6d20b71dde
ttl_serdes_7series: refactor IOSERDES
2018-01-02 13:20:47 +01:00
whitequark
b7f38b123b
frimware: update to log 0.4.
2018-01-01 11:45:55 +00:00
745e695b09
sayma: output a ramp in the absence of SAWG channels
2017-12-31 12:18:53 +01:00
whitequark
a371b25525
bootloader: allow using without Ethernet.
2017-12-31 09:21:28 +00:00
whitequark
70ebe431fd
satman: fix build after b8f3d28b.
2017-12-31 09:21:02 +00:00
whitequark
e1253db0e8
firmware: update crc dependency, use it in libdrtioaux.
2017-12-31 09:16:11 +00:00
whitequark
b8f3d28bc0
firmware: update compiler_builtins dependency and move it to libboard.
...
This is so that we only specify it once.
2017-12-31 09:16:11 +00:00
a1b8bca1e6
Revert "artiq_flash: ignore RTM FPGA"
...
Naive optimism.
This reverts commit 100bda2582
2017-12-31 13:29:36 +08:00
100bda2582
artiq_flash: ignore RTM FPGA
...
It has no flash connected, and attempting to detect it causes unnecessary program failure when the RTM is not present.
2017-12-31 12:10:16 +08:00
38ce1f1d5d
artiq_flash: support flashing satman
...
A bit ugly and ad-hoc but I cannot think of an easy and better option right now.
2017-12-31 12:09:18 +08:00
a897d82324
ad9154: retry initialization ( #727 )
2017-12-31 11:27:43 +08:00
6e0288e568
drtio: fix GTH CPLL reset
2017-12-30 12:14:36 +08:00
379d29561b
sayma: plausibility assertion on sawg data stream
2017-12-29 19:15:40 +01:00
37f9c0b10c
spi: register clk
...
following m-labs/misoc#65
1dc68b0d0b
2017-12-28 16:50:22 +01:00
whitequark
3505878176
bootloader: add basic network support.
2017-12-28 15:26:12 +00:00
whitequark
d2687ce3c4
firmware: fix a typo replacing spiflash::SECTOR_SIZE with PAGE_SIZE.
2017-12-28 15:26:12 +00:00
whitequark
33e0393e4a
firmware: move mod ethmac to libboard.
2017-12-28 14:40:15 +00:00
whitequark
55cfdec644
firmware: enlarge bootloader partition to 4 sectors.
2017-12-28 14:39:26 +00:00
whitequark
acd13837ff
firmware: implement the new bootloader.
2017-12-28 13:18:51 +00:00
whitequark
b9754e7108
firmware: deduplicate libbuild_misoc and libbuild_artiq.
2017-12-28 13:18:51 +00:00
8153cfa88f
drtio/gth: add probes on {tx,rx}_init.done
2017-12-28 16:49:08 +08:00
c086149782
drtio/gth: use async microscope probes
2017-12-28 16:37:40 +08:00
whitequark
d94db1de5d
Revert accidentally committed parts of 1b9b5602.
2017-12-28 08:23:34 +00:00
whitequark
fcc438524c
firmware: use main.rs as the root source for non-library crates. NFC.
2017-12-28 08:20:23 +00:00
whitequark
1b9b560242
firmware: use libbuild_misoc in libdrtioaux. NFC.
2017-12-28 08:20:23 +00:00
whitequark
8f33061a6d
firmware: fix sayma_amc_standalone build with sawg.
2017-12-28 08:20:23 +00:00
4ea801b2ea
firmware: si5324 moved to board_artiq
2017-12-28 15:45:45 +08:00
whitequark
3b18ece3b7
satman: update for changes in firmware elsewhere.
2017-12-28 07:36:33 +00:00
whitequark
d3066e5044
firmware: oops, misoc #[cfg]s were missing from libboard_artiq.
2017-12-28 07:36:33 +00:00
whitequark
ca419aa3c2
firmware: split out libboard_artiq from libboard.
2017-12-28 07:07:00 +00:00
6801921fc0
drtio: instrument GTH transceiver
2017-12-28 15:03:14 +08:00
whitequark
b443fbd8f7
runtime: remove #[repr(simd)] hack.
2017-12-28 04:46:27 +00:00
whitequark
7687a34285
firmware: remove dependency on compiler-rt.
