591268a193
doc: use napoleon (for pdq2)
2017-01-25 23:25:01 +01:00
37fc7d58eb
doc: remove non-existent modules
2017-01-25 23:23:01 +01:00
d1be2f1a7d
doc: fix table
2017-01-25 23:22:26 +01:00
whitequark
de17908b38
Revert "Globally update UART baudrate to 921600."
...
This reverts commit b29e2d5bfe
2017-01-25 00:31:28 +00:00
whitequark
b29e2d5bfe
Globally update UART baudrate to 921600.
2017-01-24 22:25:58 +00:00
whitequark
e5085c063f
doc: test mode was removed, clean up.
2017-01-24 22:25:21 +00:00
b4f3be7e1b
doc: fix table formatting problem, add 'string constant' as supported compiler type
2017-01-16 13:58:09 -06:00
c2bddd62e1
doc: fix llvmlite installation instructions
2017-01-05 19:10:12 +01:00
fe53bab953
targets: kc705 -> kc705_dds
2017-01-05 18:40:56 +01:00
52fda27cb5
update copyright year
2017-01-04 11:29:10 +01:00
a3041fb23f
manual: fix Rust installation instructions
2017-01-01 16:56:01 +01:00
whitequark
c45a170bb4
firmware: update for Rust 1.16.0.
2016-12-26 17:20:29 +00:00
jboulder
baac555f96
add device for Korad KA3005P programmable DC power supply
2016-12-19 09:31:21 +01:00
c63fa46430
Merge branch 'phaser2'
...
* phaser2: (157 commits)
sawg/hbf: tweak pipeline for timing
fir: register multiplier output
conda/phaser: build-depend on numpy
sawg: reduce coefficient width
sawg: fix latency
test/fir: needs mpl. don't run by default
test/sawg: patch spline
sawg: use ParallelHBFCascade to AA [WIP]
fir: add ParallelHBFCascade
fir: add ParallelFIR and test
gateware/dsp: add FIR and test
README_PHASER: update
sawg: documentation
sawg: extract spline
sawg: document
sawg: demo_2tone
sawg: round to int64
gateware/phaser -> gateware/ad9154_fmc_ebz
phaser: fix typo
sawg: merge set/set64
...
2016-12-12 17:31:39 +01:00
5accb7a0ac
manual: add missing quote
2016-12-09 14:16:32 +08:00
5efd0fcea5
sawg: documentation
2016-12-06 19:25:40 +01:00
35200387b5
manual: precisions about TTL sampling
2016-12-03 11:24:40 +08:00
d5d17aca9e
Merge remote-tracking branch 'm-labs/master' into phaser2
...
* m-labs/master:
applets: compatibility with older Qt. Closes #629
doc: update LLVM configure command (fixes #628 ).
runtime: match argument signedness between ARTIQ Python and ksupport.
runtime: refactor rtio_output_list.
runtime: use correct ABI when accepting ARTIQ lists.
2016-11-29 14:49:30 +01:00
whitequark
2ec6d43441
doc: update LLVM configure command ( fixes #628 ).
2016-11-26 07:26:06 +00:00
f7e8961ab0
Merge branch 'master' into phaser
...
* master: (23 commits)
RELEASE_NOTES: update
pipistrello: add some inputs
Remove last vestiges of nist_qc1.
Fully drop AD9858 and kc705-nist_qc1 support (closes #576 ).
coredevice.dds: reimplement fully in ARTIQ Python.
compiler: unbreak casts to int32/int64.
analyses.constness: fix false positive on x[...].
inferencer: significantly improve the op-assignment diagnostic.
Fix tests.
Move mu_to_seconds, seconds_to_mu to Core.
artiq_devtool: don't crash on invalid utf-8.
artiq_devtool: detect a race condition during connect.
llvm_ir_generator: handle no-op coercions.
conda: use development version of migen/misoc
Revert accidentally committed code.
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
analyses.invariant_detection: implement (#622 ).
Fix whitespace.
coredevice.dds: work around the round(numpy.float64()) snafu.
coredevice.dds: update from obsolete int(width=) syntax (fixes #621 ).
