David Nadlinger
d87042597a
master/worker_impl: Factor out "completed" message sending [nfc]
...
Just reduces the visual complexity/potential for typos a bit, and
we already have put_exception_report().
2020-06-18 01:30:46 +01:00
charlesbaynham
2429a266f6
ad9912: Fix typing problem on ad9912 ( #1466 )
...
Closes #1463
FTW and phase word were ambiguously typed, resulting in failure to compile
2020-06-16 20:17:22 +02:00
Harry Ho
1a17d0c869
zotino: add USER LED test
2020-06-11 16:03:56 +08:00
Harry Ho
6156bd4088
fastino: add tests using DACs and USER LEDs
2020-06-11 14:55:46 +08:00
a18d2468e9
test: do not build libartiq_support in lit.cfg
2020-06-10 17:15:24 +08:00
9822b88d9b
ad9910: fix asf range ( #1450 )
...
* ad9910: fix asf range
The ASF is a 14-bit word. The highest possible value is 0x3fff, not
0x3ffe. `int(round(1.0 * 0x3fff)) == 0x3fff`.
I don't remember and understand why this was 0x3ffe since the beginning.
0x3fff was already used as a default in `set_mu()`
Signed-off-by: Robert Jördens <rj@quartiq.de>
* RELEASE_NOTES: ad9910 asf scale change
Co-authored-by: David Nadlinger <code@klickverbot.at>
2020-05-29 11:13:26 +02:00
cb76f9da89
metlino: fix CSR collisions
...
Closes #1425
2020-05-29 15:59:44 +08:00
bd9eec15c0
metlino: increase number of DRTIO links
...
Seems OK with Vivado 2019.2.
2020-05-29 15:59:16 +08:00
d5c1eaa16e
runtime: remove stack alignment requirement
...
I suppose this was for TMPU, but was never finished.
2020-05-29 15:37:23 +08:00
02900d79d0
firmware: fix typos
2020-05-29 15:21:07 +08:00
d8b5bcf019
sayma_amc: support uTCA backplane for DRTIO
2020-05-29 14:58:49 +08:00
8b939b7cb3
sayma_amc: remove Master (obsoleted by Metlino)
2020-05-29 14:40:49 +08:00
Charles Baynham
692c466838
Use logger formatting
2020-05-26 17:59:55 +08:00
Charles Baynham
8858ba8095
dashboard: Restart applets if required
...
Restart applets that are already running if a ccb call updates their spec
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2020-05-26 17:59:55 +08:00
2538840756
Coredevice Input Validation ( #1447 )
...
* Input validation and masking of SI -> mu conversions (close #1446 )
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* Update RELEASE_NOTES
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
Co-authored-by: Robert Jördens <rj@quartiq.de>
2020-05-17 15:09:11 +02:00
b3b6cb8efe
ad53xx improvements ( #1445 )
...
* ad53xx: voltage_to_mu() validation & documentation (closes #1443 , #1444 )
The voltage input (float) is checked for validity. If we need more
speed, we may want to check the DAC-code for over/underflow instead.
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx documentation: voltage_to_mu is only valid for 16-bit DACs
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* AD53xx: add voltage_to_mu method (closes #1341 )
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx: improve voltage_to_mu performance
Interger comparison is faster than floating point math.
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* AD53xx: voltage_to_mu method now uses attribute values
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* Fixup RELEASE_NOTES.rst
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx: documentation improvements
voltage_to_mu return value
14-bit DAC support
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
2020-05-08 19:23:43 +02:00
4e9a529e5a
kasli: integrate WRPLL
2020-05-07 21:34:02 +08:00
60e5f1c18e
kasli: DRTIO support for Kasli 2
2020-05-07 20:09:43 +08:00
1f2182d4c7
kasli: default to hardware v2
2020-05-07 19:15:03 +08:00
35f1814235
kasli: implement virtual LEDs
2020-05-07 19:07:43 +08:00
b83afedf43
kasli: light up ERROR LED on panic
2020-05-07 19:06:10 +08:00
4982fde898
firmware: I2C I/O expander support
2020-05-05 21:38:17 +08:00
ef4e5bc69b
firmware: Kasli I2C EEPROM cleanup
2020-05-05 21:29:29 +08:00
85e92ae28c
compiler: use more LLVM tools on ARM ( #733 )
2020-04-28 16:21:50 +08:00
7e400a78f4
kasli: compile tester for hw 2.0 by default
2020-04-28 16:07:56 +08:00
140a26ad7e
compiler: ld -> ld.lld
2020-04-28 16:07:26 +08:00
4228e0205c
compiler: link with lld on ARM ( #733 )
2020-04-28 15:00:24 +08:00
3a7819704a
rtio: support direct 64-bit now CSR in KernelInitiator
2020-04-26 16:04:32 +08:00
251a0101a6
compiler: support disabling now-pinning
2020-04-26 12:38:43 +08:00
d19f28fa84
kasli: v2 clocking WIP, remove SFP LEDs from RTIO
2020-04-23 23:02:18 +08:00
9bc43b2dbf
kasli: support EEPROM on v2
2020-04-23 23:00:36 +08:00
77e6fdb7a7
artiq_flash: cleanup Sayma RTM management, support flashing AMC with RTM disconnected
2020-04-14 18:22:06 +08:00
ea79ba4622
ttl_serdes: detect edges on short pulses
...
