doc: update install instructions

This commit is contained in:
Sebastien Bourdeauducq 2016-03-01 00:19:50 +08:00
parent 4467f91cbf
commit d0d56bd3fe
1 changed files with 17 additions and 9 deletions

View File

@ -40,13 +40,16 @@ If your ``$PATH`` misses reference the ``miniconda3/bin`` or ``anaconda3/bin`` y
$ export PATH=$HOME/miniconda3/bin:$PATH
Installing the host side software
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Installing the ARTIQ packages
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
For this, you need to add our Anaconda repository to your conda configuration::
$ conda config --add channels http://conda.anaconda.org/m-labs/channel/main
$ conda config --add channels http://conda.anaconda.org/m-labs/channel/dev
.. note::
To use the development versions of ARTIQ, also add the ``dev`` channel (http://conda.anaconda.org/m-labs/channel/dev).
Development versions contain more features, but are not as well-tested and are more likely to contain bugs or inconsistencies.
Then you can install the ARTIQ package, it will pull all the necessary dependencies.
@ -60,7 +63,12 @@ Then you can install the ARTIQ package, it will pull all the necessary dependenc
$ ENV=$(date +artiq-%Y-%m-%d); conda create -n $ENV artiq-kc705-nist_qc1; \
echo "Created environment $ENV for ARTIQ"
* For the KC705 board with the FMC backplane and AD9914 DDS chips::
* For the KC705 board with the "clock" FMC backplane and AD9914 DDS chips::
$ ENV=$(date +artiq-%Y-%m-%d); conda create -n $ENV artiq-kc705-nist_clock; \
echo "Created environment $ENV for ARTIQ"
* For the KC705 board with the QC2 FMC backplane and AD9914 DDS chips::
$ ENV=$(date +artiq-%Y-%m-%d); conda create -n $ENV artiq-kc705-nist_qc2; \
echo "Created environment $ENV for ARTIQ"
@ -89,7 +97,9 @@ You now need to flash 3 things on the FPGA board:
2. The BIOS
3. The ARTIQ runtime
First you need to :ref:`install openocd <install-openocd>`. Then, you can flash the board:
They are all shipped in our Conda packages, along with the required flash proxy bitstreams.
First you need to install OpenOCD. Then, you can flash the board:
* For the Pipistrello board::
@ -97,11 +107,9 @@ First you need to :ref:`install openocd <install-openocd>`. Then, you can flash
* For the KC705 board::
$ artiq_flash
$ artiq_flash -m [qc1/clock/qc2]
Next step (for KC705) is to flash MAC and IP addresses to the board:
* See :ref:`those instructions <flash-mac-ip-addr>` to flash MAC and IP addresses.
For the KC705, the next step is to flash the MAC and IP addresses to the board. See :ref:`those instructions <flash-mac-ip-addr>`.
.. _install-from-sources: