Yann Sionneau
d66117ed99
pxi6733: cleanup
2015-06-08 11:54:39 +02:00
Yann Sionneau
c251601204
pxi6733: refactor, allow multiple channels in one task, cancel any previous task
2015-06-05 20:12:46 +02:00
26e737f61f
style
2015-06-06 00:55:36 +08:00
37c7ea31c3
gui: TTL override support
2015-06-06 00:03:30 +08:00
14cf244c0a
gui: display status of TTL channels
2015-06-05 19:11:41 +08:00
9f9079589e
gui: send monitor requests to core device
2015-06-05 14:52:41 +08:00
a6a476593e
worker: wait for process termination
...
This prevents stray SIGCHLDs from crashing the program e.g. if the asyncio event loop is closed before the process actually terminates.
2015-06-05 00:37:26 +08:00
c843c353d7
worker: remove useless process wait
2015-06-05 00:05:38 +08:00
Yann Sionneau
50a6da994e
worker test: do not close the event loop twice
2015-06-04 13:44:07 +02:00
Yann Sionneau
60bdf74137
tests: use try/finally to close event loop + wait for process to die after killing it
2015-06-04 13:40:13 +02:00
78f9268277
worker: add note about correct use of close()
2015-06-04 11:30:34 +08:00
d73006652b
test/worker: always close even if prepare() raises
2015-06-04 11:22:03 +08:00
82a2beaa32
style fixes
2015-06-04 10:42:37 +08:00
448ba042b5
Merge branch 'master' of github.com:m-labs/artiq
2015-06-04 10:35:52 +08:00
Yann Sionneau
b27254ba80
sync_struct test: test more cases, pep8 fix, remove print
2015-06-03 15:54:50 +02:00
Yann Sionneau
b8bdce5bd1
sync_struct test: don't poll, use Event instead
2015-06-03 15:40:58 +02:00
Yann Sionneau
21d88d8345
tests: use a different event loop for each test
2015-06-03 15:23:34 +02:00
a2ae5e4706
runtime: report TTL status over UDP
2015-06-03 18:26:19 +08:00
Yann Sionneau
e5f16b29fd
sync_struct: fix test case name
2015-06-03 10:46:09 +02:00
Yann Sionneau
c7953da7e1
test: add unittest for sync_struct
2015-06-03 10:43:01 +02:00
Yann Sionneau
140239fee4
pxi6733: allow to set the sampling frequency
2015-06-03 00:34:11 +02:00
59b339462c
Merge branch 'master' of github.com:m-labs/artiq
2015-06-02 17:45:16 +08:00
b81151eb42
soc: rtio monitor
2015-06-02 17:41:40 +08:00
048782e26c
test/scheduler: test flush
2015-05-29 20:16:47 +08:00
6ff2e1a083
test/scheduler: verify that a high priority timed experiment in the future is not run
2015-05-29 19:43:39 +08:00
Yann Sionneau
575dfade38
flash_storage comm: use OK/ERROR replies instead of specific FLASH_WRITE_REPLY
2015-05-29 11:10:40 +02:00
aa242f7c66
scheduler: simplify priority policy
...
Remove overdueness. User must submit calibration experiments with higher priority values for them to take precedence.
2015-05-28 18:24:45 +08:00
b0f8141018
scheduler: cancel flush when run is cancelled
2015-05-28 17:48:33 +08:00
e752e57fa5
scheduler: do not duplicate 'run terminated' information
2015-05-28 17:37:08 +08:00
4a7c6954c3
artiq_run: implement mockups of new scheduler API
2015-05-28 17:24:47 +08:00
737f6d4485
scheduler: support pipeline flush
2015-05-28 17:20:58 +08:00
0b05b54a87
test: add scheduler unittest
2015-05-27 19:25:50 +08:00
Yann Sionneau
4bf7875b87
flash_storage: refactor + unit tests + artiq_coreconfig.py CLI + doc
2015-05-27 18:06:12 +08:00
Yann Sionneau
36cda96df0
pxi6733: add ping method to the driver
2015-05-25 22:16:31 +02:00
f30d671359
test/worker: adapt to priority API
2015-05-24 23:38:05 +08:00
5fb86af3a4
gui: support experiment cancellation
2015-05-24 23:20:52 +08:00
ae4615281f
pyon/store_file: replace previous file atomically
2015-05-24 21:26:15 +08:00
fc449509b8
scheduler: pass priority to experiments
2015-05-24 20:37:47 +08:00
e611e17eeb
gui: experiment submission
2015-05-24 20:24:07 +08:00
a21373841c
scheduler: catch worker exceptions in prepare and analyze stages
