66e33a66d6
test: enable TTL loopback tests on Kasli
2018-08-17 13:35:55 +08:00
bc3e715a8f
examples: fix kasli_tester
2018-08-11 10:51:42 +08:00
957645a7e7
examples: move kasli tester out of kasli_basic
2018-08-09 18:07:44 +08:00
bbc98410e4
test: dds → ad9914dds
...
Prevent confusion with Urukul.
2018-08-09 16:55:09 +08:00
a061ba2505
grabber/kasli_basic: add grabber test
...
close #1121
2018-08-08 12:43:44 +02:00
8b8e1844f0
kasli_sawgmaster: roughly match Urukul and Sayma amplitudes
2018-08-07 20:07:21 +08:00
9ce6233926
kasli: fix SYSU TTL directions
2018-08-07 19:29:28 +08:00
8aa88cfe70
kasli_sawgmaster: add Urukul-Sayma example
2018-08-07 19:29:28 +08:00
65f198bdee
kasli: use tester EEMs for DRTIO, add Urukul-Sayma sync example
2018-08-06 16:53:13 +08:00
d152506ecb
sayma: update fmcdio_vhdci_eem demo
2018-07-19 15:47:20 +08:00
31f4f8792a
sayma: add Urukul and Zotino to example device_db
2018-07-18 10:31:55 +08:00
5e62910a8d
examples: add Sayma VHDCI DIO
2018-07-17 23:28:05 +08:00
82145b1263
examples: sayma_drtio → sayma_masterdac
2018-07-17 20:32:30 +08:00
3168b193e6
kc705: remove Zotino and Urukul
...
* use Kasli instead for using EEMs
* code required outdated VHDCI adapter 1.0
2018-07-17 17:48:57 +08:00
4420046502
kasli_tester: support mixed AD9910/AD9912 systems
2018-07-06 15:43:38 +08:00
ac3f360c26
kasli_tester: fix AD9912 support
2018-07-06 15:43:25 +08:00
509562ddbf
kasli: add WIPM target
2018-07-06 15:41:28 +08:00
0483b8d14c
sayma_drtio: ditto
2018-06-28 17:03:32 +08:00
04d6ff45c8
kasli_sawgmaster: reset SAWGs
...
Most importantly this resets the phase accumulators.
2018-06-28 17:01:48 +08:00
51a5d8dff9
examples: add Kasli SAWG master
2018-06-22 18:57:49 +08:00
83428961ad
sayma: add SAWG and JESD to DRTIO master
2018-06-22 00:04:22 +08:00
5a91f820fd
examples: change Sayma sines frequency to 9MHz
...
Well within Red Pitaya bandwidth.
2018-06-20 22:40:07 +08:00
9288301543
examples: add DRTIO sines
2018-06-20 22:39:40 +08:00
4803ca3799
examples/sayma_drtio: add SAWG channels
2018-06-19 23:50:26 +08:00
cae92f9b44
kasli: add Tsinghua variant
2018-06-06 19:03:45 +08:00
62deffa7d2
opticlock: fix core device name
2018-06-01 15:39:23 +00:00
f50aef1a22
suservo: extract boilerplate
...
closes #1041
2018-06-01 15:37:07 +00:00
2c344686d9
ad53xx/zotino: enable overtemp shutdown and readback control
2018-06-01 13:06:52 +00:00
87d3ac9d25
suservo: swap transfer function parametrization
...
The integrator is now parametrized through its gain and not the PI
corner frequency. The integrator gain limit is given in absolute gain
units and not relative to the proportional gain.
close #1033
2018-06-01 09:38:18 +00:00
8fd57e6ccb
kasli_tester: add Sampler and Zotino support
2018-05-29 22:36:42 +08:00
ad099edf63
kasli: integrate grabber
2018-05-28 22:43:40 +08:00
c2890c6cf0
kasli_tester: initialize DDS channels
2018-05-28 14:24:39 +08:00
4d3f763865
move kasli_opticlock to kasli_basic
2018-05-28 11:02:44 +08:00
b09d07905c
kasli: add LUH/PTB/HUB variants
...
