extend phase mode docs
2017-06-09 12:26:49 +02:00
whitequark
284382b1f5
compiler: add support for bytearray values in RPC ( #714 ).
2017-06-09 07:15:25 +00:00
whitequark
66a683f583
compiler: add support for bytes values in RPC ( #714 ).
2017-06-09 07:10:48 +00:00
91ad2bc600
sawg: add note about disabled q-exchange
2017-06-07 09:13:01 +02:00
94273e9455
sawg: add non-mu methods for limiter
2017-06-07 09:12:36 +02:00
ebb4660207
coredevice: compare software and gateware versions strictly
2017-06-07 02:11:54 +08:00
ab493a860d
coredevice: fix socket resource leak
2017-06-05 15:45:40 +08:00
bea7a47349
coredevice: compare gateware and software versions on release numbers only. Closes #738
2017-06-05 13:52:24 +08:00
2895448477
sawg: link Spline in docs
2017-05-23 10:33:04 +02:00
52625d57f0
sawg: explain DUC
2017-05-23 10:28:23 +02:00
06721c19c4
sawg: work around bool->int
2017-05-22 18:50:58 +02:00
1562f79101
sawg: expose config channel
2017-05-22 18:27:42 +02:00
5ccca74a3f
fold comm device into core device
2017-05-22 15:45:45 +08:00
170d2886fd
Merge branch 'pdq'
...
* pdq:
pdq: documentation
pdq2 -> pdq
pdq2: use 16 bit data, buffered read_mem()
spi: style
pdq2: mem_read
pdq2: align subsequent writes to end
sma_spi: undo cri_con
pdq2: memory write, kernel_invariants
sma_spi: cri/cd changes
sma_spi: LVCMOS25
coredevice.spi: kernel invariants and style
sma_spi: free up user_sma pins
sma_spi: add demo target with SPI on four SMA
pdq2: memory write
pdq2: crc/frame register accessors
doc: pdq2 spi backend
pdq2: config writes
2017-05-12 11:46:45 +02:00
fed24309b8
pdq: documentation
2017-05-02 18:55:02 +02:00
1a1edb13bf
pdq2 -> pdq
2017-05-02 18:05:41 +02:00
whitequark
41c4de4556
DMA: add API for a much faster replay using handles.
2017-04-18 08:20:12 +00:00
whitequark
c6e8d5c901
runtime: allow setting UART log level explicitly.
...
This is way more convenient than commenting out parts
of session.rs when debugging.
2017-04-15 08:27:18 +00:00
whitequark
0531dc45c3
DMA: erase trace before re-recording it.
...
Or we could needlessly OOM replacing a large trace.
2017-04-15 07:48:02 +00:00
534e681d0b
pdq2: use 16 bit data, buffered read_mem()
2017-04-13 20:49:46 +02:00
90cf11994e
spi: style
2017-04-13 13:38:29 +02:00
8446cccb4e
pdq2: mem_read
2017-04-13 13:38:13 +02:00
whitequark
296dc3b0c4
artiq_coreboot: allow hot-rebooting the device.
2017-04-11 03:24:24 +00:00
whitequark
1bd4d13391
artiq_compile: make print() write to core log, not an invalid op.
...
Fixes #710 .
2017-04-11 03:16:34 +00:00
20652ce128
pdq2: align subsequent writes to end
2017-04-09 13:50:19 +02:00
78dd4b8614
pdq2: memory write, kernel_invariants
2017-04-08 17:16:19 +02:00
0838981bed
coredevice.spi: kernel invariants and style
2017-04-08 17:16:19 +02:00
f13f6eb7be
pdq2: memory write
2017-04-08 17:16:19 +02:00
b9c61ae2da
pdq2: crc/frame register accessors
2017-04-08 17:16:19 +02:00
aebbaa339e
pdq2: config writes
2017-04-08 17:16:18 +02:00
whitequark
14ae1cc100
runtime: advance now on DMA replay.
...
Fixes #700 .
2017-04-05 18:34:36 +00:00
whitequark
948ed6fb0a
Extract core device management interface from session interface ( #691 ).
2017-03-29 03:36:21 +00:00
whitequark
b643847da5
Fix a misleading message for non-clean kernel termination.
2017-03-28 14:22:20 +00:00
b9ff5afc85
dma: improve/fix documentation
2017-03-27 17:21:39 +08:00
b74d6fb9ba
make collision and busy asynchronous errors, and simplify CPU/gateware handshake for output errors and reads
2017-03-27 16:32:23 +08:00
whitequark
795a3e24d8
artiq_coreboot: block until hotswap image is actually received.
2017-03-07 11:36:28 +00:00
whitequark
b0cdef3211
firmware: implement hotswap through artiq_coreboot tool.
2017-03-06 16:01:28 +00:00
whitequark
e8c093deb3
Allow changing runtime log level without recompilation.
...
This shouldn't affect performance much, as the log crate guards
every log statement with a branch, adding just two instructions.