2015-05-24 20:23:49 +08:00
d6ced1c780
scheduler: support priorities
2015-05-24 01:09:22 +08:00
2f910921f5
gui: console -> log
2015-05-24 00:38:30 +08:00
d9c25130e3
gui: add explorer widgets
2015-05-23 01:25:33 +08:00
2570444941
gui: add empty explorer and console docks
2015-05-22 23:30:46 +08:00
Yann Sionneau
d78a275655
pxi6733: use a method as DoneEvent callback
2015-05-22 16:08:07 +02:00
ea53ed1af7
gui: switch to Qt
2015-05-22 17:06:31 +08:00
Yann Sionneau
c91cd0ab38
pxi6733: use a writeable and c_contiguous numpy ndarray
2015-05-21 18:05:32 +02:00
785623be26
test/worker: adapt to new scheduler API
2015-05-21 16:41:45 +08:00
a670b9f660
tools/asyncio_wait_or_cancel: wait for cancellation
2015-05-21 16:41:27 +08:00
d8917fd94f
Merge branch 'master' of github.com:m-labs/artiq
2015-05-17 16:11:16 +08:00
b74b8d5826
Scheduling TNG
2015-05-17 16:11:00 +08:00
Yann Sionneau
e9b166b199
artiq_flash.sh: some cleanup
2015-05-14 11:12:03 +02:00
e557d7e2df
Merge branch 'master' of github.com:m-labs/artiq
2015-05-14 00:16:27 +08:00
cbb5027343
gateware/ad9858: use WaitTimer from Migen
2015-05-14 00:16:15 +08:00
a62ae1d8d7
test/transforms: adapt to 'now' save on core device
2015-05-12 23:06:33 +08:00
ce4b5739ed
runtime: reset all DDSes upon startup
2015-05-09 17:12:38 +08:00
1ceb06fb16
dds: use context manager for batches
2015-05-09 14:47:40 +08:00
fdc406f062
transforms/inline: support user-defined context managers
2015-05-09 14:47:08 +08:00
5c08423b29
dds: support batches in driver
2015-05-08 22:17:06 +08:00
55f2fef576
runtime: support DDS batches
2015-05-08 16:51:54 +08:00
53c6339307
runtime: break ttl-specific functions from rtio
2015-05-08 16:20:12 +08:00
a36c51eb83
DDS over RTIO (batch mode not supported yet)
2015-05-08 14:44:39 +08:00
a91bb48ced
gateware: adapt to misoc changes
2015-05-06 18:02:15 +08:00
9072647bdc
ad9858: make read timing configurable, increase read delays
2015-05-05 19:33:34 +08:00
2adf9d91df
recover_underflow -> break_realtime
2015-05-03 20:45:28 +08:00
4048568d8e
support kernel handover with coherent time
2015-05-02 23:41:49 +08:00
cb65b1e322
rtio/phy/ttl_simple: reset sensitivity with RTIO logic
2015-05-02 16:17:31 +08:00
a61d701d47
rtio: decouple PHY reset from logic reset
2015-05-02 11:47:11 +08:00
65b4b7bb12
coredevice: rename rtio to ttl, integrated in+out driver, loopback on the same pin in tests
2015-05-02 10:35:21 +08:00
62669f9ff2
soc: factor timer, kernel CPU and mailbox
2015-05-01 18:51:24 +08:00
1684586ae8
test: add unittest for core device watchdog
2015-05-01 14:02:31 +08:00
109dfab76c
frontend: add artiq_mkfs
2015-04-30 20:03:11 +08:00
8a796a6818
artiq_run/ELFRunner: create a core device object (necessary for runtime exception processing)
2015-04-30 10:16:24 +08:00
Zach Smith
5df446ec4b
artiq_flash.sh: fix Pipistrello flash proxy filename
2015-04-30 09:24:13 +08:00
967145f2dc
watchdog support on core device (broken by bug similar to issue #19 )
2015-04-29 12:58:37 +08:00
9ecbb4c88d
gateware/amp/mailbox: simplify
2015-04-29 12:56:21 +08:00
e5f7fcc339
coredevice/comm_tcp: raise exception on connection closed
2015-04-29 11:18:51 +08:00
283695e8aa
language/core: integrate watchdogs
2015-04-28 23:23:59 +08:00
9b62e7e77b
runtime,coredevice: support session reset for serial
2015-04-28 02:11:58 +08:00
27d94a22de
rtio: expose full_ts_width instead of counter_width parameter
2015-04-28 01:38:11 +08:00
dc14728264
test/full_stack: use Ethernet
2015-04-28 01:33:37 +08:00
8a19766278
runtime,comm_generic: improve and fix list encoding
2015-04-28 01:31:55 +08:00
86c012924e
targets: rename AMP->Top, merge peripherals
2015-04-28 00:18:54 +08:00
938e1c2842
Remove UP support.
