2
0
mirror of https://github.com/m-labs/artiq.git synced 2024-12-25 11:18:27 +08:00

manual: add install instructions for pygit2

This commit is contained in:
Yann Sionneau 2015-08-28 17:50:39 +02:00
parent 1cace1cd91
commit 2056831c05

View File

@ -203,6 +203,12 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC
$ git clone --recursive https://github.com/m-labs/artiq
$ python3 setup.py develop --user
.. note::
If you have any trouble during ARTIQ setup about ``pygit2`` installation,
refer to the section dealing with
:ref:`installing the host-side software <installing-the-host-side-software>`.
* Build and flash the bitstream and BIOS by running `from the MiSoC top-level directory`:
::
@ -239,6 +245,8 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC
The communication parameters are 115200 8-N-1.
.. _installing-the-host-side-software:
Installing the host-side software
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@ -257,6 +265,27 @@ Installing the host-side software
$ cd artiq
$ python3 setup.py develop --user
.. note::
If you have any trouble during ARTIQ setup about ``pygit2`` installation,
you can install it by using ``pip``:
On Ubuntu 14.04::
$ pip install --user pygit2==0.19.1
On Ubuntu 14.10::
$ pip install --user pygit2==0.20.3
On Ubuntu 15.04 and 15.10::
$ pip install --user pygit2==0.22.1
The rationale behind this is that pygit2 and libgit2 must have the same
major.minor version numbers.
See http://www.pygit2.org/install.html#version-numbers
* Build the documentation: ::
$ cd ~/artiq-dev/artiq/doc/manual
@ -338,7 +367,7 @@ Ubuntu 14.04 specific instructions
This command installs all the required packages: ::
$ sudo apt-get install build-essential autotools-dev file git patch perl xutils-dev python3-pip texinfo flex bison libmpc-dev python3-serial python3-dateutil python3-prettytable python3-setuptools python3-numpy python3-scipy python3-sphinx python3-h5py python3-dev python-dev subversion cmake libusb-dev libftdi-dev pkg-config
$ sudo apt-get install build-essential autotools-dev file git patch perl xutils-dev python3-pip texinfo flex bison libmpc-dev python3-serial python3-dateutil python3-prettytable python3-setuptools python3-numpy python3-scipy python3-sphinx python3-h5py python3-dev python-dev subversion cmake libusb-dev libftdi-dev pkg-config libffi-dev libgit2-dev
Note that ARTIQ requires Python 3.4 or above.