Florent Kermarrec
76ddb063cf
gateware/targets/sayma: get hmc830/7043 spi working (still need to test clock generation)
2017-11-06 12:08:28 +01:00
Florent Kermarrec
5bd1e43ced
gateware/serwb: cleanup imports, use buffered SyncFIFO in EtherboneRecordSender
2017-11-03 12:15:14 +01:00
d80cf8d59d
kc705: add TTLs and shift register driver for FMC DIO
2017-10-31 23:14:39 +08:00
d5b5076f67
gateware/ad5360_monitor: fix SPI data decoding
2017-10-26 11:58:59 +08:00
412548a86c
gateware: add AD5360 monitor (untested)
2017-10-23 20:09:28 +08:00
5803ac9998
gateware: add Zotino SPI to NIST CLOCK target
2017-10-23 15:04:30 +08:00
4fa823b62a
gateware: add support for SPI-over-LVDS
2017-10-23 15:04:01 +08:00
893be82ad1
rtio/dma: raise underflow in test
2017-10-09 10:22:58 +08:00
a9c9d5779d
rtio/dma: add full-stack test with connection to RTIO core
2017-10-08 22:38:02 +08:00
5f083f21a4
rtio/dma: fix signal width
2017-10-08 22:37:46 +08:00
c7de233208
Merge Sayma SAWG changes (untested)
...
See #798
* sinara:
conda: bump migen
sayma_amc: SAWG (untested)
sayma_rtm: make build dir
conda: jesd204b 0.4
2017-09-29 21:01:02 +02:00
b4c52c34f7
Merge branch 'sinara'
2017-09-30 01:11:16 +08:00
6c049ad40c
rtio: report channel numbers in asynchronous errors
2017-09-29 16:32:57 +08:00
5437f0e3e3
rtio: make sequence errors consistently asychronous
2017-09-29 14:40:06 +08:00
5e3cc83842
sayma_amc: SAWG (untested)
2017-09-27 18:44:35 +02:00
2604806512
sayma_rtm: make build dir
2017-09-27 18:35:46 +02:00
73043c3464
drtio: disable SED lane spread
...
Doesn't improve things as the buffer space would still be determined
by the full FIFO, and adds unnecessary logic.
2017-09-26 16:46:09 +08:00
d7ef07a0c2
rtio/sed: document architecture
2017-09-26 16:44:23 +08:00
e6f0ce3aba
rtio/sed: test latency compensation
2017-09-26 16:11:21 +08:00
9905b8723b
rtio/sed: support negative latency compensation
2017-09-26 16:11:08 +08:00
f079ac6af6
rtio/sed: disable wait in TestLaneDistributor.test_regular
2017-09-26 16:10:52 +08:00
4112e403de
rtio/sed: latency compensation
2017-09-26 15:09:07 +08:00
e430d04d3f
drtio: remove obsolete import
2017-09-24 12:49:21 +08:00
20d79c930c
drtio: use SED and input collector
2017-09-24 12:23:47 +08:00
aa8fc81a87
rtio: allow specifying glbl_fine_ts_width externally
2017-09-23 22:34:55 +08:00
5cf0693758
rtio: use BlindTransfer to report collision and busy errors to sys domain
2017-09-21 22:31:56 +08:00
d74a7d272e
rtio: fix/cleanup parameters
2017-09-21 15:59:48 +08:00
07d3f87c51
rtio/sed: min_space → buffer_space
2017-09-21 14:36:13 +08:00
d8aa75b742
rtio/sed: add minimum buffer space reporting
2017-09-20 11:27:57 +08:00
63e39dec94
style
2017-09-20 11:26:12 +08:00
9ccd95e10d
drtio: remove spurious signals
2017-09-19 20:48:12 +08:00
7249f151a5
targets/kc705_drtio_satellite: add missing shebang line
2017-09-19 20:48:12 +08:00
171a2d19a0
drtio: remove spurious signals
2017-09-19 20:47:37 +08:00
1ff10785dc
targets/kc705_drtio_satellite: add missing shebang line
2017-09-19 20:46:16 +08:00
ddcd6065e8
rtio: drive InputCollector.coarse_timestamp
2017-09-19 17:46:38 +08:00
ff8e17ab89
rtio: use input collector module
2017-09-19 15:53:35 +08:00
4dc80e3d05
rtio: add missing import
2017-09-19 15:53:23 +08:00
06a0707c00
rtio: add simulation unit test for input collector
2017-09-19 15:30:44 +08:00
d37577a8a1
rtio: add input collector module
2017-09-19 15:30:30 +08:00
6dc9cad2c9
rtio: add explanation about cri.counter