Edges on pulses shorter than the RTIO period were missed because the
reference sample and the last sample of the serdes word are the same.
This change enables detection of edges on pulses as short as the
serdes UI (and shorter as long as the pulse still hits a serdes sample
aperture).
In any RTIO period, only the leading event corresponding to the first
edge with slope according to sensitivity is registerd. If the channel is
sensitive to both rising and falling edges and if the pulse is contained
within an RTIO period, or if it is sensitive only to one edge slope and
there are multiple pulses in an RTIO period, only the leading event is
seen. Thus this possibility of lost events is still there. Only the
conditions under which loss occurs are reduced.
In testing with the kasli-ptb6 variant, this also improves resource
usage (a couple hundred LUT) and timing (0.1 ns WNS).
2020-04-13 13:21:03 +02:00
e8b73876ab
comm_kernel: add Zynq runtime identifier
2020-04-12 17:25:14 +08:00
de57039e6e
comm_kernel: cleanup
2020-04-12 16:02:36 +08:00
9dc24f255e
comm_kernel: remove dead code
2020-04-12 15:06:46 +08:00
fb0ade77a9
firmware: fix non-DRTIO build
2020-04-10 17:23:17 +08:00
ec7b2bea12
sayma: round FTW like Urukul in JDCGSyncDDS
2020-04-08 15:00:33 +08:00
0f4be22274
sayma: add simple sychronized DDS for testing
2020-04-08 14:13:54 +08:00
3c823a483a
sayma: improve DAC sync messaging (again)
2020-04-06 22:36:43 +08:00
4d601c2102
sayma: improve DAC sync messaging
2020-04-06 22:36:03 +08:00
61d4614b61
sayma: fix/cleanup DRTIO-DAC sync interaction
2020-04-06 22:34:05 +08:00
facc0357d8
drtio: make sure receive buffer is drained after ping reply
2020-04-06 22:33:15 +08:00
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
8f608fa2fa
examples/sines_urukul_sayma: adapt for sayma v2, use 1 DAC only
2020-04-05 16:51:40 +08:00
Etienne Wodey
90d08988b2
language/environment: BooleanValue: fix type detection
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2020-04-04 15:37:04 +08:00
Etienne Wodey
9b03a365ed
language/environment: cast argument processor default values early
...
Fixes #1434 . Also add unit tests for some argument processors.
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2020-04-04 15:37:04 +08:00
4a8d361ace
soc: optimize programmable identifier
2020-03-12 23:09:13 +08:00
9e66dd7075
soc: reprogrammable identifier
2020-03-12 22:23:08 +08:00
380de177e7
rtio: fix wide output after RTIO refactoring
...
fixes 3d0c3cc1cf
2020-03-05 17:55:27 +00:00
e803830b3b
fastino: support wide RTIO interface and channel groups
2020-03-05 17:55:04 +00:00
8451e58fbe
ad9912: fix ftw width docstring
2020-02-27 02:11:12 +08:00
Paweł K
2a909839ff
artiq_flash: added option of specifying another username when connecting through SSH. ( #1429 )
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2020-02-19 19:44:11 +08:00
6d26def3ce
sayma: drive filtered_clk_sel on master variant
2020-02-06 22:28:49 +08:00
52ec849008
sayma: fix sysref_delay_dac
2020-02-05 19:04:01 +08:00
c7de1f2e6b
metlino: drive clock muxes
2020-02-05 00:06:34 +08:00
bf9f4e380a
si5324: program I2C mux on Metlino
2020-02-03 18:07:59 +08:00
ffb24e9fff
artiq_flash: use correct proxy bitstream for Metlino
2020-02-03 18:07:26 +08:00
5f8e20b1a1
artiq_sinara_tester: fix device_db filename
2020-01-31 10:26:58 +08:00
dfa033eb87
wrpll: new collector from Weida/Tom
2020-01-24 10:31:52 +08:00
dee16edb78
wrpll: DDMTD sampler double latching
2020-01-22 19:16:26 +08:00
f4d8f77268
turn kasli_tester into a frontend tool
2020-01-21 16:13:04 +08:00
bfcbffcd8d
update smoltcp
...
This disables the 'log' features which does not compile, and may break net_trace. To be investigated later.
2020-01-21 13:58:23 +08:00
82cdb7f933
typo
2020-01-21 10:07:13 +08:00
248230a89e
fastino: style
2020-01-20 13:25:00 +01:00
c45a872cba
fastino: fix init, set_cfg
2020-01-20 13:25:00 +01:00
2c4e5bfee4
fastino: add [WIP]
2020-01-20 13:25:00 +01:00
8f9948a1ff
kasli_sawgmaster: add basemod programming example
2020-01-20 20:14:24 +08:00
e427aaaa66
basemod_att: fix imports
2020-01-20 20:14:24 +08:00
62a52cb086
sayma: do not pollute the log with DAC status on success
2020-01-20 20:14:24 +08:00
6b428ef3be
sayma: initialize DAC before testing jesd::ready
2020-01-20 20:14:24 +08:00
7ab0282234
adf5355: style
2020-01-20 13:13:08 +01:00
9368c26d1c
mirny: add to manual
2020-01-20 13:13:08 +01:00
Etienne Wodey
da531404e8
artiq_ddb_template: add Mirny support
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2020-01-20 13:13:08 +01:00
01a6e77d89
mirny: add
...
