David Nadlinger
1e864b7e2d
coredevice/suservo: Add separate methods for setting only the IIR offset
2019-12-30 20:02:22 +00:00
a666766f38
wrpll: add ADPLL offset registers
2019-12-30 22:19:42 +08:00
5c6e394928
ddmtd: add collector
2019-12-30 22:17:44 +08:00
642a305c6a
wrpll: remove unnecessary delay
...
Counting now happens in the sys domain with no CDC between counter and CPU.
2019-12-30 20:01:06 +08:00
f57f235dca
wrpll: new frequency meter
...
As per Mattermost discussion with Tom.
2019-12-30 19:47:57 +08:00
9e15ff7e6a
wrpll: improve DDMTD deglitcher
2019-12-30 16:56:06 +08:00
dfad27125e
runtime: relax/fix TCP keepalive settings ( #1125 )
2019-12-23 19:58:10 +08:00
b5e1bd3fa2
coredevice: simplify/cleanup network connection code
...
This removes:
* host-side keepalive, which turns out not to be required
* custom connection timeout (the default is OK)
* SSH tunneling support (doesn't seem to be actually used anywhere)
2019-12-23 19:53:49 +08:00
David Nadlinger
af31c6ea21
coredevice: Don't use is to compare with integer literal
...
This works on CPython, but is not guaranteed to do so, and
produces a warning since 3.8 (see https://bugs.python.org/issue34850 ).
2019-12-22 05:46:41 +00:00
fb2076a026
basemod_att: add dB functions, document
2019-12-21 14:56:41 +08:00
b2480f0edc
artiq_flash: update actions documentation
2019-12-21 14:18:28 +08:00
d4e039cede
basemod: add coredevice driver
2019-12-21 14:18:10 +08:00
106d25b32a
kasli_sawgmaster: fix drtio_is_up
2019-12-21 14:17:52 +08:00
8759c8d360
shiftreg: fix get method
2019-12-21 14:17:22 +08:00
c3030f4ffb
kasli_sawgmaster: update device_db for BaseMod
2019-12-20 19:59:15 +08:00
cab8c8249e
coredevice/shiftreg: add get method
2019-12-20 18:58:50 +08:00
b7f1623197
sayma_rtm: connect attenuator shift registers in series
2019-12-20 18:58:31 +08:00
c5137eeb62
firmware: remove legacy hmc542 code
2019-12-20 15:25:55 +08:00
1c9cbe6285
sayma_rtm: add basemod attenuators on RTIO
2019-12-20 15:25:55 +08:00
David Nadlinger
8f518c6b05
compiler: Allow None in type hints
...
Similar to how Python itself interprets None as type(None),
make it translate to TNone in ARTIQ compiler type hints.
2019-12-19 09:36:45 +08:00
David Nadlinger
594ff45750
compiler: Revert support for None as TNone
...
This was mistakenly included in fb2b634c4a
2019-12-18 13:23:40 +00:00
David Nadlinger
fb2b634c4a
compiler, language: Implement @kernel_from_string
...
With support for polymorphism (or type erasure on pointers to
member functions) being absent in the ARTIQ compiler, code
generation is vital to be able to implement abstractions that
work with user-provided lists/trees of objects with uniform
interfaces (e.g. a common base class, or duck typing), but
different concrete types.
@kernel_from_string has been in production use for exactly
this use case in Oxford for the better part of a year now
(various places in ndscan).
GitHub: Fixes #1089 .
2019-12-18 10:51:04 +08:00
6ee15fbcae
sayma_rtm: basemod RF switches
2019-12-18 10:33:29 +08:00
David Nadlinger
d3508b014f
firmware: Add whitespace between panic handler location and message
2019-12-17 19:59:59 +00:00
David Nadlinger
0279a60a55
examples: Add README
...
This will be displayed by GitHub below the directory listing, and was
inspired by observing new users disregard the examples/ tree entirely
(even though the experiments and device DBs within would have cleared
up their getting-started confusion) due to the perceived complexity
wall induced by the wealth of subdirectories.
2019-12-17 13:35:19 +00:00
8d13aeb96c
test: run test_help for browser and dashboard
2019-12-12 10:34:58 +08:00
ac09f3a5da
artiq_browser: fix command line argument handling. Closes #1404
2019-12-11 16:18:56 +08:00
52112d54f9
kasli_generic: expose peripheral_processors dictionary. Closes #1403
2019-12-10 10:30:06 +08:00
6f52540569
wrpll: fix previous commit
2019-12-09 20:13:55 +08:00
13486f3acf
wrpll: swap helper/main si549 frequencies
2019-12-09 19:49:34 +08:00
150a02117c
sayma_rtm: drive clk_src_ext_sel
2019-12-09 19:47:50 +08:00
307a6ca140
gth_ultrascale: make OBUFDS_GTE3 work
...
https://www.xilinx.com/support/answers/67919.html
2019-12-09 18:13:22 +08:00
4919fb8765
wrpll: print DDMTD helper tags
2019-12-09 17:39:22 +08:00
0d4eccc1a5
wrpll: improve debug output
2019-12-09 17:23:09 +08:00
f633c62e8d
wrpll: speed up si549 i2c access
2019-12-09 17:22:58 +08:00
14e09582b6
wrpll: work around si549 not working when lsdiv=2
2019-12-09 16:20:08 +08:00
439576f59d
wrpll: fix Si549 initialization delays
2019-12-09 16:13:57 +08:00
2b5213b013
wrpll: constrain clocks
2019-12-09 12:26:44 +08:00
05e2e1899a
wrpll: update OBUFDS_GTE2 comment
...
Seems O can fan out simultaneously to transceiver and fabric.
Kasli is using ODIV2 for no particular reason.
2019-12-09 11:58:54 +08:00
4148efd2ee
wrpll: implement filters and connect to Si549
2019-12-09 11:47:29 +08:00
d43fe644f0
wrpll: stabilize DDMTDSamplerGTP
2019-12-09 11:47:14 +08:00
0499f83580
wrpll: helper clock sanity check
2019-12-08 23:46:33 +08:00
46a776d06e
sayma: introduce WRPLL on RTM
2019-12-08 15:30:00 +08:00
f35f658bc5
artiq_flash: rework RTM management
2019-12-08 15:29:31 +08:00
bcd061f141
artiq_flash: RTM is a regular DRTIO satellite, can be used with all variants
2019-12-08 15:12:04 +08:00
883310d83e
sayma_rtm: si5324 -> cdrclkc
2019-12-08 14:26:05 +08:00
57a5bea43a
sayma_rtm: support setting RTIO frequency
2019-12-08 11:45:31 +08:00
da9237de53
wrpll: support differential DDMTD inputs
2019-12-07 18:18:57 +08:00
Paweł Kulik
3851a02a3a
Added option of flashing only RTM gateware.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:31:19 +08:00
Paweł Kulik
14e250c78f
Enabled internal pullup for CML SYSREF outputs, otherwise there is no signal on them.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:30:24 +08:00
7098854b0f
wrpll: share DDMTD counter
2019-12-04 19:05:56 +08:00
05c5fed07d
suservo: stray comma
2019-12-03 08:38:07 +00:00
56074cfffa
suservo: support operating with one urukul
...
