M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 1
Code Issues Projects Releases Wiki Activity
8,112 Commits 13 Branches 35 Tags 27 MiB
Commit Graph

6490 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq 35d21c98d3 Revert "runtime: expose rint from libm" 
Consistency with NAR3/Zynq where rint is not available.

This reverts commit f5100702f6.
 2021-10-11 08:12:04 +08:00
Sebastien Bourdeauducq f5100702f6 runtime: expose rint from libm 2021-10-10 20:40:17 +08:00
Sebastien Bourdeauducq 3c1cbf47d2 phaser: add more slack during init. Closes #1757 2021-10-10 16:18:55 +08:00
Robert Jördens 3f6bf33298 fastino: add interpolator support 2021-10-08 15:47:07 +00:00
occheung 59065c4663 alloc_list: support alloc w/ large align 
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
 2021-10-07 12:38:03 +08:00
Spaqin 1894f0f626
gateware: share RTIOClockMultiplier and fix_serdes_timing_path (#1760) 2021-10-07 08:19:38 +08:00
Etienne Wodey a8333053c9 sinara_tester: add device_db and test selection CLI options 
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
 2021-09-27 17:44:50 +08:00
Sebastien Bourdeauducq 3ed10221d8 compiler: remove big-endian support. Closes #1590 2021-09-13 13:40:24 +08:00
Sebastien Bourdeauducq e8a7a8f41e compiler: work around idiotic windoze behavior that causes conda ld.lld not to be found 2021-09-13 10:40:54 +08:00
Sebastien Bourdeauducq ffb1e3ec2d wavesynth: np.int is deprecated 2021-09-13 07:02:35 +08:00
Sebastien Bourdeauducq 2d79d824f9 firmware: remove minor or1k leftovers 2021-09-12 20:03:37 +08:00
occheung a573dcf3f9 board_misoc/build: use rv32 as target arg 
The original rv64 argument was only to match the misoc counterpart.
 2021-09-10 14:11:23 +08:00
occheung 448974fe11 runtime/main: cleanup 2021-09-10 13:59:53 +08:00
occheung b091d8cb66 kernel: flush cache before mod_init 
This could be necessary as redirecting instructions from D$ directly to I$ as it seems.
Related: https://github.com/SpinalHDL/VexRiscv/issues/137
 2021-09-10 13:25:12 +08:00
occheung 5394d04669 test_spi: add delay 2021-09-10 13:25:12 +08:00
occheung b8ed5a0d91 alloc: fix alignment for riscv32 arch 2021-09-10 13:25:12 +08:00
occheung 2213e7ffac ksupp/rtio/exception: fix timestamp 2021-09-10 13:25:12 +08:00
occheung 09ffd9de1e dma: fix timestamp fetch 2021-09-10 13:25:12 +08:00
occheung 051a14abf2 rtio/dma: fix endianness 2021-09-10 13:25:12 +08:00
occheung c6ba0f3cf4 ksupport: fix dma cslice (ffi) 2021-09-10 13:25:12 +08:00
occheung c812a837ab runtime: enlarge stack size 2021-09-10 13:25:12 +08:00
occheung a596db404d satman: fix cargo xbuild sysroot 2021-09-10 13:25:12 +08:00
occheung 4fab267593 cargo: std dependency hack 2021-09-10 13:25:12 +08:00
occheung dcbd9f905c cargo: use cargo xbuild 2021-09-10 13:25:12 +08:00
occheung 9f6b3f6014 firmware: clarify target triple 
The lack of compressed instruction support can be inferred from the target triple, literally.
 2021-09-10 13:25:12 +08:00
occheung 4619a33db4 test: remove broken array return tests 
Removed test cases that do not respect lifetime/scope constraint.
See discussion in artiq-zynq repo: M-Labs/artiq-zynq#119
Referred to the patch from @dnadlinger. 5faa30a837
 2021-09-10 13:25:12 +08:00
occheung 5985f7efb5 syscall: lower nowrite to inaccessiblememonly 
In the origin implementation, the `nowrite` flag literally means not writing memory at all.
Due to the usage of flags on certain functions, it results in the same issues found in artiq-zynq after optimization passes. (M-Labs/artiq-zynq#119)
A fix wrote by @dnadlinger can resolve this issue. (c1e46cc7c8)
 2021-09-10 13:25:12 +08:00
Sebastien Bourdeauducq 6db7280b09 flake: board package WIP 2021-09-10 13:25:12 +08:00
occheung d8ac429059 dyld: streamline lib.rs 
Only riscv32 is supported anyway, no need to have excessive architecture check.
 2021-09-10 13:25:12 +08:00
occheung 798774192d slave_fpga/bootloader: read in little endian 2021-09-10 13:25:12 +08:00
occheung eecd825d23 firmware: suppress warning 2021-09-10 13:25:12 +08:00
occheung 1da0554a49 pcr: purge 2021-09-10 13:25:12 +08:00
occheung 5d0a8cf9ac llvm_ir_gen: fix indent 2021-09-10 13:25:12 +08:00
occheung 70507e1b72 Cargo.lock: update 2021-09-10 13:25:12 +08:00
occheung c113cd6bf5 libfringe: bump 2021-09-10 13:25:12 +08:00
occheung 61b0170a12 firmware: purge or1k 2021-09-10 13:25:12 +08:00
occheung af263ffe1f ksupport: fix rpc, cache signature (FFI) 
The reason of the borrow stuff is explained in M-Labs/artiq-zynq#76 (artiq-zyna repo).
As for `cache_get()`, compiler will perform stack allocation to pre-allocate the returned structure, and pass to cache_get alongside the `key`.
However, ksupport fails to recognize the passed memory, so it will always assume the passed memory as the key.
 2021-09-10 13:25:12 +08:00
occheung a833974b50 analyzer: fix endianness 2021-09-10 13:25:12 +08:00
occheung d623acc29d llvm_ir_gen: fix now with now_pinning & little-endian target 2021-09-10 13:25:12 +08:00
occheung 8fa47b8119 rpc: enforce alignment 2021-09-10 13:25:12 +08:00
occheung de0f2d4a28 firmware: adopt endianness protocol in artiq-zynq 
Related:
artiq-zynq: M-Labs/artiq-zynq#126
artiq: #1588
 2021-09-10 13:25:12 +08:00
