8691f69a3c
gateware/rtio/analyzer: suppress spurious initial reset messages
2015-12-21 18:32:08 +08:00
5769107936
gateware/rtio: keep counter clock domain transfer active during CSR reset
2015-12-20 22:12:34 +08:00
46f59b673f
coredevice: analyzer message decoding
2015-12-20 14:34:16 +08:00
1638f0fa9b
gateware/rtio/analyzer: fix event ordering
2015-12-19 17:04:30 +08:00
64ad38854b
gateware/rtio/analyzer: fix exception message layout
2015-12-18 18:27:06 +08:00
59a3ea4f15
gateware/rtio/analyzer: fix bus write
2015-12-18 15:44:20 +08:00
4def561710
targets: integrate RTIO analyzer
2015-12-16 17:36:52 +08:00
afaad270cc
rtio/analyzer: fix superficial mistakes
2015-12-16 17:36:36 +08:00
33860820b9
gateware/soc: use new SDRAM API call
2015-12-16 14:59:35 +08:00
bf29e8ddc6
kc705: make config[] usage consistent
2015-12-15 12:14:30 -07:00
4362f97d67
gateware/rtio/analyzer: complete, untested
2015-12-14 23:53:14 +08:00
b5f2e178f6
rtio/analyzer: message encoder
2015-12-14 00:37:08 +08:00
7886827b80
CSRConstant: also port DDS constants
2015-12-04 18:27:59 +08:00
5db1f9794e
top.add_constant() -> top.config[] (CSRConstant)
...
This is to be synchronized with the corresponding change in misoc.
2015-12-04 18:27:54 +08:00
whitequark
c14299dca8
Merge branch 'new-py2llvm'
2015-11-24 03:01:54 +08:00
whitequark
9fc7a42036
pipistrello: expose LED{1..4} as RTIO channels.
2015-11-23 18:26:45 +08:00
ae99af27ee
runtime,gateware: use new misoc identifier
2015-11-10 22:44:38 +08:00
e749bae302
package everything to rebuild core device binaries
2015-11-09 10:47:14 +08:00
whitequark
51f04f6311
Explicitly use the python3.5 binary everywhere.
2015-11-07 13:39:39 +03:00
ad5a32fb6e
targets/kc705: remove unneeded argument on qc2
2015-11-04 20:09:37 +08:00
e26147b2ac
gateware,runtime: use new migen/misoc
2015-11-04 00:35:03 +08:00
e46ba83513
rtio/dds: use rio_phy domain to reset FTW tracker. Closes #120
2015-10-04 22:53:51 +08:00
01416bb0be
copyright: claim contributions
...
These are contributions of >= 30% or >= 20 lines (half-automated).
I hereby resubmit all my previous contributions to the ARTIQ project
under the following terms:
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/ >.
Closes #130
Signed-off-by: Robert Jordens <jordens@gmail.com>
2015-09-06 16:08:57 -06:00
90ce54d8d5
gateware/dds/monitor: support onehot selection, strip reset
2015-08-27 15:54:01 +08:00
d38f1e6796
ad9xxx: fix gpio signal length
2015-08-22 13:12:30 +08:00
094fc1cfd1
qc2: DDS selection is active low
2015-08-22 11:49:38 +08:00
1d34c06d79
rtio: detect collision errors
2015-07-29 19:43:35 +08:00
fb339d294e
serdes_s6: no need to reset
2015-07-28 12:54:31 -06:00
9ac5bc52d4
rtio: add spartan6 serdes, 4x and 8x
2015-07-27 21:01:15 -06:00
b1d58bd4c8
rtio: fix replace/sequence_error when fine_ts_width > 0
2015-07-27 12:22:35 +08:00
959b7a7b46
rtio: resetless -> reset_less
2015-07-27 11:46:56 +08:00
fe6a5c42df
rtio: remove unused clk_freq argument
2015-07-27 10:57:15 +08:00
5b50f5fe05
rtio/ttl_serdes_7series: use recommended OSERDES T configuration
2015-07-27 10:50:50 +08:00
f68d5cbd73
rtio: forward rtio domain reset to rio and rio_phy domains
2015-07-27 01:52:47 +08:00
940aa815dd
rtio/ttl_serdes: cleanup/rewrite
2015-07-27 01:44:52 +08:00
Yann Sionneau
d90dff4ef1
rtio: add SERDES TTL (WIP)
2015-07-26 17:40:34 +08:00
47191eda91
dds monitor: relax timing (for pipistrello)
2015-07-19 21:36:51 -06:00
66940ea815
rtio: disable NOP suppression after reset and underflow
2015-07-15 20:54:55 +02:00
34aacd3c5f
complete AD9914 support (no programmable modulus, untested)
2015-07-08 17:22:43 +02:00
8a33d8c868
never stop RTIO counter
2015-07-07 15:29:38 +02:00
58c0150822
ttl: improve clockgen doc
2015-07-05 19:07:13 +02:00
753d61b38f
complete support for TTL clock generator
2015-07-04 18:36:01 +02:00
2881d5f00a
gateware: add RTIO clock generator
2015-07-02 18:20:26 +02:00
23eee94458
pipistrello: add notes to nist_qc1 about dds_clock
...
* remove xtrig from the target as it is not usually connected (used for
dds_clock) and ignore PMT2/BTN2 as C:15 is used for dds_clock.
* this also aligns the ttl channel numbers with kc705/nist_qc1 (two pmt
inputs followed by 16 ttl outputs followed by leds)
2015-06-28 20:56:12 -06:00
944bfafefa
soc: support QC2 and AD9914 (untested)
2015-06-28 21:37:27 +02:00
Yann Sionneau
9c96ebf7d4
nist_qc2: add fmc adapter io file
2015-06-25 03:06:15 +02:00
45ec5dbe84
ad9858: make wb data 8 bit wide
...
matches actual dds bus data width and saves bram
2015-06-20 23:53:01 -06:00
f47c2e54e1
DDS monitor fixes
2015-06-19 17:36:46 -06:00
5a9bdb2e33
DDS monitoring
2015-06-19 15:30:17 -06:00
Florent Kermarrec
38a0f63bd2
gateware/soc: use Minicon SDRAM controller and 128KB shared L2 cache
2015-06-18 12:18:03 +02:00