and refactor/simplify variant selection
2018-05-27 18:33:27 +00:00
fcd12e3472
suservo: work around #1007
2018-05-22 17:36:41 +00:00
4e5fe672e7
kasli: add tester target
2018-05-21 17:43:39 +08:00
2e6b81d59a
kasli_tester: reset core device
2018-05-21 15:35:29 +08:00
8513f0b0d4
minor cleanup
2018-05-21 15:35:00 +08:00
f953bee79e
kasli_test: add RF switch control
2018-05-18 23:48:29 +08:00
f457b59985
kasli_tester: bail out when run from ARTIQ master
2018-05-18 23:30:52 +08:00
3cbcb3bff6
move mitll, sysu and ustc device_dbs to kasli_basic
2018-05-18 23:20:40 +08:00
bdfd993818
kasli_tester: add Urukul support
2018-05-18 23:18:03 +08:00
9a4408a570
add Kasli TTL tester
2018-05-18 22:52:53 +08:00
37bd0c2566
kasli: add USTC target
2018-05-18 16:15:07 +08:00
73f8e61478
kasli_sysu: fix TTL directions in example device_db
2018-05-18 16:13:50 +08:00
a100c73dfe
suservo: support pure-I
2018-05-14 18:48:27 +00:00
0c1caf0744
suservo: clean up and beautify example
2018-05-14 15:22:47 +02:00
504d37b66b
suservo: add SI units functions and document
...
m-labs/artiq#788
2018-05-14 12:26:49 +00:00
3027951dd8
integrate new AD9914 driver
...
moninj, analyzer, docs, examples, tests.
2018-05-13 23:29:35 +08:00
f055bf88f6
suservo: add clip flags ( #992 )
2018-05-09 07:16:15 +00:00
8812824fb2
suservo: speed up example, interlock mem
2018-04-27 17:17:17 +00:00
5f00326c65
suservo: coeff mem write port READ_FIRST
2018-04-27 15:43:32 +00:00
73fa572275
suservo: documentation, small API changes
2018-04-27 16:53:22 +02:00
fe9834bac4
suservo: update 'technology preview' example [wip]
...
Still with mostly undocumented and unstable API.
2018-04-27 12:04:17 +00:00
307cd07b9d
suservo: lots of gateware/ runtime changes
...
tested/validated:
* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback
individual changes below:
suservo: correct rtio readback
suservo: example, device_db [wip]
suservo: change rtio channel layout
suservo: mem ports in rio domain
suservo: sck clocked from rio_phy
suservo: cleanup, straighten out timing
suservo: dds cs polarity
suservo: simplify pipeline
suservo: drop unused eem names
suservo: decouple adc SR from IIR
suservo: expand coredevice layer
suservo: start the correct stage
suservo: actually load ctrl
suservo: refactor/tweak adc timing
suservo: implement cpld and dds init
2018-04-27 13:50:26 +02:00
8a1151b54f
suservo: example device db
2018-04-25 17:14:25 +00:00
4fe09fddd5
examples/kc705_nist_clock: update to new ad53xx driver
2018-04-22 15:03:30 +08:00
48b48e44dd
kasli/mitll: fix demo
2018-04-17 20:15:38 +08:00
79f4892e22
kasli/mitll: fix RTIO channel numbers
2018-04-17 20:15:17 +08:00
eac447278f
kasli: add MITLL variant
2018-04-17 19:00:11 +08:00
8d62ea2288
examples: fix KC705 ad53xx
2018-03-25 11:19:54 +08:00
a20dfd9c00
examples/master: ad5360 -> zotino
2018-03-24 16:46:59 +01:00
0505e9124f
kc705: port device_db, ad53xx/zotino example
2018-03-24 16:05:26 +01:00
68e433a3a8
opticlock/device_db: resurrect novogorny
...
deleted in a992a67
2018-03-24 13:46:45 +01:00
hartytp
a992a672d9
coredevice/zotino: add ( #969 )
...
* Replace ad5360 driver with a ad53xx driver, designed to have a nicer interface
Add Zotino driver and add to opticlock target for Kasli
Test Zotino on hw:
- Verify all timings on the hardware with a scope
- Verify that we can correctly set and read back all registers in a loop (checks for SI and driver issues)
- check we can set LEDs correctly
- check calibration routine + all si unit functions with a good DVM
- look at DAC transitions on a scope (while triggering of a TTL) on persist to check there are no LDAC glitches etc
To do: update examples and e.g. KC705 device db.
2018-03-24 13:41:18 +01:00
770b0a7b79
novogorny: conv -> cnv
...
* parity with sampler
* also add novogorny device to opticlock
2018-03-21 18:38:42 +00:00
12d699f2a8
suservo: add sampler example
2018-03-21 12:21:53 +00:00
f5a1001114
suservo: add device database and artiq_flash variant
2018-03-21 08:53:26 +00:00
37f5f0d38d
examples: add DMA to Sayma DRTIO
2018-03-09 00:49:24 +08:00
8bd85caafb
examples: fix Sayma DRTIO ref_period
2018-03-08 15:09:33 +08:00
5e074f83ac
examples: update kasli sysu
2018-03-02 16:05:12 +08:00
a9daaad77b
kasli: add SYSU variant and device_db
2018-03-02 14:44:31 +08:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
f97163cdee
examples/master: sync device_db with kc705_nist_clock
2018-02-27 19:40:00 +01:00
whitequark
916b10ca94
examples: spi → spi2.