occheung 9afe63c08a ksupport: fix proto_artiq dependency 2021-09-10 13:25:12 +08:00
occheung 29a2f106d1 ksupport: replace asm with llvm_asm 2021-09-10 13:25:12 +08:00
occheung b30ed75e69 kernel.ld: load elf header and prog headers 
ld.lld has a habit of not putting the headers under any load sections.
However, the headers are needed by libunwind to handle exception raised by the kernel.
Creating PT_LOAD section with FILEHDR and PHDRS solves this issue. Other PHDRS are also specified as linkers (not limited to ld.lld) will not create additional unspecified headers even when necessary.
 2021-09-10 13:25:12 +08:00
occheung 279593f984 ksupport.ld: merge sbss with bss 2021-09-10 13:25:12 +08:00
occheung 1ba8c8dfee runtime: remove irq again 2021-09-10 13:25:12 +08:00
occheung 3d629006df makefiles: revert byte-swaps 2021-09-10 13:25:12 +08:00
occheung 7542105f0f board_misoc: remove pcr 
VexRiscv seems to not support additional hardware performance counter, at least I have not seen any documentation on how to use it.
 2021-09-10 13:25:12 +08:00
occheung 01ca114c66 runtime: remove irq dependency 2021-09-10 13:25:12 +08:00
occheung 36171f2c61 runtime: remove inaccurate sp on panic 2021-09-10 13:25:12 +08:00
occheung 01e357e5d3 ksupport.ld: reduce load section alignment 2021-09-10 13:25:12 +08:00
occheung f77b607b56 compiler: generate symbols 2021-09-10 13:25:12 +08:00
occheung 1293e0750e ld, makefiles: use ld.lld 2021-09-10 13:25:12 +08:00
occheung fc42d053d9 kernel: use vexriscv 2021-09-10 13:25:12 +08:00
occheung 1b516b16e2 targets: default to vexriscv cpu 2021-09-10 13:25:12 +08:00
Sebastien Bourdeauducq e8fe8409b2 libartiq_support: compatibility with recent stable rustc 2021-09-10 13:25:12 +08:00
Sebastien Bourdeauducq cabe5ace8e compiler: remove DebugInfoEmitter for now 
Causes problems with LLVM 9 and not needed at first.
 2021-09-10 13:25:12 +08:00
Sebastien Bourdeauducq 6629a49e86 compiler: use LLVM binutils/linker for Arm as well 
Previously we kept GNU Binutils because they are less of a pain to support
on Windoze - the source of so many problems - but with RISC-V we need to
update LLVM anyway.
 2021-09-10 13:25:12 +08:00
Sebastien Bourdeauducq 43d120359d compiler: switch to upstream llvmlite and RISC-V target 2021-09-10 13:25:12 +08:00
Sebastien Bourdeauducq 5656e52581 remove profiler 2021-09-10 13:25:12 +08:00
occheung 1b8b4baf6a ksupport: fix panic, libc, unwind 2021-09-10 13:25:12 +08:00
occheung 905330b0f1 ksupport: handle riscv exceptions 2021-09-10 13:25:12 +08:00
occheung 50a62b3d42 liballoc: change align to 16 bytes 2021-09-10 13:25:12 +08:00
occheung 7f0bc9f7f0 runtime/makefile: specify emulation, flip endianness 2021-09-10 13:25:12 +08:00
occheung c42adfe6fd runtime.ld: merge .sbss & .bss 2021-09-10 13:25:12 +08:00
occheung f56152e72f rust: fix dependencies 2021-09-10 13:25:12 +08:00
occheung c800b6c8d3 runtime: update rust alloc, managed 2021-09-10 13:25:09 +08:00
occheung e99061b013 runtime: add riscv 2021-09-10 13:23:22 +08:00
occheung ecedec577c runtime: impl riscv exception handling 2021-09-10 13:23:15 +08:00
occheung 252594a606 runtime: impl riscv panic handler 2021-09-10 13:20:31 +08:00
occheung 31bf17563c personality: update from rust/panic_unwind 2021-09-10 13:20:31 +08:00
occheung bfddd8a30f libdyld: add riscv support 2021-09-10 13:20:31 +08:00
occheung ad3037d0f6 libc: add minimal C types 2021-09-10 13:20:31 +08:00
occheung daaf6c3401 libunwind: add rust interface 2021-09-10 13:20:31 +08:00
occheung 6d9cebfd42 satman: handle .sbss generation 2021-09-10 13:20:31 +08:00
occheung 96438c9da7 satman: make fbi big-endian 2021-09-10 13:20:31 +08:00
occheung 6535b2f089 satman: fix feature 2021-09-10 13:20:31 +08:00
occheung 45adaa1d98 satman: add riscv exception handling 2021-09-10 13:20:31 +08:00
occheung 869a282410 satman: use riscv 2021-09-10 13:20:31 +08:00
occheung ebb9f298b5 proto_artiq: update alloc type path 2021-09-10 13:20:31 +08:00
occheung 97a0132f15 libio: update alloc type path 2021-09-10 13:20:31 +08:00
occheung 37ea863004 libio: pin failure version 2021-09-10 13:20:31 +08:00
occheung 3ff74e0693 bootloader: handle .sbss generation in .ld 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung 448fe0e8cf bootloader: fix panic 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung 8294d7fea5 bootloader: swap endianness 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung 13032272fd bootloader: add rv32 exception handler 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung 46102ee737 board_misoc: build vectors.S with rv64 target in misoc 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung b87ea79d51 rv32: rm irq & vexriscv-rust 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung 9aee42f0f2 rv32/boot: remove hotswap 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
occheung 82b4052cd6 libboard_misoc: vexriscv integration 
Signed-off-by: occheung <dc@m-labs.hk>
 2021-09-10 13:20:31 +08:00
Leon Riesebos 2cf144a60c ddb_template: edge counter keys correspond with according ttl keys 
previously ttl_counter_0 and ttl_0 could be on completely different physical ttl output channels
with this change, ttl_0_counter (note the changed key format) is always on the same channel as ttl_0

Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-09-06 09:06:04 +08:00
Etienne Wodey 4d7bd3ee32 phaser: fail init() if frame timestamp measurement times out 
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
 2021-09-03 12:01:26 +02:00
Etienne Wodey 075cb26dd7 phaser: rename get_next_frame_timestamp() to get_next_frame_mu() 
and implement review comments (PR #1749)

Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
 2021-09-03 09:58:01 +02:00
Etienne Wodey 7aebf02f84 phaser: docs: add reference to get_next_frame_timestamps(), fix typo 
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
 2021-09-01 17:44:46 +02:00
Etienne Wodey 61b44d40dd phaser: add labels to debug init prints 
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
 2021-09-01 17:43:30 +02:00
Etienne Wodey 65f8a97b56 phaser: add helpers to align updates to the RTIO timeline 
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
 2021-09-01 17:42:54 +02:00
SingularitySurfer 65f63e6927 fix suservo start 2021-08-19 07:38:48 +00:00
Robert Jördens a53162d01d tester: tweak suservo 
* p gain 1 to get reasonable power
* refine testing instructions and comments
 2021-08-19 09:17:14 +02:00
SingularitySurfer 4d21a72407 Implement SUServo tester. 2021-08-18 15:10:27 +00:00
Mikołaj Sowiński 898122f3e5
Added support for HVAMP_8CH (#1741) 2021-08-16 13:39:00 +08:00
Sebastien Bourdeauducq 420891ba54 syntax 2021-08-12 13:01:35 +08:00
Sebastien Bourdeauducq 9f94bc61ae missing part of 477b1516d 2021-08-12 12:55:37 +08:00
Sebastien Bourdeauducq c69a1316ad compiler: stop using sys.version_info for parser 2021-08-12 12:52:24 +08:00
Sebastien Bourdeauducq 477b1516d3 remove profiler 2021-08-12 12:51:55 +08:00
Sebastien Bourdeauducq 67847f98f4 artiq_run: fix multiarch 2021-08-12 12:48:10 +08:00
mwojcik 7879d3630b made kc705/gtx interface more similar to kasli/gtp 2021-08-10 18:53:52 +08:00
Sebastien Bourdeauducq 242dfae38e kc705: fix DRTIO targets 2021-08-06 15:41:47 +08:00
Star Chen 5111132ef0
ICAP: prevent sayma from using it (#1740) 2021-08-06 15:08:30 +08:00
Sebastien Bourdeauducq dc546630e4 kc705: DRTIO variants WIP 2021-08-06 14:41:41 +08:00
Robert Jördens fd824f7ad0 ddb_template: print LED channel nos on Kasli v2 2021-08-05 17:29:38 +02:00
Harry Ho c9608c0a89 zotino: default div_read unified with ad53xx at 16, fix ad53xx doc 2021-08-05 17:42:11 +08:00
Star Chen 6b88ea563d
talk to ICAP primitive to restart gateware (#1733) 2021-08-05 17:00:31 +08:00
Sebastien Bourdeauducq 97e994700b compiler: turn __repr__ into __str__ when sphinx is used. Closes #741 2021-08-05 11:32:20 +08:00
Sebastien Bourdeauducq c3d765f745 ad9910: fix type annotations 2021-08-05 11:30:54 +08:00
Sebastien Bourdeauducq 53a98acfe4 artiq_flash: cleanup openocd handling, do not follow symlinks 
Not following symlinks allows files to be added to OpenOCD via nixpkgs buildEnv.
 2021-07-26 17:01:24 +08:00
Star Chen 30e5e06a33
moninj: fix read of incomplete data (#1729) 2021-07-22 17:56:38 +08:00
Star Chen ebb67eaeee
applets: add length warning message on plot for `plot_xy_hist` and fix bug (#1725) 2021-07-19 15:45:48 +08:00
Star Chen 943a95e07a
applets: add data length warning message for `plot_xy` (#1722) 2021-07-19 15:14:15 +08:00
Star Chen e996b5f635
applets: fix warning timing 2021-07-19 12:26:01 +08:00
Sebastien Bourdeauducq 4fb8ea5b73 artiq_flash: determine which firmware to flash by looking at filesystem 
Closes #1719
 2021-07-14 16:43:00 +08:00
Star Chen 5cd721c514
applets: add plot_hist dataset length mismatch warning (#1718) 2021-07-14 15:57:55 +08:00
Star Chen 6ce9c26402
GUI: add option to create new datasets (#1716) 2021-07-13 12:53:35 +08:00
occheung 2204fd2b22 adf5356: add delay to sync() 
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
 2021-07-08 10:03:20 +08:00
pca006132 b10d1bdd37 compiler: proper union find 
The find implementation was not very optimized, and the unify function
did not consider tree height and may build some tall trees.
 2021-07-07 09:22:16 +08:00
pca006132 4ede58e44b compiler: reduce calls to TypedTreeHasher 
We need to check if our inference reached a fixed point. This is checked
using hash of the types in the AST, which is very slow. This patch
avoids computing the hash if we can make sure that the AST is definitely
changed, which is when we parse a new function.

