5518-5528: init
parent
b86eea7611
commit
11ee1ebcbd
|
|
@ -0,0 +1,384 @@
|
|||
\documentclass[10pt]{datasheet}
|
||||
\usepackage{palatino}
|
||||
\usepackage{textgreek}
|
||||
\usepackage{minted}
|
||||
\usepackage{tcolorbox}
|
||||
\usepackage{etoolbox}
|
||||
|
||||
\usepackage[justification=centering]{caption}
|
||||
|
||||
\usepackage[utf8]{inputenc}
|
||||
\usepackage[english]{babel}
|
||||
\usepackage[english]{isodate}
|
||||
|
||||
\usepackage{graphicx}
|
||||
\usepackage{subfig}
|
||||
|
||||
\usepackage{tikz}
|
||||
\usepackage{pgfplots}
|
||||
\usepackage{circuitikz}
|
||||
\usepackage{pifont}
|
||||
\usetikzlibrary{calc}
|
||||
\usetikzlibrary{fit,backgrounds}
|
||||
|
||||
\title{5518 BNC-IDC / 5528 SMA-IDC}
|
||||
\author{M-Labs Limited}
|
||||
\date{January 2022}
|
||||
\revision{Revision 1}
|
||||
\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
|
||||
|
||||
\begin{document}
|
||||
\maketitle
|
||||
|
||||
\section{Features}
|
||||
|
||||
\begin{itemize}
|
||||
\item{8 channels.}
|
||||
\item{Internal IDC connector.}
|
||||
\item{External BNC or SMA connectors.}
|
||||
\end{itemize}
|
||||
|
||||
\section{Applications}
|
||||
|
||||
\begin{itemize}
|
||||
\item{Breaks out analog signals.}
|
||||
\item{BNC or SMA adapters for: \begin{itemize}
|
||||
\item{5432 DAC Zotino}
|
||||
\item{5632 DAC Fastino}
|
||||
\end{itemize}}
|
||||
\item{(5528 only) SMA adapter for 5108 Sampler.}
|
||||
\item{Convert from/to HD68 with 5568 HD68-IDC.}
|
||||
\end{itemize}
|
||||
|
||||
\section{General Description}
|
||||
The 5518 BNC-IDC card is a 8hp EEM module, while the 5528 SMA-IDC card is a 4hp EEM module.
|
||||
Both adapter cards breaks out analog signal from IDC connectors to BNC (5518) or SMA (5528).
|
||||
IDC connectors can be found on 5108 Sampler, 5432 DAC Zotino, 5632 DAC Fastino \& 5568 HD68-IDC.
|
||||
|
||||
Each card provides 8 channels, with BNC (5518) or SMA (5528) connectors.
|
||||
Breaking out all 32 channels from 5432 DAC Zotino, 5632 DAC Fastino or 5568 HD68-IDC requires 4 BNC/SMA-IDC cards.
|
||||
Only 1 BNC/SMA-IDC is required to break out all 8 ADC channels from a 5108 Sampler.
|
||||
|
||||
% Switch to next column
|
||||
\vfill\break
|
||||
|
||||
\newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}}
|
||||
\newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}}
|
||||
\newcommand{\repeatfootnote}[1]{\textsuperscript{\ref{#1}}}
|
||||
\newcommand{\inputcolorboxminted}[2]{%
|
||||
\begin{tcolorbox}[colback=white]
|
||||
\inputminted[#1, gobble=4]{python}{#2}
|
||||
\end{tcolorbox}
|
||||
}
|
||||
|
||||
\begin{figure}[h]
|
||||
\centering
|
||||
\scalebox{0.95}{
|
||||
\begin{circuitikz}[european, scale=1.2, every label/.append style={align=center}]
|
||||
|
||||
\begin{scope}[]
|
||||
|
||||
% Node to pin-point the locations of IO symbols
|
||||
\draw[color=white, text=black] (-0.1, 2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io0) {};
|
||||
\draw[color=white, text=black] (-0.1, 1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io1) {};
|
||||
\draw[color=white, text=black] (-0.1, 1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io2) {};
|
||||
\draw[color=white, text=black] (-0.1, 0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io3) {};
|
||||
\draw[color=white, text=black] (-0.1, -0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io4) {};
|
||||
\draw[color=white, text=black] (-0.1, -1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io5) {};
|
||||
\draw[color=white, text=black] (-0.1, -1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io6) {};
|
||||
\draw[color=white, text=black] (-0.1, -2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io7) {};