2017-03-03 06:06:26 +00:00
whitequark
a4ece19614
Implement DMA playback.
2017-02-28 21:28:40 +00:00
7d6ebabc1b
reorganize core device communication code
2017-02-27 18:37:30 +08:00
b8bfcd2d7e
moninj: share probe/override numbers and use Enum
2017-02-27 11:54:16 +08:00
26654e6a3a
moninj: Python-side fixes
2017-02-27 11:45:04 +08:00
dff23293c7
Merge branch 'master' of github.com:m-labs/artiq
2017-02-27 01:05:40 +08:00
990b8152f6
coredevice: add moninj protocol driver
2017-02-27 00:59:17 +08:00
whitequark
5d3b00cf12
Implement recording of DMA traces on the core device.
2017-02-26 02:50:20 +00:00
e82ce3ea28
coredevice: ignore .dirty in version checks correctly
2017-02-25 20:05:05 +08:00
e323e37829
pcu: refactor into a device
2017-02-19 19:34:55 +01:00
b05d1bb7e3
coreanalyzer: fix corner case crash
2017-02-19 19:28:13 +01:00
1573ff5fc1
coreanalyzer: add WB stb signal
2017-02-18 14:53:10 +01:00
039ced6637
coreanalyzer: use VCD scopes for DDS/SPI
2017-02-18 14:25:01 +01:00
7519408857
coreanalyzer: add SPIMaster support
2017-02-18 14:13:20 +01:00
41e8acf3ad
coreanalyzer handle input events without timestamp
...
Offset the timeline by the first non-zero timestamp.
2017-02-18 14:12:02 +01:00
bc3fc26e34
coredevice: expose PCU
2017-02-18 14:09:12 +01:00
whitequark
6fd149f048
Show a message when interrupting a running kernel (except idle kernel).
...
Fixes #625 .
2017-01-31 22:53:38 +00:00
whitequark
74b910e97d
In case of a load error, pass the reason to host interpreter.
...
Fixes #654 .
2017-01-27 12:49:48 +00:00
7c699e2f80
drtio: add FIFO space request count debug API
2017-01-11 13:48:14 -06:00
fdfaa377db
drtio: add debug syscalls
2017-01-08 15:06:14 -06:00
1b49affd18
typo
2017-01-08 13:04:10 -06:00
082fdaf450
move i2c to libboard, do bit-banging on comms CPU
2017-01-04 21:04:38 +01:00
7ff77bceac
move AD9616 and AD9154 initialization to firmware
2017-01-03 16:11:38 +01:00
5efd0fcea5
sawg: documentation
2016-12-06 19:25:40 +01:00
695eb705b3
sawg: extract spline
2016-12-04 16:52:08 +01:00
39becd0b4e
sawg: document
2016-12-04 16:50:49 +01:00
87bd2072e8
sawg: round to int64
2016-12-02 18:07:01 +01:00
6e9bc7c05d
sawg: merge set/set64
2016-12-01 16:45:54 +01:00
ed6d1e73cc
sawg: cleanup
2016-11-30 10:52:35 +01:00
fb58f31c9d
Revert "sawg: test w/o discrete_compensate"
...
This reverts commit b736dd0df7
2016-11-29 20:56:04 +01:00
b736dd0df7
sawg: test w/o discrete_compensate
2016-11-29 20:52:02 +01:00
d8b5eac856
sawg: style
2016-11-29 20:51:40 +01:00
d9dd79fb1a
sawg: int32 artiq python
2016-11-29 17:36:03 +01:00
4a03e3fce0
sawg: rtio_output_wide
2016-11-29 17:23:06 +01:00
f6fc7f9216
rtio: rtio_output_{list->wide}
2016-11-29 17:22:55 +01:00
313aa32779
sawg: artiq-python list scoping
2016-11-29 17:20:02 +01:00
c53040e1e4
sawg: work around #632
2016-11-29 17:01:39 +01:00
a3d9e21b8c
sawg: artiq-python changes
2016-11-29 16:58:26 +01:00
23fd225947
sawg: spline knot packing/conversion, unittest
2016-11-29 14:49:07 +01:00
6799bb097a
sawg: adapt to int32/int64 change
2016-11-22 11:57:34 +01:00
4cd2b36995
Merge branch 'phaser' into phaser2
...
* phaser:
runtime: replace a (deliberate) memory leak with an interner.
compiler: disable remarks.
runtime: rewrite i2c support code in Rust.
runtime: rewrite rtio support code in Rust.
2016-11-21 23:11:52 +01:00
feb95bf3cf
Merge branch 'master' into phaser
...
* master:
runtime: replace a (deliberate) memory leak with an interner.
compiler: disable remarks.
runtime: rewrite i2c support code in Rust.
runtime: rewrite rtio support code in Rust.
2016-11-21 22:26:52 +01:00
whitequark
a825584ac0
runtime: rewrite rtio support code in Rust.