implemented by wiring up the second Urukul to dummy pins
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-12-02 11:30:20 +01:00
86e1924493
kasli_generic: support external reference on masters
2019-11-30 07:34:41 +00:00
eb271f383b
wrpll: add DDMTD cores
2019-11-28 22:03:50 +08:00
39d5ca11f4
si549: increase I2C frequency
2019-11-28 22:03:26 +08:00
87894102e5
si549: use recommended i2c read sequence
2019-11-28 17:49:02 +08:00
2e55e39ac7
wrpll: use spaces to indent
2019-11-28 17:40:25 +08:00
354d82cfe3
wrpll: drive helper clock domain
2019-11-28 17:40:00 +08:00
4a03ca928d
artiq_flash: sayma fixes
2019-11-28 17:38:29 +08:00
68cab5be8c
si549: cleanups
2019-11-28 16:36:59 +08:00
bcd2383c9d
wrpll: si549 initialization
2019-11-27 22:58:08 +08:00
4832bfb08c
wrpll: i2c functions, select_recovered_clock placeholder
2019-11-27 21:21:00 +08:00
449d2c4f08
libboard_misoc: fix !has_i2c
2019-11-27 21:04:28 +08:00
e0687b77f5
si5324: 10 MHz ext_ref_frequency
...
* close #1254
* tested on innsbruck2 kasli variant
* sponsored by Uni Innsbruck/AQT
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-11-22 18:29:12 +01:00
c536f6c4df
sayma_amc: output ddmtd_rec_clk
2019-11-20 19:16:04 +08:00
ae50da09c4
drtio/gth_ultrascale: support OBUFDS_GTE3
2019-11-20 19:15:50 +08:00
fe0c324b38
sayma: integrate si549 core
2019-11-20 17:37:16 +08:00
fa41c946ea
wrpll: si549 fixes
2019-11-20 17:04:24 +08:00
c5dbab1929
gateware: move wrpll to drtio
2019-11-20 14:43:08 +08:00
gthickman
56d4b70e01
ad9910 osk ( #1387 )
...
* updated adoo10.py for RAM mode frequency control
* updated docstrings for set_cfr1() in ad9910.py
* fixed typo in ad9910.py
* added docstrings to ad9910.py
* removed OSK-related changes in AD9910, to be included in a separate branch.
* updated AD9910 set_cfr1 for control of OSK mode parameters
* updated AD9910 set_cfr1() for control of OSK mode parameters.
2019-11-18 15:57:26 +01:00
Fabian Schmid
f73e2a3d30
doc: clarify urukul attenuator behavior
...
Closes #1386
Signed-off-by: Fabian Schmid <fabian.schmid@mpq.mpg.de>
2019-11-18 15:56:00 +01:00
3adc799785
update GUI background
2019-11-15 13:49:09 +08:00
db13747279
fix device_db alias corner case bugs. Closes #1140
2019-11-14 16:22:45 +08:00
4707aef45c
split out artiq-comtools
2019-11-14 15:21:51 +08:00
4416378d21
frontend: add --version to common tools
2019-11-14 11:42:31 +08:00
Garrett
f8a7e278b8
removed OSK-related changes in AD9910, to be included in a separate branch.
2019-11-12 19:07:05 +01:00
Garrett
3a19ba7e62
added docstrings to ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
4ad3651022
fixed typo in ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
6d34eb3bb0
updated docstrings for set_cfr1() in ad9910.py
2019-11-12 19:07:05 +01:00
Garrett
61ca46ec3f
updated adoo10.py for RAM mode frequency control
2019-11-12 19:07:05 +01:00
fd7081830c
remove fire_and_forget (moved to sipyco)
2019-11-12 19:43:04 +08:00
3fd6962bd2
use sipyco ( #585 )
2019-11-10 15:55:17 +08:00
6644903843
bootloader: fix imports
2019-11-06 14:45:55 +08:00
5279bc275a
urukul: rework EEPROM synchronization. Closes #1372
2019-11-05 18:56:10 +08:00
David Nadlinger
bc3b55b1a8
gateware/eem: Force IOB=TRUE on Urukul SYNC output
...
Without this, the final register in the SYNC signal TTLClockGen
isn't (always) placed in the I/O tile, leading to more jitter
than necessary, and causing "double window" artefacts. See
sinara-hw/Urukul#16 for more details.
(Patch based on work by Weida Zhang, testing by various members
of the community in Oxford and elsewhere.)
2019-11-05 17:14:07 +08:00
b25a17fa37
netboot: support slave FPGA loading
2019-11-05 16:28:49 +08:00
307f39e900
remoting: fix multiuser access. Closes #1383
2019-11-05 15:46:07 +08:00
9dc82bd766
bootloader: add no_flash_boot config option to force network boot
2019-11-05 15:31:08 +08:00
e2f9f59472
artiq_flash: fix flashing Sayma RTM from package
2019-11-05 15:19:01 +08:00
98854473dd
sayma_amc: use all transceivers on master ( #1230 )
2019-11-02 12:12:32 +08:00
29b4d87943
firmware: add cargosha256.nix
2019-11-01 10:28:41 +08:00
5362f92b39
bootloader: disable minimum stack space check in linker script
...
* The value varies greatly whether netboot is enabled or not.
* There is no simple solution to detect has_ethmac in the linker script and set the value accordingly.
* The space check is an imperfect solution that will be superseded by stack pointer limits.
* Left commented out so we can re-enable it manually during development if stack corruption is suspected.
2019-11-01 10:25:14 +08:00
deadfead2a
bootloader: fix !has_ethmac
2019-11-01 10:19:08 +08:00
42af76326f
kasli: enlarge integrated CPU SRAM for DRTIO masters
...
Required by the bootloader netboot support.
2019-11-01 10:15:13 +08:00
a78e493b72
firmware: load slave FPGA in bootloader
2019-10-31 12:42:40 +08:00
389a8f587a
slave_fpga: modularize
2019-10-31 11:50:53 +08:00
9a35a2ed81
test_frontends: update
2019-10-30 22:02:16 +08:00
bc050fdeec
bootloader: treat zero-length firmware in flash as no firmware
2019-10-30 21:46:06 +08:00
228e44a059
sayma: enable Ethernet on DRTIO satellite variant
...
So that netboot can be used in bootloader.