For some simple programs with many functions, this can significantly
reduce the compile time by up to ~30%.
 2021-07-07 09:22:16 +08:00
pca006132 822e8565f7 compiler: supports kernel decorators with path 2021-07-02 17:01:31 +08:00
pca006132 6fb31a7abb compiler: allow empty list in quote 2021-07-02 15:16:19 +08:00
pca006132 0806b67dbf compiler: speedup list processing 2021-07-02 14:22:25 +08:00
pca006132 f531af510c compiler: fixed embedding annotation evaluation 2021-06-25 11:32:23 +08:00
pca006132 c29a149d16 compiler: allows string annotation 
According to PEP484, type hint can be a string literal for forward
references. With PEP563, type hint would be preserved in annotations in
string form.
 2021-06-25 11:01:48 +08:00
Etienne Wodey 68268e3db8 docs: fix some formatting issues 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-23 20:29:43 +08:00
Etienne Wodey cca654bd47 test_device_db: fix on Windows (tempfile access limitations) 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-21 16:47:22 +08:00
Etienne Wodey 8bedf278f0 set_dataset: pass HDF5 options as a dict, not as loose kwargs 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-17 16:43:05 +02:00
Etienne Wodey 12ef907f34 master/databases: fix AttributeError in DatasetDB.set() 
Add corresponding unit test.

Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-17 16:30:38 +02:00
Etienne Wodey d8b1e59538 datasets: allow passing options to HDF5 backend (e.g. compression) 
This breaks the internal dataset representation used by applets
and when saving to disk (``dataset_db.pyon``).

See ``test/test_dataset_db.py`` and ``test/test_datasets.py``
for examples.

Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-17 12:04:16 +02:00
Etienne Wodey b8ab5f2607 master/databases: use tools.file_import to load the device_db 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-17 07:58:17 +08:00
Etienne Wodey 5c23e6edb6 test: add regression tests for master.databases.DeviceDB 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-06-17 07:58:17 +08:00
Sebastien Bourdeauducq 7046aa9c23 compiler: stop using deprecated numpy.float 2021-06-15 10:48:34 +08:00
Sebastien Bourdeauducq ea0c7b6173 Merge remote-tracking branch 'harrydrtio/k7-drtio' 2021-06-15 10:04:45 +08:00
Star Chen 9dee8bb9c9
Kasli: Added front panel user LED (#1623) (#1694) 2021-06-07 16:05:50 +08:00
pca006132 bcb030cc9c
aqctl_corelog: fix endianness issue (closes #1682) (#1689) 
Fixed according to
https://forum.m-labs.hk/d/190-fetchingreading-the-core-log-in-a-central-location/10

Tested with both KC705 and ZC706.
 2021-06-03 14:06:17 +08:00
Sebastien Bourdeauducq ea1dd2da43 artiq_ddb_template: kasli-soc support 2021-05-30 20:33:44 +08:00
Leon Riesebos 07bd1e27c1 artiq_flash: wrap paramiko commands in bash login shell 
the login shell will load the nix environment on non-nixos systems

Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-05-27 21:44:10 +08:00
pca006132 4c743cf8af revert busy polling 2021-05-23 14:07:11 +08:00
pca006132 1e9a131386 coredevice.comm_kernel: performance improvement 
reduced latency by busy polling, and improved byte list performance.
 2021-05-23 13:30:00 +08:00
Harry Ho 43b2a3791c jsonschema: only allow enable_sata_drtio=true for Kasli if v1.0/1.1 2021-05-17 12:46:19 +08:00
Sebastien Bourdeauducq 935e18c1be artiq_flash: improve openocd not found error message 2021-05-13 14:45:23 +08:00
Marius Weber 129cf8c1dd Phaser: Make set_nco_phase set the phase of the NCO 
Previous to this commit `set_nco_phase()` set the phase of the DUC instead
of the NCO. Setting the phase of the NCO may be desirable to utilise the
auto-sync functionality of the double-buffered DAC-NCO settings.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-11 23:16:14 +01:00
Marius Weber 043c9c20d7 phaser: Improve documentation of DAC settings 
1. Clarify which features require additional configuration via the `dac`
   constructor argument.
2. Document when DAC settings apply immediatly/are staged.
3. Document how staged DAC settings may be applied
4. Calrify operation of `dac_sync`

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:58:30 +01:00
Marius Weber f97baa8aec phaser: workaround malformed output with `mixer_ena=1` & `nco_ena=0` 
When Phaser is powered on and `init()` is first called, enabling the
DAC-mixer while leaving the NCO disabled causes malformed output.
This commit implements a workaround by making sure the NCO is enabled,
before being set to the disired state.