2018-02-27 18:36:45 +00:00
760724c500
kasli/device_db: fix i2c switch addr
2018-02-26 11:37:12 +01:00
771bf87b56
kc705: port amc101_dac/spi0 and sma_spi to spi2
2018-02-22 17:19:51 +01:00
d4a10dcbd4
urukul: fix example
2018-02-22 11:28:50 +01:00
f8e6b4f4e3
ad5360: port to spi2
...
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db
This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1
m-labs/artiq#926
2018-02-22 10:25:46 +01:00
0d8145084d
test_spi: move to new spi2 core
2018-02-21 19:41:05 +01:00
a63fd306af
urukul: use spi2
...
* switch kc705 and kasli targets to spi2 gateware on urukul
* rewrite urukul, ad9912, ad9910
* update example experiments, device_dbs
2018-02-21 15:00:28 +00:00
01fa6c1c2e
reorganize examples
2018-02-19 15:46:08 +08:00
7002bea0ab
kasli: clean up urukul example more
2018-02-15 14:21:17 +01:00
b6395a809b
kasli: remove old urukul test code
2018-02-13 22:16:57 +01:00
be693bc8a9
opticlock: examples
2018-02-13 22:13:40 +01:00
e67a289e2b
examples: add SAWG sines (DAC synchronization test)
2018-02-13 20:02:51 +08:00
6f90a43df2
examples: reorganize for new hardware
2018-01-28 02:11:45 +08:00
cb0016ceee
examples/sayma: fix ref_multiplier
...
SAWG is working, whoohoo!
2018-01-23 15:26:03 +08:00
74b7baa8c5
urukul example: mmcx clock input
2018-01-22 20:30:08 +01:00
a86b28def2
urukul: example additions
...
* relax timings for faster spi xfers
* continuous readback test to explore spi speed limit
2018-01-22 20:29:30 +01:00
whitequark
bfceef439f
Add missing parts of f317d1a2.
2018-01-17 01:14:16 +00:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
67746cc7a0
urukul: raise instead of assert, clean up
2018-01-03 19:22:36 +00:00
e3d66d286d
urukul: ad9910 examples
2018-01-03 18:43:04 +00:00
d8dbab024d
urukul: don't deal with dds_reset for now
2018-01-03 18:43:04 +00:00
e8608d12f5
device_db.py: whitespace
2018-01-03 18:43:04 +00:00
a940550e47
urukul: add CPLD and AD9912 driver [wip]
2018-01-02 19:59:24 +01:00
94b84ebe7c
kc705_dds: add urukul spi/ttl channels
2018-01-02 13:20:48 +01:00
69d7e93e99
drtio: adapt examples to Sayma
2017-12-21 23:09:19 +08:00
4fbc8772a5
sayma: allocate all user LEDs to RTIO, make one TTL SMA input
2017-12-21 19:27:38 +08:00
2e74ce25d8
examples/sayma: make LED blink pattern more peculiar
2017-12-14 19:10:34 +08:00
100c2b1769
add Sayma LED blinker example
2017-12-14 18:49:50 +08:00
569484f888
remove phaser, adapt SAWG example to Sayma
2017-12-14 18:49:27 +08:00
8407b2c400
examples/ad5360: set FMC DIO directions
2017-10-31 23:15:03 +08:00
d80cf8d59d
kc705: add TTLs and shift register driver for FMC DIO
2017-10-31 23:14:39 +08:00
0695afec37
examples/dma_blink: use handle
2017-10-31 00:07:34 +08:00
00a2e51f99
examples/ad5360: adapt for Zotino
2017-10-26 11:58:15 +08:00
bb6e7618bb
examples/device_db: update DAC entry for Zotino, add sections
2017-10-26 02:26:19 +08:00
5803ac9998
gateware: add Zotino SPI to NIST CLOCK target
2017-10-23 15:04:30 +08:00
471605ec1e
pdq: move to https://github.com/m-labs/pdq
2017-07-19 17:35:28 +02:00
377c776ec8
examples/dma_blink: replay → playback
2017-07-18 14:01:08 +08:00
mntng
40ca951750
kc705: add SPI bus for memory card
...
This will be useful for SPI unit tests using a SD card as victim.