2017-12-28 04:08:29 +00:00
whitequark
4dfe71676e
firmware: remove dependency on libbase.
2017-12-28 04:03:27 +00:00
whitequark
68f128944a
firmware: clean up makefiles.
2017-12-27 23:10:47 +00:00
whitequark
d7cb4963e1
firmware: prepare config block for access from BIOS/bootloader.
...
* remove liballoc dependency from mod config,
* move mod config to libboard,
* move config sector immediately after BIOS sector.
2017-12-27 21:28:40 +00:00
whitequark
5a2cbe7088
runtime: remove borrow_mut!() in favor of backtraces.
2017-12-27 19:15:25 +00:00
whitequark
4d915ad15b
compiler: do not permit str(...). ( #878 )
2017-12-27 03:10:50 +00:00
whitequark
355acb5e13
compiler: fix typo in a0a2650f.
2017-12-26 21:55:22 +00:00
whitequark
edfacbd063
conda: ship runtime.elf in board-specific packages.
...
This is so that backtraces may be symbolized.
2017-12-26 21:50:31 +00:00
whitequark
9aec64093b
compiler: do not ever emit !tbaa on invoke instructions.
2017-12-26 21:35:08 +00:00
whitequark
a2bc12da68
Only print gateware/software mismatch warning once per process.
2017-12-26 21:13:46 +00:00
whitequark
b31b59f7ca
compiler: update for llvmlite 0.20.0.
2017-12-26 16:25:19 +00:00
whitequark
a0a2650fca
compiler: do not use invoke for calls to nounwind ffi functions.
...
Otherwise, declarations such as:
@syscall(flags={"nounwind", "nowrite"})
def foo(...):
trip an LLVM assert because the invoke instruction and the !tbaa
metadata are no longer compatible since LLVM 4.0.
2017-12-26 16:24:57 +00:00
whitequark
fd6d97f052
artiq_devtool: set ServerAliveInterval.
2017-12-26 15:41:03 +00:00
whitequark
8b4a006855
runtime: update smoltcp.
2017-12-26 14:33:56 +00:00
whitequark
c939c6183e
Update to LLVM 4.0.
2017-12-26 14:09:17 +00:00
whitequark
71eca5ad61
runtime: fix some final flash storage issues.
2017-12-26 14:09:17 +00:00
whitequark
188764693e
runtime: we're growing, put storage at 1M instead of 512K.
2017-12-26 03:34:16 +00:00
whitequark
e2513a2401
runtime: ensure flash storage never overlaps with runtime sections.
2017-12-26 03:31:37 +00:00
whitequark
6e341da3a1
runtime: simplify. NFC.
2017-12-26 02:31:28 +00:00
whitequark
061fb3dcd5
runtime: remove accidentally committed parts of a Makefile.
2017-12-25 20:30:13 +00:00
whitequark
230f2e5e18
runtime: print (address-only) backtraces on core device panics.
2017-12-25 18:32:41 +00:00
whitequark
3eec15c01d
firmware: fix compatibility with newer rustc. NFC.
2017-12-25 17:16:05 +00:00
whitequark
1570a482c2
artiq_devtool: don't require lock for reset.
...
reset is mainly useful as a part of reset+hotswap sequence, and that
already needs lock via connect.
2017-12-25 16:15:51 +00:00
70b7f28ad3
drtio: drive SFP TX disable pins
2017-12-23 22:58:51 +08:00
00ed51f6f4
satman: use new alloc_list ( #880 )
2017-12-23 22:15:39 +08:00
f8c8f3fe26
drtio: fix GTH clock domains
2017-12-23 07:21:44 +08:00
1af21c0b29
drtio: integrate GTH transceiver for Sayma
2017-12-23 01:19:59 +08:00
c57b66497c
drtio: refactor/simplify GTH, use migen
2017-12-23 01:19:44 +08:00
77897228ca
drtio: add GTH transceiver code from Florent (197c79d47)
2017-12-22 18:01:28 +08:00
ebdbaaad32
drtio: remove KC705/GTX support
2017-12-22 17:51:42 +08:00
0681d472c7
conda: fix sayma_rtm_csr.csv location for Sayma AMC
2017-12-22 17:14:10 +08:00
cbd69287a7
artiq_flash: select Sayma standalone variant by default
2017-12-22 16:54:06 +08:00
44959144d8
conda: add Sayma AMC standalone board package
2017-12-22 16:44:04 +08:00
Florent Kermarrec
86825a852c
gateware/targets/sayma_rtm: add false path between cd_sys and cd_clk200
2017-12-21 23:52:44 +01:00
69d7e93e99
drtio: adapt examples to Sayma
2017-12-21 23:09:19 +08:00
a6ffe9f38d
drtio: add Sayma top-level designs
2017-12-21 23:08:56 +08:00
4fbc8772a5
sayma: allocate all user LEDs to RTIO, make one TTL SMA input
2017-12-21 19:27:38 +08:00
a23251276d
Revert "sayma: set up Si5324 for RGMII clock rerouting"
...