...
The only advantage of UP is to support the Papilio Pro, but that port is also very limited in other ways and the Pipistrello provides a more reasonable platform that also supports AMP.
On the other hand, RPCs on UP are difficult to implement with the session.c protocol system (without an operating system or coroutines), along with many other minor difficulties and maintainance issues. Planned features such as watchdogs in the core device are also difficult on UP.
2015-04-27 20:43:45 +08:00
934a6b0495
runtime,coredevice: Ethernet support (buggy)
2015-04-23 23:22:40 +08:00
e4251c7f41
runtime: get lwip to run
2015-04-22 15:01:32 +08:00
18106cc014
comm: refactor to support lwip event model
2015-04-22 01:31:31 +08:00
9f52277245
coredevice/core: set default for ref_period
2015-04-22 01:12:01 +08:00
17f61b8e29
pxi6733: minor fixes
2015-04-21 16:23:09 +08:00
e27844e0f7
test/pxi6733: remove useless checks
2015-04-21 16:10:46 +08:00
Yann Sionneau
69388ccc1a
pxi6733: add driver and controller
2015-04-21 16:09:55 +08:00
Yann Sionneau
e19f8896f0
artiq_rpctool: document numpy availability in RPC call cmd line arguments
2015-04-21 15:57:29 +08:00
301a0e6447
rpctool: import numpy
2015-04-21 15:57:25 +08:00
0c1d256fef
comm_dummy: remove unneeded import
2015-04-19 11:41:20 +08:00
c98e08fe36
fix transforms unittest
2015-04-19 11:40:49 +08:00
0b8d496b62
coefficients: cleanup and refactor some code into CoefficientSource
2015-04-18 21:21:23 -06:00
60baed68b4
wavesynth: get coefficients.py into useable state
...
SplineSource() supports spline interpolating multi-channel tabular data,
cropping it and generating wavesynth compatible segment data from it.
ComposingSplineSource() needs some verification still.
2015-04-18 01:23:15 -06:00
Yann Sionneau
52fe66ee4d
artiq_flash.sh: improve detection of flash proxy location
...
Flash proxy is now searched in ~/.migen /usr/local/share/migen
/usr/share/migen and in the directory specified by "-d" argument
or in artiq/binaries/<board_name>/ if "-d" is not specified.
2015-04-17 00:57:16 +08:00
546996f896
coredevice,runtime: put ref_period into the ddb
2015-04-16 15:15:38 +08:00
71167b8adf
rtio: do not attempt latency compensation in gateware
2015-04-16 13:09:29 +08:00
6215d63491
rtio: do not create spurious CSRs when data_width/address_width is 0
2015-04-16 13:04:19 +08:00
26003781b4
rtio/rtlink: add 'like' methods to clone interfaces
2015-04-16 13:02:39 +08:00
30dffb6644
rtio/phy: add wishbone adapter
2015-04-15 20:39:40 +08:00
ecf6b29279
coredevice/rtio: minor docstring cleanup
2015-04-15 13:53:00 +08:00
c0213c9f69
artiq_flash.sh: add pipistrello
2015-04-14 22:37:08 -06:00
9795e83bfc
pdq2: continue work on coefficients
2015-04-14 18:18:49 -06:00
6a0e97f161
pdq2: refactor program_frame(), cleanup test, stall correctly
...
Once the Sequencer ack's a line, the Parser starts preparing the
next one. This includes jumping through the frame table if necessary.
To stall the Parser while the Sequencer executes the last line of a
frame and to ensure that the frame select lines can be set up and their
sampling is synchronized to a trigger, we add a triggered stall line
at the end of the frame.
When that line is triggered the Parser jumps through the table and starts
parsing the first line of the next frame. We let the duration of this
last stall line be 10 cycles (200ns@50MHz) to be able to distinguish this
sampling of the frame select lines from the triggering of the first line
in the next frame.