2016-11-21 17:13:09 +00:00
4160490e0a
Merge branch 'phaser' into phaser2
...
* phaser: (23 commits)
RELEASE_NOTES: update
pipistrello: add some inputs
Remove last vestiges of nist_qc1.
Fully drop AD9858 and kc705-nist_qc1 support (closes #576 ).
coredevice.dds: reimplement fully in ARTIQ Python.
compiler: unbreak casts to int32/int64.
analyses.constness: fix false positive on x[...].
inferencer: significantly improve the op-assignment diagnostic.
Fix tests.
Move mu_to_seconds, seconds_to_mu to Core.
artiq_devtool: don't crash on invalid utf-8.
artiq_devtool: detect a race condition during connect.
llvm_ir_generator: handle no-op coercions.
conda: use development version of migen/misoc
Revert accidentally committed code.
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
analyses.invariant_detection: implement (#622 ).
Fix whitespace.
coredevice.dds: work around the round(numpy.float64()) snafu.
coredevice.dds: update from obsolete int(width=) syntax (fixes #621 ).
...
2016-11-21 17:29:46 +01:00
f7e8961ab0
Merge branch 'master' into phaser
...
* master: (23 commits)
RELEASE_NOTES: update
pipistrello: add some inputs
Remove last vestiges of nist_qc1.
Fully drop AD9858 and kc705-nist_qc1 support (closes #576 ).
coredevice.dds: reimplement fully in ARTIQ Python.
compiler: unbreak casts to int32/int64.
analyses.constness: fix false positive on x[...].
inferencer: significantly improve the op-assignment diagnostic.
Fix tests.
Move mu_to_seconds, seconds_to_mu to Core.
artiq_devtool: don't crash on invalid utf-8.
artiq_devtool: detect a race condition during connect.
llvm_ir_generator: handle no-op coercions.
conda: use development version of migen/misoc
Revert accidentally committed code.
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
analyses.invariant_detection: implement (#622 ).
Fix whitespace.
coredevice.dds: work around the round(numpy.float64()) snafu.
coredevice.dds: update from obsolete int(width=) syntax (fixes #621 ).
...
2016-11-21 17:29:39 +01:00
whitequark
f4b7666768
coredevice.dds: reimplement fully in ARTIQ Python.
...
This commit also drops AD9858 support from software.
2016-11-21 15:13:26 +00:00
c73b1af7ab
coredevice/sawg: missing comma
2016-11-21 13:16:44 +01:00
b226dbd257
sawg: unittest data format
2016-11-21 12:35:57 +01:00
whitequark
009d396740
Move mu_to_seconds, seconds_to_mu to Core.
2016-11-21 05:37:30 +00:00
9221a275cb
sawg: kernel support (wip)
2016-11-20 16:39:53 +01:00
whitequark
abf2b32b20
coredevice.dds: work around the round(numpy.float64()) snafu.
2016-11-20 09:49:58 +00:00
whitequark
d7f4397924
coredevice.dds: update from obsolete int(width=) syntax ( fixes #621 ).
2016-11-20 09:49:39 +00:00
641f07119f
runtime: support rtio data wider than 64 bit
2016-11-18 17:08:33 +01:00
aedb6747f2
Merge branch 'master' into phaser
...
* master: (47 commits)
runtime: disable the Nagle algorithm entirely.
runtime: buffer RPC send packets.
runtime: don't print debug messages to the UART.
runtime: print microsecond timestamps in debug messages.
artiq_devtool: abort if build failed.
conda: bump llvmlite-artiq dep.
conda: bump llvmlite-artiq dep.
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
artiq_devtool: more robust port forwarding.
setup: remove paramiko dependency (optional and developer-only)
artiq_devtool: implement.
artiq_compile: actually disable attribute writeback.
conda: use pythonparser 1.0.
conda: tighten pythonparser dependency (fixes #600 ).
doc: clarify kernel_invariant doc (fixes #609 ).
compiler: Emit all-kernel_invariant objects as LLVM constants
conda: update for LLVM 3.9.
add has_dds, use config flags
Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
Revert "Revert "Revert "Update for LLVM 3.9."""
...
2016-11-13 16:54:28 +01:00
whitequark
0e76cbc414
artiq_compile: actually disable attribute writeback.
...
I wrote both halves of this condition but forgot to hook
them together.
Fixes #586 .
2016-11-10 01:04:36 +00:00
whitequark
6fcd57a41a
runtime: fix remaining async RPC bugs.
2016-11-01 10:33:57 +00:00
whitequark
c1e6d4b67c
runtime: fix multiple async RPC bugs.
2016-11-01 06:51:44 +00:00
6d07a16c62
Merge branch 'master' into phaser
...