2017-09-19 12:05:12 +08:00
81d6317053
rtio/sed: take global fine TS width
2017-09-18 11:30:49 +08:00
65baca8c57
rtio: clean up error-prone rtlink.get_or_zero()
2017-09-17 16:11:36 +08:00
0824e0aeae
gateware/targets: remove deprecated ofifo_depth parameter
2017-09-16 17:04:11 +08:00
e2c1d4f3d5
rtio/sed: trigger collision error on non-data replace
2017-09-16 17:01:23 +08:00
0e25154e25
rtio/sed: quash writes to LogChannel
2017-09-16 15:19:30 +08:00
1cfe90b1d9
rtio/sed/Gates: fix fine_ts_width computation
2017-09-16 15:09:21 +08:00
30e7765a2e
drtio: add missing import
2017-09-16 14:36:27 +08:00
a3bb6c167c
rtio: use SED
2017-09-16 14:13:42 +08:00
131f5e4a3b
rtio/sed/LaneDistributor: fix CRI address
2017-09-16 14:13:01 +08:00
25c644c663
rtio/sed: add top-level core unit test
2017-09-16 14:05:08 +08:00
a155a481b1
rtio/sed: add top-level core
2017-09-16 14:04:56 +08:00
92c63ce2e4
rtio/sed: rename fifos/gates, refactor tsc
2017-09-16 14:03:48 +08:00
ac52c7c818
rtio/sed/LaneDistributor: style
2017-09-16 14:02:37 +08:00
7b299ba583
rtio/sed: remove obsolete ofifo_depth from test_output_driver
2017-09-16 14:01:19 +08:00
6b7a1893c7
rtio/sed/OutputDriver: support channels with different fine timestamp widths
2017-09-16 10:53:30 +08:00
f39ee7ad62
rtio/sed: fix seqn_width
2017-09-16 10:52:37 +08:00
064503f224
rtio/sed/LaneDistributor: support specifying existing CRI
2017-09-16 10:52:13 +08:00
1cb05f3ed5
rtio/sed/LaneDistributor: persist underflow/sequence error until next write
2017-09-16 10:51:44 +08:00
3c922463a0
style
2017-09-15 15:36:46 +08:00
8e5ab90129
rtio/sed: add FIFO wrapper
2017-09-15 15:36:34 +08:00
490c9815a2
rtio/sed: add TSC/gate (untested)
2017-09-14 19:53:21 +08:00
181cb42ba8
rtio/sed: centralize all layouts in one file
2017-09-14 19:52:31 +08:00
1b61442bc3
rtio/sed: fix lane spreading and enable by default
2017-09-13 22:48:10 +08:00
8cfe2ec53a
rtio/sed: fix sequence number width computation
2017-09-13 22:11:41 +08:00
a92a955d1e
rtio/sed: use __all__
2017-09-13 18:17:22 +08:00
feec6298a5
rtio/sed: add lane distributor simulation unittest
2017-09-13 18:00:16 +08:00
c74abccfd5
rtio/sed: lane distributor fixes
2017-09-13 17:50:06 +08:00
bdd96084c5
rtio/sed: add lane distributor (untested)
2017-09-13 00:07:26 +08:00
faf54127ac
rtio/sed: remove VCD fine in unittest
2017-09-11 23:07:09 +08:00
a2b7894134
rtio/sed: add output driver simulation unittest
2017-09-11 23:05:10 +08:00
00ff3f5b0d
rtio/sed: fix output driver busy output
2017-09-11 23:04:52 +08:00
64d9381c36
rtio/sed: remove uneeded yield in test_sed_output_network
2017-09-11 23:02:56 +08:00
666bc600a2
rtio/sed: add output driver (untested)
2017-09-11 11:10:28 +08:00
1d2ebbe60f
rtio/sed: make ON payload layout configurable, add latency function
2017-09-11 09:06:40 +08:00
527b403bb1
rtio/sed: add output network simulation unittest
2017-09-10 23:41:20 +08:00
c5d6a2ba1a
rtio/sed: more output network fixes
2017-09-10 23:41:04 +08:00
96505a1cd9
rtio/sed: output network fixes
2017-09-10 23:23:10 +08:00
5646e19dc3
rtio/sed: add output network (untested)
2017-09-10 14:38:43 +08:00
Florent Kermarrec
2091c7696a
artiq/gateware/targets/sayma_amc_standalone: fix serwb_pll vco_div and serwb_phy mode
2017-09-06 09:18:12 +02:00
9edff2c520
remote_csr: interpret length as CSR size, not number of bus words
2017-08-31 13:34:48 +08:00
0a5904bbaa
firmware: support for multiple JESD DACs
2017-08-31 13:05:48 +08:00