This reverts commit 2b01aa22b6
2017-12-21 14:42:15 +08:00
whitequark
701308474f
runtime: update smoltcp.
2017-12-19 15:51:03 +00:00
whitequark
aaba36be7a
runtime: log moninj messages at TRACE level, like all others.
2017-12-16 22:39:13 +00:00
whitequark
8cece4f260
runtime: hotswap slightly more carefully.
...
This generally lets some last characters out of UART, last ACKs
out of queues, etc. Nothing guaranteed though.
2017-12-16 22:39:13 +00:00
whitequark
4a9d8c9459
runtime: fix a warning.
2017-12-16 22:39:13 +00:00
2b01aa22b6
sayma: set up Si5324 for RGMII clock rerouting
2017-12-17 00:25:33 +08:00
David Nadlinger
c3c13da1a6
dashboard: Restore minimized experiments when trying to open them again
...
When the user tried to open an experiment from the explorer that
already existed, previously "nothing would happen" (focus change
without the window being restored).
2017-12-15 19:11:09 +00:00
b6199bb35b
sayma: style
2017-12-15 19:45:51 +08:00
649b60ea29
targets/kc705_drtio: remove DAC FMC card support
2017-12-15 17:32:25 +08:00
f02c74cb7b
libboard/si5324: enable both clock outputs
2017-12-15 16:56:44 +08:00
9caef3c1d3
libboard/si5324: configure I2C mux on Sayma
2017-12-15 16:45:26 +08:00
341e809859
targets/sayma_rtm: enable Allaki RF switches, GPIO access to attenuator
2017-12-15 13:08:35 +08:00
77977932f2
firmware: remove AD9516 support
...
This was only used in KC705 phaser.
2017-12-14 19:16:39 +08:00
2e74ce25d8
examples/sayma: make LED blink pattern more peculiar
2017-12-14 19:10:34 +08:00
100c2b1769
add Sayma LED blinker example
2017-12-14 18:49:50 +08:00
569484f888
remove phaser, adapt SAWG example to Sayma
2017-12-14 18:49:27 +08:00
5809e08686
runtime: no startup_clock config is not an error
2017-12-14 12:39:26 +08:00
71db953ea0
artiq_flash: add srcbuild option to look into MiSoC source build trees. Closes #868
2017-12-14 10:36:32 +08:00
5e251cd85c
sayma_amc: remove redundant bitstream options
...
* CONFIGRATE default is sufficient
* SPI width can be auto and QSPI works
2017-12-13 14:39:32 +01:00
a9d0f253a5
sayma_amc: set bitstream and config parameters
...
* slow down CCLK rate as there is additional loading
on the signals
* single bit SPI for now until we know that quad SPI
works
* set up
https://github.com/m-labs/artiq/issues/847
2017-12-13 21:21:52 +08:00
2917208d89
artiq_flash: fix sayma flashing
...
* do not include jtagspi as it already instantiates a flash bank
instead define the target manually
* erase before writing
* verify written images
2017-12-13 21:20:16 +08:00
whitequark
3cf5cef168
artiq_pcap: still grab the file if the command fails.
2017-12-08 07:36:56 +00:00
whitequark
9e8bb1d51c
runtime: update smoltcp.
2017-12-08 07:36:56 +00:00
a44f8282dc
test_performance: relax network speed to 2 MB/s
...