* master: (72 commits)
gateware: extend mailbox to 3 entries.
master/worker_db: set default value for archive
master: keep dataset manager consistent when set_dataset is called with contradictory attributes
master: archive input datasets. Closes #587
master: ensure same dataset is in broadcast and local when mutating
scheduler: default submission arguments, closes #577
pdq2: sync with pdq2
doc: clarify usage of pause/check_pause, closes #571
dashboard/datasets: use scientific spinbox and increase number of decimals, closes #572
gateware/spi: fix import
runtime: fix use of $(realpath) in Makefile.
test: fix printf specifier.
llvm_ir_generator: make sure RPC allocations are not underaligned.
runtime: use i64 for watchdog timeout, not i32.
runtime: port ksupport to Rust.
runtime: remove some redundant libm functions copied inline.
language: Add "A" (ampere) as well-known unit for arguments
conda: misoc 0.4 (csr)
runtime: cap log level at debug.
runtime: discard unnecessary sections.
...
2016-10-28 01:40:11 +02:00
78700a67bc
sawg: fast-math
2016-10-18 10:05:51 +02:00
b2327cf808
sawg: core is kernel_invariant
2016-10-18 10:05:51 +02:00
4c7c479c94
ad9154: add mirrored bits
2016-10-13 15:02:18 +02:00
9644a3a362
ad9154: mix mode addr, digital gain must be on
2016-10-12 15:00:53 +02:00
1117fe191b
phaser: support core stpl
2016-10-12 12:03:29 +02:00
whitequark
4f11b071a5
runtime: remove useless handshaking in analyzer.
2016-10-07 05:53:16 +00:00
whitequark
557bc4bb56
runtime: remove unnecessary buffering.
2016-10-06 17:25:43 +00:00
whitequark
bcdbd00e7b
runtime: remove unnecessary null bytes from session protocol.
2016-10-06 15:39:00 +00:00
1193ba4bf4
ad9154: merge csr spaces
2016-10-06 16:21:15 +02:00
4d87f0e9e0
phaser: instantiate jesd204b core, wire up
2016-10-06 14:44:22 +02:00
4a0eaf0f95
phaser: add jesd204b rtio dds
...
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
2016-10-05 16:17:50 +02:00
whitequark
494cfca41c
coreanalyzer: fix rtio_log message extraction.
...
Fixes #550 .
2016-09-14 10:18:00 +00:00
whitequark
25ec99930c
Also serialize numpy.int{32,64} like int in RPC return values.
...
Fixes #555 .
2016-09-09 08:52:18 +00:00
2b282456dc
coredevice/ttl: fix imports
2016-09-07 17:37:14 +08:00
486fe97649
ttl: add level-based APIs ( #218 )
2016-09-07 16:55:21 +08:00
310acca372
dds: fix docstring, closes #540
2016-08-16 14:55:30 +08:00
23b704802d
dds: make init_sync accessible for AD9914 only
2016-08-15 17:45:18 +08:00
raghu
c4d17138a1
added sync for AD9914
2016-08-15 17:44:27 +08:00
89df048efb
analyzer: use picosecond resolution in VCD output. Closes #528
2016-08-03 10:57:15 +08:00
whitequark
933ea53c77
compiler: add basic numpy array support ( #424 ).
2016-07-06 09:51:57 +00:00
whitequark
906db876a6
language: replace coredevice int with numpy.{int32,int64}.
...
Fixes #453 .
2016-07-06 04:44:21 +00:00
73ac153509
spi: expose more documentation on chaining transfers
2016-07-04 12:43:33 +02:00
c6e54e3016
coredevice/core: add syscall type annotation
2016-06-29 10:38:19 +08:00
c8dc6ca07c
inter-experiment smooth handover
2016-06-29 02:37:50 +08:00
5853e31ac2
coredevice/comm_tcp: more appropriate exception
2016-06-26 19:08:40 +08:00
bc7d06468f
coredevice/comm_generic: style
2016-06-26 18:50:02 +08:00
a8b211f891
spi: cross-reference bit ordering and alignment, closes #482
2016-06-15 15:04:04 +02:00
3aab77d7a0
doc: precisions about time cursor interaction
2016-06-12 13:08:47 +08:00
b9c3edd49f
Revert "coredevice: automatically close on pause"
...
This reverts commit 1f50b3428e
2016-06-11 10:12:36 -06:00
whitequark
e47538ca33
analyzer: explicitly delimit messages (with \x1D).
...
Fixes #461 .
2016-06-07 11:26:49 +00:00
0ac0547bca
dds: use fast math for asf computations
2016-06-03 23:34:32 -04:00
dhslichter
98ae779941
dds: fix asf_to_amplitude
2016-06-03 23:02:16 -04:00
3d6f55104b
coredevice/TCA6424A: convert 'outputs' value to little endian. Closes #437
2016-05-22 06:53:18 -07:00
whitequark
640022122b
embedding: refactor some more.
2016-05-16 14:38:09 +00:00
whitequark
c94c411fd5
compiler: demangle symbols.
...
In future commits we'll add Itanium C++ ABI style mangling to ARTIQ
emitted function names.