* This targets unrelease CPLD gateware (https://github.com/quartiq/mirny/issues/1 )
* includes initial coredevice driver, eem shims, and kasli_generic tooling
* addresses the ARTIQ side of #1130
* Register abstraction to be written
Signed-off-by: Robert Jördens <rj@quartiq.de>
2020-01-20 13:13:08 +01:00
ec03767dcf
sayma: improve DAC status report
2020-01-20 18:22:06 +08:00
5c299de3b4
sayma: print DAC status on JESD not ready error
2020-01-20 18:21:29 +08:00
45efee724e
sayma: add JESD204 PHY done diagnostics
2020-01-20 12:47:31 +08:00
6c3e71a83a
wrpll: cleanup
2020-01-18 09:43:43 +08:00
344f8bd12a
wrpll: collector patch from Weida
2020-01-18 09:42:58 +08:00
833f428391
sayma: fix hmc542 to/from mu
2020-01-16 09:10:32 +08:00
6c948c7726
sayma: RF switch control is active-low on Basemod, invert
2020-01-16 08:59:52 +08:00
50302d57c0
wrpll: more careful I2C timing
2020-01-14 20:03:46 +08:00
105dd60c78
wrpll: ADPLLProgrammer mini test bench and fixes
2020-01-14 16:52:25 +08:00
3242e9ec6c
wrpll: loop test
2020-01-13 22:31:57 +08:00
8ec0f2e717
wrpll: implement ADPLLProgrammer
2020-01-13 22:30:11 +08:00
d5895b8999
wrpll: adpll -> set_adpll
2020-01-13 20:46:36 +08:00
e7ef23d30c
wrpll: use CONFIG_CLOCK_FREQUENCY and rtio_frequency in trim_dcxos
2020-01-13 20:44:15 +08:00
ea3bce6fe3
wrpll: wait for settling time after setting ADPLL
2020-01-13 20:43:34 +08:00
d685619bcd
wrpll: collector code modifications from Weida
2020-01-13 20:42:41 +08:00
9d7196bdb7
update copyright year
2020-01-13 19:33:44 +08:00
e87d864063
wrpll: print ADPLL offsets
2020-01-13 19:32:30 +08:00
8edbc33d0e
wrpll: calculate initial ADPLL offsets
2020-01-13 19:29:10 +08:00
9dd011f4ad
firmware: remove bitrotten Sayma code
2020-01-13 18:47:54 +08:00
583a18dd5f
firmware: expose fmod to kernels. Closes #1417
2020-01-10 14:33:02 +08:00
David Nadlinger
d8c81d6d05
compiler: Other types microoptimisations
...
Interestingly enough, these actually seem to give a measurable
speedup (if small – about 1% improvement out of 6s whole-program
compile-time in one particular test case).
The previous implementation of is_mono() had also interesting
behaviour if `name` wasn't given; it would test only for the
presence of any keys specified via keyword arguments,
disregarding their values. Looking at uses across the current
ARTIQ codebase, I could neither find a case where this would
have actually been triggered, nor any rationale for it.
With the short-circuited implementation from this commit,
is_mono() now checks name/all of params against any specified
conditions.
2020-01-01 08:49:19 +00:00
David Nadlinger
2c34f0214b
compiler: Short-circuit Type.unify() with identical other type
...
This considerably improves performance; ~15% in terms of total
artiq_run-to-kernel-compiled duration in one test case.
2020-01-01 08:49:19 +00:00
eebae01503
artiq_client: add back quiet-verbose args for submission
...
close #1416
regression introduced in 3fd6962
2019-12-31 13:00:26 +01:00
3f32d78c0e
wrpll: simple ADPLL test
2019-12-31 12:12:29 +08:00
bb04b082a7
wrpll: clarify comment
2019-12-31 12:12:29 +08:00
David Nadlinger
1e864b7e2d
coredevice/suservo: Add separate methods for setting only the IIR offset
2019-12-30 20:02:22 +00:00
a666766f38
wrpll: add ADPLL offset registers
2019-12-30 22:19:42 +08:00
5c6e394928
ddmtd: add collector
2019-12-30 22:17:44 +08:00
642a305c6a
wrpll: remove unnecessary delay
...
Counting now happens in the sys domain with no CDC between counter and CPU.
2019-12-30 20:01:06 +08:00
f57f235dca
wrpll: new frequency meter
...
As per Mattermost discussion with Tom.
2019-12-30 19:47:57 +08:00
9e15ff7e6a
wrpll: improve DDMTD deglitcher
2019-12-30 16:56:06 +08:00
dfad27125e
runtime: relax/fix TCP keepalive settings ( #1125 )
2019-12-23 19:58:10 +08:00
b5e1bd3fa2
coredevice: simplify/cleanup network connection code
...
