David Nadlinger
b3ef6e2253
doc: Minor typo fix/rewording in drtio.rst
2019-01-12 00:13:24 +00:00
Drew
66861e6708
test_pc_rpc: fix equality bug ( #1188 ) ( #1239 )
...
Fixes bug from 5108ed8#1186 and fixes/amends #1188 .
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-11 10:15:44 +08:00
101671fbbf
core_analyzer: support uniform VCD time intervals
...
close #1236
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-10 19:35:09 +01:00
Drew
58e872e7b5
doc: document artiq_coreanalyzer usage. ( #1233 )
2019-01-10 13:01:36 +08:00
Drew
99a0f61b35
artiq_client: remove custom input validation for built-in argparse ( #1185 )
2019-01-10 12:58:11 +08:00
Drew
721c6f3bcc
pc_rpc: fix handling of type annotations
2019-01-10 12:13:22 +08:00
088530604e
test_ad9910: relax tests
...
* tune_sync_delay: the opposite IO_UPDATE to SYNC_CLK alignment may not be perfectly
mis-aligned
* set_mu_speed: seems to be slower on the buildbot
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-09 17:27:42 +00:00
19748fe495
ad9910: fix RTIO fine timestamp nudging
...
Previously the TSC was truncated to an even coarse RTIO periods before doing
the setting SPI xfer. Afterwards the the IO update pulse would introduce
at least one but less than two RTIO cycles. Ultimately the RTIO TSC was
truncated again to even. If the SPI xfer takes an odd number of RTIO
periods, then a subsequent xfer would collide.
close #1229
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-09 17:22:57 +00:00
b25ab1fc88
ad9910: add more slack in tune_sync_delay
...
close #1235
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-09 16:07:31 +00:00
f8a94725e9
manual: add precision about sequence errors
2019-01-09 18:58:22 +08:00
9b213b17af
sayma_amc: forward RTM UART in Master variant as well
2019-01-09 18:57:57 +08:00
c7b18952b8
sayma_amc: work around Ultrascale LVDS Toutbuf_delay_td_pad
2019-01-09 13:47:08 +08:00
62599c5f91
firmware: use consistent terminology
2019-01-09 13:46:18 +08:00
Drew
b3b0b6f0a5
artiq_influxdb: clarify argparse groups ( #1212 )
...
Make names of argparse group variables relate to what they're doing.
Meets Flake8.
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-09 11:40:55 +08:00
David Nadlinger
101ed5d534
examples: Fix DRTIO destination indices ( #1231 )
...
Using the default routing table, links numbers and destinations
are offset by 1, as destination 0 is local RTIO.
2019-01-09 11:40:15 +08:00
Drew
40370c4d45
Docs: fix build warnings ( #1234 )
...
* ad9910: finish CONT_RECIRCULATE -> CONT_RAMPUP
Found while building docs. Forgot to refactor strings.
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
* spi2: reformat update_xfer_duration_mu docstring
update_xfer_duration_mu docstring threw warning while building docs,
didn't use consistent indent in warning.
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-09 11:39:23 +08:00
David Nadlinger
4fb434674d
coredevice: Fix ad9910 __all__ exports
2019-01-08 18:55:26 +00:00
0d3e7ba805
nix: add zlib in artiq-dev
...
Needed by the Vivado installer.
2019-01-08 20:47:09 +08:00
887cb110a7
firmware: fix default DRTIO routing table
2019-01-08 20:46:53 +08:00
David Nadlinger
cadde970e1
urukul: Expand CPLD sync_sel explanation [nfc]
2019-01-08 02:37:58 +00:00
David Nadlinger
7bcdeb825b
ad9910: Add inverse FTW/ASF conversions
2019-01-08 02:18:14 +00:00
David Nadlinger
4d793d7149
ad9910: Truncate phase word to 16 bits
...
This avoids overflowing into the asf portion of the register.
2019-01-08 02:18:14 +00:00
332bd6090f
satman: wait for CPLL/QPLL lock after setting drtio_transceiver::stable_clkin
2019-01-07 17:09:19 +08:00
3217488824
add Sayma RTM DRTIO target
2019-01-07 00:13:47 +08:00
b5501aaf00
firmware: program I2C switch on Sayma RTM
2019-01-06 14:54:52 +08:00
66b3132c28
sayma_amc: fix RTIO TSC instantiation
2019-01-06 14:54:32 +08:00
6e43c41103
firmware: support building without SDRAM
2019-01-05 23:41:30 +08:00
cf9447ab77
rtio/cri: remove unneeded CSR management
2019-01-05 23:40:45 +08:00
2c3510497b
firmware: fix not(has_spiflash) build
2019-01-05 23:40:03 +08:00
d6fea22174
manual: update firmware/gateware build/flashing instructions. Closes #1223
2019-01-05 12:38:54 +08:00
2100a8b1f1
sayma_amc: more fighting with vivado timing analyzer
2019-01-05 12:25:30 +08:00
Drew
94cdad6c1d
artiq_flash: change docs from old -m arg to -V ( #1224 ) ( #1227 )
...
`-m` argument is deprecated. Changed to newer `-V` argument
Closes #1224
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-05 10:22:12 +08:00
Drew Risinger
b58d59a9e7
pyon: fix grammar in module docstring.
...
Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
2019-01-04 19:31:08 +00:00
Drew
3e5cea5d89
Docs: instructions to check if in plugdev group
2019-01-04 19:30:13 +00:00
a93fdb8c9d
drtio: disable all destinations in gateware at startup
...
Otherwise, kernels fail to get a RTIODestinationUnreachable exception when attempting
to reach a DRTIO destination that has never been up.
2019-01-04 23:42:12 +08:00
62d7c89c48
sayma_amc: use high-resolution TTL on SMAs ( #792 )
2019-01-03 20:50:38 +08:00
0972d61e81
ttl_serdes_ultrascale: use GTH clock domains
2019-01-03 20:50:04 +08:00
f007895fad
drtio/gth_ultrascale: fix rtiox clock domain
2019-01-03 20:49:38 +08:00
10ebf63c47
jesd204_tools: get the Vivado timing analyzer to behave
2019-01-03 20:22:35 +08:00
d6a3172a3e
update copyright year
2019-01-03 20:21:34 +08:00
4af8fd6a0d
ttl_serdes_ultrascale: fix Input
2019-01-03 20:14:54 +08:00
175f8b8ccc
drtio/gth_ultrascale: generate multiplied RTIO clock from BUFG_GT ( #792 )
2019-01-03 20:14:18 +08:00
77126ce5b3
kasli: use hwrev 1.1 by default for DRTIO examples
2019-01-02 23:04:20 +08:00
ab9ca0ee0a
kasli: use 150MHz for DRTIO by default (Sayma compatibility)
2019-01-02 23:03:57 +08:00
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
f5cda3689e
sayma_amc: enable DRTIO on master SATA connector for MasterDAC variant
2019-01-02 16:46:16 +08:00
e85df13127
nix: update docs
2019-01-02 16:34:29 +08:00
ec52a1003d
nix: add jesd204b
2019-01-02 16:34:11 +08:00
d42d607547
nix: add microscope
2019-01-02 16:13:08 +08:00
7a6bdcb041
nix: fix m-labs URLs
2019-01-02 16:04:25 +08:00