2016-05-16 14:38:09 +00:00
whitequark
a88425b66b
compiler: allow RPCing builtin functions.
...
Fixes #366 .
2016-04-26 01:31:17 +00:00
whitequark
1464bae6b7
compiler: don't typecheck RPCs except for return type.
...
Fixes #260 .
2016-04-26 01:12:36 +00:00
whitequark
5cccdcaad6
coredevice: deserialize int64(width=64) as int(width=64), not host_int.
...
Fixes #402 .
2016-04-21 18:59:54 +00:00
1f50b3428e
coredevice: automatically close on pause
2016-04-12 15:46:21 +08:00
whitequark
9cc9e8b276
embedding: s/kernel_constant_attributes/kernel_invariants/g
...
Requested in #359 .
2016-04-06 22:38:31 +00:00
whitequark
712e16b79e
ttl: mark constant attributes for TTL{In,InOut,ClockGen}.
2016-04-02 18:20:51 +00:00
whitequark
132b55d6be
coredevice: format backtrace RA as +0xN, not 0xN.
...
The absolute address is somewhere in the 0x4000000 range; the one
that is displayed is an offset from the shared object base.
2016-04-02 18:05:40 +00:00
a545598d4c
style
2016-03-29 16:19:03 +08:00
50888865e7
doc/dds: fix init timing margin
2016-03-29 12:01:32 +08:00
ce57794e7f
doc: fix comment about when and how DDS init should be done. Closes #353
2016-03-29 11:10:53 +08:00
whitequark
1038f1321f
compiler: allow specifying per-function "fast-math" flags.
...
Fixes #351 .
2016-03-28 21:44:08 +00:00
whitequark
6f5332f892
compiler: allow flagging syscalls, providing information to optimizer.
...
This also fixes a crash in test_cache introduced in 1d8b0d46
2016-03-28 19:56:56 +00:00
whitequark
507ad96db3
coredevice: add some kernel_constant_attributes specifications.
2016-03-28 00:06:00 +00:00
5b536d7c67
i2c: fix variable name ( closes #347 )
2016-03-25 12:51:55 +01:00
4d22db1aff
coredevice/exceptions/ClockFailure: improve description
2016-03-19 18:01:00 +08:00
641831e0e1
dds: improve error reporting
2016-03-19 12:15:19 +08:00
d0af58d122
coredevice: only import common RTIO exceptions
2016-03-19 12:11:47 +08:00
whitequark
501de30626
Report watchdog expiration and RTIO clock failure as exceptions.
...
Fixes #316 .
2016-03-18 22:29:53 +00:00
whitequark
78fa5becea
compiler: refuse to embed a function from another core device.
...
Fixes #332 .
2016-03-18 02:01:14 +00:00
cb8e497ff6
analyzer: fix DDSHandler setup
2016-03-15 22:14:44 +08:00
0076fc4216
analyzer: fix AD9914 FTW decoding
2016-03-15 22:14:21 +08:00
6a9957a2ac
analyzer: fix get_dds_sysclk
2016-03-15 21:47:24 +08:00
e13d424398
analyzer: strip final StoppedMessage for VCD output
2016-03-15 18:33:36 +08:00
8a6873cab2
analyzer: use EOP, flush pipeline on stop
2016-03-15 17:49:59 +08:00
f4f95d330b
Merge branch 'master' of github.com:m-labs/artiq
2016-03-10 11:15:30 +08:00
1739e0f2f8
coredevice: put cache into separate file/device
2016-03-10 10:46:19 +08:00
9edaf16735
exceptions: clarify RTIOBusy
2016-03-09 22:11:32 +01:00
349a66124b
Merge branch 'master' into rtiobusy
...
* master:
coredevice: fix _DDSGeneric __init__ args
rtio/core: fix syntax
rtio: disable replace on rt2wb channels
examples: dds_bus -> core_dds
fix more multi-DDS-bus problems
runtime: fix dds declarations
support for multiple DDS buses (untested)
2016-03-09 17:58:58 +01:00
b32217cc84
coredevice: fix _DDSGeneric __init__ args
2016-03-09 17:23:02 +01:00
0bd9add95e
spi: fix frequency_to_div()
2016-03-09 12:32:31 +01:00
b0de9ee90a
coredevice: add RTIOBusy to __all__
2016-03-09 12:27:45 +01:00
446dcfbfbc
Merge commit '9d1903a' into rtiobusy
...
