Commit Graph

3870 Commits

Author SHA1 Message Date
mntng 692dc0803b test: add test for SPI core using SD card 2017-07-28 19:10:44 +08:00
Sebastien Bourdeauducq df4f38a1e4 kc705: add pullup on SD card MISO 2017-07-24 22:26:16 +08:00
Sebastien Bourdeauducq 189020344c spi: fix typo in doc 2017-07-20 22:18:21 +08:00
Sebastien Bourdeauducq d0b21a8e85 manual: add short description of drivers, with replace support information. Closes #777 2017-07-20 12:01:29 +08:00
Robert Jördens 471605ec1e pdq: move to https://github.com/m-labs/pdq 2017-07-19 17:35:28 +02:00
Sebastien Bourdeauducq 377c776ec8 examples/dma_blink: replay → playback 2017-07-18 14:01:08 +08:00
Sebastien Bourdeauducq 9898681a38 aqctl_corelog: only set logging.DEBUG after the server is set up
Otherwise asyncio pollutes the log.
2017-07-18 14:00:06 +08:00
whitequark dd87508a7f Implement forwarding of logs from core device to master.
Fixes #691.
2017-07-18 05:31:59 +00:00
whitequark 819440f839 runtime: split log timestamp into secs.micros. 2017-07-18 05:31:59 +00:00
whitequark 9e38132c0a artiq_devtool: don't drop data in unpredictable ways (sigh). 2017-07-18 05:31:59 +00:00
Sebastien Bourdeauducq a201a9abd9 drtio: multilink transceiver interface 2017-07-18 13:27:33 +08:00
Robert Jördens d96c2abe44 pdq: read/write_reg -> get/set_reg
see also m-labs/pdq#14
2017-07-17 21:45:46 +02:00
Sebastien Bourdeauducq 9045b4cc19 drtio: initial firmware support for multi-link 2017-07-18 00:40:21 +08:00
whitequark d06d53b00d firmware: don't bail out if building not from a git checkout (#783). 2017-07-15 03:16:21 +00:00
Sebastien Bourdeauducq 4deb5f6a45 gateware: use new MiSoC Wishbone address system 2017-07-13 19:16:49 +08:00
mntng 40ca951750 kc705: add SPI bus for memory card
This will be useful for SPI unit tests using a SD card as victim.
2017-07-12 00:27:44 +08:00
Robert Jördens f0841f5489 spline: be really verbose
closes #773
2017-07-07 11:43:58 +02:00
Robert Jördens 7b130a2c32 sawg: confirm smooth(order=3) 2017-07-07 11:36:03 +02:00
Robert Jördens 3bc0e32dc0 sawg: advance the timeline on Config access
c.f. #773 #765
2017-07-07 11:33:58 +02:00
Robert Jördens 3222f5036f sawg: describe latency matching in detail 2017-07-06 10:06:21 +02:00
whitequark 1e2603572a runtime: fix a bug causing sockets to get stuck in CLOSE-WAIT. 2017-07-05 16:27:36 +00:00
whitequark 86c027e9c5 artiq_flash: don't require binaries to merely restart FPGA. 2017-07-04 18:55:38 +00:00
whitequark ee1d5dbccb runtime: allow a much larger log buffer and avoid hacks. 2017-07-04 18:18:31 +00:00
whitequark 7a5fbc1622 devtool: forward port 1383 (moninj). 2017-07-04 17:54:18 +00:00
whitequark 4e5ea1bbaf dashboard: fix a crash touching moninj without a connection. 2017-07-04 17:53:48 +00:00
Robert Jördens 2f1029c292 Revert "sawg: advance dds 1/2 by one sample group"
This reverts commit 8e0a1cbdc8.