...
2016-11-21 17:29:39 +01:00
93c310dfa5
pipistrello: add some inputs
2016-11-21 23:43:41 +08:00
whitequark
6aa5d9f6c6
Remove last vestiges of nist_qc1.
2016-11-21 15:36:22 +00:00
whitequark
5e8888d5f3
Fully drop AD9858 and kc705-nist_qc1 support ( closes #576 ).
2016-11-21 15:14:17 +00:00
whitequark
009d396740
Move mu_to_seconds, seconds_to_mu to Core.
2016-11-21 05:37:30 +00:00
whitequark
abf2b32b20
coredevice.dds: work around the round(numpy.float64()) snafu.
2016-11-20 09:49:58 +00:00
whitequark
2015fe9de0
doc: update installing_from_source for LLVM 3.9 transitionl
2016-11-18 10:35:36 +00:00
aedb6747f2
Merge branch 'master' into phaser
...
* master: (47 commits)
runtime: disable the Nagle algorithm entirely.
runtime: buffer RPC send packets.
runtime: don't print debug messages to the UART.
runtime: print microsecond timestamps in debug messages.
artiq_devtool: abort if build failed.
conda: bump llvmlite-artiq dep.
conda: bump llvmlite-artiq dep.
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
artiq_devtool: more robust port forwarding.
setup: remove paramiko dependency (optional and developer-only)
artiq_devtool: implement.
artiq_compile: actually disable attribute writeback.
conda: use pythonparser 1.0.
conda: tighten pythonparser dependency (fixes #600 ).
doc: clarify kernel_invariant doc (fixes #609 ).
compiler: Emit all-kernel_invariant objects as LLVM constants
conda: update for LLVM 3.9.
add has_dds, use config flags
Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
Revert "Revert "Revert "Update for LLVM 3.9."""
...
2016-11-13 16:54:28 +01:00
whitequark
eee8d05398
doc: clarify kernel_invariant doc ( fixes #609 ).
2016-11-09 14:59:57 +00:00
whitequark
f102f2d4e6
manual: fix rustc invocation.
2016-11-04 09:11:45 +00:00
9d58b4516c
manual: Vivado is now default
2016-11-04 11:54:04 +08:00
whitequark
208f3f8568
manual: fix Rust installation instructions.
2016-11-04 03:35:59 +00:00
77bc247744
manual: add missing cd
2016-11-04 00:04:26 +08:00
a252b88a36
manual: fix binutils patch download URL
2016-11-03 23:56:13 +08:00
whitequark
cd68577dbc
compiler: add support for async RPCs.
2016-10-30 00:57:31 +00:00
6d07a16c62
Merge branch 'master' into phaser
...
* master: (72 commits)
gateware: extend mailbox to 3 entries.
master/worker_db: set default value for archive
master: keep dataset manager consistent when set_dataset is called with contradictory attributes
master: archive input datasets. Closes #587
master: ensure same dataset is in broadcast and local when mutating
scheduler: default submission arguments, closes #577
pdq2: sync with pdq2
doc: clarify usage of pause/check_pause, closes #571
dashboard/datasets: use scientific spinbox and increase number of decimals, closes #572
gateware/spi: fix import
runtime: fix use of $(realpath) in Makefile.
test: fix printf specifier.
llvm_ir_generator: make sure RPC allocations are not underaligned.
runtime: use i64 for watchdog timeout, not i32.
runtime: port ksupport to Rust.
runtime: remove some redundant libm functions copied inline.
language: Add "A" (ampere) as well-known unit for arguments
conda: misoc 0.4 (csr)
runtime: cap log level at debug.
runtime: discard unnecessary sections.
...
2016-10-28 01:40:11 +02:00
69099691f7
doc: clarify usage of pause/check_pause, closes #571
2016-10-17 20:08:15 +08:00
18d18b6685
phaser: add sync ttl input for monitoring
2016-10-10 17:13:23 +02:00
4d87f0e9e0
phaser: instantiate jesd204b core, wire up
2016-10-06 14:44:22 +02:00
c54b6e2f3c
phaser: add README
2016-10-05 19:24:34 +02:00
4a0eaf0f95
phaser: add jesd204b rtio dds
...