* commit '9d1903a':
coredevice/i2c,ttl,spi: consistent device get
examples/device_db: remove --no-localhost-bind
Monkey-patch asyncio create_server (fixes #253 ).
pipistrello: drop ttls on pmod, add leds back in
pipistrello: try with fewer leds/pmod ttl
2016-03-09 11:55:08 +01:00
f0b0b1bac7
support for multiple DDS buses (untested)
2016-03-09 17:12:50 +08:00
9d1903a4e2
coredevice/i2c,ttl,spi: consistent device get
2016-03-09 13:01:34 +08:00
2cb58592ff
rtio: add RTIOBusy
2016-03-08 18:04:34 +01:00
71105fd0d7
rtio: collision_error -> collision
2016-03-08 15:38:35 +08:00
c73b080019
doc/PCA9548: clarify channel selection
2016-03-07 00:17:45 +08:00
2770d9c729
doc: I2C/QC2
2016-03-05 19:02:03 +08:00
683716017b
test: I2C/PCA9548 unittest
2016-03-05 19:01:35 +08:00
f2b4b975a3
ad5360: add documentation and an example
2016-03-04 23:36:17 +01:00
18ccac717b
ad5360: t16 is a max
2016-03-04 19:46:18 +01:00
eb2ec40b3a
ad5360: un-factor write_channels
2016-03-04 19:01:29 +01:00
725943fee2
ad5360: add busy and update timings
2016-03-04 18:53:05 +01:00
e834a88340
ad5360: style
2016-03-04 18:15:35 +01:00
710717ca9b
ad5360: add batched zero-length multi-channel set()
2016-03-04 18:14:31 +01:00
4ae3ca5f23
spi/ad5360: refactor, small fixes
2016-03-04 18:14:31 +01:00
200cddc346
coredevice/i2c: fix exception message
2016-03-05 00:51:13 +08:00
70f0a7447f
coredevice/PCA9548: fix I2C address
2016-03-05 00:47:24 +08:00
df71b82037
coredevice/i2c: fix imports
2016-03-05 00:43:13 +08:00
2f1a2782d2
coredevice: add I2C, PCA9548, TCA6424A drivers
2016-03-05 00:17:41 +08:00
ff4a46c278
runtime/i2c: make syscalls more ARTIQ-Python-friendly
2016-03-05 00:16:23 +08:00
3364827744
ttl/TTLClockGen: fix FTW computation with ref_multiplier != 1
2016-03-04 16:59:59 +08:00
4352d15016
coredevice/core: add ref_multiplier and coarse_ref_period attributes
2016-03-04 16:59:35 +08:00
whitequark
6e44c5424d
coredevice.ttl: add missed int64 conversion.
2016-03-04 08:37:43 +00:00
669fbaa4f1
ad53xx->ad5360 and refactor
2016-03-04 00:00:25 +01:00
dc6d116824
spi: have write() delay by transfer duration
2016-03-03 21:57:27 +01:00
9969cd85de
ad53xx: ldac may be none
2016-03-02 15:50:02 +01:00
1e4bccae20
ad53xx: add
2016-03-02 00:12:01 +01:00
162ecdd574
spi: cleanup, add frequency_to_div()
2016-03-02 00:11:17 +01:00
d973eb879f
coredevice.spi: docstring fix
2016-03-01 22:42:00 +01:00
f754d2c117
Merge branch 'spimaster'
...
* spimaster: (52 commits)
runtime/rtio: rtio_process_exceptional_status() has only one user
coredevice.spi, doc/manual: add spi
kc705: move ttl channels together again, update doc
runtime: rt2wb_input -> rtio_input_data
examples/tdr: adapt to compiler changes
bridge: really fix O/OE
runtime: define constants for ttl addresses
coredevice.ttl: fix sensitivity
bridge: fix ttl o/oe addresses
runtime: refactor ttl*()
rtio: rm rtio_write_and_process_status
coredevice.spi: unused import
rt2wb, exceptions: remove RTIOTimeout
gateware.spi: delay only writes to data register, update doc
nist_clock: disable spi1/2
runtime/rt2wb: use input/output terminology and add (async) input
examples: update device_db for nist_clock spi
gateware.spi: rework wb bus sequence
nist_clock: rename spi*.ce to spi*.cs_n
nist_clock: add SPIMasters to spi buses
...
2016-03-01 22:08:08 +01:00
0456169558
coredevice.spi, doc/manual: add spi
2016-03-01 21:29:09 +01:00
f30dc4b39e
runtime: rt2wb_input -> rtio_input_data
2016-03-01 19:22:42 +01:00
3aebbbdb61
coredevice.ttl: fix sensitivity
2016-03-01 18:22:03 +01:00
8adef12781
runtime: refactor ttl*()
...
* remove rt2wb_output
* remove ttl_*() ttl.c ttl.h
* use rtio_output() and rtio_input_timestamp()
* adapt coredevice/compiler layer
* adapt bridge to not artiq_raise_from_c()
2016-03-01 16:36:59 +01:00
29776fae3f
coredevice.spi: unused import
2016-03-01 15:38:40 +01:00
324660ab40
rt2wb, exceptions: remove RTIOTimeout
...
Assume that rt2wb transactions either collide and are then
reported (https://github.com/m-labs/artiq/issues/308 ) or that
they complete and the delay with which they complete does not matter.
If a transaction is ack'ed with a delay because the WB core's downstream
logic is busy, that may lead to a later collision with another WB
transaction.