a4144a07c4
sayma_amc: add converter SPI config defines
2017-08-31 13:04:38 +08:00
bacf8a1614
style
2017-08-31 12:52:09 +08:00
ad0a940e2d
sayma_rtm: hook up DAC SPI
2017-08-31 11:48:54 +08:00
f765dc50de
sayma_rtm: do not keep DACs in reset
2017-08-31 11:44:33 +08:00
a67659338d
sayma: clean up serwb comments
2017-08-31 11:42:01 +08:00
Florent Kermarrec
660f9856ec
gateware/serwb: add test for phy initialization
2017-08-30 17:59:10 +02:00
Florent Kermarrec
9650233007
gateware/serwb: change serdes clock domain to serwb_serdes
2017-08-30 15:44:44 +02:00
Florent Kermarrec
32ca51faee
gateware/targets/sayma_amc_standalone/rtm: use new serwb modules
2017-08-30 15:25:20 +02:00
Florent Kermarrec
41d57d64f6
gateware/serwb: SERWBPLL, SERWBPHY, SERWBCore and add checks in delay finding to verify the sampling window
2017-08-30 14:40:11 +02:00
Florent Kermarrec
9ba50098a8
gateware/test/serwb: use unittest for in test_etherbone
2017-08-29 17:31:01 +02:00
Florent Kermarrec
7d7f6be7ce
gateware/serwb: generate wishbone error if link loose ready in the middle of a transaction
2017-08-29 16:41:29 +02:00
Florent Kermarrec
60ad36e7d6
gateware/serwb: generate wishbone error on wishbone slave when access while link is not ready
2017-08-29 13:43:26 +02:00
Florent Kermarrec
89558e2653
gateware/serwb: for the initial version set delay in the center of the valid sampling window and don't use phase detectors
...
we'll use phase detectors later when it will be working reliably for both artix7 and kintex ultrascale
2017-08-29 13:38:52 +02:00
26a11a296c
sayma_rtm: drive DAC control signals
2017-08-26 16:57:02 -07:00
d609c67cbd
sayma_rtm: set clock mux pins
2017-08-26 16:48:10 -07:00
9194402ea5
sayma_rtm: expose HMC SPI bus
2017-08-26 16:31:31 -07:00
dbc12540da
sayma_amc: register RTM CSR regions from CSV
2017-08-26 14:48:11 -07:00
54c75d3274
sayma_rtm: use CSR infrastructure, generate CSR CSV
2017-08-23 17:19:53 -04:00
668450db26
sayma_amc: add serwb
2017-08-21 18:11:29 -04:00
0459a70cf6
sayma_amc: cleanup, fix RTM UART forwarding
2017-08-21 16:49:42 -04:00
1f2b373d09
sayma_rtm: remove unnecessary serwb_control
2017-08-21 16:37:13 -04:00
bfea297279
targets: add Sayma RTM
2017-08-21 15:58:01 -04:00
53c7f92fdc
serwb: add __init__.py and expose submodules
2017-08-21 15:57:43 -04:00
dac3a78b75
serwb: style, use migen, fix imports
2017-08-21 12:35:59 -04:00
Florent Kermarrec
da90a0fa12
Add test for Etherbone
...
Files copied directly from https://github.com/enjoy-digital/sayma_test @ 9ec62242659910ad1726beb00ff15b3f0a406615
2017-08-21 12:31:49 -04:00
Florent Kermarrec
44dc76e42e
Add serial Wishbone bridge
...
Files copied directly from https://github.com/enjoy-digital/sayma_test @ 9ce2cba87896d056819dc2edc54f0453a86162c3
2017-08-21 12:22:05 -04:00
d6b624dfbe
sayma_amc: connect RTM serial and second serial
2017-08-20 19:01:55 -04:00
bee4902323
add Sayma AMC standalone target
2017-08-20 11:47:45 -04:00
1dab7df846
kc705_sma_spi: fix permissions
2017-08-20 10:54:24 -04:00
df4f38a1e4
kc705: add pullup on SD card MISO
2017-07-24 22:26:16 +08:00
a201a9abd9
drtio: multilink transceiver interface
2017-07-18 13:27:33 +08:00
9045b4cc19
drtio: initial firmware support for multi-link
2017-07-18 00:40:21 +08:00
4deb5f6a45
gateware: use new MiSoC Wishbone address system
2017-07-13 19:16:49 +08:00
mntng
40ca951750
kc705: add SPI bus for memory card
...
This will be useful for SPI unit tests using a SD card as victim.