c.f. #772

The underlying issue is still the same. You will always find something that does not match when trying to compare the DDS with the parallelized DUC. They are just different. I could correct it for phase but then it will fail for amplitude. Or you'll compare the offset channel to phase1 or amplitude1. Let's state that equal things are well synchronized but unequal things may have a deterministic latency difference of strictly less than one coarse RTIO cycle.
2017-07-04 17:55:19 +02:00
Robert Jördens 8e0a1cbdc8 sawg: advance dds 1/2 by one sample group
closes #772
2017-07-04 16:51:58 +02:00
Robert Jördens 91ca9fbcad sawg: also give offset some headroom
closes #771
2017-07-04 16:50:06 +02:00
Robert Jördens 78d1f0fdf6 sawg: fix PhasedAccu resets 2017-07-04 11:56:21 +02:00
Florent Kermarrec 2910b1be5e artiq/gateware/rtio/dma: replace leave_out with omit in Record.connect 2017-07-04 10:48:06 +02:00
Sebastien Bourdeauducq 838127d914 rtio: break DMA timing path 2017-07-02 10:24:01 +08:00
whitequark ea7549cfa4 compiler: coerce `while` condition to bool.
Fixes #768.
2017-07-01 18:59:07 +00:00
Robert Jördens 911ee4a959 rtio: make pipelined logic reset_less
* latency-corrected counters
* registered error logic
2017-06-29 12:55:32 +02:00
Robert Jördens 600a48ac61 dsp.fir: cleanup 2017-06-29 12:18:48 +02:00
Robert Jördens dca662a743 dsp.fir: pipeline final systolic adder 2017-06-29 11:33:19 +02:00
Robert Jördens 32a33500c8 dsp.fir: actively cull zero delays 2017-06-29 11:24:56 +02:00
Robert Jördens f520d4a768 rtio: undo _RelaxedAsyncResetSynchronizer 2017-06-28 22:08:15 +02:00
Robert Jördens 3cbbcdfe96 sawg: don't enable_replace for Config
closes #762
2017-06-28 20:31:40 +02:00
Robert Jördens f2632e0fd1 sawg: adapt latency to fir changes
closes #748
2017-06-28 20:12:30 +02:00
Robert Jördens e7db2c6578 dsp.accu: reset_less outputs 2017-06-28 20:04:58 +02:00
Robert Jördens 6bb994228f dsp.fir: drop x shift 2017-06-28 19:55:15 +02:00
Robert Jördens 01847271c5 rtio: use reset_less signal for reset fanout 2017-06-28 19:43:55 +02:00
Robert Jördens b9859cc0c3 dsp.fir: remove old/wrong comment 2017-06-28 19:21:57 +02:00
Robert Jördens 55b5b87490 fir: simplify latency compensation
Don't try to tweak out the last bit of latency by feeding the HBF input
early. Instead feed it late so the interpolated samples are early and
the latency is an even multiple of the super-sample cycle.
2017-06-28 19:13:43 +02:00
Robert Jördens d1e5dd334f sawg: use pipeline reset 2017-06-28 19:09:39 +02:00
Robert Jördens 6418205906 dsp.fir: use pipelin-reset 2017-06-28 19:09:21 +02:00
whitequark 6a49c114c8 runtime: update smoltcp. 2017-06-28 00:27:22 +00:00
whitequark 370f22541c runtime: update smoltcp. 2017-06-27 21:06:45 +00:00
whitequark f36f00a83d artiq_devtool: do not chop up the TCP stream into 1024 byte chunks.
This makes the smoltcp behavior quite different than without
the TCP forwarding (and can mask smoltcp issues).
2017-06-26 08:39:16 +00:00
whitequark 282f4256e0 artiq_pcap: atomically replace pcap file.
Otherwise this segfaults Wireshark (?!).
2017-06-26 03:22:14 +00:00
whitequark d6f4f1f3bc artiq_devtool, artiq_pcap: better option naming. 2017-06-26 00:00:05 +00:00
whitequark 6061393bd0 tools: lazily import paramiko. 2017-06-25 07:17:03 +00:00
whitequark 816ec6c52f artiq_pcap: implement. 2017-06-25 07:04:29 +00:00
whitequark 69fa9b38e0 test: actually run test_embedding.AsyncTest. 2017-06-25 05:28:32 +00:00
whitequark 31b52ff1b3 coredevice: do not desync kernel TCP stream on RPCReturnValueError.
And propagate the error upwards instead of trying to squeeze it
through the core device in futility.
2017-06-25 04:47:32 +00:00
whitequark fdb24ef139 coredevice: truncate overlong exception messages.
If we have a really long one (megabytes) then this may exhaust
the heap of the core device and crash it.
2017-06-25 04:39:08 +00:00
whitequark 1fa8be3835 artiq_devtool: don't loop forever if core device dies. 2017-06-25 04:18:45 +00:00
whitequark f17a6616b2 runtime: ensure management interface buffer can hold log buffer.
Otherwise we get weird edge cases where the network stack could try
to append to log buffer while management interface is holding
the log buffer and trying to push it out, and it's just no good.