2017-07-12 00:27:44 +08:00
f369cb97f7
sawg/examples: add a bit more slack
2017-06-22 10:26:29 +02:00
c2cc29142d
drtio: remove misleading comment from device_db
2017-06-21 18:34:53 +08:00
64ce85445c
drtio: add remote converter SPI example ( #740 )
2017-06-21 17:08:12 +08:00
c74de6ae96
phaser: reintroduce test_ad9154_status
2017-06-20 00:49:57 +08:00
39ddb66f0f
phaser: add AD9154 SPI access driver to example ddb
2017-06-20 00:49:21 +08:00
b5772f478a
sawg: add channel reset ( closes #751 )
2017-06-16 19:31:57 +02:00
6c54c0f834
sawg: update example
2017-06-10 11:52:48 +02:00
f3c7a7de3b
phaser: remove non-functional SPI examples
...
Those will be reimplemented after we have converter SPI access, but this will not be part of the 3.0 release.
2017-06-06 17:37:13 +08:00
2458da1ade
pdq: get new host driver, adapt
2017-05-31 00:20:10 +02:00
06721c19c4
sawg: work around bool->int
2017-05-22 18:50:58 +02:00
1562f79101
sawg: expose config channel
2017-05-22 18:27:42 +02:00
6bdb76e9ea
core device logging controller WIP ( #691 )
2017-05-22 16:48:00 +08:00
5ccca74a3f
fold comm device into core device
2017-05-22 15:45:45 +08:00
3ed70afaa1
Use commandline prefix for controllers
...
This keeps them better organized and consistent with the artiq_* naming scheme.
Tab completion from aqctl_ also lists all the controllers installed on a machine.
2017-05-22 00:22:10 +08:00
b7a94d466d
fix experiment name conflict in phaser example
2017-05-18 23:14:55 +08:00
cd757c0f16
generate device database from executable python file
2017-05-18 23:14:55 +08:00
Florent Kermarrec
db3e1aef77
examples/phaser: adapt test_ad9154_prbs to new prbs in fabric
2017-05-15 16:12:02 +02:00
7ec14f26c2
examples: fix after introduction of RangeScan
2017-03-31 16:54:07 +08:00
856a64f6d2
drtio: use TTLInOut in device_db
2017-03-14 14:13:52 +08:00
553b8046ff
examples: add DMA LED blinker
2017-03-01 18:37:58 +08:00
7d6ebabc1b
reorganize core device communication code
2017-02-27 18:37:30 +08:00
f402b4af3f
drtio: fix typo in example device_db
2017-02-27 17:51:55 +08:00
fc0ce310a8
examples: fix dds_test RTIO underflow
2017-02-27 11:45:18 +08:00
dff23293c7
Merge branch 'master' of github.com:m-labs/artiq
2017-02-27 01:05:40 +08:00
whitequark
5d3b00cf12
Implement recording of DMA traces on the core device.
2017-02-26 02:50:20 +00:00
360be0098f
drtio: map local RTIO core on lower channels
2017-02-24 18:15:27 +08:00
43aad0914e
python3.5 -> python3
...
Many things also work with Python 3.6.
2017-01-30 09:24:43 +08:00
394ffd827e
phaser/demo_2tone: add ttl and led pulse
2017-01-11 21:45:34 +01:00
318dbb699b
fix phaser device_db SAWG channel numbers
2017-01-03 21:22:16 +01:00
8e9be41c73
reset core device in phaser examples
2017-01-03 20:05:22 +01:00
d29ec22497
remove stale phaser startup kernel
2017-01-03 20:03:55 +01:00
7ff77bceac
move AD9616 and AD9154 initialization to firmware
2017-01-03 16:11:38 +01:00
fb35336389
typo
2016-12-31 14:48:43 +01:00
708c25b83a
phaser: don't init rtio in startup_kernel
2016-12-14 19:16:07 +01:00
c63fa46430
Merge branch 'phaser2'
...
* phaser2: (157 commits)
sawg/hbf: tweak pipeline for timing
fir: register multiplier output
conda/phaser: build-depend on numpy
sawg: reduce coefficient width
sawg: fix latency
test/fir: needs mpl. don't run by default
test/sawg: patch spline
sawg: use ParallelHBFCascade to AA [WIP]
fir: add ParallelHBFCascade
fir: add ParallelFIR and test
gateware/dsp: add FIR and test
README_PHASER: update
sawg: documentation
sawg: extract spline
sawg: document
sawg: demo_2tone
sawg: round to int64
gateware/phaser -> gateware/ad9154_fmc_ebz
phaser: fix typo
sawg: merge set/set64
...
2016-12-12 17:31:39 +01:00
d6f6ebf066
sawg: demo_2tone
2016-12-02 18:18:47 +01:00
82c651c17a
phaser: remove trivial sawg demo
2016-11-29 15:40:23 +01:00
7816078d6b
phaser/demo: update
2016-11-29 15:11:18 +01:00