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
2016-10-05 16:17:50 +02:00
82fbd3e9c9
doc: CCBs, applet setup from experiment
2016-09-09 23:25:29 +08:00
4ef5eb2644
doc: move VADJ, closes #554
2016-09-09 18:40:58 +08:00
c38e2cda9d
doc/manual: no analytics_id with rtd
2016-08-25 22:21:29 +02:00
0a4d4e30ef
doc: use sphinx_rtd_theme
2016-08-25 21:52:46 +02:00
8753785ef7
doc/rtio: cleanup
2016-08-25 20:42:44 +02:00
9f7c33ca84
doc/rtio: make vis coloring consistent
2016-08-25 19:23:06 +02:00
c2e0e0bd7e
doc/rtio: vis RTIOUndeflow tweak
2016-08-25 19:14:31 +02:00
8f952fdb98
doc/rtio: vis RTIOUnderflow
2016-08-25 19:06:11 +02:00
446dcf2123
doc/rtio: input vis
2016-08-25 18:42:16 +02:00
eb180da730
doc/rtio: vis: now_mu -> now since not didactically relevant
2016-08-25 18:18:02 +02:00
aabe53e5fa
doc/rtio: handover vis, tweak other vis's
2016-08-25 18:15:48 +02:00
7481d4e732
doc/rtio: sync() visualization
2016-08-25 14:51:34 +02:00
aee0345ed7
doc: ship wavedrom js b/c https
2016-08-25 12:56:36 +02:00
60919c2ea7
doc: use wavedrom to visualize stuff
2016-08-25 12:17:05 +02:00
552146bd08
doc/rtio: fix description of idle kernel/reset
2016-08-25 12:17:05 +02:00
69ea3d3cc0
doc: rtio concepts, closes #451
2016-08-24 17:39:03 +02:00
df876a4e06
doc: expand/refine getting_started_core
2016-08-23 18:01:34 +02:00
5adda1c4c8
doc: cleanup git checkout instructions (see #542 )
2016-08-23 18:00:54 +02:00
whitequark
9a0c3dae93
doc: add our binutils patch to installing_from_source.
2016-08-21 19:55:59 +00:00
whitequark
cea57e2b46
doc: update installing_from_source.
2016-08-21 02:16:48 +00:00
728aff71ae
manual: explain how applets work. Closes #536
2016-08-11 19:09:47 +08:00
whitequark
3dc0101459
doc: explain monomorphism of user-defined classes.
...
Fixes #523 .
2016-08-03 23:18:54 +00:00
ecda94705e
doc/management_system: point out check_pause() ( closes #522 )
2016-07-21 16:42:09 +02:00
06bb1a2774
doc/installing_from_source: update/fix ( closes #516 )
2016-07-21 16:33:51 +02:00
d2d897a885
manual/getting_started: add examples location info, closes #501
2016-07-07 12:43:10 +08:00
ea10a2af6e
manual/faq: update for inter-experiment seamless handover
2016-07-07 12:42:46 +08:00
18eddd00e1
manual: add core.reset() calls
2016-06-29 11:48:33 +08:00
3befe37221
manual: minor cleanup
2016-06-22 10:01:56 +08:00
48c0812df0
manual: split source install instructions to a separate page
2016-06-22 09:45:56 +08:00
2912515e5c
doc: add warning about pipistrello current draw
2016-06-11 10:26:35 -06:00
ca9724f517
doc: add core device comms details
2016-06-11 10:01:15 -06:00
whitequark
284e0d6876
doc: update installing.rst to reflect openocd packaged in conda.
