mirror of
https://github.com/m-labs/artiq.git
synced 2024-12-24 19:04:02 +08:00
`-m` argument is deprecated. Changed to newer `-V` argument Closes #1224 Signed-off-by: Drew Risinger <drewrisinger@users.noreply.github.com>
This commit is contained in:
parent
b58d59a9e7
commit
94cdad6c1d
@ -147,7 +147,7 @@ Then, you can flash the board:
|
||||
|
||||
* For the KC705 board (selecting the appropriate hardware peripheral)::
|
||||
|
||||
$ artiq_flash -t kc705 -m [nist_clock/nist_qc2]
|
||||
$ artiq_flash -t kc705 -V [nist_clock/nist_qc2]
|
||||
|
||||
The SW13 switches also need to be set to 00001.
|
||||
|
||||
@ -164,10 +164,10 @@ This should be done after either installation method (conda or source).
|
||||
|
||||
.. _flash-mac-ip-addr:
|
||||
|
||||
* Set the MAC and IP address in the :ref:`core device configuration flash storage <core-device-flash-storage>` (see above for the ``-t`` and ``-m`` options to ``artiq_flash`` that may be required): ::
|
||||
* Set the MAC and IP address in the :ref:`core device configuration flash storage <core-device-flash-storage>` (see above for the ``-t`` and ``-V`` options to ``artiq_flash`` that may be required): ::
|
||||
|
||||
$ artiq_mkfs flash_storage.img -s mac xx:xx:xx:xx:xx:xx -s ip xx.xx.xx.xx
|
||||
$ artiq_flash -t [board] -m [adapter] -f flash_storage.img storage start
|
||||
$ artiq_flash -t [board] -V [adapter] -f flash_storage.img storage start
|
||||
|
||||
* (optional) Flash the idle kernel
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user