|
||||
|
||||
% Labels for all IO symbols
|
||||
\node [label=left:\tiny{IO 0}] at (0.25, 2.45) {};
|
||||
\node [label=left:\tiny{IO 1}] at (0.25, 1.75) {};
|
||||
\node [label=left:\tiny{IO 2}] at (0.25, 1.05) {};
|
||||
\node [label=left:\tiny{IO 3}] at (0.25, 0.35) {};
|
||||
\node [label=left:\tiny{IO 4}] at (0.25, -0.35) {};
|
||||
\node [label=left:\tiny{IO 5}] at (0.25, -1.05) {};
|
||||
\node [label=left:\tiny{IO 6}] at (0.25, -1.75) {};
|
||||
\node [label=left:\tiny{IO 7}] at (0.25, -2.45) {};
|
||||
|
||||
% draw all IO symbols
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=35cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=25cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=15cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=5cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=-5cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=-15cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=-25cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
\begin{scope}[scale=0.07 , rotate=-90, xshift=-35cm, yshift=2cm]
|
||||
\draw (0,0.65) -- (0,3);
|
||||
\clip (-1.5,0) rectangle (1.5,1.5);
|
||||
\draw (0,0) circle(1.5);
|
||||
\clip (-0.8,0) rectangle (0.8,0.8);
|
||||
\draw (0,0) circle(0.8);
|
||||
\end{scope}
|
||||
|
||||
% Draw CH0, CH1 & CH7 CM chokes
|
||||
\draw (3, 1.2) node[twoportshape, t=\MymyLabel{Common Mode}{Line Filter}, circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm0) {};
|
||||
\draw (3, 0.4) node[twoportshape, t=\MymyLabel{Common Mode}{Line Filter}, circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm1) {};
|
||||
\draw (3, -1.1) node[twoportshape, t=\MymyLabel{Common Mode}{Line Filter}, circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm7) {};
|
||||
|
||||
% Omission dots for other channels
|
||||
\node at (3, -0.15)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (3, -0.35)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (3, -0.55)[circle,fill,inner sep=0.7pt]{};
|
||||
|
||||
% IDC26 connector
|
||||
\draw (5.13, 0) node[twoportshape, t={IDC Port}, circuitikz/bipoles/twoport/width=3.8, scale=0.7, rotate=-90] (idc) {};
|
||||
|
||||
% Connect IO connectors to CM chokes
|
||||
\draw [latexslim-latexslim] (io0.east) -- (1.3, 2.45) -- (1.3, 1.2) -- (cm0.west);
|
||||
\draw [latexslim-latexslim] (io1.east) -- (1.2, 1.75) -- (1.2, 0.4) -- (cm1.west);
|
||||
\draw [latexslim-latexslim] (io2.east) -- (1.1, 1.05) -- (1.1, -0.15) -- (2.5, -0.15);
|
||||
\draw [latexslim-latexslim] (io3.east) -- (1.0, 0.35) -- (1.0, -0.25) -- (2.5, -0.25);
|
||||
\draw [latexslim-latexslim] (io4.east) -- (1.0, -0.35) -- (1.0, -0.35) -- (2.5, -0.35);
|
||||
\draw [latexslim-latexslim] (io5.east) -- (1.1, -1.05) -- (1.1, -0.45) -- (2.5, -0.45);
|
||||
\draw [latexslim-latexslim] (io6.east) -- (1.2, -1.75) -- (1.2, -0.55) -- (2.5, -0.55);
|
||||
\draw [latexslim-latexslim] (io7.east) -- (1.3, -2.45) -- (1.3, -1.1) -- (cm7.west);
|
||||
|
||||
% Connect CM chokes to the IDC connector
|
||||
\draw [latexslim-latexslim] (cm0.east) -- (4.85, 1.2);
|
||||
\draw [latexslim-latexslim] (cm1.east) -- (4.85, 0.4);
|
||||
\draw [latexslim-latexslim] (3.5, -0.15) -- ++(1.35, 0);
|
||||
\draw [latexslim-latexslim] (3.5, -0.25) -- ++(1.35, 0);
|
||||
\draw [latexslim-latexslim] (3.5, -0.35) -- ++(1.35, 0);
|
||||
\draw [latexslim-latexslim] (3.5, -0.45) -- ++(1.35, 0);
|
||||
\draw [latexslim-latexslim] (3.5, -0.55) -- ++(1.35, 0);
|
||||
\draw [latexslim-latexslim] (cm7.east) -- (4.85, -1.1);
|
||||
|
||||
\end{scope}
|
||||
|
||||
\end{circuitikz}
|
||||
}
|
||||
|
||||
\caption{Simplified Block Diagram}
|
||||
\end{figure}
|
||||
|
||||
\begin{figure}[hbt!]
