mirror of
https://github.com/m-labs/artiq.git
synced 2024-12-26 03:38:25 +08:00
Phaser: expose coarse mixer and document need to enable the DAC-mixer.
in some use cases a larger tunable range than available via the DUC may be needed. Some use cases may wish to combine the coarse mixer with the DUC to extend the tunable range. Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
This commit is contained in:
parent
4f812cc4ed
commit
515cfa7dfb
@ -570,6 +570,27 @@ class Phaser:
|
||||
self.dac_write(0x1f, config1f & ~int32(1 << 1))
|
||||
self.dac_write(0x1f, config1f | (1 << 1))
|
||||
|
||||
@kernel
|
||||
def set_dac_cmix(self, fs_8_step):
|
||||
"""Set the DAC coarse mixer frequency for both channels
|
||||
|
||||
The selected coarse mixer frequency becomes active without explicit
|
||||
synchronisation.
|
||||
|
||||
Use of the coarse mixer requires the DAC mixer to be enabled. The mixer
|
||||
can be configured via the `dac` device_db entries.
|
||||
|
||||
:param fs_8_step: coarse mixer frequency shift in 125 MHz steps. This
|
||||
should be an integer between -3 and 4 (inclusive).
|
||||
"""
|
||||
# values recommended in data-sheet
|
||||
# 0 1 2 3 4 -3 -2 -1
|
||||
vals = [0b0000, 0b1000, 0b0100, 0b1100, 0b0010, 0b1010, 0b0001, 0b1110]
|
||||
cmix = vals[fs_8_step%8]
|
||||
config0d = self.dac_read(0x0d)
|
||||
delay(.1*ms)
|
||||
self.dac_write(0x0d, (config0d & ~(0b1111 << 12)) | (cmix << 12))
|
||||
|
||||
@kernel
|
||||
def get_dac_alarms(self):
|
||||
"""Read the DAC alarm flags.
|
||||
@ -784,6 +805,9 @@ class PhaserChannel:
|
||||
"""Set the NCO frequency.
|
||||
The frequency is only applied after DAC synchronisation.
|
||||
|
||||
Use of the NCO requires the DAC mixer to be enabled. The mixer can be
|
||||
configured via the `dac` device_db entries.
|
||||
|
||||
:param ftw: NCO frequency tuning word (32 bit)
|
||||
"""
|
||||
self.phaser.dac_write(0x15 + (self.index << 1), ftw >> 16)
|
||||
@ -794,6 +818,9 @@ class PhaserChannel:
|
||||
"""Set the NCO frequency in SI units.
|
||||
The frequency is only applied after DAC synchronisation.
|
||||
|
||||
Use of the NCO requires the DAC mixer to be enabled. The mixer can be
|
||||
configured via the `dac` device_db entries.
|
||||
|
||||
:param frequency: NCO frequency in Hz (passband from -400 MHz
|
||||
to 400 MHz, wrapping around at +- 500 MHz)
|
||||
"""
|
||||
|
Loading…
Reference in New Issue
Block a user