occheung
cb247f235f
gateware: pass adr_w/data_w to submodules
2021-11-08 16:59:08 +08:00
occheung
d84ad0095b
comm_cpu: select 64b bus if not kasli v1.x
2021-11-08 16:59:08 +08:00
Harry Ho
0aa8a739aa
sayma_rtm: fix RTM firmware not in little-endian for RISC-V
2021-10-25 11:20:26 +08:00
Spaqin
1894f0f626
gateware: share RTIOClockMultiplier and fix_serdes_timing_path ( #1760 )
2021-10-07 08:19:38 +08:00
occheung
1b516b16e2
targets: default to vexriscv cpu
2021-09-10 13:25:12 +08:00
Astro
002a71dd8d
build_soc: rename identifier_str to gateware_identifier_str
2020-09-02 00:00:57 +08:00
Astro
45ae6202c0
build_soc: add identifier_str override option
...
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
2020-08-31 11:48:58 +08:00
Sebastien Bourdeauducq
901be75ba4
sayma_rtm: fix Si5324 reset
...
Closes #1483
2020-07-11 09:51:01 +08:00
Sebastien Bourdeauducq
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
Sebastien Bourdeauducq
6c948c7726
sayma: RF switch control is active-low on Basemod, invert
2020-01-16 08:59:52 +08:00
Sebastien Bourdeauducq
b7f1623197
sayma_rtm: connect attenuator shift registers in series
2019-12-20 18:58:31 +08:00
Sebastien Bourdeauducq
1c9cbe6285
sayma_rtm: add basemod attenuators on RTIO
2019-12-20 15:25:55 +08:00
Sebastien Bourdeauducq
6ee15fbcae
sayma_rtm: basemod RF switches
2019-12-18 10:33:29 +08:00
Sebastien Bourdeauducq
150a02117c
sayma_rtm: drive clk_src_ext_sel
2019-12-09 19:47:50 +08:00
Sebastien Bourdeauducq
2b5213b013
wrpll: constrain clocks
2019-12-09 12:26:44 +08:00
Sebastien Bourdeauducq
46a776d06e
sayma: introduce WRPLL on RTM
2019-12-08 15:30:00 +08:00
Sebastien Bourdeauducq
883310d83e
sayma_rtm: si5324 -> cdrclkc
2019-12-08 14:26:05 +08:00
Sebastien Bourdeauducq
57a5bea43a
sayma_rtm: support setting RTIO frequency
2019-12-08 11:45:31 +08:00
Sebastien Bourdeauducq
4df2c5d1fb
sayma: prepare for SYSREF align
...
We will try DDMTD on the AMC first, as this is simpler and perhaps will work on v2 after the power supply fixes.
2019-10-08 12:30:47 +08:00
Sebastien Bourdeauducq
f8e4cc37d0
sayma_rtm: reset and detect DACs
2019-10-06 20:15:27 +08:00
Sebastien Bourdeauducq
7cd02d30b7
sayma_rtm_drtio: replace sayma_rtm
2019-10-06 17:59:53 +08:00
Sebastien Bourdeauducq
a8cf4c2b18
sayma_rtm: hwrev v2.0 by default
2019-10-06 13:25:30 +08:00
Sebastien Bourdeauducq
5d31cf2268
sayma_rtm2: si5324_clkout -> cdr_clk_clean
2019-03-23 13:48:36 +08:00
Sebastien Bourdeauducq
c7205ad82f
sayma_rtm: preliminary v2 support
2019-03-23 12:37:03 +08:00
Sebastien Bourdeauducq
ea431b6982
sayma_rtm: use 150MHz RTIO freq for DDMTD
2019-01-31 20:43:44 +08:00
Sebastien Bourdeauducq
ec230d6560
sayma: move SYSREF DDMTD to the RTM
...
Put RTM Si5324 into bypass mode before running.
Needs rework to cut RTM Si5324 reset trace.
Needs rework to fix LVDS termination on RTM R310/R313 and R314/R315.