2016-06-04 07:53:53 +00:00
e8aadd0a1a
doc: document common KC705 problems. Closes #450
2016-06-03 23:20:38 -04:00
5ce155614e
doc/getting_started_mgmt: adapt to changes. Closes #462
2016-06-03 23:10:00 -04:00
5ebd28f576
doc: fix bool input
2016-06-03 22:56:12 -04:00
10267f39c9
log: use broadcast instead of sync_struct, filter on new messages only ( #411 )
2016-05-27 23:43:29 -05:00
a6afc16585
doc/manual: add links to source code
2016-05-27 19:01:14 +02:00
e98fdfa7ca
manual/installing: mention netmask and gateway. Closes #441
2016-05-25 10:32:36 -05:00
dhslichter
141edb521a
qc2: swap SPI/TTL, all TTL lines are now In+Out compatible
2016-05-19 10:42:03 +08:00
9898daf9a4
README: DOI/citation format
2016-05-11 15:23:28 +02:00
whitequark
79c7c2dd45
doc: explain RPC return type annotations.
...
Fixes #410 .
2016-04-29 12:09:14 +00:00
e8ae6fcd9f
doc: move compiler details to separate chapter
2016-04-27 01:35:40 +08:00
whitequark
00c0a306ef
doc: Document fast-math flag and kernel invariants.
...
Fixes #351 , #359 .
2016-04-26 02:15:16 +00:00
faa268e814
manual/installing: --toolchain vivado
2016-04-14 01:25:36 +08:00
6fc73a0256
manual/installing: -H nist_...
2016-04-14 01:20:13 +08:00
a5038726be
typo
2016-04-14 01:17:56 +08:00
dd0e622e4a
manual/faq: list HITL TTL connections
2016-04-14 01:01:51 +08:00
7d2fa951d6
manual/git: commit needed before starting master, refresh. Closes #387
2016-04-14 00:33:56 +08:00
dhslichter
f395a630e0
Updated qc2 pinouts for SPI and 2x DDS bus, update docs
2016-04-13 18:38:34 +08:00
56af4e9147
doc/installing: add note about example dependencies
2016-04-11 17:03:49 +08:00
36c1fdb5ad
installing.rst: typo
2016-04-10 21:01:00 +08:00
62eae5eb34
installing.rst: adapters renaming from ed1c368
2016-04-10 11:21:09 +08:00
7f7750eef2
installing.rst: triple colons
2016-04-10 11:17:45 +08:00
26f55f2010
installing.rst: update, clarify
2016-04-09 23:58:11 +08:00
4e802f844d
README: rewrite, summarizing more aspects of ARTIQ
2016-04-09 23:55:27 +08:00
4c32334d90
introduction.rst: update license
2016-04-09 21:33:25 +08:00
whitequark
32102bc25f
doc: use proper CMAKE_BUILD_TYPE for LLVM.
...
Fixes #380 .
2016-04-06 22:05:55 +00:00
eb68ab9ad0
doc: remote execution
2016-04-06 19:13:41 +08:00
221d1bde0c
manual/developing_a_ndsp: update to new bind interface
2016-04-06 19:13:01 +08:00
e1da9de39d
manual/faq: cleanup/update
2016-04-05 14:17:06 +08:00
affe4d45aa
ship examples with package
2016-04-05 13:59:39 +08:00
3efb841557
client: add --async option to scan-repository, recommend usage in git post-receive
2016-04-04 22:17:39 +08:00
7453d85d5e
GUI -> dashboard
2016-04-04 22:12:45 +08:00
c6516f3c83
doc: conda channel -> label
2016-03-31 10:29:07 +02:00
d561681cc1
doc: add note about xcb ( closes #361 )
2016-03-31 10:28:57 +02:00
05317a9259
manual: QC2 FMC voltage
2016-03-31 10:47:16 +08:00
1a513634ff
doc/tutorial: add missing type annotation in LED example. Closes #356
2016-03-29 14:53:52 +08:00
4c622194c2
doc: update flterm instructions. Closes #346
2016-03-25 20:10:53 +08:00
22cd12f721
doc: correctly place the openocd section, link it, add explanation
2016-03-20 20:19:12 +01:00
Joe Britton
d069380f6b
Fix typo. And in build of openocd on Ubuntu the aclocal dependency is provided by automake.