The serialized log buffer at its maximum length is slightly longer
than 32 KiB, so we just allocate the largest possible TCP buffer
to the management interface to keep it simple.
2017-06-24 17:09:28 +00:00
whitequark d0f72632e1 language: export TBytes and TByteArray. 2017-06-24 17:03:35 +00:00
whitequark 12357d884e runtime: update smoltcp. 2017-06-24 16:55:59 +00:00
Robert Jördens 07f5e99140 dsp/sat_add: works after previous changes 2017-06-22 18:24:22 +02:00
Robert Jördens f78d5a87e9 dsp/test: skip and fix sat_add 2017-06-22 18:01:31 +02:00
Robert Jördens 47928a2c0d sawg: disable limiter
temporary workaround to permit testing other aspects
2017-06-22 17:31:04 +02:00
Robert Jördens cd2ac53bc5 dsp/sat_add: make width mandatory 2017-06-22 17:28:39 +02:00
Robert Jördens 9b940aa876 dsp/sat_add: spell out logic more 2017-06-22 16:55:13 +02:00
Robert Jördens d0cf0f2b87 sawg/limiter: make signed signals explicitly 2017-06-22 13:44:36 +02:00
Robert Jördens 53be34a25f sawg: clear phase accu in reset 2017-06-22 13:27:49 +02:00
Robert Jördens 694f8d784c dsp/tools: unittest sat_add 2017-06-22 11:29:56 +02:00
Robert Jördens bd1438d28e sawg: wrap limits init values 2017-06-22 10:26:29 +02:00
Robert Jördens cccd01e81e sawg: cleanup sat_add logic 2017-06-22 10:26:29 +02:00
Robert Jördens 5f6e665158 test/sawg: patch delay_mu 2017-06-22 10:26:29 +02:00
Robert Jördens 570f2cc1ff dsp/tools/SatAdd: fix reuse of clipped signal 2017-06-22 10:26:29 +02:00
Robert Jördens 4b3aad2563 sawg: clean up Config
* unify I and Q data limiters. there is no conceivable way why they
would be different.
* reorder clr bits to be like consistent
* move the sat add limiter to before the hbf again
2017-06-22 10:26:29 +02:00
Robert Jördens f4c6879c76 sawg: special case Config RTIO address 2017-06-22 10:26:29 +02:00
Robert Jördens ff0da2c9fc sawg: stage code for y-data exchange on channels 2017-06-22 10:26:29 +02:00
Robert Jördens b6569df02f dsp/tools: clean up SatAddMixin logic 2017-06-22 10:26:29 +02:00
Robert Jördens f369cb97f7 sawg/examples: add a bit more slack 2017-06-22 10:26:29 +02:00
Chris Ballance 05b57f5110 protocols: increase another asyncio line limit (#671) 2017-06-22 09:43:52 +08:00
Sebastien Bourdeauducq c2cc29142d drtio: remove misleading comment from device_db 2017-06-21 18:34:53 +08:00
Sebastien Bourdeauducq 6262969d46 test: relax test_dma_record_time 2017-06-21 18:33:58 +08:00
Sebastien Bourdeauducq 64ce85445c drtio: add remote converter SPI example (#740) 2017-06-21 17:08:12 +08:00
Sebastien Bourdeauducq 74cf074538 drtio: remove sawg_3g from example targets, add converter SPI bus from FMC-EBZ at all times 2017-06-21 17:01:52 +08:00
Sebastien Bourdeauducq 66dee9d1ad drtio: send/process I2C and SPI aux packets (#740) 2017-06-21 16:50:51 +08:00
Sebastien Bourdeauducq f58f16ccd4 drtioaux: add default timeout 2017-06-21 16:23:11 +08:00
Sebastien Bourdeauducq 7675dd063b drtioaux: add I2C and SPI packets (#740) 2017-06-21 14:07:16 +08:00
Sebastien Bourdeauducq c74de6ae96 phaser: reintroduce test_ad9154_status 2017-06-20 00:49:57 +08:00
Sebastien Bourdeauducq 8c56a95fa2 spi: add default busno 2017-06-20 00:49:38 +08:00
Sebastien Bourdeauducq 39ddb66f0f phaser: add AD9154 SPI access driver to example ddb 2017-06-20 00:49:21 +08:00
Sebastien Bourdeauducq 470bce6214 coredevice: add AD9154 SPI access driver 2017-06-20 00:48:50 +08:00
Sebastien Bourdeauducq a6d06824e7 fix indentation 2017-06-20 00:12:11 +08:00
Sebastien Bourdeauducq 8f2d85fc5b add back ad9154_reg.py 2017-06-19 23:45:32 +08:00
Sebastien Bourdeauducq c86029bca2 i2c: expose restart as syscall, add structure for I2C-over-DRTIO 2017-06-19 23:44:51 +08:00
Sebastien Bourdeauducq 268b7d8aaf typo 2017-06-19 15:42:10 +08:00
Sebastien Bourdeauducq 09d198c7a1 test: add test for exception on non-existent I2C bus 2017-06-19 15:32:09 +08:00
Sebastien Bourdeauducq d08bd58dff versioneer: cut git hashes consistently (#753) 2017-06-19 15:31:48 +08:00
Sebastien Bourdeauducq 6c6bb67618 libboard: fix compiler warning on not(has_i2c) 2017-06-19 14:57:15 +08:00
Sebastien Bourdeauducq 5d63489080 i2c,spi: add busno error detection 2017-06-19 14:27:30 +08:00
Robert Jördens 0d8067256b rtio: refactor RelaxedAsyncResetSynchronizer 2017-06-18 14:37:08 +02:00
Sebastien Bourdeauducq 8399f8893d add kernel access to non-realtime SPI buses (#740) 2017-06-18 12:45:07 +08:00
Robert Jördens 424b2bfbd8 rtio: describe rio and rio_phy domains a bit more 2017-06-17 12:21:07 +02:00
Robert Jördens 219dfd8984 rtio: add one register level for rio and rio_phy resets
* This should give Vivado some wiggle room during PnR.
* It needs three new clock domains which is ugly. But since
AsyncResetSynchronizer can only drive clock domains resets directly
there seems to be no other way to add one register level currently.
2017-06-17 12:17:48 +02:00
Sebastien Bourdeauducq 8fea361412 firmware: always use 8 characters to abbreviate git commit hashes 2017-06-17 14:43:50 +08:00
Robert Jördens e19bfd4781 test_sawg_fe: add ref_multiplier to simulated core 2017-06-16 19:45:24 +02:00
Robert Jördens b5772f478a sawg: add channel reset (closes #751) 2017-06-16 19:31:57 +02:00
Robert Jördens 2a76034fbc cri: add note about clearing of o_data 2017-06-16 19:06:00 +02:00
Robert Jördens fecc42fd0c sawg/phaser: expand documentation (closes #750) 2017-06-14 11:49:52 +02:00
Robert Jördens 858c1be381 sawg: expand documentation 2017-06-13 18:51:48 +02:00
Robert Jördens 3f37870e25 sawg: register pre-hbf adder 2017-06-13 18:15:44 +02:00
Robert Jördens e229edd5d5 sawg: add register after hbf for timing 2017-06-12 23:08:27 +02:00
Robert Jördens 315338fca9 test/sawg: test HBF overshoot, fix sim patching 2017-06-12 20:35:47 +02:00
Robert Jördens 9a8a7b9102 sawg: handle clipping interpolator
* give 1 bit headroom to interpolator to handle overshoot
* fix Config limiter widths (NFC)
* move clipper to behind the HBF to correctly shield DUC