2017-07-12 00:27:44 +08:00
7b130a2c32
sawg: confirm smooth(order=3)
2017-07-07 11:36:03 +02:00
2f1029c292
Revert "sawg: advance dds 1/2 by one sample group"
...
This reverts commit 8e0a1cbdc8#772
The underlying issue is still the same. You will always find something that does not match when trying to compare the DDS with the parallelized DUC. They are just different. I could correct it for phase but then it will fail for amplitude. Or you'll compare the offset channel to phase1 or amplitude1. Let's state that equal things are well synchronized but unequal things may have a deterministic latency difference of strictly less than one coarse RTIO cycle.
2017-07-04 17:55:19 +02:00
8e0a1cbdc8
sawg: advance dds 1/2 by one sample group
...
closes #772
2017-07-04 16:51:58 +02:00
91ca9fbcad
sawg: also give offset some headroom
...
closes #771
2017-07-04 16:50:06 +02:00
78d1f0fdf6
sawg: fix PhasedAccu resets
2017-07-04 11:56:21 +02:00
Florent Kermarrec
2910b1be5e
artiq/gateware/rtio/dma: replace leave_out with omit in Record.connect
2017-07-04 10:48:06 +02:00
838127d914
rtio: break DMA timing path
2017-07-02 10:24:01 +08:00
911ee4a959
rtio: make pipelined logic reset_less
...
* latency-corrected counters
* registered error logic
2017-06-29 12:55:32 +02:00
600a48ac61
dsp.fir: cleanup
2017-06-29 12:18:48 +02:00
dca662a743
dsp.fir: pipeline final systolic adder
2017-06-29 11:33:19 +02:00
32a33500c8
dsp.fir: actively cull zero delays
2017-06-29 11:24:56 +02:00
f520d4a768
rtio: undo _RelaxedAsyncResetSynchronizer
2017-06-28 22:08:15 +02:00
3cbbcdfe96
sawg: don't enable_replace for Config
...
closes #762
2017-06-28 20:31:40 +02:00
f2632e0fd1
sawg: adapt latency to fir changes
...
closes #748
2017-06-28 20:12:30 +02:00
e7db2c6578
dsp.accu: reset_less outputs
2017-06-28 20:04:58 +02:00
6bb994228f
dsp.fir: drop x shift
2017-06-28 19:55:15 +02:00
01847271c5
rtio: use reset_less signal for reset fanout
2017-06-28 19:43:55 +02:00
b9859cc0c3
dsp.fir: remove old/wrong comment
2017-06-28 19:21:57 +02:00
55b5b87490
fir: simplify latency compensation
...
Don't try to tweak out the last bit of latency by feeding the HBF input
early. Instead feed it late so the interpolated samples are early and
the latency is an even multiple of the super-sample cycle.
2017-06-28 19:13:43 +02:00
d1e5dd334f
sawg: use pipeline reset
2017-06-28 19:09:39 +02:00
6418205906
dsp.fir: use pipelin-reset
2017-06-28 19:09:21 +02:00
07f5e99140
dsp/sat_add: works after previous changes
2017-06-22 18:24:22 +02:00
f78d5a87e9
dsp/test: skip and fix sat_add
2017-06-22 18:01:31 +02:00
47928a2c0d
sawg: disable limiter
...
temporary workaround to permit testing other aspects
2017-06-22 17:31:04 +02:00
cd2ac53bc5
dsp/sat_add: make width mandatory
2017-06-22 17:28:39 +02:00
9b940aa876
dsp/sat_add: spell out logic more
2017-06-22 16:55:13 +02:00
d0cf0f2b87
sawg/limiter: make signed signals explicitly
2017-06-22 13:44:36 +02:00
694f8d784c
dsp/tools: unittest sat_add
2017-06-22 11:29:56 +02:00
bd1438d28e
sawg: wrap limits init values
2017-06-22 10:26:29 +02:00
cccd01e81e
sawg: cleanup sat_add logic
2017-06-22 10:26:29 +02:00
5f6e665158
test/sawg: patch delay_mu
2017-06-22 10:26:29 +02:00
570f2cc1ff
dsp/tools/SatAdd: fix reuse of clipped signal
2017-06-22 10:26:29 +02:00
4b3aad2563
sawg: clean up Config
...
* unify I and Q data limiters. there is no conceivable way why they
would be different.
* reorder clr bits to be like consistent
* move the sat add limiter to before the hbf again
2017-06-22 10:26:29 +02:00
f4c6879c76
sawg: special case Config RTIO address
2017-06-22 10:26:29 +02:00
ff0da2c9fc
sawg: stage code for y-data exchange on channels
2017-06-22 10:26:29 +02:00
