David Nadlinger
1c71ae636a
examples: Add edge counters to kasli_tester variant
...
This enables test_edge_counter on the CI system.
2019-01-15 10:55:07 +00:00
4cb9f77fd8
sayma_amc: fix Master timing constraints
2019-01-13 13:53:07 +08:00
9b213b17af
sayma_amc: forward RTM UART in Master variant as well
2019-01-09 18:57:57 +08:00
c7b18952b8
sayma_amc: work around Ultrascale LVDS Toutbuf_delay_td_pad
2019-01-09 13:47:08 +08:00
3217488824
add Sayma RTM DRTIO target
2019-01-07 00:13:47 +08:00
66b3132c28
sayma_amc: fix RTIO TSC instantiation
2019-01-06 14:54:32 +08:00
2100a8b1f1
sayma_amc: more fighting with vivado timing analyzer
2019-01-05 12:25:30 +08:00
62d7c89c48
sayma_amc: use high-resolution TTL on SMAs ( #792 )
2019-01-03 20:50:38 +08:00
175f8b8ccc
drtio/gth_ultrascale: generate multiplied RTIO clock from BUFG_GT ( #792 )
2019-01-03 20:14:18 +08:00
77126ce5b3
kasli: use hwrev 1.1 by default for DRTIO examples
2019-01-02 23:04:20 +08:00
ab9ca0ee0a
kasli: use 150MHz for DRTIO by default (Sayma compatibility)
2019-01-02 23:03:57 +08:00
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
f5cda3689e
sayma_amc: enable DRTIO on master SATA connector for MasterDAC variant
2019-01-02 16:46:16 +08:00
53e79f553f
Merge branch 'master' into new
2018-11-19 11:54:50 +08:00
78d4b3a7da
gateware/targets: expose variant lists
...
This allows writing scripts that build all variants.
2018-11-17 22:10:20 +08:00
c990b5e4f1
Merge remote-tracking branch 'origin/master' into new
2018-11-08 20:21:56 +08:00
ad0254c17b
Merge branch 'switching125' into new
2018-11-07 22:03:18 +08:00
efd735a6ab
Revert "drtio: monitor RTIOClockMultiplier PLL ( #1155 )"
...
This reverts commit 469a66db61
2018-11-07 22:01:03 +08:00
ba4bf6e59b
kasli: don't pass rtio pll feedback through bufg
...
UG472: "The MMCM performance increases because the
feedback clock is not subjected to noise on the core supply since it
never passes through a block powered by this supply."
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 11:58:55 +00:00
b6e4961b0f
kasli: lower RTIO clock jitter
...
* high bandwidth since the si5324 is good
* no low power ibufgds
* drop bufg between ibufgds and pll
* increase pll vco frequency to 1.5 GHz
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 11:43:19 +00:00
e17e458c58
ptb2: add sync to urukul0 for ad9910 usage
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-06 10:06:51 +00:00
31f68ddf6c
Merge branch 'urukul-sync'
...
* urukul-sync: (29 commits)
urukul: flake8 [nfc]
ad9910: flake8 [nfc]
urukul/ad9910 test: remove unused import
test_urukul: relax speed
urukul,ad9910: print speed metrics
kasli: add PTB2 (external clock and SYNC)
kasli: add sync to LUH, HUB, Opticlock
kasli_tester: urukul0 mmcx clock defunct
test_ad9910: relax ifc mode read
tests: add Urukul-AD9910 HITL unittests including SYNC
ad9910: add init bit explanation
test: add Urukul CPLD HITL tests
ad9910: fiducial timestamp for tracking phase mode
ad9910: add phase modes
ad9910: fix pll timeout loop
tester: add urukul sync
ptb: back out urukul-sync
ad9910: add IO_UPDATE alignment and tuning
urukul: set up sync_in generator
ad9910: add io_update alignment measurement
...
close #1143
2018-11-05 19:54:30 +01:00
32d538f72b
kasli: add PTB2 (external clock and SYNC)
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:16 +01:00
d8a5951a13
kasli: add sync to LUH, HUB, Opticlock
...
for #1143 , also add missing LUH device db
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:37:14 +01:00
4269d5ad5c
tester: add urukul sync
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:52 +01:00
60d3bc63a7
ptb: back out urukul-sync
...
... for backwards compatibility.
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:50 +01:00
0433e8f4fe
urukul: add sync_in generator
...
for #1143
Signed-off-by: Robert Jördens <rj@quartiq.de>
2018-11-05 19:36:30 +01:00
bc4a8157c0
kasli: add tsinghua2
2018-11-01 18:26:37 +08:00
6357a50d33
kasli: update nudt variant
2018-10-15 18:04:57 +08:00
469a66db61
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-10-08 14:50:02 +02:00
86fe6b0594
kasli: add NUDT variant
2018-10-04 23:20:09 +08:00
a89bd6b684
kasli: swap Urukul EEMs for Tester
...
Updated to Urukul 1.3.
2018-10-04 23:19:31 +08:00
9f96b6bcda
kasli: use 125MHz DRTIO freq for testing
2018-10-04 10:41:01 +08:00
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
d0ee2c2955
opticlock: external 100 MHz
2018-09-28 19:05:18 +02:00
3b3fddb5a4
kasli: add mitll2
2018-09-27 23:21:52 +08:00
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
212892d92f
style
2018-09-26 10:13:33 +08:00
73f0de7c79
sayma: DRTIO master fixes
2018-09-20 11:15:45 +08:00
cd61ee858c
kasli: fix satellite TSC instantiation
2018-09-15 14:06:54 +08:00
420e1cb1d0
cri: fix firmware routing table access
2018-09-12 18:08:16 +08:00
7ec45efdcf
kasli: add missing cri_con to Satellite
2018-09-10 20:16:09 +08:00
7ae44f3417
firmware: add routing table (WIP)
2018-09-09 21:49:28 +08:00
496d1b08fd
kasli: enable routing in Master
2018-09-09 21:48:12 +08:00
ec302747e0
kasli: add DRTIO repeaters
2018-09-09 16:27:39 +08:00
87e0384e97
drtio: separate aux controller
...
This helps with managing CSR groups and heterogeneous (satellite/repeaters) DRTIO cores.
2018-09-05 17:56:58 +08:00
1450e17a73
sayma: adapt to TSC and DRTIOSatellite changes
2018-09-05 12:10:41 +08:00
19ae9ac1b1
kc705: adapt to TSC changes
2018-09-05 12:07:28 +08:00
3d531cc923
kasli: adapt to TSC and DRTIOSatellite changes
2018-09-05 12:06:47 +08:00
47eb37e212
VLBAI{Master,Slave}: align rtio channels with PTB
2018-09-04 10:39:45 +00:00