At QUARTIQ I am getting 2.4/2.3 MB/s and with single switch at M-Labs we
apparently regularly met 2.2/2.2 MB/s. But with the current multiple
switches and one of them being a problematic switch that triggered #837
it looks like it is a tad slower.
http://buildbot.m-labs.hk/builders/artiq/builds/1818/steps/python_coverage_1/logs/stdio
2017-12-06 17:21:41 +01:00
whitequark
1c25f7ef52
gateware: make software builds spew less junk on the console.
...
[ci skip]
2017-12-04 14:19:35 +00:00
whitequark
277b00eb9d
artiq_devtool: --config is no longer supported by artiq_flash.
...
[ci skip]
2017-12-04 14:19:31 +00:00
66e089b376
libboard/serwb: more explicit retry log message
2017-12-02 10:51:13 +08:00
Florent Kermarrec
0eb9f93611
libboard/serwb: retry serwb initialization on error
2017-12-01 22:45:05 +01:00
2e5b20d53d
libboard/hmc830_7043: enable HMC830
2017-11-30 12:06:54 +08:00
ad2a32d381
libboard/ad9154: small cleanup
2017-11-30 11:33:58 +08:00
Florent Kermarrec
bd75954192
libboard/ad9154: update for sayma (spi, jesd parameters, linerate), breaks kc705/ad9154 fmc support
2017-11-29 18:09:39 +01:00
Florent Kermarrec
8b8da39a8f
libboard/hmc830_7043.rs: fix HMC7043 comments
2017-11-29 17:59:42 +01:00
19498e59f9
libboard: fix JESD reset release
2017-11-29 18:18:41 +08:00
bb3d6ef84a
sayma: remove ad9154 from mem_map
...
Address is autogenerated by CSR system.
2017-11-29 18:17:25 +08:00
1426ecad64
dashboard: tidy dashboard naming logic
2017-11-28 08:56:04 +08:00
fbd4d8eb6f
dashboard: log server address even if friendly name given
2017-11-28 08:56:04 +08:00
b6ad510007
master: style (NFC)
2017-11-28 08:56:04 +08:00
00efb0ccd2
master: expand --name help
2017-11-28 08:56:04 +08:00
10ee3f19a8
dashboard: close config RPC Client cleanly at exit
2017-11-28 08:56:04 +08:00
0999f2dd86
dashboard: explain default configuration file path
2017-11-28 08:56:04 +08:00
84b5e68349
dashboard: use master's friendly name in dashboard title
2017-11-28 08:56:04 +08:00
fafabacf97
master: add friendly name
2017-11-28 08:56:04 +08:00
2852e793ab
dashboard: store separate configuration data for each master, keyed by server and port
2017-11-28 08:56:04 +08:00
cfb41e71a8
libboard: print serwb settings at the debug log level
2017-11-28 01:23:33 +08:00
whitequark
8e8f037971
runtime: print ethmac preamble error count.
...
Also, print total error count, not the difference (but still compute
the difference to determine *when* to print).
2017-11-26 22:35:26 +00:00
whitequark
e5995794be
artiq_devtool: actually hold the lock until script termination.
...
The open channel that ran flock was garbage collected, which caused
the flock command to terminate.
2017-11-26 20:54:24 +00:00
whitequark
b5d098c6db
Add lockfile support to artiq_devtool.
2017-11-26 15:17:35 +00:00
7f15f50878
coredevice/ad9912: add [untested, wip]
2017-11-24 18:47:46 +01:00
280392708d
sawg: fix typo
2017-11-22 20:06:02 +08:00
29181b1586
artiq_influxdb: use aiohttp.ClientSession. Closes #829
2017-11-22 17:31:09 +08:00
whitequark
26fdd42f8f
runtime: update smoltcp.
2017-11-22 08:09:06 +00:00
ecfe2e40ee
sayma_amc_standalone: rtio channels for both sawg groups
2017-11-19 18:32:42 +01:00
d1a7c1c3a1
sayma_amc_standalone: connect sawg to jesd again
2017-11-19 14:36:20 +01:00
Florent Kermarrec
dfdd2dd9e6
gateware/targets/sayma_amc_standalone: revert self.add_wb_slave on serwb
2017-11-19 09:01:20 +01:00
Florent Kermarrec
cd83b71d92
gateware/targets/sayma_amc_standalone: serwb working, need fixing on AD9154 data mapping
2017-11-18 18:10:28 +01:00
Florent Kermarrec
a3383c340c
firmware/satman/lib.rs: has_serwb_phy to has_serwb_phy_amc
2017-11-18 18:09:35 +01:00
Florent Kermarrec
39a8fc682d
artiq/firmware/libboard/hmc830_7043.rs: some cleanup, don't use hmc830 for now
2017-11-18 18:08:31 +01:00
Florent Kermarrec
f003566e52
serwb: fix rx_delay_inc on ultrascale, this was the issue serwb issue...