2019-10-30 21:39:00 +08:00
dc71039934
sayma, metlino: increase integrated_sram_size on Ethernet-enabled variants
2019-10-30 21:36:00 +08:00
3042476230
artiq_netboot: remove unnecessary import
2019-10-30 21:29:33 +08:00
c96de7454d
remove artiq_devtool
2019-10-30 21:27:24 +08:00
88dbff46f4
add netboot tool
2019-10-30 21:24:51 +08:00
462cf5967e
bootloader: add netboot support
2019-10-30 21:23:42 +08:00
1f15e55021
comm_analyzer: don't assume every message has data
...
close #1377
2019-10-28 15:35:44 +01:00
David Nadlinger
611bcc4db4
compiler: Cache expensive target data layout queries
...
On one typical experiment, this shaves about 3 seconds (~25%)
off the overall kernel compilation time.
GitHub: Closes #1370 .
2019-10-28 11:09:25 +00:00
David Nadlinger
5d7f22ffa4
compiler: Remove provision for unused four-parameter llptr_to_var() form [nfc]
...
`var_type` was presumably intended to convert to a target type,
but wasn't actually acted on in the function body (nor was it
used anywhere in the codebase).
2019-10-28 11:02:46 +00:00
f2f7170d20
hmc7043: use recommend I/O standards
...
https://github.com/sinara-hw/Sayma_RTM/issues/116#issuecomment-544187952
2019-10-21 22:56:10 +08:00
47a83c71f1
firmware: more readable network addresses message
2019-10-21 14:00:14 +08:00
818d6b2f5a
bootloader: fix compilation problems
2019-10-21 13:28:17 +08:00
8f76a3218e
firmware: move i2c to libboard_misoc, enable IPv6 in bootloader, share network settings
2019-10-21 12:58:52 +08:00
1c5e749036
satman: remove compilation warning without JESD DACs
2019-10-21 12:53:54 +08:00
d26d80410e
runtime: refactor network settings
2019-10-19 17:56:35 +08:00
6d5dcb4211
runtime: enable IPv6. Closes #349
2019-10-19 17:20:33 +08:00
05e8f24c24
sayma2: JESD204 synchronization
2019-10-18 23:28:47 +08:00
62b49882b9
examples/kc705: fix dds_test
2019-10-17 07:37:00 +08:00
a8f85860c4
coreanalyzer: AD9914 fixes ( #1376 )
2019-10-17 07:29:33 +08:00
d42ff81144
examples/sayma_master: update device_db
2019-10-16 18:49:25 +08:00
8fa3c6460e
sayma_amc: set direction of external TTL buffer according to RTIO PHY OE
2019-10-16 18:48:50 +08:00
37d0a5dc19
rtio/ttl: expose OE
2019-10-16 18:48:20 +08:00
bc060b7f01
style
2019-10-16 18:18:11 +08:00
40d64fc782
sayma: remove standalone examples (no longer supported)
2019-10-16 17:54:39 +08:00
21a1c6de3f
sayma: use SFP0 for DRTIO master
2019-10-16 17:53:40 +08:00
6cf06fba7b
examples: use default IP addresses for boards
2019-10-16 16:18:30 +08:00
314d9b5d06
kasli: default to 125MHz frequency for DRTIO
...
This is the consistent and most common option. Sayma will also eventually move to it.
2019-10-08 12:59:52 +08:00
4df2c5d1fb
sayma: prepare for SYSREF align
...
We will try DDMTD on the AMC first, as this is simpler and perhaps will work on v2 after the power supply fixes.
2019-10-08 12:30:47 +08:00
5ee81dc643
satman: define constants for JdacBasicRequest reqnos
2019-10-08 10:27:04 +08:00
4b3baf4825
firmware: run PRBS and STPL JESD204 tests
2019-10-08 00:10:36 +08:00
03007b896e
sayma_amc: sma -> mcx
2019-10-07 20:31:35 +08:00
ebd5d890f1
satman: check for JESD ready
2019-10-06 23:10:57 +08:00
90e3b83e80
hmc7043: turn on AMC_FPGA_SYSREF1
...
Florent's JESD core won't work at all without.
2019-10-06 22:49:00 +08:00
97a0dee3e8
jesd204: remove ibuf_disable
...
We use the MOSFET to mute the HMC7043 noise on hardware v2 instead.
2019-10-06 22:26:31 +08:00
1bc7743e03
sayma: fix hmc7043 output settings for v2 hardware
2019-10-06 21:50:29 +08:00
a421820a32
sayma: initialize DACs over DRTIO
2019-10-06 21:42:45 +08:00
f8e4cc37d0
sayma_rtm: reset and detect DACs
2019-10-06 20:15:27 +08:00
f62dc7e1d4
sayma: refactor JESD DAC channel groups
2019-10-06 20:15:09 +08:00
c4c884b8ce
ad9154: simplify, focus on AD9154 config and do not include JESD
2019-10-06 20:07:02 +08:00
fdba0bfbbc
satman: move now-unrelated hmc830_7043 init away from DRTIO transceiver init
2019-10-06 19:22:46 +08:00
1c6c22fde9
sayma_amc: HMC830_REF moved to RTM side
2019-10-06 18:15:37 +08:00
ad63908aff
hmc830_7043: enable_fpga_ibuf -> unmute
2019-10-06 18:13:59 +08:00
5ad65b9d30
hmc830_7043: remove clock_mux
2019-10-06 18:13:27 +08:00
e6ff44301b
sayma_amc: cleanup (v2.0 only)
2019-10-06 18:11:43 +08:00
e9b81f6e33
remove serwb
...
DRTIO is a better solution
2019-10-06 18:10:23 +08:00
7cd02d30b7
sayma_rtm_drtio: replace sayma_rtm
2019-10-06 17:59:53 +08:00
b3b85135a3
sayma_rtm_drtio: add DDMTD core, move specific cores out of SatelliteBase
2019-10-06 17:59:11 +08:00
346c985347
sayma_rtm_drtio: use artiq_sayma folder
2019-10-06 17:30:08 +08:00
e2a924449d
artiq_flash: use DRTIO RTM gateware
2019-10-06 17:28:14 +08:00
4198033657
sayma_rtm_drtio: cleanup (v2.0 only)
2019-10-06 16:42:34 +08:00
5612b31860
sayma_rtm_drtio: add HMC clock chip and DAC control
2019-10-06 16:15:24 +08:00
a8cf4c2b18
sayma_rtm: hwrev v2.0 by default
2019-10-06 13:25:30 +08:00
1bc5d44a7c
artiq_flash: do not flash RTM gateware on Sayma variants that don't need it
2019-10-06 13:15:50 +08:00
bb5ff46f7d
Merge branch 'wrpll'
2019-10-05 10:24:11 +08:00
7b95814cf5
sayma_amc: refactor, add SimpleSatellite variant
2019-10-05 10:24:06 +08:00
58b7bdcecc
sayma_amc: refactor RTM FPGA code
2019-10-05 10:24:06 +08:00
96fc4a21e8
sayma_amc: remove dummy FPGA pin assignment testing code
2019-10-05 10:24:06 +08:00
Tim Ballance
ada3b39f4e
Fix ad9910 ram mode asf scale error in polar mode
2019-10-04 20:14:41 +02:00
Tim Ballance
448080e71d
Fix ad9910 ram mode asf scale error
...
