forked from M-Labs/artiq
1
0
Fork 0

firmware: run PRBS and STPL JESD204 tests

This commit is contained in:
Sebastien Bourdeauducq 2019-10-08 00:10:36 +08:00
parent 03007b896e
commit 4b3baf4825
6 changed files with 117 additions and 84 deletions

View File

@ -350,7 +350,6 @@ pub fn setup(dacno: u8, linerate: u64) -> Result<(), &'static str> {
0x1*ad9154_reg::LINK_EN | 0*ad9154_reg::LINK_PAGE |
0*ad9154_reg::LINK_MODE | 0*ad9154_reg::CHECKSUM_MODE);
info!(" ...done");
status(dacno);
Ok(())
}

View File

@ -1,37 +0,0 @@
use board_misoc::csr;
pub fn jesd_reset(reset: bool) {
unsafe {
csr::jesd_crg::jreset_write(if reset {1} else {0});
}
}
pub fn jesd_enable(dacno: u8, en: bool) {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_enable_write)(if en {1} else {0})
}
}
pub fn jesd_ready(dacno: u8) -> bool {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_ready_read)() != 0
}
}
pub fn jesd_prbs(dacno: u8, en: bool) {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_prbs_config_write)(if en {0b01} else {0b00})
}
}
pub fn jesd_stpl(dacno: u8, en: bool) {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_stpl_enable_write)(if en {1} else {0})
}
}
pub fn jesd_jsync(dacno: u8) -> bool {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_jsync_read)() != 0
}
}

View File

@ -42,8 +42,6 @@ mod ad9154_reg;
pub mod ad9154;
/* TODO: #[cfg(has_jdcg)]
pub mod jesd204sync; */
#[cfg(has_jdcg)]
pub mod jdcg;
#[cfg(has_allaki_atts)]
pub mod hmc542;

View File

@ -54,7 +54,7 @@ pub enum Packet {
SpiReadReply { succeeded: bool, data: u32 },
SpiBasicReply { succeeded: bool },
JdacSetupRequest { destination: u8, dacno: u8 },
JdacBasicRequest { destination: u8, dacno: u8, reqno: u8 },
JdacBasicReply { succeeded: bool },
}
@ -181,9 +181,10 @@ impl Packet {
succeeded: reader.read_bool()?
},
0xa0 => Packet::JdacSetupRequest {
0xa0 => Packet::JdacBasicRequest {
destination: reader.read_u8()?,
dacno: reader.read_u8()?,
reqno: reader.read_u8()?,
},
0xa1 => Packet::JdacBasicReply {
succeeded: reader.read_bool()?
@ -341,10 +342,11 @@ impl Packet {
writer.write_bool(succeeded)?;
},
Packet::JdacSetupRequest { destination, dacno } => {
Packet::JdacBasicRequest { destination, dacno, reqno } => {
writer.write_u8(0xa0)?;
writer.write_u8(destination)?;
writer.write_u8(dacno)?;
writer.write_u8(reqno)?;
}
Packet::JdacBasicReply { succeeded } => {
writer.write_u8(0xa1)?;

View File

@ -0,0 +1,98 @@
use board_misoc::{csr, clock};
use board_artiq::drtioaux;
pub fn jesd_reset(reset: bool) {
unsafe {
csr::jesd_crg::jreset_write(if reset {1} else {0});
}
}
fn jesd_enable(dacno: u8, en: bool) {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_enable_write)(if en {1} else {0})
}
clock::spin_us(5000);
}
fn jesd_ready(dacno: u8) -> bool {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_ready_read)() != 0
}
}
fn jesd_prbs(dacno: u8, en: bool) {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_prbs_config_write)(if en {0b01} else {0b00})
}
clock::spin_us(5000);
}
fn jesd_stpl(dacno: u8, en: bool) {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_stpl_enable_write)(if en {1} else {0})
}
clock::spin_us(5000);
}
fn jesd_jsync(dacno: u8) -> bool {
unsafe {
(csr::JDCG[dacno as usize].jesd_control_jsync_read)() != 0
}
}
fn jdac_basic_request(dacno: u8, reqno: u8) {
if let Err(e) = drtioaux::send(1, &drtioaux::Packet::JdacBasicRequest {
destination: 0,
dacno: dacno,
reqno: reqno
}) {
error!("aux packet error ({})", e);
}
match drtioaux::recv_timeout(1, Some(1000)) {
Ok(drtioaux::Packet::JdacBasicReply { succeeded }) =>
if !succeeded {
error!("JESD DAC basic request failed (dacno={}, reqno={})", dacno, reqno);
},
Ok(packet) => error!("received unexpected aux packet: {:?}", packet),
Err(e) => error!("aux packet error ({})", e),
}
}
pub fn init() {
for dacno in 0..csr::JDCG.len() {
let dacno = dacno as u8;
info!("DAC-{} initializing...", dacno);
jesd_enable(dacno, true);
jesd_prbs(dacno, false);
jesd_stpl(dacno, false);
jdac_basic_request(dacno, 0);
jesd_prbs(dacno, true);
jdac_basic_request(dacno, 2);
jesd_prbs(dacno, false);
jesd_stpl(dacno, true);
jdac_basic_request(dacno, 3);
jesd_stpl(dacno, false);
jdac_basic_request(dacno, 0);
let t = clock::get_ms();
while !jesd_ready(dacno) {
if clock::get_ms() > t + 200 {
error!("JESD ready timeout");
break;
}
}
clock::spin_us(5000);
jdac_basic_request(dacno, 1);
if !jesd_jsync(dacno) {
error!("bad SYNC");
}
info!(" ...done");
}
}