This leaves a factor of two headroom for the sum of the following
effects:

  * HBF overshoot (~15 % of the step)
  * A1/A2 DDS sum

While this is technically not sufficient and can still lead to
overflows, it is unlikely that one would trigger those. It would require
doing large amplitude A1, large amplitude A2 and additionally doing
amplitude/phase jumps that would overshoot the HBF. No sane person would
try that, right?

closes #743
2017-06-12 20:33:54 +02:00
Robert Jördens 1fb3995ffc Revert "fir/ParallelHBFUpsampler: add headroom (gain=2)"
This reverts commit 6ac9d0c41e.

Overshooting behavior must to be handled outside the FIR.
2017-06-12 20:07:25 +02:00
Robert Jördens 332bcc7f3b fir: check widths 2017-06-12 20:07:23 +02:00
Robert Jördens 39a1dcbb3d test/fir: look at overshoot behavior 2017-06-12 20:06:07 +02:00
Robert Jördens 6ac9d0c41e fir/ParallelHBFUpsampler: add headroom (gain=2)
This addresses part of #743
2017-06-12 18:59:45 +02:00
Robert Jördens 566ff73dff pdq: unify spi-PDQ and usb-PDQ protocols 2017-06-10 15:03:25 +02:00
Robert Jördens 6c54c0f834 sawg: update example 2017-06-10 11:52:48 +02:00
Robert Jördens d8aee931ba sawg: extend phase mode docs 2017-06-09 12:26:49 +02:00
whitequark f7254dd3ce compiler.validators.constness: take AugAssign into account. 2017-06-09 07:31:08 +00:00
whitequark ad2ee714c2 compiler: do not permit iterating str values.
This currently breaks badly on UTF-8, and doesn't even return
a value of a correct type.
2017-06-09 07:29:31 +00:00
whitequark 4e7493843a compiler: Constness is a validator, not analysis. 2017-06-09 07:29:31 +00:00
whitequark 5d841d08e9 compiler: do not permit mutation of bytes values (#714). 2017-06-09 07:29:28 +00:00
whitequark 284382b1f5 compiler: add support for bytearray values in RPC (#714). 2017-06-09 07:15:25 +00:00
whitequark 9ed4e9c1cd compiler: add support for printing of bytearray values (#714). 2017-06-09 07:15:25 +00:00
whitequark e9564b15c8 compiler: add support for bytearray type (#714). 2017-06-09 07:15:24 +00:00
whitequark 5b4fde30a8 compiler: unbreak subscripts for bytes values (#714). 2017-06-09 07:10:48 +00:00
whitequark 66a683f583 compiler: add support for bytes values in RPC (#714). 2017-06-09 07:10:48 +00:00
whitequark 778e7dc2ab compiler: add support for concatenating bytes values (#714). 2017-06-09 07:10:48 +00:00
whitequark 7b2da5294f compiler: add support for printing of bytes values (#714). 2017-06-09 07:10:48 +00:00
whitequark dba4e1a28b compiler: add support for bytes type and b"x" literals (#714). 2017-06-09 07:10:48 +00:00
whitequark d0e92067c3 ksupport: fix UB. 2017-06-09 06:18:20 +00:00
Robert Jördens 91ad2bc600 sawg: add note about disabled q-exchange 2017-06-07 09:13:01 +02:00
Robert Jördens 94273e9455 sawg: add non-mu methods for limiter 2017-06-07 09:12:36 +02:00
Sebastien Bourdeauducq ebb4660207 coredevice: compare software and gateware versions strictly 2017-06-07 02:11:54 +08:00
Sebastien Bourdeauducq f3c7a7de3b phaser: remove non-functional SPI examples
Those will be reimplemented after we have converter SPI access, but this will not be part of the 3.0 release.
2017-06-06 17:37:13 +08:00
Sebastien Bourdeauducq ab493a860d coredevice: fix socket resource leak 2017-06-05 15:45:40 +08:00
Sebastien Bourdeauducq bea7a47349 coredevice: compare gateware and software versions on release numbers only. Closes #738 2017-06-05 13:52:24 +08:00
Sebastien Bourdeauducq 9c973793df update versioneer 2017-06-05 13:27:26 +08:00
Sebastien Bourdeauducq 92307d1f9c fix some missing pdq2→pdq renames 2017-06-03 18:35:36 +08:00
Robert Jördens 2458da1ade pdq: get new host driver, adapt 2017-05-31 00:20:10 +02:00
Robert Jördens 2895448477 sawg: link Spline in docs 2017-05-23 10:33:04 +02:00
Robert Jördens 52625d57f0 sawg: explain DUC 2017-05-23 10:28:23 +02:00