Needs uFL jumper cables between RTM "REF LO DIAG" and "CRD AUX CLKIN" (sic).
2019-01-31 20:39:33 +08:00
Sebastien Bourdeauducq
88fb9ce4d6
sayma_rtm: add hmc7043_gpo monitoring
2018-07-11 19:04:29 +08:00
Sebastien Bourdeauducq
29e5c95afa
sayma_rtm: minor cleanup
2018-07-11 19:02:59 +08:00
Sebastien Bourdeauducq
7f05e0c121
sayma_rtm: remove UART loopback
...
RTM power supply issues are fixed now, plus this will get in the way of satman support.
2018-07-11 19:00:18 +08:00
Sebastien Bourdeauducq
6f3ed81626
targets/sayma_rtm: fix description
2018-06-18 17:46:53 +08:00
Robert Jördens
1029ac870b
sayma_rtm: don't drive txen pins
...
pins disabled by config
necessary for using that pin as DIN (#813 )
2018-06-13 16:11:30 +00:00
Sebastien Bourdeauducq
68d16fc292
serwb: support single-ended signals
...
Low-speed PHY only.
2018-06-13 21:28:21 +08:00
Robert Jördens
a9a25f2605
sayma_rtm: drive ref_lo_clk_sel, and set clk muxes early
2018-06-12 20:00:12 +02:00
Florent Kermarrec
89797d08ed
serwb: revert to 125MHz linerate (until we understand why 1gbps version breaks between builds)
2018-06-07 15:13:56 +02:00
Florent Kermarrec
009db5eda9
serwb: revert 1gbps linerate
2018-06-06 16:20:20 +02:00
Sebastien Bourdeauducq
af88c4c93e
clean up hmc7043 reset
2018-06-05 20:41:48 +08:00
Thomas Harty
ac5c4913ec
Sayma RTM: hold hmc7043 in reset/mute state during init.
2018-06-05 19:22:04 +08:00
Florent Kermarrec
bca2969957
sayma_rtm: add RTMScratch module to test remote Wishbone accesses
2018-05-24 16:53:10 +02:00
Florent Kermarrec
f8a9dd930b
serwb/genphy: add device parameter (not used here, but this way all the phys share the same parameters), scrambling is also now always enabled.
2018-05-15 23:51:14 +02:00
Florent Kermarrec
c18a73d45f
sayma_amc/rtm: use new serwb low-speed phy
2018-05-15 16:40:50 +02:00
Florent Kermarrec
05955bfd79
sayma_rtm: use bufio for sys4x (needed since we are using a -1 speedgrade)
2018-05-01 22:16:35 +02:00
Florent Kermarrec
84e1f05559
sayma_rtm: make cd_sys4x clock domain reset_less
2018-05-01 16:11:26 +02:00
Robert Jördens
5d3c76fd50
sayma_rtm: use bitstream opts in migen
2018-04-27 15:43:32 +00:00
Florent Kermarrec
439d2bf2bc
sayma/serwb: adapt, full reset of rtm on link reset
2018-04-17 19:24:03 +02:00
Florent Kermarrec
1acd7ea1db
sayma/serwb: re-enable scrambling
2018-04-17 00:49:36 +02:00
Florent Kermarrec
ca01c8f1cb
sayma: reduce serwb linerate to 500Mbps
2018-04-16 23:19:15 +02:00
Florent Kermarrec
bb90fb7d59
sayma/serwb: remove scrambling (does not seems to work on sayma for now...)
2018-04-07 15:57:57 +02:00
Florent Kermarrec
e15f8aa903
sayma/serwb: enable scrambling
2018-04-07 14:52:37 +02:00
Florent Kermarrec
2f8bd022f7
sayma_rtm: remove sys0p2x clock
2018-04-07 03:10:34 +02:00
Florent Kermarrec
73b727cade
serwb: new version using only sys/sys4x clocks domains, scrambling deactivated.
2018-04-07 02:59:14 +02:00