This removes:
* host-side keepalive, which turns out not to be required
* custom connection timeout (the default is OK)
* SSH tunneling support (doesn't seem to be actually used anywhere)
2019-12-23 19:53:49 +08:00
David Nadlinger
af31c6ea21
coredevice: Don't use is to compare with integer literal
...
This works on CPython, but is not guaranteed to do so, and
produces a warning since 3.8 (see https://bugs.python.org/issue34850 ).
2019-12-22 05:46:41 +00:00
fb2076a026
basemod_att: add dB functions, document
2019-12-21 14:56:41 +08:00
b2480f0edc
artiq_flash: update actions documentation
2019-12-21 14:18:28 +08:00
d4e039cede
basemod: add coredevice driver
2019-12-21 14:18:10 +08:00
106d25b32a
kasli_sawgmaster: fix drtio_is_up
2019-12-21 14:17:52 +08:00
8759c8d360
shiftreg: fix get method
2019-12-21 14:17:22 +08:00
c3030f4ffb
kasli_sawgmaster: update device_db for BaseMod
2019-12-20 19:59:15 +08:00
cab8c8249e
coredevice/shiftreg: add get method
2019-12-20 18:58:50 +08:00
b7f1623197
sayma_rtm: connect attenuator shift registers in series
2019-12-20 18:58:31 +08:00
c5137eeb62
firmware: remove legacy hmc542 code
2019-12-20 15:25:55 +08:00
1c9cbe6285
sayma_rtm: add basemod attenuators on RTIO
2019-12-20 15:25:55 +08:00
David Nadlinger
8f518c6b05
compiler: Allow None in type hints
...
Similar to how Python itself interprets None as type(None),
make it translate to TNone in ARTIQ compiler type hints.
2019-12-19 09:36:45 +08:00
David Nadlinger
594ff45750
compiler: Revert support for None as TNone
...
This was mistakenly included in fb2b634c4a
2019-12-18 13:23:40 +00:00
David Nadlinger
fb2b634c4a
compiler, language: Implement @kernel_from_string
...
With support for polymorphism (or type erasure on pointers to
member functions) being absent in the ARTIQ compiler, code
generation is vital to be able to implement abstractions that
work with user-provided lists/trees of objects with uniform
interfaces (e.g. a common base class, or duck typing), but
different concrete types.
@kernel_from_string has been in production use for exactly
this use case in Oxford for the better part of a year now
(various places in ndscan).
GitHub: Fixes #1089 .
2019-12-18 10:51:04 +08:00
6ee15fbcae
sayma_rtm: basemod RF switches
2019-12-18 10:33:29 +08:00
David Nadlinger
d3508b014f
firmware: Add whitespace between panic handler location and message
2019-12-17 19:59:59 +00:00
David Nadlinger
0279a60a55
examples: Add README
...
This will be displayed by GitHub below the directory listing, and was
inspired by observing new users disregard the examples/ tree entirely
(even though the experiments and device DBs within would have cleared
up their getting-started confusion) due to the perceived complexity
wall induced by the wealth of subdirectories.
2019-12-17 13:35:19 +00:00
8d13aeb96c
test: run test_help for browser and dashboard
2019-12-12 10:34:58 +08:00
ac09f3a5da
artiq_browser: fix command line argument handling. Closes #1404
2019-12-11 16:18:56 +08:00
52112d54f9
kasli_generic: expose peripheral_processors dictionary. Closes #1403
2019-12-10 10:30:06 +08:00
6f52540569
wrpll: fix previous commit
2019-12-09 20:13:55 +08:00
13486f3acf
wrpll: swap helper/main si549 frequencies
2019-12-09 19:49:34 +08:00
150a02117c
sayma_rtm: drive clk_src_ext_sel
2019-12-09 19:47:50 +08:00
307a6ca140
gth_ultrascale: make OBUFDS_GTE3 work
...
https://www.xilinx.com/support/answers/67919.html
2019-12-09 18:13:22 +08:00
4919fb8765
wrpll: print DDMTD helper tags
2019-12-09 17:39:22 +08:00
0d4eccc1a5
wrpll: improve debug output
2019-12-09 17:23:09 +08:00
f633c62e8d
wrpll: speed up si549 i2c access
2019-12-09 17:22:58 +08:00
14e09582b6
wrpll: work around si549 not working when lsdiv=2
2019-12-09 16:20:08 +08:00
439576f59d
wrpll: fix Si549 initialization delays
2019-12-09 16:13:57 +08:00
2b5213b013
wrpll: constrain clocks
2019-12-09 12:26:44 +08:00
05e2e1899a
wrpll: update OBUFDS_GTE2 comment
...
Seems O can fan out simultaneously to transceiver and fabric.
Kasli is using ODIV2 for no particular reason.