Robert Jördens bfc224d4ba phaser: adjust to new jesd 2017-05-22 19:59:53 +02:00
Robert Jördens 679060af1d phaser: enable dma 2017-05-22 19:32:34 +02:00
Robert Jördens 06721c19c4 sawg: work around bool->int 2017-05-22 18:50:58 +02:00
Robert Jördens 1562f79101 sawg: expose config channel 2017-05-22 18:27:42 +02:00
Robert Jördens 4901cb9a8a sawg: fix clr width 2017-05-22 17:46:55 +02:00
Robert Jördens 253ee950f6 sawg: fix config channel addr 2017-05-22 17:45:14 +02:00
Sebastien Bourdeauducq e845de2ff2 remove aqcli_pdq2 2017-05-22 19:17:23 +08:00
Sebastien Bourdeauducq e4a631a3d7 scheduler: consider the pipeline flushed if everything has a lower priority than us. Closes #640 2017-05-22 18:43:59 +08:00
Sebastien Bourdeauducq 5fc953119e fix usage of CommMgmt 2017-05-22 17:32:11 +08:00
Sebastien Bourdeauducq 6bdb76e9ea core device logging controller WIP (#691) 2017-05-22 16:48:00 +08:00
Sebastien Bourdeauducq 5ccca74a3f fold comm device into core device 2017-05-22 15:45:45 +08:00
Sebastien Bourdeauducq e7382f4753 fix test_ctlmgr 2017-05-22 15:04:46 +08:00
Sebastien Bourdeauducq 0ae5e6d8b1 test_lda: more thorough and consistent test of simulation mode 2017-05-22 00:26:05 +08:00
Sebastien Bourdeauducq 3ed70afaa1 Use commandline prefix for controllers
This keeps them better organized and consistent with the artiq_* naming scheme.
Tab completion from aqctl_ also lists all the controllers installed on a machine.
2017-05-22 00:22:10 +08:00
Sebastien Bourdeauducq c83e15d040 artiq_corelog: cleanup 2017-05-22 00:06:03 +08:00
Sebastien Bourdeauducq 8cf0628435 fix lit tests 2017-05-18 23:41:01 +08:00
Sebastien Bourdeauducq b7a94d466d fix experiment name conflict in phaser example 2017-05-18 23:14:55 +08:00
Sebastien Bourdeauducq cd757c0f16 generate device database from executable python file 2017-05-18 23:14:55 +08:00
Florent Kermarrec db3e1aef77 examples/phaser: adapt test_ad9154_prbs to new prbs in fabric 2017-05-15 16:12:02 +02:00
Sebastien Bourdeauducq 9ab63920e0 Remove Pipistrello support
Closes #658
Closes #381
2017-05-15 17:17:44 +08:00
Sebastien Bourdeauducq ad85a0cee3 add session manager (#691) 2017-05-15 17:05:22 +08:00
Chris Ballance 0b6fb95deb firmware: fix revision of compiler_builtins for satman 2017-05-13 15:12:53 +01:00
Robert Jördens 170d2886fd Merge branch 'pdq'
* pdq:
  pdq: documentation
  pdq2 -> pdq
  pdq2: use 16 bit data, buffered read_mem()
  spi: style
  pdq2: mem_read
  pdq2: align subsequent writes to end
  sma_spi: undo cri_con
  pdq2: memory write, kernel_invariants
  sma_spi: cri/cd changes
  sma_spi: LVCMOS25
  coredevice.spi: kernel invariants and style
  sma_spi: free up user_sma pins
  sma_spi: add demo target with SPI on four SMA
  pdq2: memory write
  pdq2: crc/frame register accessors
  doc: pdq2 spi backend
  pdq2: config writes
2017-05-12 11:46:45 +02:00
Robert Jördens fed24309b8 pdq: documentation 2017-05-02 18:55:02 +02:00
Robert Jördens 1a1edb13bf pdq2 -> pdq 2017-05-02 18:05:41 +02:00
Florent Kermarrec 79c339d4ac gateware/targets/phaser: jesd core now handles jsync completely 2017-04-26 22:25:08 +02:00
Chris Ballance 8ebb33c05c master: record time run() is called 2017-04-26 23:36:19 +08:00
Florent Kermarrec 0546affd4c gateware/target/phaser: jesd start signal renamed to jsync 2017-04-26 12:27:40 +02:00
whitequark bb64992395 compiler: remove dead code. 2017-04-21 18:38:43 +00:00
whitequark c5d7445973 compiler: reject reachable implicit return if not returning TNone.
Fixes #718.
2017-04-21 18:11:14 +00:00
whitequark ed2b10c5aa compiler: in codegen for delay(), round fp instead of truncating.
Consider delay(8*us). It results in the following computation...
  >>> 8*1e-06/1e-09
  7999.999999999999
with the result promptly getting truncated to 7999.