RAM mode amplitude to ASF conversion should be << 18 rather than << 16
2019-10-04 20:14:41 +02:00
6aa68e1715
sayma_rtm2: select filtered clock from Si5324
2019-10-04 22:56:16 +08:00
6cb0f5de59
sayma_amc: enable DRTIO switching
2019-10-04 22:55:23 +08:00
0cf8a46bbd
sayma_amc2: select filtered clock from Si5324
2019-10-04 21:28:26 +08:00
6f533727cb
artiq_flash: use regular bscan_spi_xcku040 for Sayma
...
The modified version is no longer necessary on v2 boards, and breaks flash bank 1.
2019-10-04 17:50:45 +08:00
4c1fe1de0d
environment: implement HasEnvironment.call_child_method ( #1366 )
2019-09-30 23:58:36 +08:00
Charles Baynham
0b1fb255a9
tools: Wrap Task _do() calls in a generic exception handler
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2019-09-20 23:00:59 +08:00
Charles Baynham
e50a6d5aaf
worker_impy: ignore newline at start of experiment docstring
2019-09-20 22:10:49 +08:00
f0e87d2e59
grabber: remove unused code
2019-09-20 15:26:12 +02:00
4e77be0511
firmware: add Cargo.lock header that newer cargo wants
2019-09-17 15:22:14 +08:00
Charles Baynham
b7abf2fb53
pyon: Handle inf in decoding
2019-09-12 09:46:05 +08:00
38fca01189
artiq_ddb_template: add su-servo support ( #1343 )
2019-09-11 15:52:25 +08:00
991c686d72
kasli_generic,eem: print RTIO channels in hex like artiq_ddb_template
2019-09-11 15:51:53 +08:00
f4dd7e5e29
kasli_tester: init urukul channel before calibrating
...
Otherwise the DDS is not initialized and with a cold system it fails to
find IO_UPDATE edges.
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-09-11 07:16:35 +00:00
7492a59f6d
kasli_generic: add SUServo support ( #1343 )
2019-09-11 11:12:48 +08:00
David Nadlinger
6d6f66338b
runtime: Update core config panic_reset command suggestion message
2019-09-10 19:31:19 +01:00
Charles Baynham
ddd34e5a9c
influx_schedule: log repo_rev along with other info
...
Signed-off-by: Charles Baynham <charles.baynham@npl.co.uk>
2019-09-10 13:46:28 +02:00
98caaebade
consistent use of 'class name' terminology to select a class within an experiment file. Closes #1348
2019-09-09 15:16:33 +08:00
21021beb08
kasli: remove opticlock (moved to kasli_generic)
2019-09-09 15:03:10 +08:00
436662be52
ddb_template: add Novogorny support
2019-09-09 15:00:45 +08:00
69c2acd9d7
ddb_template: sampler cnv is ttl not spi
2019-09-09 14:57:42 +08:00
cfb5ef5548
kasli_generic: add Novogorny support
2019-09-09 14:54:34 +08:00
0b9168994f
Revert "dashboard: Sort TTL moninj channels by name"
...
This reverts commit b3db3ea6fcCloses #1288
2019-09-06 11:17:10 +08:00
Charles Baynham
d31f30a436
influxdb_schedule: fix typo in parameter name
2019-09-05 17:42:56 +02:00
Charles Baynham
7ac8feea19
influxdb_schedule: Handle all exceptions
2019-09-05 17:42:56 +02:00
1fb317778a
eem/grabber: allow third EEM to be specified
2019-08-29 18:58:12 +08:00
90e8e074cd
firmware: turn errors into &str for remote_i2c as well
...
should resolve breakage on a few targets/variants introduced by PR #1351
2019-08-29 09:05:47 +08:00
71b3c66af9
firmware: conditionally compile has_si5324
...
avoids unused warnings where this module is not used.
2019-08-29 09:04:54 +08:00
959679d8b7
wrpll: add I2CMasterMachine
2019-08-27 18:02:05 +08:00
c03c35f375
Revert "compiler: armv7-unknown-linux-gnueabihf -> armv7-linux-gnueabihf"
...
rustc insists on -unknown.
This reverts commit cf47fa44d8
2019-08-26 11:23:00 +08:00
cf47fa44d8
compiler: armv7-unknown-linux-gnueabihf -> armv7-linux-gnueabihf
2019-08-26 11:12:49 +08:00
98cd9a539c
compiler: support Cortex A9 target
2019-08-26 10:46:22 +08:00
afe162ceca
firmware: don't unwrap() but propagate pca9548 errors
2019-08-17 09:15:26 +08:00
a8aabd3815
firwmare: turn i2c errors into &str
2019-08-17 09:15:26 +08:00
8fc5ce902f
firmware: let kasli obtain default hardware_addr from i2c_eeprom
2019-08-17 09:15:26 +08:00
d666f3d573
firmware: factor out mod pca9548 from si5324
...
orepares for further i2c devices.
2019-08-17 09:15:26 +08:00
1fd2322662
wrpll/thls: implement global writeback
2019-08-15 23:16:17 +08:00
24082b687e
wrpll/filters: clean up and make compatible with thls
2019-08-15 17:58:22 +08:00
9331fafab0
wrpll/filters: new code from Weida
2019-08-15 17:24:40 +08:00
5c3974c265
wrpll/thls: fix opcode decoding
2019-08-15 17:12:48 +08:00
19620948bf
wrpll/thls: implement signed numbers
2019-08-15 17:04:17 +08:00
efc43142a6
wrpll/thls: implement min/max
2019-08-15 16:42:59 +08:00
44969b03ad
wrpll/thls: rework instruction decoding
2019-08-15 15:55:13 +08:00
2776c5b16b
wrpll/thls: support mulshift
2019-08-15 15:07:13 +08:00
e9b78b62db
kasli_tester/zotino: always alternate voltage sign
...
Before the voltages on a second Zotino would start 2.1, 1.9, 2.2, 1.8
..., 3.6, 0.4 and overlap with the voltages on the first.
Now the voltages are 2.1, -2.1, 2.2, -2.2, ..., 3.6, -3.6 which allows
quick identification of card/channel and easy prediction when deploying.
2019-08-06 17:38:55 +02:00
f861459ace
wrpll: add filter algorithms (WIP)
2019-08-02 13:23:16 +08:00
David Nadlinger
99e490f9ff
coredevice/suservo: Slightly reword get_adc[_mu]() docstring for clarity
...
This hopefully suggests a bit better that the value is the last one
fetched by the servo (i.e. needs the servo active to update), rather
than somehow requesting a new sample to be taken.
