architeuthidae
5326719542
1124 Carrier Kasli 2.0 update
2024-10-23 03:46:18 +08:00
mwojcik
3480a1a6d0
4410: fix SUServo DIP switch configuration
2024-08-06 18:53:07 +08:00
occheung
f3858552b6
2245: remove absolute maximum specs
...
Closes #50
2022-09-05 11:55:31 +08:00
occheung
ebc1235847
1124: add insn for clock configuation setup
2022-08-11 10:48:50 +08:00
occheung
4b9822c07e
1124: init
2022-08-09 17:31:27 +08:00
occheung
d387006656
2118-2128: (max. -> min.) sustained event separation
2022-07-27 15:17:32 +08:00
occheung
69696899ac
2118-2128: tabulate MSES
2022-07-27 15:16:09 +08:00
occheung
8ce5cca85e
2118-2128: update code line range
2022-07-27 15:15:26 +08:00
occheung
d6d29c89a1
ttl_in/MTD: fix time.sleep duration
2022-07-27 15:14:42 +08:00
occheung
a7dfa03a21
ttl_in/MTD: import time
2022-07-27 15:14:12 +08:00
occheung
440b3ef3df
2118-2128: add t_min info from #26
2022-07-26 18:26:52 +08:00
occheung
7d993a4800
2238: remove min input edge rate
...
Updates #48 .
2022-07-26 13:11:23 +08:00
occheung
77d31568b1
5108: specify noise in RMS
...
Updates #52 .
2022-07-26 13:10:06 +08:00
occheung
df564d2375
5108: remove gain condition for terminated voltage spec
2022-07-25 17:29:26 +08:00
occheung
b8e89f4d01
4410/linearity: expected -> ideal
2022-07-25 17:01:03 +08:00
occheung
8138e793d7
7210: cite waveform plot
2022-07-25 16:33:42 +08:00
occheung
a14aa89a76
7210: fix specs
...
Replaced plot with the one produced by a faster scope (20 GSa/s).
2022-07-25 16:25:26 +08:00
occheung
5d8dc38db7
7210: clarify on clock in/out format
2022-07-25 14:56:20 +08:00
occheung
688f5fdf23
7210: add phaser clock input to application
...
Closes #42 .
2022-07-25 14:30:45 +08:00
occheung
3a6ed63f0a
2118-2128: add RTIO constraint
2022-07-22 17:46:35 +08:00
occheung
c1388a53a8
4410: remove dead titles
2022-06-24 11:31:39 +08:00
occheung
af0fca61e2
4410: replot voltage measured vs expected
2022-06-24 11:29:40 +08:00
occheung
6d9faa7bb9
4410: add asf vs v_rms
2022-06-23 16:58:16 +08:00
occheung
42cbd9e195
7210: init
2022-06-22 14:53:31 +08:00
occheung
2838213457
fix language
2022-06-17 16:12:27 +08:00
occheung
2d0a866274
2238: add spec on max voltage with term
...
Updates #35 .
Same termination structure as bnc/sma-ttl card.
Technically the max allowable voltage with termination is a bit higher than 5V.
But it seems that it will still exceed the termination resistor rating limit at 5.5V.
The only method of acquiring V_ds & other parameters is by eye-balling the I-V curve of the MOSFET, which is not precise.
So the calculation assumes V_ds=0, just to be conservative.
2022-06-17 16:07:21 +08:00
occheung
2964e13102
2118-2128: separate term rating to another spec
2022-06-17 16:06:26 +08:00
occheung
1cf6919ec8
add missing plot in b476c178
2022-06-17 13:34:56 +08:00
occheung
5c44a65d33
5568: init
...
There aren't any electrical specs, as suggested by the lack of electronic components.
There is a colored version of the connection diagram, but I think the B&W one actually looks better.
2022-06-16 16:02:47 +08:00
occheung
c1c078671b
examples: move SPI examples to spi.py
2022-06-16 16:00:22 +08:00
occheung
9920661516
2245: add dio_spi examples
2022-06-13 17:27:32 +08:00
occheung
8ff606888c
2118-2128: add BNC-TTL front panels
2022-06-09 16:54:00 +08:00
occheung
8c2c9ecfe4
5108: mention possible SMA breakout option
...
Updates #13
2022-06-09 11:51:44 +08:00
occheung
11ee1ebcbd
5518-5528: init
2022-06-08 17:22:55 +08:00
occheung
b86eea7611
4410-4412: remove mention of external sync signal distribution
...
Updates #38
2022-06-08 17:21:27 +08:00
occheung
ac639b9d1e
2118-2128: add TTLClockGen example
2022-06-07 16:01:18 +08:00
occheung
9bd1412d9c
2118-2128: Add comment to make coarse RTIO cycle clear
2022-06-07 14:36:21 +08:00
occheung
2a5066ac5f
2118-2128: add <8ns short pulse example
2022-06-07 13:49:14 +08:00
occheung
f5ce9e19e9
4410-4412: add eem mode docs
2022-06-07 12:46:23 +08:00
occheung
fa0de2a72d
5108: add 'ADC' to title
2022-02-14 17:36:05 +08:00
occheung
2a9d7f4f9c
4456: clarify setup for the tests
2022-02-14 11:02:07 +08:00
occheung
75f3a328db
4456: dds -> pll
2022-02-14 10:38:28 +08:00
occheung
b476c178d0
2118-2128: add min pulse width spec
...
Especially test reuslt that validate the "minimum 3ns pulse width" claim.
2022-02-08 13:33:55 +08:00
occheung
3ed6a7ccbe
2118-2128: fix data rate spec
...
Quoted from the isolator datasheet: "Data rates up to 150 Mbps are supported."
Saying the maximum data rate is at least 150 Mbps is not very accurate.
Updates #36
2022-02-07 14:41:09 +08:00
occheung
d622423675
4456: remove mention to cpld cfg on rf_sw
...
As communication to ALmazny mezzanine does not use bitbang anymore, there is very little value for routing LVDS signal.
Also, MUXOUT readout from ADF5356 has an easily understandable API available.
So there should not be any reasons to use EEM[4:8] for anything other than controlling RF switches.
2022-02-07 14:28:07 +08:00
occheung
2ca8632582
4456: update attenuator API
2022-02-07 14:26:58 +08:00
occheung
6199e4bb5e
4456: fix quotation mark
2022-02-04 17:23:05 +08:00
occheung
1d7e6dc853
4456: init
...
Updates #17
2022-02-04 17:18:15 +08:00
occheung
d4387cae18
5108: fix d157dda
...
Made the spectrometer thing more stright forward. It really just monitors the laser power in that use case.
2022-02-04 14:59:30 +08:00
occheung
1b8beee45d
2118-2128: add max data rate spec
...
Base on the isolator datasheet, where it stated that "Data rates up to 150 Mbps are supported".
The electrical specific of the datasheet stated the spec differently.
Updates #36
2022-02-04 14:38:39 +08:00
architeuthidae
mwojcik
occheung