2019-12-09 11:58:54 +08:00
4148efd2ee
wrpll: implement filters and connect to Si549
2019-12-09 11:47:29 +08:00
d43fe644f0
wrpll: stabilize DDMTDSamplerGTP
2019-12-09 11:47:14 +08:00
0499f83580
wrpll: helper clock sanity check
2019-12-08 23:46:33 +08:00
46a776d06e
sayma: introduce WRPLL on RTM
2019-12-08 15:30:00 +08:00
f35f658bc5
artiq_flash: rework RTM management
2019-12-08 15:29:31 +08:00
bcd061f141
artiq_flash: RTM is a regular DRTIO satellite, can be used with all variants
2019-12-08 15:12:04 +08:00
883310d83e
sayma_rtm: si5324 -> cdrclkc
2019-12-08 14:26:05 +08:00
57a5bea43a
sayma_rtm: support setting RTIO frequency
2019-12-08 11:45:31 +08:00
da9237de53
wrpll: support differential DDMTD inputs
2019-12-07 18:18:57 +08:00
Paweł Kulik
3851a02a3a
Added option of flashing only RTM gateware.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:31:19 +08:00
Paweł Kulik
14e250c78f
Enabled internal pullup for CML SYSREF outputs, otherwise there is no signal on them.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:30:24 +08:00
7098854b0f
wrpll: share DDMTD counter
2019-12-04 19:05:56 +08:00
05c5fed07d
suservo: stray comma
2019-12-03 08:38:07 +00:00
56074cfffa
suservo: support operating with one urukul
...
implemented by wiring up the second Urukul to dummy pins
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-12-02 11:30:20 +01:00
86e1924493
kasli_generic: support external reference on masters
2019-11-30 07:34:41 +00:00
eb271f383b
wrpll: add DDMTD cores
2019-11-28 22:03:50 +08:00
39d5ca11f4
si549: increase I2C frequency
2019-11-28 22:03:26 +08:00
87894102e5
si549: use recommended i2c read sequence
2019-11-28 17:49:02 +08:00
2e55e39ac7
wrpll: use spaces to indent
2019-11-28 17:40:25 +08:00
354d82cfe3
wrpll: drive helper clock domain
2019-11-28 17:40:00 +08:00
4a03ca928d
artiq_flash: sayma fixes
2019-11-28 17:38:29 +08:00
68cab5be8c
si549: cleanups
2019-11-28 16:36:59 +08:00
bcd2383c9d
wrpll: si549 initialization
2019-11-27 22:58:08 +08:00
4832bfb08c
wrpll: i2c functions, select_recovered_clock placeholder
2019-11-27 21:21:00 +08:00
449d2c4f08
libboard_misoc: fix !has_i2c
2019-11-27 21:04:28 +08:00
e0687b77f5
si5324: 10 MHz ext_ref_frequency
...
* close #1254
* tested on innsbruck2 kasli variant
* sponsored by Uni Innsbruck/AQT
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-11-22 18:29:12 +01:00
c536f6c4df
sayma_amc: output ddmtd_rec_clk
2019-11-20 19:16:04 +08:00
ae50da09c4
drtio/gth_ultrascale: support OBUFDS_GTE3
2019-11-20 19:15:50 +08:00
fe0c324b38
sayma: integrate si549 core
2019-11-20 17:37:16 +08:00
fa41c946ea
wrpll: si549 fixes
2019-11-20 17:04:24 +08:00
c5dbab1929
gateware: move wrpll to drtio
2019-11-20 14:43:08 +08:00
gthickman
56d4b70e01
ad9910 osk ( #1387 )
...
* updated adoo10.py for RAM mode frequency control
* updated docstrings for set_cfr1() in ad9910.py
* fixed typo in ad9910.py
* added docstrings to ad9910.py
* removed OSK-related changes in AD9910, to be included in a separate branch.
* updated AD9910 set_cfr1 for control of OSK mode parameters
* updated AD9910 set_cfr1() for control of OSK mode parameters.
2019-11-18 15:57:26 +01:00
Fabian Schmid
f73e2a3d30
doc: clarify urukul attenuator behavior
...
Closes #1386
Signed-off-by: Fabian Schmid <fabian.schmid@mpq.mpg.de>
2019-11-18 15:56:00 +01:00
3adc799785
update GUI background
2019-11-15 13:49:09 +08:00
db13747279
fix device_db alias corner case bugs. Closes #1140
2019-11-14 16:22:45 +08:00
4707aef45c
split out artiq-comtools
2019-11-14 15:21:51 +08:00
4416378d21
frontend: add --version to common tools
2019-11-14 11:42:31 +08:00
Garrett
f8a7e278b8
removed OSK-related changes in AD9910, to be included in a separate branch.
2019-11-12 19:07:05 +01:00
Garrett
3a19ba7e62
added docstrings to ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
4ad3651022
fixed typo in ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
6d34eb3bb0
updated docstrings for set_cfr1() in ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
61ca46ec3f
updated adoo10.py for RAM mode frequency control
2019-11-12 19:07:05 +01:00
fd7081830c
remove fire_and_forget (moved to sipyco)
2019-11-12 19:43:04 +08:00
3fd6962bd2
use sipyco ( #585 )
2019-11-10 15:55:17 +08:00
6644903843
bootloader: fix imports
2019-11-06 14:45:55 +08:00
5279bc275a
urukul: rework EEPROM synchronization. Closes #1372
2019-11-05 18:56:10 +08:00
David Nadlinger
bc3b55b1a8
gateware/eem: Force IOB=TRUE on Urukul SYNC output
...
