Commit Graph

57 Commits

Author SHA1 Message Date
Robert Jördens 01416bb0be copyright: claim contributions
These are contributions of >= 30% or >= 20 lines (half-automated).

I hereby resubmit all my previous contributions to the ARTIQ project
under the following terms:

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Closes #130

Signed-off-by: Robert Jordens <jordens@gmail.com>
2015-09-06 16:08:57 -06:00
Robert Jördens 55708e8678 pipistrello: drop bitgen_opt change (done upstream) 2015-07-29 11:45:15 -06:00
Robert Jördens 67715f0d2e pipistrello: only put serdes on the lower ttls
this setup is getting a bit power hungry.

pmt0, 1 (rtio channels 0, 1): 4x in and out
ttl0, 1 (rtio channels 2, 3): 4x out
ttl2 (rtio channel 4): 8x out
2015-07-28 12:54:31 -06:00
Robert Jördens 9dfbf07743 pipistrello: use 4x serdes for rtio ttl
pipistrello: do not wait for lock on startup

LCK_cycle:6 was added in 6a412f796e1 (mibuild). It waits for _all_
DCM and PLLs to lock (probably irrespective of STARTUP_WAIT).
2015-07-28 12:54:27 -06:00
Robert Jördens 1809a70f5c Revert "pipistrello: use 4x serdes for rtio ttl"
This reverts commit 8e92cc91f5.

Broken. Will revisit.
2015-07-27 23:39:35 -06:00
Robert Jördens e95b06e96d pipistrello: tie unused dds.p low 2015-07-27 21:48:56 -06:00
Robert Jördens 8e92cc91f5 pipistrello: use 4x serdes for rtio ttl 2015-07-27 21:29:50 -06:00
Sebastien Bourdeauducq 117b361a06 Merge branch 'master' of github.com:m-labs/artiq 2015-07-27 11:42:29 +08:00
Sebastien Bourdeauducq fe6a5c42df rtio: remove unused clk_freq argument 2015-07-27 10:57:15 +08:00
Robert Jördens d65d303ac6 pipistrello: remove unused constraint kwarg 2015-07-26 17:39:07 -06:00
Sebastien Bourdeauducq 34aacd3c5f complete AD9914 support (no programmable modulus, untested) 2015-07-08 17:22:43 +02:00
Robert Jördens 959ba99f1c pipistrello: try simpler constraints 2015-07-04 21:08:28 -06:00
Sebastien Bourdeauducq 753d61b38f complete support for TTL clock generator 2015-07-04 18:36:01 +02:00
Sebastien Bourdeauducq 2881d5f00a gateware: add RTIO clock generator 2015-07-02 18:20:26 +02:00
Robert Jördens 3ee2bd5fa8 pipistrello: set CLKFX_MD_MAX from MD ratio 2015-06-29 12:59:59 -06:00
Robert Jördens d1c4cf0b78 pipistrello: update rtio channel doc 2015-06-29 12:21:54 -06:00
Robert Jördens f0ac8cb354 pipistrello: add user_led:2 for debugging w/o adapter 2015-06-29 11:30:37 -06:00
Robert Jördens d39382eca0 pipistrello: ext_led fifo depth 4 2015-06-28 22:06:33 -06:00
Robert Jördens 165ef20ffa pipistrello: drop rtio fifos for invisible leds
the main board leds are all under the adapter board

