Commit Graph

49 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq b10d3ee4b4 make RTIO clock switch optional and simplify
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
Sebastien Bourdeauducq 7986391422 manual: update Kasli section 2018-02-21 12:04:14 +08:00
Sebastien Bourdeauducq 6c4681e7d2 manual: fix minor errors 2018-02-21 11:57:57 +08:00
Robert Jördens 21cd24fe80 manual: add section on Kasli/opticlock 2018-01-15 15:13:24 +01:00
Robert Jördens 94b84ebe7c kc705_dds: add urukul spi/ttl channels 2018-01-02 13:20:48 +01:00
Sebastien Bourdeauducq 569484f888 remove phaser, adapt SAWG example to Sayma 2017-12-14 18:49:27 +08:00
Sebastien Bourdeauducq b89929565c manual: fix formatting problem 2017-11-25 14:46:31 +08:00
Sebastien Bourdeauducq 33d339947c doc: add information on how to connect Zotino 2017-11-01 20:20:42 +08:00
Sebastien Bourdeauducq d80cf8d59d kc705: add TTLs and shift register driver for FMC DIO 2017-10-31 23:14:39 +08:00
Sebastien Bourdeauducq 5803ac9998 gateware: add Zotino SPI to NIST CLOCK target 2017-10-23 15:04:30 +08:00
Robert Jördens 43d551f1d8 README_PHASER: integrate into board port docs
* rewrite setup commands for usage of artiq-dev metapackage
* integrate with rest of installation documentation
* move contents of README_PHASER to core_device.rst
* closes #815
2017-08-29 16:15:51 +02:00
Robert Jördens 94ee48860a doc: fix phaser channel number statement
closes #781
2017-07-15 20:24:50 +02:00
mntng 40ca951750 kc705: add SPI bus for memory card
This will be useful for SPI unit tests using a SD card as victim.
2017-07-12 00:27:44 +08:00
Sebastien Bourdeauducq 9ab63920e0 Remove Pipistrello support
Closes #658
Closes #381
2017-05-15 17:17:44 +08:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
2016-11-21 17:29:39 +01:00
Sebastien Bourdeauducq 93c310dfa5 pipistrello: add some inputs 2016-11-21 23:43:41 +08:00
whitequark 6aa5d9f6c6 Remove last vestiges of nist_qc1. 2016-11-21 15:36:22 +00:00
whitequark 5e8888d5f3 Fully drop AD9858 and kc705-nist_qc1 support (closes #576). 2016-11-21 15:14:17 +00:00
Robert Jördens 18d18b6685 phaser: add sync ttl input for monitoring 2016-10-10 17:13:23 +02:00
Robert Jördens 4d87f0e9e0 phaser: instantiate jesd204b core, wire up 2016-10-06 14:44:22 +02:00
Robert Jördens c54b6e2f3c phaser: add README 2016-10-05 19:24:34 +02:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq 4ef5eb2644 doc: move VADJ, closes #554 2016-09-09 18:40:58 +08:00
Sebastien Bourdeauducq 2912515e5c doc: add warning about pipistrello current draw 2016-06-11 10:26:35 -06:00
Sebastien Bourdeauducq ca9724f517 doc: add core device comms details 2016-06-11 10:01:15 -06:00
Sebastien Bourdeauducq e8aadd0a1a doc: document common KC705 problems. Closes #450 2016-06-03 23:20:38 -04:00
dhslichter 141edb521a qc2: swap SPI/TTL, all TTL lines are now In+Out compatible 2016-05-19 10:42:03 +08:00
dhslichter f395a630e0 Updated qc2 pinouts for SPI and 2x DDS bus, update docs 2016-04-13 18:38:34 +08:00
Sebastien Bourdeauducq 05317a9259 manual: QC2 FMC voltage 2016-03-31 10:47:16 +08:00
Sebastien Bourdeauducq 878ab9a39b manual: document DDS and SPI RTIO channels 2016-03-10 22:38:49 +08:00
Sebastien Bourdeauducq f0b0b1bac7 support for multiple DDS buses (untested) 2016-03-09 17:12:50 +08:00
Robert Jördens f33baf339f pipistrello: drop ttls on pmod, add leds back in 2016-03-08 23:34:51 +01:00
Robert Jördens f39208c95a pipistrello: try with fewer leds/pmod ttl 2016-03-08 22:10:47 +01:00
Robert Jördens 104d641c59 pipistrello: move the spi channel like kc705 2016-03-08 13:30:05 +01:00
Robert Jördens 40c1cde2e2 doc: kc705.clock: add spi bus mappings (closes #321) 2016-03-08 13:28:32 +01:00
Robert Jördens 9898cb14db doc: add pipistrello spi bus 2016-03-08 13:18:55 +01:00
Robert Jördens e23e91f8ac doc: add pipistrello pmod ttl channels 2016-03-08 13:13:33 +01:00
Sebastien Bourdeauducq 2770d9c729 doc: I2C/QC2 2016-03-05 19:02:03 +08:00
Robert Jördens 2cc1dfaee3 kc705: move ttl channels together again, update doc 2016-03-01 19:40:32 +01:00
Sebastien Bourdeauducq 5fad570f5e targets/kc705-nist_clock: add clock generator on LA32 for testing purposes 2016-03-01 00:35:26 +08:00
Robert Jördens 0151ac55ff ppp: update documentation 2016-01-25 12:29:05 -07:00
Sebastien Bourdeauducq fa1afb7dd8 add information about CLOCK hardware 2016-01-20 21:06:02 -05:00
Sebastien Bourdeauducq 179c50480f frontend: split coretool into coreconfig, corelog and coreanalyzer 2015-12-24 18:51:11 +08:00
whitequark 9fc7a42036 pipistrello: expose LED{1..4} as RTIO channels. 2015-11-23 18:26:45 +08:00
Sebastien Bourdeauducq ef487ee8b0 doc: more updates for dataset API 2015-10-13 18:45:04 +08:00
Sebastien Bourdeauducq d4f42e33e6 doc: clarify hw support 2015-08-21 13:33:23 +08:00
Sebastien Bourdeauducq 178816243c doc/core_device: update, add KC705 QC1 TTL table 2015-08-18 16:04:27 +08:00
Sebastien Bourdeauducq 16af80ca3e doc: add core device explanation 2015-08-08 22:59:53 +08:00
Sebastien Bourdeauducq c0030406c3 doc: core device page 2015-08-08 21:24:13 +08:00