frame f
parser n f 0
stb __---________---___
trigger ___----_______----_
ack ____-__________-___
sequencer n-1 n 0
2015-04-14 18:18:16 -06:00
bc1acef355
test/pdq2: don't write vcd
2015-04-14 18:18:16 -06:00
4c10182c9f
rtio: refactor, use rtlink
2015-04-14 19:44:45 +08:00
ff9a7727d2
rtio: add rtlink definition (currently unused)
2015-04-13 22:19:18 +08:00
07b8e1292f
artiq_flash: fix stderr redirections
2015-04-11 23:43:33 +08:00
8a2b8fc634
artiq_flash: do not always assume permission problems
2015-04-11 22:54:17 +08:00
Yann Sionneau
8a3be4eca0
artiq_flash: add support for kc705
2015-04-11 22:38:11 +08:00
88e0aae16d
coredevice: add comm_tcp
2015-04-10 01:22:03 +08:00
f427041ae9
coredevice/comm_serial: minor cleanup
2015-04-10 01:21:47 +08:00
cb2596bd81
coredevice/comm: split protocol to allow reuse for Ethernet
2015-04-10 00:59:35 +08:00
efd1c24ed7
frontend: add artiq_compile tool to build default experiment
2015-04-07 15:41:32 +08:00
ca89b6d0ed
worker_db: support read-only mode
2015-04-07 15:40:57 +08:00
fda4ee1a83
coredevice: add compile method
2015-04-07 15:40:25 +08:00
5e046dc5ce
artiq_run: move parse_arguments and get_experiment to tools
2015-04-07 13:04:47 +08:00
7e591bb1c7
targets: use _Peripherals/UP/AMP class names, share QC1 IO defs
2015-04-07 00:07:53 +08:00
1ed60e0829
gateware/amp: use new ModuleTransformer API
2015-04-06 23:54:53 +08:00
72f9f7ed79
runtime: implement mailbox, use it for kernel startup, exceptions and termination
2015-04-05 22:07:34 +08:00
7ea9250b31
wavesynth: interpolate->coefficients
2015-04-05 04:43:27 -06:00
0bab73eece
wavesynth/compute_samples: fix list mutation bug
2015-04-05 18:41:06 +08:00
9fd4594c53
interpolate: refactor discrete_compensate
2015-04-05 04:32:23 -06:00
75dfa95b4d
wavesynth: move test code to unittests, fix mutability style
2015-04-05 04:24:44 -06:00
3257275782
worker_db: get_logger -> getLogger
2015-04-05 18:02:07 +08:00
1d5f467da7
pdq2: implement changes in trigger/jump semantics, add unittest
...
The unittests now runs the compute_samples.Synthesizer against the actual
gateware and verifies similarity (up to integer rounding errors).
2015-04-05 03:55:54 -06:00
e870b27830
wavesynth: new semantics, fix compensation
...
* "trigger" now means that the corresponding line will only start
once the trigger line is high.
* "jump" is implicit as the last line in a frame must jump back.
* spline coefficients are now compensated for finite time step size
2015-04-05 03:55:54 -06:00
1f545346e3
wavesynth: implement silence, add defaults, fix bias
2015-04-05 03:55:54 -06:00
051b01f58e
wavesynth: refactor testing code
2015-04-05 03:55:54 -06:00
71b7fe38bc
worker_impl: add missing import
2015-04-05 17:50:48 +08:00
9b46bc623a
dbhub: do not use as context manager, turn close exceptions into warnings, do not close devices early in worker
2015-04-05 17:49:41 +08:00
0ec7e9a98c
artiq_run: fix get_argparser()
2015-04-04 21:17:24 -06:00
1a1afd5410
artiq_run: refactor, support use from within experiments
...
You can always (under posix) use #!/usr/bin/env artiq_run as
shebang for experiments and make them executable.
Now, you can also do this (portable):
if __name__ == "__main__":
from artiq.frontend.artiq_run import run
run()
to make an experiment executable. The CLI options are all inherited.
Also:
* removed --elf: can be inferred from filename
* did some refactoring and cleanup
* use logging for all messages, except the result printing (use -v to get
parameter changes and dummy scheduler actions)
2015-04-04 20:51:48 -06:00
43893c6c1d
worker_impl: use DBHub as context manager
2015-04-04 20:51:48 -06:00
7b86138fd2
DBHub: make it a context manager
2015-04-04 20:51:48 -06:00
d1653589f9
pdq2: spelling fix
2015-04-04 14:26:32 -06:00
16ff190731
pdq2: cleanup unittest
2015-04-04 14:26:32 -06:00
833178462d
remove gpio driver
2015-04-04 22:06:54 +08:00
c6d3750076
runtime,amp: set kernel memory start to SDRAM+128K, use custom linker file to split memory
2015-04-03 16:03:38 +08:00
fb91955260
tests: make hardware-in-the loop flags positive logic
...
Explicitly having to disable unittests that require hardware
(ARTIQ_NO_HARDWARE) is cumbersome.
There is not even a sensible default for the
device or serial number of the devices requiring additional
variables (ARTIQ_LDA_DEVICE etc).
This patch reverts the logic by skipping unittests that
can not automatically determine whether the required hardware
is present and where it is.