...
adduser requires root
conda installation requires user to build OpenOCD by hand.
2016-03-20 20:18:32 +01:00
8e41d50145
doc: add pipistrello adapter explicitly ( closes : #339 )
2016-03-20 19:57:07 +01:00
878ab9a39b
manual: document DDS and SPI RTIO channels
2016-03-10 22:38:49 +08:00
1739e0f2f8
coredevice: put cache into separate file/device
2016-03-10 10:46:19 +08:00
f0b0b1bac7
support for multiple DDS buses (untested)
2016-03-09 17:12:50 +08:00
f33baf339f
pipistrello: drop ttls on pmod, add leds back in
2016-03-08 23:34:51 +01:00
f39208c95a
pipistrello: try with fewer leds/pmod ttl
2016-03-08 22:10:47 +01:00
104d641c59
pipistrello: move the spi channel like kc705
2016-03-08 13:30:05 +01:00
40c1cde2e2
doc: kc705.clock: add spi bus mappings ( closes #321 )
2016-03-08 13:28:32 +01:00
9898cb14db
doc: add pipistrello spi bus
2016-03-08 13:18:55 +01:00
e23e91f8ac
doc: add pipistrello pmod ttl channels
2016-03-08 13:13:33 +01:00
2770d9c729
doc: I2C/QC2
2016-03-05 19:02:03 +08:00
669fbaa4f1
ad53xx->ad5360 and refactor
2016-03-04 00:00:25 +01:00
f754d2c117
Merge branch 'spimaster'
...
* spimaster: (52 commits)
runtime/rtio: rtio_process_exceptional_status() has only one user
coredevice.spi, doc/manual: add spi
kc705: move ttl channels together again, update doc
runtime: rt2wb_input -> rtio_input_data
examples/tdr: adapt to compiler changes
bridge: really fix O/OE
runtime: define constants for ttl addresses
coredevice.ttl: fix sensitivity
bridge: fix ttl o/oe addresses
runtime: refactor ttl*()
rtio: rm rtio_write_and_process_status
coredevice.spi: unused import
rt2wb, exceptions: remove RTIOTimeout
gateware.spi: delay only writes to data register, update doc
nist_clock: disable spi1/2
runtime/rt2wb: use input/output terminology and add (async) input
examples: update device_db for nist_clock spi
gateware.spi: rework wb bus sequence
nist_clock: rename spi*.ce to spi*.cs_n
nist_clock: add SPIMasters to spi buses
...
2016-03-01 22:08:08 +01:00
0456169558
coredevice.spi, doc/manual: add spi
2016-03-01 21:29:09 +01:00
2cc1dfaee3
kc705: move ttl channels together again, update doc
2016-03-01 19:40:32 +01:00
8fa98f6486
doc: use term 'gateware'
...
FPGA newcomers are not used to the term 'bitstream'. To insist that this file
is the result of the gateware compilation and thus the binary FPGA format,
add the term 'gateware' as a prefix.
2016-02-29 20:50:45 +01:00
5fad570f5e
targets/kc705-nist_clock: add clock generator on LA32 for testing purposes
2016-03-01 00:35:26 +08:00
a1e1f2b387
doc: insist that output() must be called on TTLInOut. Closes #297
2016-03-01 00:28:40 +08:00
d0d56bd3fe
doc: update install instructions
2016-03-01 00:19:55 +08:00
5d41113dbc
doc: convert to 'with parallel'
2016-02-23 15:53:41 +08:00
whitequark
51a5910002
Rename 'with parallel' to 'with interleave' ( #265 ).
2016-02-22 13:24:43 +00:00
be6b64a243
doc: fix conda install instructions
2016-02-22 17:52:18 +08:00
14683f297a
doc: remove 'Ubuntu 15.10+/Debian jessie+ specific instructions'. Closes #282
2016-02-22 12:08:22 +08:00
122ddc40aa
doc: add section for RTIO analyzer, mention GtkWave
2016-02-15 23:07:41 +01:00
whitequark
617c416124
Add documentation for rtio_log ( #206 ).