2019-07-30 12:22:08 +01:00
3f0657f2a8
artiq_influxdb_schedule: add schedule logger
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-07-26 14:47:18 +02:00
7a5dcbe60e
wrpll/thls: support processor start/stop
2019-07-24 18:51:33 +08:00
b8870997d0
doc: clarify TTL direction control with buffered cards
2019-07-24 10:04:45 +08:00
623446f82c
wrpll/thls: simple simulation demo
2019-07-20 18:50:57 +08:00
831b3514d3
wrpll/thls: stop at return statement
2019-07-19 16:27:29 +08:00
David Nadlinger
280915d54f
coredevice/suservo: Adjust T_CYCLE to match gateware
...
See GitHub #1338 .
2019-07-17 00:20:22 +01:00
34222b3f38
wrpll: encode thls program
2019-07-09 17:56:14 +08:00
5f461d08cd
wrpll: add simple thls compiler
2019-07-09 16:07:31 +08:00
f7e10759dc
suservo: note requirement to stop servo when accessing state
...
As already mentioned in the gateware.
One alternative would be to detect address collisions and
stall the read for one cycle.
Note that there will in general not be a consistent view of the servo
state unless the servo is stopped.
close #1337
2019-07-08 18:37:42 +02:00
e4fff390a8
si590 -> si549
...
Had mistaken the part numbers.
2019-07-07 09:39:55 +08:00
dceb5ae501
wrpll: Si590 I2C mux, CDC
2019-07-05 23:42:37 +08:00
f8dba7ae35
rtio: use BlindTransfer from Migen
2019-07-05 18:46:18 +08:00
5a9bb0ecba
runtime: fix incorrect 'RTIO clock failed' report
2019-06-24 23:33:13 +08:00
David Nadlinger
8bf9640185
coredevice/suservo: Fix output IIR state width in docstring
2019-06-21 11:27:39 +02:00
David Nadlinger
34f48f57cc
coredevice/suservo: Fix {get,set}_y_mu() scaling
...
Previously, Channel.set_y(1) would set the output to -1 instead.
2019-06-21 11:27:39 +02:00
f6edceb23d
kasli_tester: cleanup/fix test skipping
2019-06-21 16:00:14 +08:00
whitequark
b8b9fa51bd
libdyld: accept objects with no rela relocations.
2019-06-17 06:43:34 +00:00
David Nadlinger
0353966ef7
gateware/suservo: Sign-extend data on RTIO read-back
...
See GitHub #1327 for original patch by Brad Bondurant.
2019-06-14 23:46:16 +01:00
David Nadlinger
720838a23e
gateware/suservo: Avoid magic number for activation delay width
...
Mostly for documentation purposes; 8 bits ought to be enough for
everyone.
2019-06-14 23:45:40 +01:00
53789ba9aa
tester: handle urukul switch differences
2019-06-14 10:54:00 +00:00
6655e567df
ddb_template: urukul fixes
...
* fix/add sw (ad9912 and ad9910)
* allow pll_n to be changed
2019-06-14 10:53:03 +00:00
53c778ae2d
runtime: fix previous commit
2019-06-14 15:53:01 +08:00
a947867887
runtime: support Kasli Si5324 bypass via rtio_clock=e
2019-06-14 15:48:05 +08:00
66a66b03b4
style
2019-06-14 15:29:16 +08:00
87ce24e867
runtime: refactor startup and RTIO clocking initialization
2019-06-14 15:26:30 +08:00
43e58c939c
sayma: drop MasterDAC
...
This seemed like a good idea then, but it introduces complexity, corner cases, and additional testing difficulties.
Now Sayma works fine with Kasli as a master, which is simpler.
2019-06-14 14:06:16 +08:00
b04e15741b
drop SI5324_SAYMA_REF
2019-06-14 14:03:48 +08:00
636b4cae5a
tester: urukul single-eem mode
2019-06-13 12:48:42 +00:00
591de0e579
ddb_template: support urukul single-eem mode
2019-06-13 12:19:12 +00:00
967d192cbe
ddb_template: wrong copy paste comma
2019-06-13 11:30:22 +00:00
8853cf8df9
dashboard: work around disappearing TTL/DDS panel bug. Closes #1307
2019-06-13 18:41:42 +08:00
1a898c423a
aqctl_corelog: filter log messages. Closes #1316
2019-06-13 18:17:52 +08:00
834d03527b
examples/dds_setter: fix RTIO underflow
2019-06-13 18:07:39 +08:00
e3c58d5872
remove outdated kc705 examples
2019-06-13 18:06:26 +08:00
74e4b01201
urukul: document consequences of incorrect CPLD clock settings
2019-06-11 11:12:12 +08:00
adf3df2bb5
suservo coredevice driver: mask ftw to avoid erroneous sign extension
2019-06-03 21:40:04 +02:00
bc2cfd77f5
metlino: add EEMs
2019-05-19 18:16:00 +08:00
cdef50c0dd
sayma_amc: Urukul v1.3
2019-05-19 16:54:38 +08:00
34c61db790
artiq_flash: fix Metlino support
2019-05-19 16:37:40 +08:00
88b6496c8c
artiq_flash: add Metlino support
2019-05-19 16:30:10 +08:00
9dcaae6395
metlino: use variant output directory
2019-05-19 16:24:51 +08:00
b4779969d0
metlino: work around vivado bug ( #1230 )
2019-05-19 11:27:27 +08:00
874542f33f
add Metlino support
2019-05-19 10:57:43 +08:00
hartytp
cfe1f56f73
suservo: add some more comments to the RTServoMem to clarify the RTIO interface ( #1323 )
2019-05-17 16:12:35 +01:00
David Nadlinger
84b91ee8bd
master/scheduler: Document Deleter semantics [nfc]
...
From looking at the code, it wasn't obvious to me that this is
supposed to handle multiple calls to delete(). This is the case,
however, when for instance Scheduler.delete()ing a run, which
will then also be deleted again from AnalyzeStage.