2015-04-03 11:51:03 +08:00
Florent Kermarrec
2995f0a705
remove use of _r prefix on CSRs
2015-04-02 18:30:44 +08:00
5bd8d414cf
gateware/amp: add kernel CPU and mailbox modules
2015-04-02 16:49:36 +08:00
Yann Sionneau
e7be00baa8
Add support for automatic build and upload of dev conda artiq packages to binstar by travis-ci
...
- SoC+BIOS are also built and integrated in the conda package
- artiq_flash.sh script is embedded to allow flashing ppro board
2015-03-30 19:51:52 +08:00
3108ffeef6
coredevice/comm_serial: use lazy formatting in logging
2015-03-27 18:54:19 +01:00
f4cb97b709
comm_serial: fix baud rate change logging
2015-03-25 17:57:53 -06:00
bd2f6ea9f9
thorlabs_tcube_controller: use simple_network_args
2015-03-25 16:20:08 +01:00
Yann Sionneau
5ca5a3602e
novatech409b: cleanup
2015-03-25 16:11:11 +01:00
03139808bd
[WIP] wavesynth/interpolate: wavesynth programming tools
...
* interpolate(t, v) will generate the channel data subset of a wavesynth
program
* still broken
2015-03-23 20:38:33 -06:00
6a0bc19279
pdq2/driver: document a few units
2015-03-23 20:31:37 -06:00
768fa21488
lda_controller: show default product type
2015-03-23 20:02:36 +01:00
bd145bbabc
use %(default) in argparse
2015-03-23 20:02:14 +01:00
b597483913
thorlabs_tcube: spelling, fix ping
2015-03-23 17:24:12 +01:00
Yann Sionneau
91336f974d
lda_controller: replace serial argument with device one
2015-03-23 17:02:39 +01:00
Yann Sionneau
2651050c83
Controller cleanups
2015-03-23 17:02:39 +01:00
0b174085c8
pdq2/mediator: rewrite, adapt to new PDQ RPC format, support anonymous segments, support uploading to controllers
2015-03-22 22:30:59 +01:00
c18efa11b3
wavesynth: fix frame/segment terminology
2015-03-22 10:56:34 +01:00
1b7f71bda9
controllers: consistent device/simulation specification
2015-03-22 00:48:15 +01:00
7e61f66493
pdq2/mediator: get pdq devices from pdb
2015-03-22 00:24:42 +01:00
8cb77b0336
pdq2: rename url parameter to device and require it
2015-03-21 00:33:50 -06:00
05781699b8
pdq2: driver and unittest
...
* parses wavesynth style programs
* verified with cosimulated gateware
2015-03-21 00:29:00 -06:00
200e20fb39
worker: close devices immediately after run and before analyze
2015-03-20 12:01:34 +01:00
577754c38f
pdq2: fix argparser
2015-03-19 22:26:12 -06:00
222d0a9d37
pdq2_controller: add dump option
2015-03-19 21:38:46 -06:00
5ab3290ed4
pdq2: add refactored client code
2015-03-19 20:34:29 -06:00
fae7246f30
pdq2: merge from main pdq2 repo
2015-03-19 14:34:37 -06:00
2257cfa952
wavesynth/compute_samples/: demonstrate dds clear
2015-03-15 18:13:47 +01:00
40bd101de0
wavesynth/compute_samples/SplinePhase: fix reduction
2015-03-15 18:13:09 +01:00
1d0fde7f13
wavesynth: program decoding
2015-03-15 18:05:03 +01:00
327448977c
wavesynth/compute_samples: use set_coefficients
2015-03-15 16:48:24 +01:00
0d8260af6e
wavesynth: basic sample computation
2015-03-15 16:30:07 +01:00
2b3641ac0a
db,worker: fix realtime result initialization
2015-03-13 15:12:55 +01:00
7a1d60ee15
coredevice,runtime,language: add parameters to runtime exceptions, include information with RTIO errors
2015-03-13 14:55:18 +01:00
84732a469d
coredevice/gpio: fix indentation
2015-03-13 14:31:50 +01:00
3122623c6f
rtio: make 63-bit timestamp counter the default [soc]
2015-03-12 13:13:35 +01:00
f158711f7e
test/worker: test watchdog in build()
2015-03-11 19:07:04 +01:00
43a05c783d
worker: split write_results action
2015-03-11 19:06:46 +01:00
4ba54ac929
test: do not close/recreate the asyncio event loop (WA for asyncio bugs when multiple tests are run)
2015-03-11 19:05:01 +01:00
e037b930d8
test: add worker unittest
2015-03-11 18:26:04 +01:00
5ca4821a29
ctlmgr: use workaround for asyncio.wait_for(process.wait()... Python bug
2015-03-11 16:48:16 +01:00
d5795fd619
master: watchdog support
...