Fixes #706.
2017-04-21 17:36:44 +00:00
whitequark a820ae98cf ksupport: avoid allocations on I/O error paths.
Fixes #715.
2017-04-21 17:20:50 +00:00
whitequark b913d1d6f2 runtime: make a copy of startup/idle kernel firmware before loading.
Fixes #716.
2017-04-21 16:46:40 +00:00
whitequark 726ee7370a runtime: update smoltcp.
This brings in correct TIME-WAIT handling. Fixes #722.
2017-04-21 16:08:04 +00:00
whitequark 0e68eaa879 runtime: print a heap dump on out-of-memory condition. 2017-04-21 14:48:10 +00:00
whitequark fd994ceef3 DMA: various fixes to bring tests in line. 2017-04-20 20:05:03 +00:00
whitequark db494967c5 firmware use Rust 0.18.0. 2017-04-19 09:38:24 +00:00
Sebastien Bourdeauducq fe05aede78 firmware: DmaPlayback → DMARetrieve 2017-04-19 11:11:42 +08:00
Sebastien Bourdeauducq e8f7f8ef9c DMA: speed up playback
Time reduced from 1.53µs to 1.37µs.
2017-04-19 10:59:12 +08:00
whitequark 41c4de4556 DMA: add API for a much faster replay using handles. 2017-04-18 08:20:12 +00:00
whitequark c6e8d5c901 runtime: allow setting UART log level explicitly.
This is way more convenient than commenting out parts
of session.rs when debugging.
2017-04-15 08:27:18 +00:00
whitequark 0531dc45c3 DMA: erase trace before re-recording it.
Or we could needlessly OOM replacing a large trace.
2017-04-15 07:48:02 +00:00
whitequark 9dfe9c1248 DMA: improve recording performance.
This commit moves DMA serialization code to the kernel CPU
(to cope with the existence of rtio_output_wide) and batches
the resulting sequences. This results in less data being transferred
between kernel and comms CPUs (24 octets with one pointer before,
18 octets with no pointers now, for the common case of rtio_output),
but most importantly reduces cache flushes, which now happen
once per 64k octets.