This commit also avoids the following procedure, resulting in
malformed output:
1. Operate Phaser with the DAC Mixer and NCO enabled
2. Set the NCO to a non-zero frequency
3. Disable the NCO in the device_db
4. Re-initialise Phaser

After this procedure, with CMIX disabled, incorrect output is produced.
To clear the fault one must re-enable the NCO and write the NCO freqeuncy
to zero before disabling the NCO.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 4fa2028671 phaser: fix coarse mixer register offset 
The CMIX bits are bits 12-15 in register 0x0d. This has been checked
against the datasheet and verified on hardware. Until now, the bit for
CMIX1 was written to CMIX0. The CMIX0 bit was written to a reserved bit.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 515cfa7dfb Phaser: expose coarse mixer and document need to enable the DAC-mixer. 
in some use cases a larger tunable range than available via the DUC may
be needed. Some use cases may wish to combine the coarse mixer with the
DUC to extend the tunable range.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 4f812cc4ed Phaser: zero oscillator amplitude after `init()` (close #1651) 
Currently, `init()` leaves a single oscillator at full scale. The phase
accumulator of this oscillator is held continuously cleared. Provided no
upconverting mechanism is active (DUC, CMIX, NCO), this produces a full-scale
DC voltage. The DC voltage is blocked by hardware capacitors. This behaviour
is not mentioned by the `init` documentation.

If one attempts to use any other oscillator without reducing the amplitude
of the oscillator enabled by `init`, there is by significant clipping.

In the case that the NCO or CMIX are configured via the device_db
(suggested in the docs), leaving the osillator at full scale results in
full RF output power after calling `init()`. This may plausibly damage loads
driven by phaser.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 407fba232d Phaser upconverter: set phase-frequency detector to 62.5 MHz (close #1648) 
The suitable PFD clock depends on the use case and will likely need
to be configured by some users. All things being equal, a higher PFD
clock is desirable as is results in lower local oscillator phase-noise.

Phaser was designed around a maximum PFD clock of 62.5 MHz. In integer mode,
with no local oscillator frequency divisor set, a 62.5 MHz PFD clock results
in a 125 MHz local oscillator step size. Given the +-200 MHz range of the DUC
(more if using the DAC mixer), this step size will be acceptable to many.
This seems like the most appropreate default configuration as it should offer
the best phase-noise performance.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 75445fe5f0 Phaser: expose and automate clearing of DAC `sif_sync` (close #1630 and #1650) 
`sif_sync` must be triggered to apply NCO frequency changes. To achieve per
channel frequency tunability exeeding the range of the DUC, the NCO frequeny must
adjusted. User code will need to trigger `sif_sync` to achieve this.

`sif_sync` can only be triggered if the bit was cleared. To avoid this pitfall,
the clearing of `sif_sync` is automated.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 1c96797de5 Phaser upconverter: Follow datasheet procedure for VCO calibration (close #1643) 
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber 7404152e4c Phaser upconverter: rename `ndiv` -> `nint` to match datasheet (close #1638) 
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:47 +01:00
Marius Weber eb477ee06b phaser: print gw_rev in debug mode 2021-05-08 14:48:46 +01:00
Marius Weber c7e992e26d Phaser: flake8 
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-05-08 14:48:46 +01:00
Sebastien Bourdeauducq eb38b664e3 phaser: typo 2021-05-07 10:00:10 +08:00
Peter Drmota 47bf5d36af coredevice.comm_kernel: Fix unpacking of lists of numpy.int64 
test.coredevice.test_embedding: Add tests for list of numpy.int64
 2021-04-21 15:46:58 +01:00
Leon Riesebos af4fadcd54 added DefaultMissing to __all__ 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-04-21 11:42:21 +08:00
Leon Riesebos a0cea3a011 added __iter__ and __len__ to ScanObject base class 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-04-21 11:42:21 +08:00
Leon Riesebos 2671c271d4 ad99xx unified type annotations for cfg_sw() methods and fixed test cases 
closes #1642

Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-04-21 11:29:55 +08:00
Leon Riesebos d745d50245 ad99xx added additional kernel invariants 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-04-21 11:18:31 +08:00
Leon Riesebos 4a6201c083 ad99xx make kernel invariants instance variable 
prevents mutations on class variable that applies to all instances at once
closes #1654

Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-04-21 11:18:31 +08:00
Robert Jördens ffe1c9f9b1
Merge pull request #1628 from pathfinder49/fastino_mu_fix 
fastino: ensure `xxx_to_mu()` methods return int32 on the host
 2021-04-15 15:02:12 +02:00
Marius Weber bda5aa7c7e fastino: ensure `xxx_to_mu()` methods return int32 on the host 
Currently running `voltage_to_mu()` or `voltage_group_to_mu()` on the host will
convert all machine unit values to int64. This leads to issues when machine units
are returned from RPCs.

Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
 2021-04-15 11:41:22 +01:00
David Nadlinger b7f3eaebf9 gui: Fix occasional wrong fuzzy select menu position on KDE/Linux 2021-04-04 00:04:11 +01:00
Harry Ho fc59791583 jsonschema: mirny: fix clk_sel default value 2021-03-30 16:06:56 +08:00
Harry Ho 8002fcf8bb jsonschema: style 2021-03-29 17:49:43 +08:00
Harry Ho 5f32cb7196 jsonschema: mirny: accept string enums for validating clk_sel 2021-03-29 17:49:43 +08:00
Harry Ho 75efb8985c ddb_template: mirny_cpld: accept clk_sel as a string 2021-03-29 17:49:43 +08:00
David Nadlinger bdaaf3c1d7 dashboard: Disable Group CCB policy menu before first entry is selected 
It was possible to crash the dashboard by opening the context menu
before an applet entry had been selected for the first time (e.g.
immediately after startup) and selecting one of the Group CCB
actions, as the enable update slot would not have been run.
 2021-03-21 02:04:24 +00:00
David Nadlinger 6fd088e339 test/lit: Fix invalid type inference test 
This broke after b8cd163978, but
is invalid code to start with; this would have previously
crashed the code generator had the code actually been compiled.

(Allowing implicit conversion to bool would be a separate debate.)
 2021-03-21 01:46:52 +00:00
David Nadlinger be4669d7a5 compiler: Fix crash with try/finally and stack-return function calls 
The previous code could have never worked as-is, as the result slot
went unused, and it tried to append the load instruction to the
block just terminated with the invoke.

GitHub: Fixes #1506, #1531.
 2021-03-21 01:31:26 +00:00
David Nadlinger 1f40f3ce15 compiler: Map host numpy.bool_ values to TBool 
Since we don't implement any integer-like operations for TBool
(addition, bitwise not, etc.), TBool is currently neither
strictly equivalent to builtin bool nor numpy.bool_, but through
very obvious compiler errors (operation not supported) rather than
silently different runtime behaviour.

Just mapping both to TBool thus is a huge improvement over the
current behaviour (where numpy.False_ is a true-like object). In
the future, we could still implement more operations for TBool,
presumably following numpy.bool_ rather than the builtin type,
just like builtin integers get translated to the numpy-like
TInt{32,64}.

GitHub: Fixes #1275.
 2021-03-20 00:54:41 +00:00
David Nadlinger b8cd163978 compiler: Fix type inference for "ternary" if expressions 
Previously, any type would be accepted for the test expression,
leading to internal errors in the code generator if the passed
value wasn't in fact a bool.
 2021-03-20 00:27:25 +00:00
David Nadlinger 888696f588 coredevice: Fix RPC typing for bool lists/arrays 
GitHub: Fixes #1635.
 2021-03-20 00:03:10 +00:00
Leon Riesebos d04bcd8754 add get_*() functions to ad9910, ad9912, and urukul. closes #1616 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-03-15 13:06:24 +08:00
Leon Riesebos c22f731a61 added typing and reformatted driver for ad9910, ad9912, and urukul 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-03-15 13:06:24 +08:00
David Nadlinger 5ba22c11c3 compiler: Change type inference rules for empty array() calls 
array([...]), the constructor for NumPy arrays, currently has the
status of some weird kind of macro in ARTIQ Python, as it needs
to determine the number of dimensions in the resulting array
type, which is a fixed type parameter on which inference cannot
be performed.

This leads to an ambiguity for empty lists, which could contain
elements of arbitrary type, including other lists (which would
add to the number of dimensions).

Previously, I had chosen to make array([]) to be of completely
indeterminate type for this reason. However, this is different
to how the call behaves in host NumPy, where this is a well-formed
call creating an empty 1D array (or 2D for array([[], []]), etc.).

This commit adds special matching for (recursive lists of) empty
ListT AST nodes to treat them as scalar dimensions, with the
element type still unknown.

This also happens to fix type inference for embedding empty 1D
NumPy arrays from host object attributes, although multi-dimensional
arrays will still require work (see GitHub #1633).

GitHub: Fixes #1626.
 2021-03-14 22:48:43 +00:00
David Nadlinger c707ccf7d7 compiler: Properly implement NumPy array slicing 
Strided slicing of one-dimensional arrays (i.e. with non-trivial
steps) might have previously been working, but would have had
different semantics, as all slices were copies rather than a view
into the original data.

Fixing this in the future will require adding support for an index
stride field/tuple to our array representation (and all the
associated indexing logic).

GitHub: Fixes #1627.
 2021-03-14 20:02:59 +00:00
David Nadlinger 557671b7db compiler: Fix type inference in slice expressions 
This was a long-standing issue affecting both lists and
the new NumPy array implementation, just caused by the
generic inference passes not being run on the slice
subexpressions (and thus e.g. ints not being monomorphized).