Introduces a watchdog context manager to use in the experiment code that
terminates the process with an error if it times out. The syntax is:
with self.scheduler.watchdog(20*s):
...
Watchdogs timers are implemented by the master process (and the worker
communicates the necessary information about them) so that they can be
enforced even if the worker crashes. They can be nested arbitrarily.
During yields, all watchdog timers for the yielding worker are
suspended [TODO]. Setting up watchdogs is not supported in kernels,
however, a kernel can be called within watchdog contexts (and terminating
the worker will terminate the kernel [TODO]).
It is possible to implement a heartbeat mechanism using a watchdog, e.g.:
for i in range(...):
with self.scheduler.watchdog(...):
....
Crashes/freezes within the iterator or the loop management would not be
detected, but they should be rare enough.
2015-03-11 16:43:14 +01:00
f2134fa4b2
master,worker: split prepare/run/analyze
2015-03-09 23:34:09 +01:00
4c280d5fcc
master: use a new worker process for each experiment
2015-03-09 16:22:41 +01:00
ec1d082730
remove timeout from run_params (to be replaced by a better mechanism)
2015-03-09 10:51:32 +01:00
d95a9cac9a
move realtime result registration into dbh, simplify syntax
2015-03-08 17:27:27 +01:00
f2e3dfb848
Experiment base class, replace __artiq_unit__ with docstring
2015-03-08 15:55:30 +01:00
407477bc5a
test: add ARTIQ_NO_PERIPHERALS environment variable to disable tests requiring non-core devices
2015-03-08 11:40:50 +01:00
0f007cb1a7
language/db: remove implicit_core
2015-03-08 11:37:53 +01:00
ac697e3248
test/thorlabs_tcube: fix default serial port
2015-03-08 11:37:24 +01:00
28bce9ee40
artiqlib -> artiq.gateware
2015-03-08 11:00:24 +01:00
9fad01d967
test/thorlabs_tcube: fix test discovery and style
2015-03-04 23:53:49 +00:00
Yann Sionneau
c2831db253
thorlabs_tcube: add realistic values for status bits and dc status in driver sim
2015-03-04 23:45:22 +00:00
Yann Sionneau
5091098eb0
thorlabs_tcube: driver PEP8 fix
2015-03-04 23:45:21 +00:00
Yann Sionneau
bc19d6f7a8
thorlabs_tcube: add unit tests
2015-03-04 23:45:21 +00:00
Yann Sionneau
5b8691f7f5
thorlabs_tcube: fix driver spelling issues
2015-03-04 23:45:21 +00:00
Yann Sionneau
14c759ff89
add Thorlabs T-Cube NDSP
2015-03-04 14:30:49 +00:00
f307897bec
units: fix strip_unit
2015-02-27 10:43:03 -07:00
0abd41a04a
pc_rpc: trace support in server
2015-02-27 00:17:11 -07:00
3e46a36a4d
lda: do not print attenuation value in simulation
2015-02-27 00:16:56 -07:00
ee9d616733
language/units: add strip_unit function
2015-02-26 23:31:07 -07:00
f855834810
gui/tools/DictSyncer: remove dead code
2015-02-26 22:10:53 -07:00
Yann Sionneau
b672a99174
lda: add support for ping
2015-02-26 09:30:30 -07:00
d51493fb5d
language/core: fix interpreter implementations of time/cycle conversions
2015-02-25 21:15:46 -07:00
Yann Sionneau
1b5944257e
units: add support for V (Volt)
2015-02-24 14:15:38 -07:00
Yann Sionneau
9485372277
units: add support for abs() on Quantity
2015-02-24 14:15:23 -07:00
651ed71b79
master: basic automatic experiment list
2015-02-21 20:34:31 -07:00
4267e0deab
master,artiq_run: simplify unit autodetection
2015-02-21 20:26:58 -07:00
387de11e56
artiq_run: fix import
2015-02-21 20:09:46 -07:00
6601bebcfe
master: make RIDs unique across restarts
2015-02-21 18:41:07 -07:00
ceb02b42cb
master: use full year in result folder name
2015-02-21 18:34:31 -07:00
965dd89b61
master: reorganize result output code
2015-02-21 14:28:18 -07:00
1aec6a0462
master: name results 'year-month-day/hour-minute/runid-experiment'
2015-02-21 13:42:26 -07:00
cc172699ea
master: use RID + unit class name for HDF5 filenames
2015-02-20 14:11:55 -07:00