Without this, the final register in the SYNC signal TTLClockGen
isn't (always) placed in the I/O tile, leading to more jitter
than necessary, and causing "double window" artefacts. See
sinara-hw/Urukul#16 for more details.
(Patch based on work by Weida Zhang, testing by various members
of the community in Oxford and elsewhere.)
2019-11-05 17:14:07 +08:00
b25a17fa37
netboot: support slave FPGA loading
2019-11-05 16:28:49 +08:00
307f39e900
remoting: fix multiuser access. Closes #1383
2019-11-05 15:46:07 +08:00
9dc82bd766
bootloader: add no_flash_boot config option to force network boot
2019-11-05 15:31:08 +08:00
e2f9f59472
artiq_flash: fix flashing Sayma RTM from package
2019-11-05 15:19:01 +08:00
98854473dd
sayma_amc: use all transceivers on master ( #1230 )
2019-11-02 12:12:32 +08:00
29b4d87943
firmware: add cargosha256.nix
2019-11-01 10:28:41 +08:00
5362f92b39
bootloader: disable minimum stack space check in linker script
...
* The value varies greatly whether netboot is enabled or not.
* There is no simple solution to detect has_ethmac in the linker script and set the value accordingly.
* The space check is an imperfect solution that will be superseded by stack pointer limits.
* Left commented out so we can re-enable it manually during development if stack corruption is suspected.
2019-11-01 10:25:14 +08:00
deadfead2a
bootloader: fix !has_ethmac
2019-11-01 10:19:08 +08:00
42af76326f
kasli: enlarge integrated CPU SRAM for DRTIO masters
...
Required by the bootloader netboot support.
2019-11-01 10:15:13 +08:00
a78e493b72
firmware: load slave FPGA in bootloader
2019-10-31 12:42:40 +08:00
389a8f587a
slave_fpga: modularize
2019-10-31 11:50:53 +08:00
9a35a2ed81
test_frontends: update
2019-10-30 22:02:16 +08:00
bc050fdeec
bootloader: treat zero-length firmware in flash as no firmware
2019-10-30 21:46:06 +08:00
228e44a059
sayma: enable Ethernet on DRTIO satellite variant
...
So that netboot can be used in bootloader.
2019-10-30 21:39:00 +08:00
dc71039934
sayma, metlino: increase integrated_sram_size on Ethernet-enabled variants
2019-10-30 21:36:00 +08:00
3042476230
artiq_netboot: remove unnecessary import
2019-10-30 21:29:33 +08:00
c96de7454d
remove artiq_devtool
2019-10-30 21:27:24 +08:00
88dbff46f4
add netboot tool
2019-10-30 21:24:51 +08:00
462cf5967e
bootloader: add netboot support
2019-10-30 21:23:42 +08:00
1f15e55021
comm_analyzer: don't assume every message has data
...
close #1377
2019-10-28 15:35:44 +01:00
David Nadlinger
611bcc4db4
compiler: Cache expensive target data layout queries
...
On one typical experiment, this shaves about 3 seconds (~25%)
off the overall kernel compilation time.
GitHub: Closes #1370 .
2019-10-28 11:09:25 +00:00
David Nadlinger
5d7f22ffa4
compiler: Remove provision for unused four-parameter llptr_to_var() form [nfc]
...
`var_type` was presumably intended to convert to a target type,
but wasn't actually acted on in the function body (nor was it
used anywhere in the codebase).
2019-10-28 11:02:46 +00:00
f2f7170d20
hmc7043: use recommend I/O standards
...
https://github.com/sinara-hw/Sayma_RTM/issues/116#issuecomment-544187952
2019-10-21 22:56:10 +08:00
47a83c71f1
firmware: more readable network addresses message
2019-10-21 14:00:14 +08:00
818d6b2f5a
bootloader: fix compilation problems
2019-10-21 13:28:17 +08:00
8f76a3218e
firmware: move i2c to libboard_misoc, enable IPv6 in bootloader, share network settings
2019-10-21 12:58:52 +08:00
1c5e749036
satman: remove compilation warning without JESD DACs
2019-10-21 12:53:54 +08:00
d26d80410e
runtime: refactor network settings
2019-10-19 17:56:35 +08:00
6d5dcb4211
runtime: enable IPv6. Closes #349
2019-10-19 17:20:33 +08:00
05e8f24c24
sayma2: JESD204 synchronization
2019-10-18 23:28:47 +08:00
62b49882b9
examples/kc705: fix dds_test
2019-10-17 07:37:00 +08:00
a8f85860c4
coreanalyzer: AD9914 fixes ( #1376 )
2019-10-17 07:29:33 +08:00
d42ff81144
examples/sayma_master: update device_db
2019-10-16 18:49:25 +08:00
8fa3c6460e
sayma_amc: set direction of external TTL buffer according to RTIO PHY OE
2019-10-16 18:48:50 +08:00
37d0a5dc19
rtio/ttl: expose OE
2019-10-16 18:48:20 +08:00
bc060b7f01
style
2019-10-16 18:18:11 +08:00
40d64fc782
sayma: remove standalone examples (no longer supported)
2019-10-16 17:54:39 +08:00
21a1c6de3f
sayma: use SFP0 for DRTIO master
2019-10-16 17:53:40 +08:00
6cf06fba7b
examples: use default IP addresses for boards
2019-10-16 16:18:30 +08:00
314d9b5d06
kasli: default to 125MHz frequency for DRTIO
...