|
||||
\centering
|
||||
\subfloat[\centering BNC-IDC]{{
|
||||
\includegraphics[height=2.5in]{BNC_IDC_FP.jpg}
|
||||
\includegraphics[height=2.5in]{photo5518.jpg}
|
||||
}}%
|
||||
\subfloat[\centering SMA-IDC]{{
|
||||
\quad
|
||||
\includegraphics[height=2.5in]{SMA_IDC_FP.pdf}
|
||||
\quad
|
||||
}}%
|
||||
\caption{BNC-IDC/SMA-IDC Card photos}%
|
||||
\label{fig:example}%
|
||||
\end{figure}
|
||||
|
||||
% For wide tables, a single column layout is better. It can be switched
|
||||
% page-by-page.
|
||||
\onecolumn
|
||||
|
||||
\section{Electrical Specifications}
|
||||
|
||||
Specifications of parameters are based on the datasheet of the
|
||||
common mode line filter\footnote{\label{cm_choke}https://www.we-online.com/catalog/datasheet/744229.pdf}.
|
||||
\begin{table}[h]
|
||||
\centering
|
||||
\begin{threeparttable}
|
||||
\caption{Electrical Specifications}
|
||||
\begin{tabularx}{0.65\textwidth}{l | c | c | c | X}
|
||||
\thickhline
|
||||
\textbf{Parameter} & \textbf{Symbol} & \textbf{Max. Value} & \textbf{Unit} & \textbf{Conditions} \\
|
||||
\hline
|
||||
Rated voltage & $V_{R}$ & 80 & V & \\
|
||||
\hline
|
||||
Rated current & $I_{R}$ & 400 & mA & $\Delta T^{*}=40K$ \\
|
||||
\thickhline
|
||||
\end{tabularx}
|
||||
*$\Delta T$ refers to the temperature of the CM line filter minus the ambient.
|
||||
\end{threeparttable}
|
||||
\end{table}
|
||||
|
||||
Impedance characteristics of common mode \& differential mode signal at different frequencies are shown in the following graph.
|
||||
|
||||
\begin{figure}[H]
|
||||
\centering
|
||||
\includegraphics[]{idc_cm_choke.pdf}
|
||||
\caption{Common Mode Line Filter Impedance Characteristics}
|
||||
\end{figure}
|
||||
|
||||
\newpage
|
||||
|
||||
\section{Channel Mapping}
|
||||
The following table shows the corresponding channel number of the BNC/SMA-IDC adapter IO ports, when it is connected to Sinara cards that support IDC connections.