...
rx_delay_inc and rx_delay_ce were set for only one cycle, on ultrascale, these signals are translated to serwb_serdes_5x clock domain and we now set rx_delay_inc always to 1 (MultiReg), rx_delay_ce for one cycle (PulseSynchronizer)
2017-11-18 18:01:46 +01:00
Florent Kermarrec
1b976bfa4d
gateware/serwb/kusphy: use AsyncResetSynchronizer on cd_serwb_serdes_5x
2017-11-18 17:57:11 +01:00
Florent Kermarrec
aff1609a53
firmware/libboard: use correct jesd clocking
2017-11-10 10:56:45 +01:00
Florent Kermarrec
d90d624877
firmware/libboard/serwb: revert init reset, show delay
2017-11-10 10:53:20 +01:00
Florent Kermarrec
464b24a608
gateware/targets/sayma_amc: integrate ad9154 correctly (add crg, use cpll instead of qpll, use correct clocking) and cleanup serwb constraints.
2017-11-10 10:48:32 +01:00
Florent Kermarrec
278c739d30
gateware/targets/sayma_rtm: add dynamic clock mux, cleanup serwb clock constraints
2017-11-10 10:39:47 +01:00
Florent Kermarrec
48bfaec8d3
gateware/serwb/phy: remove unnecessary rx_dly_rst (use wrap-around), fix typo & pep8
2017-11-10 10:37:08 +01:00
Florent Kermarrec
59be095512
gateware/serwb/kusphy: use locally inverted clk_b on iserdese3
2017-11-10 10:35:48 +01:00
Florent Kermarrec
db82b11f29
gateware/serwb/core: cleanup and increase fifo depth
2017-11-10 10:33:39 +01:00
5dc131636d
artiq_flash: adapt to bit2bin
2017-11-09 18:10:15 +01:00
4880e4225d
bit2bin: cleanup
2017-11-09 13:00:04 +01:00
Florent Kermarrec
76ddb063cf
gateware/targets/sayma: get hmc830/7043 spi working (still need to test clock generation)
2017-11-06 12:08:28 +01:00
whitequark
fcd660d682
runtime: remove accidentally deleted code.
2017-11-03 16:10:59 +00:00
whitequark
dfb2fe0b80
runtime: allow #[cfg(not(has_ethmac))] builds.
2017-11-03 16:09:22 +00:00
whitequark
4835431ac3
runtime: allow #[cfg(not(has_kernel_cpu))] builds.
2017-11-03 16:04:17 +00:00
whitequark
ad8fcb8b86
runtime: has_rtio -> has_rtio_core.
...
has_rtio is the cfg for the kernel CPU, has_rtio_core is the one
for the comms CPU.
Also remove a few useless #[cfg]s.
2017-11-03 15:59:59 +00:00
whitequark
2404a0d8c8
runtime: allow #[cfg(not(has_rtio))] builds.
2017-11-03 15:49:30 +00:00
Florent Kermarrec
b3e920b3c8
firmware/libboard/serwb: fix init
2017-11-03 12:16:16 +01:00
Florent Kermarrec
5bd1e43ced
gateware/serwb: cleanup imports, use buffered SyncFIFO in EtherboneRecordSender
2017-11-03 12:15:14 +01:00
0d8bad5128
runtime: fix rtio::log
2017-11-03 09:25:37 +08:00
4387b0be1e
clean up rtio_log
2017-11-03 00:52:53 +08:00
62320432a5
artiq_flash: fix sayma amc tap/pld index
2017-11-01 14:45:07 +01:00
bfd36e7340
artiq_flash: update for Sayma OpenOCD changes
2017-11-01 20:11:18 +08:00
4a57b52241
artiq_flash: add preinit-command option
2017-11-01 17:34:10 +08:00