This is the consistent and most common option. Sayma will also eventually move to it.
2019-10-08 12:59:52 +08:00
4df2c5d1fb
sayma: prepare for SYSREF align
...
We will try DDMTD on the AMC first, as this is simpler and perhaps will work on v2 after the power supply fixes.
2019-10-08 12:30:47 +08:00
5ee81dc643
satman: define constants for JdacBasicRequest reqnos
2019-10-08 10:27:04 +08:00
4b3baf4825
firmware: run PRBS and STPL JESD204 tests
2019-10-08 00:10:36 +08:00
03007b896e
sayma_amc: sma -> mcx
2019-10-07 20:31:35 +08:00
ebd5d890f1
satman: check for JESD ready
2019-10-06 23:10:57 +08:00
90e3b83e80
hmc7043: turn on AMC_FPGA_SYSREF1
...
Florent's JESD core won't work at all without.
2019-10-06 22:49:00 +08:00
97a0dee3e8
jesd204: remove ibuf_disable
...
We use the MOSFET to mute the HMC7043 noise on hardware v2 instead.
2019-10-06 22:26:31 +08:00
1bc7743e03
sayma: fix hmc7043 output settings for v2 hardware
2019-10-06 21:50:29 +08:00
a421820a32
sayma: initialize DACs over DRTIO
2019-10-06 21:42:45 +08:00
f8e4cc37d0
sayma_rtm: reset and detect DACs
2019-10-06 20:15:27 +08:00
f62dc7e1d4
sayma: refactor JESD DAC channel groups
2019-10-06 20:15:09 +08:00
c4c884b8ce
ad9154: simplify, focus on AD9154 config and do not include JESD
2019-10-06 20:07:02 +08:00
fdba0bfbbc
satman: move now-unrelated hmc830_7043 init away from DRTIO transceiver init
2019-10-06 19:22:46 +08:00
1c6c22fde9
sayma_amc: HMC830_REF moved to RTM side
2019-10-06 18:15:37 +08:00
ad63908aff
hmc830_7043: enable_fpga_ibuf -> unmute
2019-10-06 18:13:59 +08:00
5ad65b9d30
hmc830_7043: remove clock_mux
2019-10-06 18:13:27 +08:00
e6ff44301b
sayma_amc: cleanup (v2.0 only)
2019-10-06 18:11:43 +08:00
e9b81f6e33
remove serwb
...
DRTIO is a better solution
2019-10-06 18:10:23 +08:00
7cd02d30b7
sayma_rtm_drtio: replace sayma_rtm
2019-10-06 17:59:53 +08:00
b3b85135a3
sayma_rtm_drtio: add DDMTD core, move specific cores out of SatelliteBase
2019-10-06 17:59:11 +08:00
346c985347
sayma_rtm_drtio: use artiq_sayma folder
2019-10-06 17:30:08 +08:00
e2a924449d
artiq_flash: use DRTIO RTM gateware
2019-10-06 17:28:14 +08:00
4198033657
sayma_rtm_drtio: cleanup (v2.0 only)
2019-10-06 16:42:34 +08:00
5612b31860
sayma_rtm_drtio: add HMC clock chip and DAC control
2019-10-06 16:15:24 +08:00
a8cf4c2b18
sayma_rtm: hwrev v2.0 by default
2019-10-06 13:25:30 +08:00
1bc5d44a7c
artiq_flash: do not flash RTM gateware on Sayma variants that don't need it
2019-10-06 13:15:50 +08:00
bb5ff46f7d
Merge branch 'wrpll'
2019-10-05 10:24:11 +08:00
7b95814cf5
sayma_amc: refactor, add SimpleSatellite variant
2019-10-05 10:24:06 +08:00
58b7bdcecc
sayma_amc: refactor RTM FPGA code
2019-10-05 10:24:06 +08:00
96fc4a21e8
sayma_amc: remove dummy FPGA pin assignment testing code
2019-10-05 10:24:06 +08:00
Tim Ballance
ada3b39f4e
Fix ad9910 ram mode asf scale error in polar mode
2019-10-04 20:14:41 +02:00
Tim Ballance
448080e71d
Fix ad9910 ram mode asf scale error
...
RAM mode amplitude to ASF conversion should be << 18 rather than << 16
2019-10-04 20:14:41 +02:00
6aa68e1715
sayma_rtm2: select filtered clock from Si5324
2019-10-04 22:56:16 +08:00
6cb0f5de59
sayma_amc: enable DRTIO switching
2019-10-04 22:55:23 +08:00
0cf8a46bbd
sayma_amc2: select filtered clock from Si5324
2019-10-04 21:28:26 +08:00
6f533727cb
artiq_flash: use regular bscan_spi_xcku040 for Sayma
...