2016-03-01 14:44:07 +01:00
c7d48a1765
coredevice/TTLOut: add dummy output function
2016-03-01 19:03:10 +08:00
7d7a710a56
runtime/rt2wb: use input/output terminology and add (async) input
2016-03-01 00:35:56 +01:00
7ab7f7d75d
Merge branch 'master' into spimaster
...
* master:
artiq_flash: use term 'gateware'
targets/kc705-nist_clock: add clock generator on LA32 for testing purposes
doc: insist that output() must be called on TTLInOut. Closes #297
doc: update install instructions
coredevice: do not give up on UTF-8 errors in log. Closes #300
use m-labs setup for defaults
fix indentation
2016-02-29 20:47:52 +01:00
6c899e6ba6
runtime/rtio: fix rtio_input_wait(), add RTIOTimeout
2016-02-29 19:49:15 +01:00
16537d347e
coredevice.spi: cleanup
2016-02-29 19:48:26 +01:00
e11366869d
coredevice/spi: clean up api
2016-02-29 17:54:42 +01:00
a1e1f2b387
doc: insist that output() must be called on TTLInOut. Closes #297
2016-03-01 00:28:40 +08:00
4467f91cbf
coredevice: do not give up on UTF-8 errors in log. Closes #300
2016-02-29 22:21:10 +08:00
c226aeb0d4
coredevice/spi: read_sync read bit
2016-02-29 14:55:29 +01:00
df7d15d1fe
runtime: refactor spi into rt2wb
2016-02-29 13:54:36 +01:00
8b2b278457
spi: add coredevice support
2016-02-29 00:44:48 +01:00
whitequark
cf41890255
Correctly display backtraces that contain inlined functions.
2016-02-24 17:44:19 +00:00
whitequark
950eaef08c
coredevice: re-export more exceptions.
2016-02-24 15:09:22 +00:00
whitequark
9db2be2b03
compiler: only use colors in diagnostics on POSIX ( fixes #272 ).
2016-02-22 11:27:45 +00:00
whitequark
a5977a5b62
Commit missing parts of 1465fe6f8.
2016-02-15 21:42:51 +00:00
68891493a3
analyzer: move common to artiq.protocols
...
migen was still pulled in through rtio.__init__.py
2016-01-29 20:26:48 -07:00
whitequark
7f9a180946
Fix typo.
2016-01-26 23:23:35 +00:00
d1119d7747
artiq_dir: move out of tools to unlink dependencies
2016-01-25 18:15:50 -07:00
cbb60337ae
refactor Analyzer constants to unlink dependencies
2016-01-25 18:03:48 -07:00
f4c7f02127
CoreException: store at 'py_exn.artiq_core_exception'
...
... and fix a few imports
2016-01-25 17:24:00 -07:00
e0f2d94191
coredevice: remove some print()s
2016-01-25 17:24:00 -07:00
2beaf23e6c
language...ARTIQException -> coredevice...CoreException
...
gets rid of a cross import
is only used there
2016-01-25 17:24:00 -07:00
765001054d
artiq.experiment: merge language and coredevice namespaces
...
perl -i -pe 's/^from artiq import \*$/from artiq.experiment import */' your_experiments/*.py
(assuming you skipped the changes form the previous commit)
2016-01-25 17:24:00 -07:00
dc709a77b8
PPP support (TCP broken)
2016-01-18 20:09:10 -07:00
whitequark
5c6b1517d0
Rigorously treat builtin core device exceptions.
2016-01-19 01:45:25 +00:00
whitequark
785b2736a0
Document core device cache ( #219 ).
2016-01-16 16:38:55 +00:00
whitequark
67d2e7a828
worker: display compile warnings and errors nicely ( #227 ).
2016-01-16 01:28:26 +00:00
a9cf89215b
coredevice/dds: use explicit 64-bit ints for ftw computations
2016-01-14 15:25:01 -07:00
whitequark
225f7d7302
Commit missing parts of 9366a29.
2016-01-10 20:01:26 +00:00
whitequark
b669e83554
Inject parameters into coredevice exception message when mapping.
2016-01-10 18:06:28 +00:00
whitequark
4198601abb
coredevice.exceptions: add CacheError.
2016-01-10 14:43:30 +00:00
whitequark
f8e50f2b0c
Remove redundant ksupport API.
2016-01-10 14:27:46 +00:00
whitequark
cc45694f5a
Commit missing parts of 9366a29.
2016-01-10 13:08:26 +00:00
whitequark
9366a29483
Implement core device storage ( fixes #219 ).
2016-01-10 13:04:55 +00:00
whitequark
03dd1c3a43
Refactor the logic of printing diagnostics to solely rely on Engine.
2016-01-04 22:11:54 +08:00
whitequark
38a99fde52
Implement selective attribute writeback using shadow memory.
2016-01-02 22:51:04 +08:00
whitequark
79d020dd3a
transforms.artiq_ir_generator: handle terminated try body.