65555a3a09
artiq_run,master: introduce __artiq_unit__ attribute to mark and name experiments
2015-02-20 14:01:34 -07:00
Yann Sionneau
5cfdac9c7c
Lda: replace assert with direct exception raising
2015-02-20 10:21:15 -07:00
0dd5692c32
master,run: pass run_params to experiment
2015-02-19 20:05:12 -07:00
4d21b78314
master,client,gui: factor timeout into run_params
2015-02-19 20:03:55 -07:00
d01ba8e644
artiq_run: provide dummy scheduler API
2015-02-19 12:09:37 -07:00
c69c4d5ce9
master: expose scheduler API to experiments
2015-02-19 12:09:11 -07:00
9ffc370416
master,run: automatically call analyze function
2015-02-19 09:40:15 -07:00
5bb6a3d8a6
style
2015-02-18 11:34:00 -07:00
de4a15c315
lda: add unit tests
2015-02-18 11:33:25 -07:00
05824fd3be
lda: style
2015-02-18 11:31:44 -07:00
Yann Sionneau
dc132bd248
lda: fixes
2015-02-18 11:23:24 -07:00
Yann Sionneau
3c50610f3d
pyon: bytes support
2015-02-18 11:19:03 -07:00
e10390d142
coredevice: add get_rtio_time
2015-02-18 09:56:30 -07:00
ec84726858
py2llvm: support conversion of fractions to float
2015-02-18 09:56:07 -07:00
d484b3a548
tools: add missing import
2015-02-18 08:52:31 -07:00
3543dc30c7
Revert "tools/file_import: use python 3.4 importlib API"
...
This reverts commit 614a96a3d7
2015-02-18 08:51:44 -07:00
170a626c76
tools/file_import: support import of modules importing from their directory
2015-02-17 16:13:00 -07:00
656099a331
artiq_run: sort result output alphabetically
2015-02-17 16:12:21 -07:00
614a96a3d7
tools/file_import: use python 3.4 importlib API
2015-02-17 13:07:09 -07:00
4558fb3e33
clarify controller terminology
2015-02-16 08:57:15 -07:00
61dc177bce
units: support direct float conversion
2015-02-16 07:48:05 -07:00
021d0d312e
novatech409b: do not specify type info in docstrings
2015-02-16 04:43:30 -07:00
8c4fb2d534
novatech409b: add sim mode help
2015-02-16 04:39:41 -07:00
17611e9899
lda_controller: add description
2015-02-15 17:32:08 -07:00
Joe Britton
a3494c57cc
add Novatech 409B controller
2015-02-15 17:31:37 -07:00
e196ef9c48
lda_controller: style
2015-02-15 15:00:55 -07:00
17596f4ad8
tools,frontend: print default ports
2015-02-15 14:58:57 -07:00
79a5d8a12a
tools,frontend: common network arguments
2015-02-15 14:55:43 -07:00
6d4b9e5fca
frontend: remove lda_client (use artiq_rpctool instead)
2015-02-12 09:34:17 +08:00
Yann Sionneau
af4be9a2e2
rpctool: change call syntax
2015-02-12 09:31:04 +08:00
39dfbb4162
ddb: support for best effort RPC client
2015-02-12 00:54:54 +08:00
1b3603d8bf
pc_rpc/BestEffortClient: add docstrings
2015-02-12 00:50:48 +08:00
Yann Sionneau
b396f5dd43
pc_rpc: support for method listing, frontend: artiq_rpctool, +fixes by SB
2015-02-12 00:38:30 +08:00
6d11da3887
pc_rpc/BestEffortClient: add logging
2015-02-12 00:21:39 +08:00
a7405dea1c
protocols/pc_rpc: add best effort client
2015-02-12 00:14:20 +08:00
c91705c5d1
ctlmgr: support hostnames in DDB
2015-02-09 20:03:34 +08:00
542e047f5a
ctlmgr: clean shutdown
2015-02-08 21:44:49 +08:00
a50c74523f
ctlmgr: split command arguments properly
2015-02-08 12:18:57 +08:00
abb7d9f911
ctlmgr: catch create_subprocess_exec errors and retry
2015-02-08 12:15:22 +08:00
96a01efc48
ctlmgr: wait for processes to terminate before starting new ones
2015-02-08 00:59:08 +08:00
e7d85c5b87
ctlmgr: basic working implementation
2015-02-07 23:52:05 +08:00
aba749093b
ctlmgr: get local bind address, format commands
2015-02-07 01:14:27 +08:00
0d0a05a487
sync_struct/Subscriber: add before_receive_cb, export reader/writer
2015-02-07 01:13:15 +08:00
f9d3bd107e
ctlmgr: retry connection to master, print received ddb
2015-02-06 18:58:54 +08:00
17685d1e98
controller manager skeleton
2015-02-06 12:17:51 +08:00
2f06574381
ddb: controller support