View File

@ -15,6 +15,8 @@ use board_artiq::drtio_routing;
use board_artiq::hmc830_7043;
mod repeater;
#[cfg(has_jdcg)]
mod jdcg;
fn drtiosat_reset(reset: bool) {
unsafe {
@ -288,7 +290,7 @@ fn process_aux_packet(_repeaters: &mut [repeater::Repeater],
}
}
drtioaux::Packet::JdacSetupRequest { destination: _destination, dacno: _dacno } => {
drtioaux::Packet::JdacBasicRequest { destination: _destination, dacno: _dacno, reqno: _reqno } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet);
#[cfg(has_ad9154)]
let succeeded = {
@ -296,7 +298,13 @@ fn process_aux_packet(_repeaters: &mut [repeater::Repeater],
const LINERATE: u64 = 5_000_000_000;
#[cfg(rtio_frequency = "150.0")]
const LINERATE: u64 = 6_000_000_000;
board_artiq::ad9154::setup(_dacno, LINERATE).is_ok()
match _reqno {
0 => board_artiq::ad9154::setup(_dacno, LINERATE).is_ok(),
1 => { board_artiq::ad9154::status(_dacno); true },
2 => board_artiq::ad9154::prbs(_dacno).is_ok(),
3 => board_artiq::ad9154::stpl(_dacno, 4, 2).is_ok(),
_ => false
}
};
#[cfg(not(has_ad9154))]
let succeeded = false;
@ -416,41 +424,6 @@ const SI5324_SETTINGS: si5324::FrequencySettings
crystal_ref: true
};
#[cfg(has_jdcg)]
fn init_jdcgs() {
for dacno in 0..csr::JDCG.len() {
let dacno = dacno as u8;
info!("DAC-{} initializing...", dacno);
board_artiq::jdcg::jesd_enable(dacno, false);
board_artiq::jdcg::jesd_prbs(dacno, false);
board_artiq::jdcg::jesd_stpl(dacno, false);
clock::spin_us(10000);
board_artiq::jdcg::jesd_enable(dacno, true);
let t = clock::get_ms();
while !board_artiq::jdcg::jesd_ready(dacno) {
if clock::get_ms() > t + 200 {
error!("JESD ready timeout");
break;
}
}
if let Err(e) = drtioaux::send(1, &drtioaux::Packet::JdacSetupRequest {
destination: 0,
dacno: dacno
}) {
error!("aux packet error ({})", e);
}
match drtioaux::recv_timeout(1, Some(1000)) {
Ok(drtioaux::Packet::JdacBasicReply { succeeded }) =>
if !succeeded { error!("DAC-{} initialization failed", dacno); },
Ok(packet) => error!("received unexpected aux packet: {:?}", packet),
Err(e) => error!("aux packet error ({})", e),
}
info!(" ...done");
}
}
#[no_mangle]
pub extern fn main() -> i32 {
clock::init();
@ -523,9 +496,9 @@ pub extern fn main() -> i32 {
* To handle those cases, we simply keep the JESD204 core in reset unless the
* Si5324 is locked to the recovered clock.
*/
board_artiq::jdcg::jesd_reset(false);
jdcg::jesd_reset(false);
if repeaters[0].is_up() {
init_jdcgs();
jdcg::init();
}
}
@ -545,7 +518,7 @@ pub extern fn main() -> i32 {
{
let rep0_is_up = repeaters[0].is_up();
if rep0_is_up && !rep0_was_up {
init_jdcgs();
jdcg::init();
}
rep0_was_up = rep0_is_up;
}
@ -573,7 +546,7 @@ pub extern fn main() -> i32 {
}
#[cfg(has_jdcg)]
board_artiq::jdcg::jesd_reset(true);
jdcg::jesd_reset(true);
drtiosat_reset_phy(true);
drtiosat_reset(true);