2015-12-31 22:36:25 +08:00
whitequark
8aa34ee952
compiler: don't require exceptions to inherit ARTIQException.
2015-12-31 21:54:54 +08:00
whitequark
8fb6d4cdb4
coredevice.comm_generic: handle RPC default args correctly.
2015-12-29 02:54:34 +08:00
b5253e1353
coredevice/analyzer: decode log messages
2015-12-27 01:28:34 +08:00
24fa74a8ab
coredevice/analyzer: support TTL clockgen
2015-12-26 21:51:37 +08:00
1c36ae0672
coredevice/analyzer: support TTL inputs
2015-12-26 21:24:53 +08:00
a871194ee4
coredevice/analyzer: prefix channel names with their types
2015-12-26 17:47:53 +08:00
2b70fa14a6
coredevice/analyzer: update rtio_slack on output messages only
2015-12-26 17:47:08 +08:00
cd8eccfd46
coredevice/analyzer: add rtio_slack channel
2015-12-25 00:40:47 +08:00
179c50480f
frontend: split coretool into coreconfig, corelog and coreanalyzer
2015-12-24 18:51:11 +08:00
e41e2c088d
analyzer: encapsulate decoded dump, get onehot sel from header
2015-12-24 00:31:21 +08:00
4be5df9802
coredevice/analyzer: DDS decoding
2015-12-23 18:57:53 +08:00
58d0e2c0b8
coredevice/analyzer: log TTL decoding in debug mode
2015-12-23 18:56:23 +08:00
e4d73c0302
artiq/coredevice/dds: fix dds_set signature
2015-12-23 17:25:31 +08:00
f6522922f8
coredevice/exceptions: PEP8
2015-12-22 12:03:11 +08:00
23355d8eff
coredevice: restore RTIOCollisionError
2015-12-22 11:59:18 +08:00
007a7170e1
analyzer: report DDS channel number
2015-12-21 18:37:53 +08:00
e87436fc03
coredevice/analyzer: remove zero-timestamp msg filtering (now unnecessary)
2015-12-21 11:15:58 +08:00
b96e0d241e
coredevice/analyzer: set VCD timescale
2015-12-20 22:06:07 +08:00
4b5c10b641
coredevice/core: remove default period
2015-12-20 22:05:52 +08:00
cdcb57effe
coredevice/analyzer: basic VCD writing
2015-12-20 19:32:52 +08:00
46f59b673f
coredevice: analyzer message decoding
2015-12-20 14:34:16 +08:00
whitequark
afee03b89c
Commit missing parts of 4fb1de33.
2015-12-19 06:41:32 +08:00
whitequark
4fb1de33c9
Initial invocation of a @kernel function can now return a value ( fixes #197 ).
2015-12-19 05:26:18 +08:00
0832c71a66
coredevice/comm_tcp: support retrieving analyzer data
2015-12-18 18:22:50 +08:00
whitequark
52102a1a79
Fix handling of default values for RPC arguments ( fixes #190 ).
2015-12-18 18:03:07 +08:00
eeb53c5aa5
coredevice/comm: compare software and gateware versions. Closes #97
2015-12-11 22:56:40 +08:00
whitequark
16ae0fb6eb
compiler.embedding: instantiate RPC method types ( fixes #180 ).
2015-11-27 16:29:13 +08:00
whitequark
e1cd2ccd40
compiler: pull in dependencies in more finely grained way ( fixes #181 ).
2015-11-24 17:32:04 +08:00
whitequark
bd5b324fc2
Merge branch 'master' into new-py2llvm
2015-10-13 19:24:45 +03:00
5f89d1a78f
doc: document core device driver. Closes #119
2015-10-06 18:12:57 +08:00
whitequark
7a6fc3983c
Make delay component of function type unifyable.
2015-09-30 18:41:14 +03:00
whitequark
3e1348a084
Merge branch 'master' of github.com:m-labs/artiq into new-py2llvm
2015-09-27 18:22:28 +03:00
Raghavendra Srinivas
b3831d3387
dds: support amplitude tuning on AD9914
...
Closes #108
2015-09-05 13:15:09 -06:00
6e5b71a43e
coredevice/comm_tcp: disable socket timeout after connect
...
Reads may block indefinitely.
2015-09-03 09:59:24 -06:00
whitequark
2df8b946f9
Factor out the code to pretty-print diagnostics.
2015-08-31 22:52:39 -06:00
whitequark
501ba912c2
Implement {delay,now,at}{,_mu} and {mu,seconds}_to_{seconds,mu}.
2015-08-31 09:59:33 -06:00
a36a50ba0d
comm_tcp: add connect timeout
2015-08-28 16:23:23 +08:00
whitequark
9605e8215f
coredevice.ttl: update for new int semantics.
2015-08-28 02:11:26 -05:00
whitequark
7c1abb25ec
compiler.embedding: test all diagnostics.
...
Also, unify and improve diagnostic messages.
2015-08-28 00:47:28 -05:00