GitHub: Fixes #1632.
 2021-03-14 18:46:28 +00:00
David Nadlinger 75c255425d compiler: Linguistically untangle comment [nfc] 2021-03-14 18:40:21 +00:00
Leon Riesebos b8f4c6b9bb added test case for get_experiment() with nested class 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-02-28 14:26:44 +08:00
Leon Riesebos 1deaa758ce get_experiment() is able to get nested experiment classes using dots in class names. 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-02-28 14:26:44 +08:00
Leon Riesebos 3c68223337 replaced deprecated inspect.getargspec() with inspect.getfullargspec() 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-02-28 14:25:05 +08:00
Leon Riesebos cd7f9531d7 added abstract describe method to ScanObject 
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
 2021-02-28 14:25:05 +08:00
Sebastien Bourdeauducq 92fd705990 increase memory allocated to comms CPU 
See discussion in #1612.
 2021-02-21 19:06:12 +08:00
Sebastien Bourdeauducq 8deb269b9a update major version 2021-02-17 16:18:05 +08:00
Sebastien Bourdeauducq 14d464b4cf update copyright year 2021-02-17 15:52:08 +08:00
Etienne Wodey 3cd96a951a master: refactor experiments enumeration, use tools.get_experiment 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-02-13 10:06:12 +08:00
Etienne Wodey 2ca9b64ba1 test: add unit tests for tools.file_import and tools.get_experiment 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-02-13 10:06:12 +08:00
Sebastien Bourdeauducq d33a206f04 eem: fix Urukul QSPI after 9ef5717de8 (2) 2021-02-12 13:17:48 +08:00
Astro 3844cde97b jsonschema: validate hw_dev depending on target 2021-02-12 11:09:01 +08:00
Sebastien Bourdeauducq 22ce5b0299 eem: fix Urukul QSPI after 9ef5717de8 2021-02-12 10:59:53 +08:00
Etienne Wodey af411de639 tools/file_import: simplify, remove deprecated load_module() call 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-02-10 16:03:31 +08:00
Sebastien Bourdeauducq e54dd08821 metlino,sayma: adapt to new EEM API 
This also enables 4X SERDES TTLs.
 2021-02-10 15:32:10 +08:00
Sebastien Bourdeauducq 547254e89e eem_7series: pass through kwargs 2021-02-10 15:31:49 +08:00
Sebastien Bourdeauducq 49299c00a9 eem: enable DCI for LVDS TTL 2021-02-10 15:31:25 +08:00
Sebastien Bourdeauducq 9ef5717de8 eem: support different I/O standards in EEM slots 2021-02-10 15:31:05 +08:00
Drew 48a1c305c1 master: fix DeprecationWarning on logger.warn 
Resolves error message shown.

The following error message is shown when worker_impl.py:199 is run: 

```
WARNING:worker(RID,EXPERIMENT):py.warnings:/nix/store/77sw4p03cb7rdayx86agi4yqxh5wq46b-python3.7-artiq-5.7141.1b68906/lib/python3.7/site-packages/artiq/master/worker_impl.py:199: DeprecationWarning: The 'warn' function is deprecated, use 'warning' instead
  logging.warn(message)
```
 2021-02-10 15:27:22 +08:00
Astro 461199b903 kasli_generic: warn if min_artiq_version is not met 2021-02-10 15:26:15 +08:00
Astro 4b2ed67dd7 coredevice_generic.schema.json: add "min_artiq_version" 2021-02-10 15:26:15 +08:00
Sebastien Bourdeauducq cf9cf0ab6f ttl_serdes_7series: add dci (HP bank) support 2021-02-07 22:32:18 +08:00
Sebastien Bourdeauducq 997a48fb31 ttl_serdes_ultrascale: fix, add dummy dci argument 2021-02-07 22:31:46 +08:00
Sebastien Bourdeauducq bbe0c9162a ttl_serdes_ultrascale: cleanup 2021-02-07 22:00:33 +08:00
Sebastien Bourdeauducq 3572e2a9c7 ttl_serdes_7series: fix 2021-02-07 21:41:13 +08:00
Sebastien Bourdeauducq 88c212b84f ttl_serdes_7series: cleanup 2021-02-07 21:33:21 +08:00
Sebastien Bourdeauducq db25f4e8f7 ttl_serdes_7series: use simpler I/O buffers 
In theory equivalent with these parameters.
 2021-02-07 20:10:37 +08:00
Sebastien Bourdeauducq 6bd9691ba8 gateware: remove TTL dead code 2021-02-07 19:58:02 +08:00
Sebastien Bourdeauducq bfacd1e5b3 eem: fix Grabber cc_0-2 signal definitions 2021-02-07 18:01:05 +08:00
Sebastien Bourdeauducq f7a33a1f99 gateware: make 7-series EEM handling functions shareable 2021-02-07 14:34:26 +08:00
Sebastien Bourdeauducq 1213f78ee9 jsonschema: support kasli_soc 2021-02-07 13:39:01 +08:00
Robert Jördens 2f5ea67b69
Merge pull request #1596 from airwoodix/fix-adf5356-init 
coredevice/adf5356: fix initial device detection
 2021-02-02 18:20:08 +01:00
Etienne Wodey d691b05d78 coredevice/mirny: better error handling for clk_sel 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-02-02 16:23:47 +01:00
Etienne Wodey 78e1b9f8e5 sinara_tester/mirny: remove hw_rev checking fixup code 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-01-29 18:47:40 +01:00
Etienne Wodey 6f8e788620 coredevice/mirny: support human readable clk_sel 
In init(), read hw_rev to derive clk_sel code from user string.

Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-01-29 18:46:47 +01:00
Etienne Wodey a8bc98a77b coredevice/adf5356: fix initial device detection 
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
 2021-01-28 18:29:40 +01:00
David Nadlinger f9872bb7b8 coredevice: Handle prematurely closed sockets in comm_kernel receive loop 
recv() returns 0 instead of data if the socket has already
been closed. This is translated into a zero-length list on
the Python layer. Previously, the code would enter an
infinite loop if the socket was closed while attempting
to receive data.
 2021-01-26 18:10:49 +08:00
David Nadlinger f1fd42ea98 coredevice: Re-enable TCP keepalive 
This partially reverts commit b5e1bd3fa2,
which had removed keepalive. This, however, led to experiments
hanging forever if the core device had dropped the connection
(e.g. to a kernel CPU panic, or the device being rebooted).