2015-02-05 22:53:31 +08:00
4167e669d2
gui/explib: add to artiq top-level import
2015-02-05 19:50:03 +08:00
8df1b03f0f
artiq_run: add verbosity config
2015-02-04 19:09:54 +08:00
0ba07e67b8
artiq/tools/verbosity_args: add help
2015-02-04 19:09:37 +08:00
0e65f71705
artiq_run: HDF5 output support
2015-02-04 18:46:55 +08:00
af79392918
master: basic dumping of results to HDF5
2015-02-04 18:37:57 +08:00
2f4a83b97a
gui: access to parameter DB from GUI files
2015-02-04 16:13:56 +08:00
1b122dd887
sync_struct,gui: refactor Subscriber data distribution to support access to parameter DB from GUI file
2015-02-04 15:06:25 +08:00
186aa7fdb7
style
2015-02-04 14:44:39 +08:00
Yann Sionneau
fc92a66e51
asyncio: Use ProactorEventLoop on Windows
2015-02-03 22:29:03 +08:00
c259c4f46f
gui/rt_results: display group name in window title
2015-01-31 16:57:50 +08:00
2fbe22e15e
master,client: support changing real-time results group
2015-01-30 20:36:54 +08:00
0ebe56f595
gui/rt_results: support raw view
2015-01-30 19:07:33 +08:00
Yann Sionneau
526887140d
Set WARNING as default log level + update documentation
2015-01-30 19:04:04 +08:00
37feaf1cea
comm_serial: use serial.serial_for_url
2015-01-30 11:47:20 +08:00
45c0e2874f
master/db: exclude Notifier attributes from kernel attr init
2015-01-29 23:48:39 +08:00
c0c0137d9a
transforms/inline: support skipping of attr init
2015-01-29 23:48:03 +08:00
7d6b93d8eb
master/db: fix realtime data lookup
2015-01-29 21:45:24 +08:00
9aa7155502
gui: use experiment registry
2015-01-29 19:59:44 +08:00
e7dac4ab43
master: experiment registry
2015-01-29 19:59:16 +08:00
26b1282b2b
gui/tools/DictSyncer: keep original data
2015-01-29 19:58:25 +08:00
cba0011431
language/db: default to no realtime results
2015-01-29 19:58:00 +08:00
939236a1b5
tools: fix logging config
2015-01-29 18:47:07 +08:00
Yann Sionneau
5ba7218cc1
Factorize argparser for debug level
2015-01-29 10:07:12 +08:00
906099c978
gui/rt_results: do not attempt to plot before receiving data
2015-01-28 16:28:13 +08:00
71c5115c11
gui: handle exit in explorer
2015-01-27 23:51:23 +08:00
db3114f79b
serve GUI and Glade file from master
2015-01-26 23:37:33 +08:00
8904d963d2
gui: add explorer window + rough prototype of control widgets defined with glade
2015-01-26 19:56:15 +08:00
82330b3c2a
gui: save layout
2015-01-23 19:00:09 +08:00
f983fdc985
file_db: support default data if file not present
2015-01-23 18:59:56 +08:00
9fb42e4952
doc: use sphinx-argparse
2015-01-23 00:52:13 +08:00
47aa634ab5
replace periodic schedule with timed schedule
2015-01-23 00:23:00 +08:00
569600b607
frontend/pdq2_client: fix entry point
2015-01-22 10:38:47 +08:00
Yann Sionneau
c8f2f4b245
Add missing __init__.py
2015-01-22 10:37:58 +08:00
0983862c03
pyon/store_file: add newline
2015-01-21 13:52:35 +08:00
56ea62b936
doc: fixes and add sync_struct docstrings
2015-01-19 19:20:14 +08:00
0c2e960c85
frontend: restore artiq_ prefix
2015-01-17 19:41:00 +08:00
3e22fe86b5
reorganize files as per discussion with Robert
2015-01-17 19:38:20 +08:00
6cc3a9d973
frontend/*: move to artiq.frontend, make entry_points
...
* solves the trouble of having to setup PATH and PYTHONPATH in a project
specific way and keep them changing
* works well with virtualenvs
* works under windows where the shebang is meaningless
* works if your python is not named "python3"
* can use "pip3 install --user --editable ."
* creates an egg-link in ~/.local/share/... pointing to $PWD
* generates the scripts and copies them to ~/.local/bin which is likely
already in your $PATH
* analogously under windows
* or call scripts as "python3 -m artiq.frontend.master"
2015-01-17 16:02:43 +08:00
77dab11746
gui/XYWindow: better bounds
2015-01-15 11:22:44 +08:00