2019-05-14 22:37:16 +01:00
hartytp
c2b4f0cfe3
sync_struct: catch ConnectionErrors in _receive_cr ( #1319 )
2019-05-10 12:53:51 +01:00
hartytp
bbcd1db025
sync_struct: replace ConnectionError subclasses with ConnectionError ( #1318 )
2019-05-10 12:48:12 +01:00
hartytp
30fe624fe5
sync_struct: flake8 [nfc] ( #1317 )
2019-05-10 12:42:06 +01:00
1a3d71760d
consolidate kasli example folders
2019-05-10 12:17:38 +08:00
f551491a84
remove sayma_masterdac example
2019-05-10 12:13:07 +08:00
72f7f8386f
remove old Kasli device databases ( #1289 )
2019-05-10 12:11:42 +08:00
86f462f40e
artiq_ddb_template: add edge counter support
2019-05-09 17:20:13 +08:00
fda3cb2482
kasli_generic: add edge counter support
2019-05-09 17:19:11 +08:00
ead9a42842
kasli: remove VLBAIMaster, VLBAISatellite variants
2019-05-08 15:58:25 +00:00
0c9b810501
kasli: remove PTB/PTB2/LUH/HUB variants
...
see sinara-systems and nix-scripts repos
2019-05-08 15:51:18 +00:00
1d2cc60e0d
kasli_generic: support ext_ref
2019-05-08 15:51:18 +00:00
948ea396c0
remove old buildbot kc705 device-db
2019-05-07 17:28:06 +08:00
3209197b0b
artiq_flash: do not needlessly look for artifacts
2019-05-07 17:20:13 +08:00
a1c97ec4dd
kasli_tester: support selection of TTL output to use as stimulus
2019-05-07 16:58:00 +08:00
4cc9bd33ce
test: only test_rpc_timing actually requires ARTIQ_LOW_LATENCY
2019-04-24 11:22:07 +08:00
bb39eedf5b
fix previous commit
2019-04-20 10:44:07 +08:00
93f4f31f45
devices.ctlmgr -> master.ctlmgr
2019-04-20 00:25:44 +08:00
56033b60a7
move thorlabs_tcube out of tree ( #887 )
2019-04-20 00:09:58 +08:00
eaec519ac8
move lda out of tree ( #887 )
2019-04-19 23:43:14 +08:00
d4781e9a8a
aqctl_corelog: add simulation mode
2019-04-19 23:42:37 +08:00
62e9b2d85e
move novatech409b out of tree ( #887 )
2019-04-19 21:56:16 +08:00
4c1fb0c2a1
move korad_ka3005p out of tree ( #887 )
2019-04-19 19:47:41 +08:00
73d6078883
use IP instead of hostname for kc705-1
...
Makes it easier to run tests in the Windows VM
2019-04-18 22:59:32 +08:00
David Nadlinger
4d215cf541
firmware: Add Si5324 config for 125 MHz ext ref
...
PLL divider settings as suggested by DSPLLsim 5.1.
2019-04-15 22:22:19 +01:00
David Nadlinger
dc7a642b26
test/lit: Make abs() integration test slightly more interesting
...
I had accidentally not included this local diff in the PR that was
merged as commit cdaf554736
2019-04-14 04:12:40 +01:00
David Nadlinger
cdaf554736
compiler: Implement abs() for scalars
...
GitHub: Fixes #1303 .
2019-04-13 13:39:16 +08:00
97b7ed557b
sayma_amc: do not use SFP0 (now used for Ethernet)
2019-04-12 18:47:18 +08:00
David Nadlinger
cd7a5a3683
firmware: Fix kernel RPC handling of zero-size values (e.g. empty arrays)
2019-03-31 18:33:44 +01:00
David Nadlinger
b4ddf4c86b
firmware: Make "unexpected reply from kernel CPU" log messages unique
...
This makes it easier to localize issues based on the log output.
2019-03-31 18:31:56 +01:00
David Nadlinger
236b30ac5f
coredevice: Add test for recent kernel RPC fixes
...
This covers all three (de)serialisation fixes.
2019-03-31 18:25:56 +01:00
David Nadlinger
88fd5c8440
compiler: Fix crash in escape analysis for assigning string literals
2019-03-31 17:10:27 +01:00
David Nadlinger
990e0b7dd9
compiler: Fix comparison of tuples of lists
2019-03-31 17:10:27 +01:00
David Nadlinger
baf102dbb2
compiler: Fix comparison of nested lists
2019-03-31 17:10:27 +01:00
David Nadlinger
8e225433a5
firmware: Fix kernel RPC strings size (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
b8ff627be9
firmware: Fix kernel RPC tuple size calculation (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
fc95183e04
coredevice: Fix host-side serialization of (nested) lists
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
f9af058b96
compiler: Quote tuples as TTuple values
...
Previously, they would end up being TInstances,
rendering them useless.
2019-03-31 23:40:21 +08:00
3634cfac86
typo
2019-03-31 22:27:07 +08:00
4580f3dac8
test/lit: support overriding libartiq_support.so
2019-03-31 22:26:09 +08:00
4499ef1748
kasli: only add moninj core if there are probes to monitor
2019-03-24 14:09:52 +08:00
5d31cf2268
sayma_rtm2: si5324_clkout -> cdr_clk_clean
2019-03-23 13:48:36 +08:00
560849e693
sayma_amc: add DRTIO transceiver on rtm_amc_link for v2 hardware
2019-03-23 13:41:22 +08:00
bbb8c00518
sayma_amc: default to satellite variant
2019-03-23 13:37:55 +08:00
18fbe0b081
sayma_rtm_drtio: support v2 hardware
2019-03-23 13:31:28 +08:00
c7205ad82f
sayma_rtm: preliminary v2 support
2019-03-23 12:37:03 +08:00
d07c6fcfea
ad9910: handle unprogrammed EEPROM and numpy corner cases
2019-03-22 14:28:47 +08:00
7cdcaf0d00
tests: fix coredevice tests after implementing scheduler defaults
2019-03-22 07:27:55 +08:00
33b28f6e56
sayma_amc: add placeholder code to use DDMTD signals on v2 hardware
2019-03-21 17:37:22 +08:00
2ec5a58c59
sayma_amc: si5324_clkout -> cdr_clk_clean
2019-03-21 14:09:33 +08:00
af785b9a9c
artiq_compile: fix after adding scheduler defaults
...
Closes #1290
2019-03-21 09:56:19 +08:00
8d2c1be44f
artiq_flash: ignore rtm_gateware on Sayma for variant autodetection
2019-03-17 15:57:50 +08:00
c2622297bd
urukul: use board_data instead of user_data to store calibration in EEPROM
2019-03-15 17:57:35 +08:00
a01425bc9c
kasli_tester: do not attempt to synchronize AD9912 Urukul
2019-03-15 17:13:29 +08:00
fcf8828cb6
fix tests, artiq_run after implementing scheduler defaults ( #1290 )
2019-03-13 17:20:30 +01:00
5e7c83c9cf
artiq_ddb_template: enable Urukul synchronization from EEPROM
2019-03-13 15:42:51 +08:00
e504262b67
kasli_tester: calibrate Urukul synchronization and write to EEPROM
2019-03-13 15:36:05 +08:00
346299e7f8
kasli_tester: enable EEPROM for Urukul synchronization
2019-03-13 15:35:23 +08:00
04e0c23e78
ad9910: support reading synchronization values from EEPROM
2019-03-13 15:34:47 +08:00
852048dce4
artiq_ddb_template: create Urukul EEPROM device
2019-03-13 15:34:23 +08:00
964a349a19
add Kasli I2C driver
2019-03-13 15:33:50 +08:00
c56c3e5588
dashboard: add support for experiment pipeline/priority/flush defaults
2019-03-12 10:54:15 +01:00
8659c769cb
master/language: add methods to set experiment pipeline/priority/flush defaults
2019-03-12 10:54:15 +01:00
b2177eff81
kasli_tester: run test_i2c_switch
2019-03-11 21:06:28 +08:00
227c729f56
fix permissions
2019-03-11 20:43:28 +08:00
David Nadlinger
b3db3ea6fc
dashboard: Sort TTL moninj channels by name
...