2016-02-15 21:43:02 +00:00
whitequark
3da9bfc704
doc: binutils patch is not needed any more.
2016-02-15 18:25:15 +00:00
b97be9c08d
Merge branch 'newtesting'
2016-02-14 21:30:19 +01:00
b68035d162
manual/installing: refresh
2016-02-10 23:37:21 +01:00
64263b75d0
use https for m-labs.hk
2016-02-10 17:20:29 +01:00
9ca8b48bf9
assume 'import artiq' works before running tests
2016-02-02 21:52:33 +01:00
b7de92e96c
remove pxi6733 support (now lives at https://github.com/m-labs/aq_ni6733
2016-02-02 18:41:57 +01:00
0d7dc7b144
doc: update Underflow catching example
2016-01-25 17:24:00 -07:00
765001054d
artiq.experiment: merge language and coredevice namespaces
...
perl -i -pe 's/^from artiq import \*$/from artiq.experiment import */' your_experiments/*.py
(assuming you skipped the changes form the previous commit)
2016-01-25 17:24:00 -07:00
fbe4d96572
artiq: move namespace artiq.* -> artiq.language.*
...
perl -i -pe 's/^from artiq import \*$/from artiq.language import */' your_experiments/*.py
2016-01-25 17:24:00 -07:00
ea3bb27029
doc/manual: cleanup commented out variables
2016-01-25 17:23:49 -07:00
0bbed9bcb6
RELEASING.rst, doc: show release notes in manual
2016-01-25 17:20:15 -07:00
b56c55a90d
manual: __version__ cleanup
2016-01-25 17:04:56 -07:00
0151ac55ff
ppp: update documentation
2016-01-25 12:29:05 -07:00
fa1afb7dd8
add information about CLOCK hardware
2016-01-20 21:06:02 -05:00
e42fd9ca31
doc: use actual version
2016-01-19 18:25:31 -07:00
cf17be92e3
doc: add artiq_flash
2016-01-18 21:41:42 -07:00
cb2513f8ba
manual: fix coreconfig label
2016-01-13 14:42:05 -07:00
adf552e8d1
manual: artiq.coredevice.runtime_exceptions -> artiq.coredevice.exceptions
2016-01-13 14:40:44 -07:00
e4996fed92
manual/thorlabs_tcube: add note about USB/power sequencing
2016-01-13 14:38:22 -07:00
0b37000874
manual: add core device analyzer TCP port
2016-01-13 14:02:37 -07:00
1543141cee
update copyright year
2016-01-08 11:53:04 +08:00
028ed72b72
doc: typo
2016-01-07 10:06:43 +08:00
0bbe886669
doc/manual: umask warning and openocd installation refinement
2016-01-06 13:12:42 -07:00
358ad2e927
artiq_flash: drop redundant instruction, tweak doc
2016-01-06 11:24:05 -07:00
25ce0928bd
build/doc: simplify proxy bitstream locations
2016-01-05 10:23:50 -07:00
d633c8e1f8
doc: update and cleanup flashing/installing/building
2016-01-05 10:21:34 +08:00
5f3b69dd19
frontend/coreconfig: simplify action names
2015-12-24 18:54:23 +08:00
179c50480f
frontend: split coretool into coreconfig, corelog and coreanalyzer
2015-12-24 18:51:11 +08:00
7548229910
doc/manual/installing: remove outdated note
2015-12-11 10:32:01 +08:00
5e14afde3e
scheduler: use current (last scanned) repo revision instead of HEAD
2015-12-06 19:00:41 +08:00
whitequark
d560b579f0
doc: update mention of int64.
2015-11-24 20:24:38 +08:00
whitequark
d732b6c6d4
doc: nested lists are now supported.
2015-11-24 17:53:40 +08:00
whitequark
c14299dca8
Merge branch 'new-py2llvm'
2015-11-24 03:01:54 +08:00
whitequark
9fc7a42036
pipistrello: expose LED{1..4} as RTIO channels.