The modified version is no longer necessary on v2 boards, and breaks flash bank 1.
2019-10-04 17:50:45 +08:00
4c1fe1de0d
environment: implement HasEnvironment.call_child_method ( #1366 )
2019-09-30 23:58:36 +08:00
Charles Baynham
0b1fb255a9
tools: Wrap Task _do() calls in a generic exception handler
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2019-09-20 23:00:59 +08:00
Charles Baynham
e50a6d5aaf
worker_impy: ignore newline at start of experiment docstring
2019-09-20 22:10:49 +08:00
f0e87d2e59
grabber: remove unused code
2019-09-20 15:26:12 +02:00
4e77be0511
firmware: add Cargo.lock header that newer cargo wants
2019-09-17 15:22:14 +08:00
Charles Baynham
b7abf2fb53
pyon: Handle inf in decoding
2019-09-12 09:46:05 +08:00
38fca01189
artiq_ddb_template: add su-servo support ( #1343 )
2019-09-11 15:52:25 +08:00
991c686d72
kasli_generic,eem: print RTIO channels in hex like artiq_ddb_template
2019-09-11 15:51:53 +08:00
f4dd7e5e29
kasli_tester: init urukul channel before calibrating
...
Otherwise the DDS is not initialized and with a cold system it fails to
find IO_UPDATE edges.
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-09-11 07:16:35 +00:00
7492a59f6d
kasli_generic: add SUServo support ( #1343 )
2019-09-11 11:12:48 +08:00
David Nadlinger
6d6f66338b
runtime: Update core config panic_reset command suggestion message
2019-09-10 19:31:19 +01:00
Charles Baynham
ddd34e5a9c
influx_schedule: log repo_rev along with other info
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2019-09-10 13:46:28 +02:00
98caaebade
consistent use of 'class name' terminology to select a class within an experiment file. Closes #1348
2019-09-09 15:16:33 +08:00
21021beb08
kasli: remove opticlock (moved to kasli_generic)
2019-09-09 15:03:10 +08:00
436662be52
ddb_template: add Novogorny support
2019-09-09 15:00:45 +08:00
69c2acd9d7
ddb_template: sampler cnv is ttl not spi
2019-09-09 14:57:42 +08:00
cfb5ef5548
kasli_generic: add Novogorny support
2019-09-09 14:54:34 +08:00
0b9168994f
Revert "dashboard: Sort TTL moninj channels by name"
...
This reverts commit b3db3ea6fcCloses #1288
2019-09-06 11:17:10 +08:00
Charles Baynham
d31f30a436
influxdb_schedule: fix typo in parameter name
2019-09-05 17:42:56 +02:00
Charles Baynham
7ac8feea19
influxdb_schedule: Handle all exceptions
2019-09-05 17:42:56 +02:00
1fb317778a
eem/grabber: allow third EEM to be specified
2019-08-29 18:58:12 +08:00
90e8e074cd
firmware: turn errors into &str for remote_i2c as well
...
should resolve breakage on a few targets/variants introduced by PR #1351
2019-08-29 09:05:47 +08:00
71b3c66af9
firmware: conditionally compile has_si5324
...
avoids unused warnings where this module is not used.
2019-08-29 09:04:54 +08:00
959679d8b7
wrpll: add I2CMasterMachine
2019-08-27 18:02:05 +08:00
c03c35f375
Revert "compiler: armv7-unknown-linux-gnueabihf -> armv7-linux-gnueabihf"
...
rustc insists on -unknown.
This reverts commit cf47fa44d8
2019-08-26 11:23:00 +08:00
cf47fa44d8
compiler: armv7-unknown-linux-gnueabihf -> armv7-linux-gnueabihf
2019-08-26 11:12:49 +08:00
98cd9a539c
compiler: support Cortex A9 target
2019-08-26 10:46:22 +08:00
afe162ceca
firmware: don't unwrap() but propagate pca9548 errors
2019-08-17 09:15:26 +08:00
a8aabd3815
firwmare: turn i2c errors into &str
2019-08-17 09:15:26 +08:00
8fc5ce902f
firmware: let kasli obtain default hardware_addr from i2c_eeprom
2019-08-17 09:15:26 +08:00
d666f3d573
firmware: factor out mod pca9548 from si5324
...
orepares for further i2c devices.
2019-08-17 09:15:26 +08:00
1fd2322662
wrpll/thls: implement global writeback
2019-08-15 23:16:17 +08:00
24082b687e
wrpll/filters: clean up and make compatible with thls
2019-08-15 17:58:22 +08:00
9331fafab0
wrpll/filters: new code from Weida
2019-08-15 17:24:40 +08:00
5c3974c265
wrpll/thls: fix opcode decoding
2019-08-15 17:12:48 +08:00
19620948bf
wrpll/thls: implement signed numbers
2019-08-15 17:04:17 +08:00
efc43142a6
wrpll/thls: implement min/max
2019-08-15 16:42:59 +08:00
44969b03ad
wrpll/thls: rework instruction decoding
2019-08-15 15:55:13 +08:00