also tweak fifo depths a bit in a feeble attempt to circumvent a ISE hang (par
phase 4)
2015-06-28 21:24:57 -06:00
Robert Jördens e2cb0e107f pipistrello: really do not request xtrig 2015-06-28 21:11:41 -06:00
Robert Jördens 23eee94458 pipistrello: add notes to nist_qc1 about dds_clock
* remove xtrig from the target as it is not usually connected (used for
  dds_clock) and ignore PMT2/BTN2 as C:15 is used for dds_clock.
* this also aligns the ttl channel numbers with kc705/nist_qc1 (two pmt
  inputs followed by 16 ttl outputs followed by leds)
2015-06-28 20:56:12 -06:00
Sebastien Bourdeauducq 944bfafefa soc: support QC2 and AD9914 (untested) 2015-06-28 21:37:27 +02:00
Sebastien Bourdeauducq a7bbcdc1ad targets/pipistrello: mon -> moninj 2015-06-27 21:15:17 +02:00
Robert Jördens 5b3eac1d96 pipistrello: tweak fifo depths a bit
ise being dull again, inferring all but one 64x64 fifo as bram...
minimum bram depth is 256 anyway
2015-06-22 23:25:07 -06:00
Robert Jördens cd249b2f66 pipistrello: run at 83+1/3 MHz, cleanup CRG 2015-06-22 19:03:00 -06:00
Sebastien Bourdeauducq 9f3f9255a2 soc: increase DDS output FIFO sizes 2015-06-21 08:40:10 -06:00
Sebastien Bourdeauducq 5a9bdb2e33 DDS monitoring 2015-06-19 15:30:17 -06:00
Sebastien Bourdeauducq 03fe71228b dds: phase computation fixes 2015-06-19 11:01:43 -06:00
Sébastien Bourdeauducq 3636025e69 pipistrello: smaller L2 cache 2015-06-18 09:49:52 -06:00
Florent Kermarrec 38a0f63bd2 gateware/soc: use Minicon SDRAM controller and 128KB shared L2 cache 2015-06-18 12:18:03 +02:00
Sebastien Bourdeauducq b2af0f6cc3 soc,runtime: support TTL override 2015-06-09 19:51:02 +08:00
Sebastien Bourdeauducq a2ae5e4706 runtime: report TTL status over UDP 2015-06-03 18:26:19 +08:00
Sebastien Bourdeauducq b81151eb42 soc: rtio monitor 2015-06-02 17:41:40 +08:00
Sebastien Bourdeauducq a36c51eb83 DDS over RTIO (batch mode not supported yet) 2015-05-08 14:44:39 +08:00
Sebastien Bourdeauducq a61d701d47 rtio: decouple PHY reset from logic reset 2015-05-02 11:47:11 +08:00
Sebastien Bourdeauducq 62669f9ff2 soc: factor timer, kernel CPU and mailbox 2015-05-01 18:51:24 +08:00
Sebastien Bourdeauducq 967145f2dc watchdog support on core device (broken by bug similar to issue #19) 2015-04-29 12:58:37 +08:00
Sebastien Bourdeauducq 86c012924e targets: rename AMP->Top, merge peripherals 2015-04-28 00:18:54 +08:00
Sebastien Bourdeauducq 938e1c2842 Remove UP support.
The only advantage of UP is to support the Papilio Pro, but that port is also very limited in other ways and the Pipistrello provides a more reasonable platform that also supports AMP.

On the other hand, RPCs on UP are difficult to implement with the session.c protocol system (without an operating system or coroutines), along with many other minor difficulties and maintainance issues. Planned features such as watchdogs in the core device are also difficult on UP.
2015-04-27 20:43:45 +08:00
Sebastien Bourdeauducq 546996f896 coredevice,runtime: put ref_period into the ddb 2015-04-16 15:15:38 +08:00
Sebastien Bourdeauducq 61a6506484 targets/pipistrello: add mailbox memory region 2015-04-15 20:41:28 +08:00
Robert Jördens f988ec318e pipistrello: fix csrs, make AMP default 2015-04-14 21:10:07 -06:00
Robert Jördens 70916aa0c5 pipistrello: tig _all_ async paths, add timing interference report 2015-04-14 18:18:48 -06:00
Robert Jördens 066adbdeac pipistrello: timing report 2015-04-14 18:18:16 -06:00
Robert Jördens 6217cf5392 pipistrello: basesoc, cleanup 2015-04-14 18:18:16 -06:00
Sebastien Bourdeauducq 4c10182c9f rtio: refactor, use rtlink 2015-04-14 19:44:45 +08:00
Sebastien Bourdeauducq c0f1708c20 targets/pipstrello: fix mem_map 2015-04-14 19:34:14 +08:00
Florent Kermarrec 24b2bd7b6f soc/targets: use mem_map, fix addressing conflict on UP between ethernet and dds 2015-04-11 21:32:11 +08:00
Sebastien Bourdeauducq 44304a33b2 soc,runtime: define RTIO FUD channel number in targets 2015-04-09 00:35:11 +08:00
Sebastien Bourdeauducq 7e591bb1c7 targets: use _Peripherals/UP/AMP class names, share QC1 IO defs 2015-04-07 00:07:53 +08:00