2015-11-23 18:26:45 +08:00
Felix Held
8b4b269371
doc/manual/installing: fix a bug, add Fedora specific instructions
...
Signed-off-by: Felix Held <felix-artiq@felixheld.de>
2015-11-21 10:23:58 +08:00
whitequark
51f04f6311
Explicitly use the python3.5 binary everywhere.
2015-11-07 13:39:39 +03:00
b13ee2ed8f
doc: update compilation instructions
2015-11-04 23:38:24 +08:00
73fed53c09
manual: document startup clock and kernel
2015-11-01 00:24:44 +08:00
e6b230b71c
Merge branch 'master' of github.com:m-labs/artiq
2015-10-30 13:41:45 +08:00
2c77c80b4f
master: expose more scheduler APIs to the experiments
2015-10-30 13:41:18 +08:00
whitequark
ff93e3c149
manual: update installing.rst to elaborate QC1/QC2 differences.
2015-10-30 05:07:01 +03:00
whitequark
62419c0952
manual: update installing.rst.
2015-10-30 04:18:42 +03:00
3044a053e1
databases: assume empty dataset_db if file not present. Closes #156
2015-10-24 10:15:20 +08:00
whitequark
f3e61e265c
conda: move everything except artiq to conda-recipes ( closes #138 ).
2015-10-16 07:06:22 +03:00
cbda753f44
master: TCP server for remote logging
2015-10-16 00:53:35 +08:00
ef487ee8b0
doc: more updates for dataset API
2015-10-13 18:45:04 +08:00
fc4791bbbe
doc: new dataset API
2015-10-13 18:11:17 +08:00
ceb18d05b3
manual/management: add warning about setups that resolve the current hostname to localhost. closes #134
2015-10-13 01:47:18 +08:00
5f89d1a78f
doc: document core device driver. Closes #119
2015-10-06 18:12:57 +08:00
50a5a3baf0
environment: attr_* -> setattr_*
2015-10-04 00:18:21 +08:00
125503139e
remove workaround for Python bug in asyncio process.wait(). Requires Python 3.5. Closes #58
2015-10-03 14:33:18 +08:00
cd3107ba75
do not use deprecated asyncio.JoinableQueue
2015-10-03 13:59:18 +08:00
01416bb0be
copyright: claim contributions
...
These are contributions of >= 30% or >= 20 lines (half-automated).
I hereby resubmit all my previous contributions to the ARTIQ project
under the following terms:
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/ >.
Closes #130
Signed-off-by: Robert Jordens <jordens@gmail.com>
2015-09-06 16:08:57 -06:00
2bd27a3170
update copyright/license
2015-09-05 15:50:34 -06:00
Yann Sionneau
f602928e89
manual: ARTIQ requires python 3.4.3 or above
2015-09-01 16:46:12 +02:00
Yann Sionneau
2056831c05
manual: add install instructions for pygit2
2015-08-28 17:50:39 +02:00
1cace1cd91
style
2015-08-28 16:30:33 +08:00
031d8d0890
doc/manual: add note about bidirectional TTL in tutorial
2015-08-28 16:29:56 +08:00
Yann Sionneau
241b7651a2
manual: fix typo in package name
2015-08-28 09:51:53 +02:00
Yann Sionneau
4d84ec7742
update lx45 bscan bitstream url which wget could not fetch on some systems
2015-08-27 21:38:00 +02:00
Yann Sionneau
4cb0d4589e
manual: fix some typos
2015-08-26 16:14:16 +02:00
8aec02dfcf
Merge branch 'master' of github.com:m-labs/artiq
2015-08-26 20:43:12 +08:00
2c893ba0a2
doc/manual: add results to mgmt tutorial
2015-08-26 20:40:37 +08:00
947acb1f90
manual: management system tutorial, Git integration
2015-08-26 20:23:50 +08:00
Yann Sionneau
7b0b1d6860
manual: Windows (32 and 64-bit) users should install 32-bit miniconda/anaconda
2015-08-26 14:22:13 +02:00