With growing system complexity, the moninj channel index is
no longer a very intuitive ordering for typical end users.
2019-03-11 03:30:14 +01:00
David Nadlinger
5fd92a6175
gui: Fix crash when quickly opening/closing applets
...
Quickly closing/reopening applets (e.g. quickly clicking the checkbox
on an entire folder of applets) would previously lead to an occasional
KeyError on the self.dock_to_item access in on_dock_closed, as close()
would be invoked more than once.
The geometry/checked state handling can potentially be cleaned up
further, but at least this avoid the crash.
2019-03-10 20:57:10 +00:00
e47ba4b35e
kasli_generic: fix identifier string
2019-03-08 19:57:20 +08:00
b219f8b5c7
artiq_flash: autodetect variant
2019-03-08 19:47:24 +08:00
fc9d4c7bdc
artiq_flash: fix sayma master detection
2019-03-08 19:36:35 +08:00
25bcebd1f6
artiq_flash: not all boards are development boards
2019-03-08 19:35:20 +08:00
ed2d8dfa7a
artiq_flash: resolve openocd symbolic links
...
On NixOS, openocd may be a symlink in /run/current-system/sw/bin when installed system-wide.
2019-03-08 12:43:06 +08:00
0d05d4b813
artiq_client: python 3.7 compatibility
2019-02-26 17:09:38 +08:00
ec966de007
thorlabs_tcube: cleanup
2019-02-26 16:50:19 +08:00
62c7f75a9e
sayma_amc: support hardware revisions
2019-02-25 23:49:45 +08:00
d45249197c
siphaser: improve ultrascale clock routing
2019-02-25 23:00:01 +08:00
de3992bbdd
kasli: remove HUST variants (supported by kasli_generic)
2019-02-23 15:44:17 +08:00
791f830ef6
kasli_generic: support DRTIO
2019-02-23 15:41:05 +08:00
d39338d59f
artiq_ddb_template: fix --satellite
2019-02-23 15:27:18 +08:00
d79a6ee41c
artiq_ddb_template: fix pll_vco indentation
2019-02-22 23:50:30 +08:00
62985fbd29
binaries -> board-support
2019-02-22 23:18:01 +08:00
1c35c051a5
kasli: remove variants supported by generic builder
2019-02-22 23:08:49 +08:00
05b128469f
artiq_ddb_template: support setting Urukul pll_vco
2019-02-22 22:59:20 +08:00
cd60803f21
device_ddb_template: add Sampler, Zotino, Grabber and SFP LED support
2019-02-22 20:07:15 +08:00
269f0a4d6f
artiq_ddb_template: add Urukul support
2019-02-22 19:33:27 +08:00
8049c52d06
frontend: add artiq_ddb_template (WIP, TTL only)
2019-02-22 17:19:48 +08:00
8edc2318ab
style
2019-02-22 17:19:20 +08:00
aee8965897
ad9910: add ram conversion tooling and unittests
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 15:59:52 +00:00
ec6588174b
ad9910: add ram operation unittests
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 15:14:32 +00:00
b57cad77ad
ad9910: make ram read work for short segments
...
also cleanup and style
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 14:47:58 +00:00
596d3e20d7
dashboard,browser: do not call get_user_config_dir() in argparse
...
This caused two problems when building the docs:
* the path printed in the docs depends on the machine where they are built
* it pollutes ~/.config, and also breaks Nix builds
2019-02-19 15:43:04 +08:00
40a0cf806d
support overriding versioneer
2019-02-17 14:49:52 +08:00
6ad2e13515
kasli: add generic builder (WIP)
2019-02-12 19:18:09 +08:00
2104a93f78
build_soc: allow overriding SoC class name
2019-02-12 18:33:52 +08:00
ff4e4f15ed
kasli: expose base SoC classes
2019-02-12 18:33:27 +08:00
whitequark
0a84dd38c1
Add missing test from d6eb2b02.
2019-02-10 07:25:53 +00:00
David Nadlinger
01c3000ef3
master: Print offending key on HDF5 dataset type error
...
This helps debugging the cause of TypeErrors arising from types
not handled by the HDF5 serializer, as the backtrace doesn't
otherwise include any useful information.
2019-02-09 20:50:38 +00:00
David Nadlinger
56b2e0c262
artiq_influxdb: Support append() in dataset _Mock
...
This went undetected as append mods were not actually in use
in any part of the codebase previously.
2019-02-09 20:50:38 +00:00
David Nadlinger
bf84226c7d
language: Support appending to datasets
2019-02-09 20:50:38 +00:00
David Nadlinger
820326960e
test: Add basic experiment dataset interface tests
2019-02-09 20:50:38 +00:00
2de1eaa521
dashboard: reconnect to core moninj
...
* handle disconnects like core device address changes and do a
disconnect/connect iteration
* after connection failure wait 10 seconds and try again
* this addresses the slight regression from release-2
to release-3 where the moninj protocol was made stateful
(#838 and #1125 )
* it would be much better to fix smoltcp/runtime to no loose the
connection under pressure (#1125 )
* the crashes reported in #838 look more like a race condition
* master disconnects still require dashboard restarts
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-08 23:52:16 +08:00
1cfd26dc2e
kasli: add UNSW variant
2019-02-08 17:51:51 +08:00
3e8fe3f29d
suservo: fix permissions
2019-02-08 14:54:02 +08:00
David Nadlinger
ef934ad958
Add test/release notes for command-less controllers
...
See eaa1b44b00
2019-02-07 21:51:15 +00:00
eaa1b44b00
ctlmgr: ignore controllers without a "command" field
...
Allow controllers to be specified without a "command" field. The user takes
responsibility for ensuring the controller is running: the controller manager
does not attempt to ping the controller. This is useful when one has a common
controller shared between several masters.
2019-02-07 21:50:29 +00:00
hartytp
0ebff04ad7
SUServo: apply bit masks to servo memory writes to prevent overflows
...
Signed-off-by: TPH <thomas.harty@physics.ox.ac.uk>
2019-02-07 17:04:11 +01:00
hartytp
f6142816b8
Revert "SUServo: remove references to non-existent a0 parameter" ( #1270 )
...
This reverts commit f3aab2b89156bbc1b12f847093a87a8933293df2.
Signed-off-by: TPH <thomas.harty@physics.ox.ac.uk>
2019-02-07 15:57:43 +00:00
hartytp
fe63c9b366
SUServo: remove references to non-existent a0 parameter ( #1268 )
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 15:29:32 +00:00
hartytp
df6c1fca2c
SUServo: flake8 [NFC] ( #1267 )
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 15:13:44 +00:00
hartytp
87e85bcc14
suservo: fix coefficient data writing
...
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
2019-02-07 14:47:11 +01:00
whitequark
d6eb2b023a
compiler: monomorphize casts first, but more carefully.
...
This reverts 425cd7851Fixes #1252 .
2019-02-07 06:24:32 +00:00
b56c7cec1e
kasli: use 100MHz RTIO and 800MHz Urukul frequencies on Berkeley target
...
Urukul sync is not reliable at 125/1000
2019-02-05 11:24:45 +08:00
5a7460a38e
kasli: add sync delays to device_db_berkeley
2019-02-01 22:14:03 +08:00
ea431b6982
sayma_rtm: use 150MHz RTIO freq for DDMTD
2019-01-31 20:43:44 +08:00
ec230d6560
sayma: move SYSREF DDMTD to the RTM
...
Put RTM Si5324 into bypass mode before running.
Needs rework to cut RTM Si5324 reset trace.
Needs rework to fix LVDS termination on RTM R310/R313 and R314/R315.
Needs uFL jumper cables between RTM "REF LO DIAG" and "CRD AUX CLKIN" (sic).
2019-01-31 20:39:33 +08:00
8119000982
sayma_rtm_drtio: use Si5324 soft reset
...
Needs easy board rework to cut trace at pin 1 of Si5324.
The Si5324 contains an internal pull-up on that pin.
Allows using Si5324 + HMC7043 chips at the same time.
Allows the Si5324 bypass hack for DDMTD experiments on the RTM.
2019-01-31 19:43:54 +08:00
82106dcd95
si5324: add bypass function
2019-01-31 19:38:55 +08:00
8bbd4207d8
si5324: use consistent bitmask
2019-01-31 19:35:56 +08:00
d3c608aaec
jesd204sync: reset and check lock status of DDMTD helper PLL in firmware
2019-01-31 15:11:16 +08:00
fa3b40141d
hmc830_7043: document sayma clock muxes
2019-01-31 15:10:11 +08:00
ec8560911f
siphaser: bugfixes
...
* Fix integer overflow in degree computation
* Add some phase slips after the first transition to get out of the jitter zone and avoid intermittent short windows
2019-01-30 16:56:38 +08:00
c591009220
sayma: report TSC phase of SYSREF (TSC LSBs on SYSREF rising edge) in SYSREF sampler
...
Better visibility, better diagnostics, allows some changing of SYSREF frequency while keeping the same gateware.
2019-01-29 23:30:01 +08:00
9d0d02a561
jesd204sync: increase tolerance for coarse->final target in calibrate_sysref_target
...
There is plenty of slack (it only needs to meet timing at the RTIO frequency).
2019-01-29 16:48:55 +08:00
ed6aa29897
jesd204sync: print more information on test_slip_ddmtd error
2019-01-29 16:47:29 +08:00
2e8decbce3
kasli_sawgmaster: generate a HMC830 clock with Urukul
2019-01-29 15:06:45 +08:00
9ae57fd51e
sayma: pass rtio_clk_freq to DDMTD core
2019-01-29 15:06:45 +08:00
90c9fa446f
test: add array transfer test
...
200 kB/s, more than a factor of 10 slower than the bare string transfer
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-28 14:30:44 +00:00
7a5d28b73d
jesd204sync: test SYSREF period
2019-01-28 19:11:38 +08:00
1a42e23fb4
jesd204sync: print DDMTD SYSREF final alignment delta
2019-01-28 18:39:16 +08:00
eebff6d77f
jesd204sync: fix max_phase_deviation
2019-01-28 18:38:18 +08:00
b9e3fab49c
jesd204sync: improve messaging
2019-01-28 18:37:46 +08:00
145f08f3fe
jesd204sync: update SYSREF S/H limit deviation tolerance
...
Follows the increased DDMTD resolution.
2019-01-28 18:21:31 +08:00
ba21dc8498
jesd204sync: improve messaging
2019-01-28 18:08:20 +08:00
3acee87df2
firmware: improve DDMTD resolution using dithering/averaging
2019-01-28 16:04:04 +08:00
cfe66549ff
jesd204sync: cleanup DDMTD averaging code
2019-01-28 14:14:50 +08:00
2b0d63db23
hmc830_7043: support 125MHz RTIO
2019-01-28 13:44:08 +08:00
bdd4e52a53
ad9154: support 125MHz RTIO
2019-01-28 13:43:52 +08:00
47312e55d3
sayma: set RTIO_FREQUENCY in MasterDAC
2019-01-28 13:43:28 +08:00
443d6d8688
sayma_amc: pass RTIO clock frequency to SiPhaser
2019-01-28 09:49:03 +08:00
3b6f47886e
firmware: print more info on DDMTD stability error
2019-01-27 23:06:11 +08:00
74fdd04622
firmware: test DDMTD stability
2019-01-27 20:39:12 +08:00
81b0046f98
ddmtd: add deglitchers
2019-01-27 20:38:41 +08:00
8254560577
sayma: properly determine SYSREF coarse calibration target
2019-01-27 16:00:36 +08:00
214394e3b0
sayma: reimplement DAC SYSREF autocalibration
2019-01-27 15:28:39 +08:00
fdbf1cc2b2
sayma: rework DAC SYSREF margin validation
...
Previous code did not work when delay range was not enough for two rotations.
This removes autocalibration, to be done later. Uses hardcoded value for now.
2019-01-27 14:17:54 +08:00
7e5c062c2c
firmware: bypass channel divider for HMC7043 DCLK
2019-01-27 11:49:34 +08:00
f73ffe44f9
firmware: implement DDMTD-based SYSREF/RTIO alignment (draft)
...
Mostly works and usually gets the DAC synchronized at 2.4GHz with Urukul across DRTIO.
Needs cleanup and optimization/characterization.
2019-01-27 09:51:24 +08:00
8632b553d2
ddmtd: use IOB register to sample input
2019-01-27 09:50:02 +08:00
d1ef036948
kasli_sawgmaster: initialize SAWG phase according to RTIO TSC
2019-01-27 09:49:31 +08:00
9966e789fc
sayma: simplify Ultrascale LVDS T false path
...
Recommended by Xilinx.
2019-01-25 23:40:48 +08:00
359fb1f207
sayma: fix DDMTD STA
2019-01-25 23:39:19 +08:00
cb04230f86
sayma: SYSREF setup/hold validation demonstration
...
This also removes the standalone target as the ISERDES used
for setup/hold check requires the fine RTIO clock, which in turn
requires a DRTIO transceiver due to the Ultrascale TPWS bug.
2019-01-25 16:58:58 +08:00