The chosen keepalive settings are fairly conservative (with the
10 s timeout) to avoid any possible interaction with smoltcp's
3 s ARP try interval (see GitHub issue #1150), even though this
should be a non-issue now due to the larger ARP cache.
 2021-01-26 18:10:49 +08:00
pca006132 8148fdb8a7
use device endian for core device protocols (#1591) 2021-01-22 16:33:21 +08:00
Harry Ho a0fd5261ea kc705: cleanup 2021-01-22 11:11:13 +08:00
Harry Ho 7c4eed7a11 kc705: simplify DRTIO master & satellite 
* KC705 master: user can no longer choose whether or not the SMA acts as the 2nd DRTIO channel; SFP and SMA now act as the 1st and 2nd channel respectively by default.
* KC705 satellite: user should now use `--sma` to enable using the SMA as the satellite channel; SFP acts as the satellite channel by default.
 2021-01-22 11:11:13 +08:00
David Nadlinger 1e443a3aea coredevice: Reuse Target.little_endian for protocol endianness [nfc] 2021-01-21 09:11:54 +01:00
pca006132 ec72eeda46 coredevice: use device endian for kernel and RPC 2021-01-21 09:07:48 +01:00
pca006132 3832b261b1 firmware: optimize integer array/list rpc 2021-01-21 09:05:17 +01:00
Harry Ho 88b14082b6 drtio/transceiver/gtx: delete obsolete modules 2021-01-20 15:05:32 +08:00
Harry Ho 9daf77bd58 kc705: add multichannel support on satellite 
* Two DRTIO channels (i.e. satellite and repeater) are enabled by default.
* User can choose either the SFP or SMA as the satellite channel (by passing `--drtio-sat sfp` or --drtio-sat sma` to the argparser), and the unchosen would become the repeater channel.
 2021-01-20 15:05:32 +08:00
Harry Ho 52afd4ef6b kc705: add GTX multilane support, add multichannel support on master 
* One DRTIO master channel is enabled by default.
* User can set the SMA as the 2nd master channel (by passing --drtio-sma to the argparser).
* Multi-channel (i.e. with repeaters) on KC705 satellite is supported but has not been implemented yet.
 2021-01-20 15:05:32 +08:00
Harry Ho f6d39fd6ba kc705: revive DRTIO master with updated syntax 
* KC705 master variant now uses Si5324 as synthesiser.
* Multi-channel has not been implemented yet.
 2021-01-20 15:05:31 +08:00
Harry Ho f25e86e934 kc705: revive DRTIO satellite with updated syntax, update GTX 
* Multi-channel has not been implemented yet.
 2021-01-20 11:25:38 +08:00
David Nadlinger c229e76d07 compiler: Add accidentally omitted note to invalid RPC type diagnostic 
Might be a minor quality-of-life employment, but there
isn't a test case for this anyway.
 2021-01-20 01:49:16 +01:00
Robert Jördens 261870bdee phaser: fix oscillator rtio address for even base addresses 
close #1580
 2021-01-19 16:56:50 +01:00
David Nadlinger f11aef74b4 gui: Add context menu entry to close all applets 
This is occasionally very useful if a large number of
applets were left open (e.g. spawned via CCB).
 2021-01-17 11:56:03 +01:00
Sebastien Bourdeauducq c675488a99 reorganize JSON schema files 2021-01-16 10:43:14 +08:00
Astro c6807f4594 kasli_generic: validate description against schema, use defaults from schema 2021-01-16 10:35:23 +08:00
Astro 45b5cfce05 gateware: add a kasli_generic.schema.json 2021-01-16 10:35:23 +08:00
David Nadlinger 9b39b1e328 test: Add coredevice tests for matrix multiplication 
Also includes a regression test specifically for
mixing multiple types in one kernel.
 2021-01-12 03:02:07 +01:00
David Nadlinger f0284b2549 compiler: Fix collision of environments in matmult implementations 
GitHub: Fixes #1578.
 2021-01-12 03:02:07 +01:00
David Nadlinger 362f8ecb69 compiler: Add test for disallowing type-unstable array-assign binops 2021-01-12 03:02:07 +01:00
David Nadlinger 96692791cf compiler: Implement assigning binops for arrays 
GitHub: Fixes #1579.
 2021-01-12 03:02:07 +01:00
pca006132 5b5db1433b Revert "compiler: enabled vectorize option" 
This reverts commit 636898c302.
 2021-01-11 19:43:12 +08:00
pca006132 636898c302 compiler: enabled vectorize option 2021-01-11 16:31:24 +08:00
occheung 6a5f5088e2 frontend: sinara_tester: add mirny test 
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
 2021-01-05 17:01:01 +08:00
Harry Ho cff7bcc122 Merge branch 'master' (43be383c86) into k7-drtio 2020-12-31 13:30:46 +08:00
Harry Ho dc7addf394 Revert "drtio: remove KC705/GTX support" 
This reverts commit ebdbaaad32.
 2020-12-31 13:29:50 +08:00
Chris Ballance 43be383c86 kasli v2.0: drive TX_DISABLE low on all SFPs (fixes #1570) 
This was the same problem as #1508 but on SFP1..3
 2020-12-23 00:10:12 +08:00
Harry Ho 43ecb3fea6 sayma: add comments about CPLL line rate on KU GTH 2020-12-19 17:05:20 +08:00