On average, it now takes about 15us to record a single RTIO event
in a DMA trace.

Fixes #712.
2017-04-15 07:29:52 +00:00
whitequark ea753bed17 runtime: advise to set panic_reboot=1 on panic. 2017-04-15 07:29:36 +00:00
Robert Jördens 534e681d0b pdq2: use 16 bit data, buffered read_mem() 2017-04-13 20:49:46 +02:00
Robert Jördens 90cf11994e spi: style 2017-04-13 13:38:29 +02:00
Robert Jördens 8446cccb4e pdq2: mem_read 2017-04-13 13:38:13 +02:00
whitequark 0b9601f12d artiq_devtool: more robust defaults. 2017-04-13 08:26:48 +00:00
whitequark 3a1fc729cf compiler: refactor type annotations recognizing in kernels.
The new implementation is much more generic, more robust,
and shares code with the same for syscalls as well as RPCs.

Fixes #713.
2017-04-13 08:26:10 +00:00
whitequark 31048f4b6a compiler: fix monomorphization of coerced integer literals.
Fixes #703.
2017-04-12 04:11:47 +00:00
whitequark 296dc3b0c4 artiq_coreboot: allow hot-rebooting the device. 2017-04-11 03:24:24 +00:00
whitequark 1bd4d13391 artiq_compile: make print() write to core log, not an invalid op.
Fixes #710.
2017-04-11 03:16:34 +00:00
Robert Jördens 20652ce128 pdq2: align subsequent writes to end 2017-04-09 13:50:19 +02:00
Robert Jördens ed8edf318d sma_spi: undo cri_con 2017-04-08 17:19:35 +02:00
Robert Jördens 78dd4b8614 pdq2: memory write, kernel_invariants 2017-04-08 17:16:19 +02:00
Robert Jördens 16b7f8f50c sma_spi: cri/cd changes 2017-04-08 17:16:19 +02:00
Robert Jördens 1e6e81a19e sma_spi: LVCMOS25 2017-04-08 17:16:19 +02:00
Robert Jördens 0838981bed coredevice.spi: kernel invariants and style 2017-04-08 17:16:19 +02:00