|
||||
\begin{table}[h]
|
||||
\caption{Channel Mapping of BNC/SMA-IDC to Zotino, Fastino \& HD68-IDC}
|
||||
\centering
|
||||
\begin{tabular}{|c|c|c|c|c|c|c|c|c|}
|
||||
\hline
|
||||
IDC Port Label & \multicolumn{1}{l|}{IO 0} & \multicolumn{1}{l|}{IO 1} & \multicolumn{1}{l|}{IO 2} & \multicolumn{1}{l|}{IO 3} & \multicolumn{1}{l|}{IO 4} & \multicolumn{1}{l|}{IO 5} & \multicolumn{1}{l|}{IO 6} & \multicolumn{1}{l|}{IO 7} \\ \hline
|
||||
CH 0-7 & 0 & 1 & 2 & 3 & 4 & 5 & 6 & 7 \\ \hline
|
||||
CH 8-15 & 8 & 9 & 10 & 11 & 12 & 13 & 14 & 15 \\ \hline
|
||||
CH 16-23 & 16 & 17 & 18 & 19 & 20 & 21 & 22 & 23 \\ \hline
|
||||
CH 24-31 & 24 & 25 & 26 & 27 & 28 & 29 & 30 & 31 \\ \hline
|
||||
\end{tabular}
|
||||
\end{table}
|
||||
|
||||
\begin{table}[h]
|
||||
\caption{Channel Mapping of BNC/SMA-IDC to 5108 Sampler}
|
||||
\centering
|
||||
\begin{tabular}{|l|l|l|l|l|l|l|l|l|}
|
||||
\hline
|
||||
& IO 0 & IO 1 & IO 2 & IO 3 & IO 4 & IO 5 & IO 6 & IO 7 \\ \hline
|
||||
Sampler Ch. & \multicolumn{1}{c|}{7} & \multicolumn{1}{c|}{6} & \multicolumn{1}{c|}{5} & \multicolumn{1}{c|}{4} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{2} & \multicolumn{1}{c|}{1} & \multicolumn{1}{c|}{0} \\ \hline
|
||||
\end{tabular}
|
||||
\end{table}
|
||||
|
||||
\section{Front Panel Drawings}
|
||||
|
||||
\begin{multicols}{2}
|
||||
|
||||
\begin{center}
|
||||
\centering
|
||||
\includegraphics[height=2.7in]{bnc_idc_drawings.pdf}
|
||||
\captionof{figure}{5518 BNC-IDC front panel drawings}
|
||||
\end{center}
|
||||
|
||||
\begin{center}
|
||||
\captionof{table}{Bill of Material (5518 Standalone)}
|
||||
\tiny
|
||||
\begin{tabular}{|c|c|c|c|}
|
||||
\hline
|
||||
Index & Part No. & Qty & Description \\ \hline
|
||||
1 & 90506946 & 1 & FP-FRONT PANEL, EXTRUDED, TYPE 2, STATIC, 3Ux8HP \\ \hline
|
||||
2 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline
|
||||
3 & 3020716 & 0.04 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline
|
||||
\end{tabular}
|
||||
\end{center}
|
||||
|
||||
\columnbreak
|
||||
|
||||
\begin{center}
|
||||
\centering
|
||||
\includegraphics[height=2.7in]{bnc_idc_assembly.pdf}
|
||||
\captionof{figure}{5518 BNC-IDC front panel assembly}
|
||||
\end{center}
|
||||
|
||||
\begin{center}
|
||||
\captionof{table}{Bill of Material (5518 Assembled)}
|
||||
\tiny
|
||||
\begin{tabular}{|c|c|c|c|}
|
||||
\hline
|
||||
Index & Part No. & Qty & Description \\ \hline
|
||||
1 & 90506946 & 1 & FP-LYKJ 3U8HP PANEL \\ \hline
|
||||
2 & 3033098 & 0.04 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline
|
||||
3 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline
|
||||
4 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline
|
||||
5 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline
|
||||
6 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI (100EA) \\ \hline
|
||||
7 & 3040005 & 1 & HANDLE 8HP GREY PLASTIC \\ \hline
|
||||
8 & 3207076 & 0.01 & SCR M2.5*16 PAN 100 21101-222 \\ \hline
|
||||
9 & 3201130 & 0.01 & NUT M2.5 HEX ST NI KIT (100PCS) \\ \hline
|
||||
10 & 3211232 & 1 & SCR M2.5*14 PAN PHL SS \\ \hline
|
||||
11 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline
|
||||
\end{tabular}
|
||||
\end{center}
|
||||
\end{multicols}
|
||||
|
||||
\begin{multicols}{2}
|
||||
|
||||
\begin{center}
|
||||
\centering
|
||||
\includegraphics[height=3in]{sma_idc_drawings.pdf}
|
||||
\captionof{figure}{5528 SMA-IDC front panel drawings}
|
||||
\end{center}
|
||||
|
||||
\begin{center}
|
||||
\captionof{table}{Bill of Material (5528 Standalone)}
|
||||
\tiny
|
||||
\begin{tabular}{|c|c|c|c|}
|
||||
\hline
|
||||
Index & Part No. & Qty & Description \\ \hline
|
||||
1 & 90506946 & 1 & FRONT PANEL 3U 4HP PIU TYPE2 \\ \hline
|
||||
2 & 3020716 & 0.02 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline
|
||||
3 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline
|
||||
\end{tabular}
|
||||
\end{center}
|
||||
|
||||
\columnbreak
|
||||
|
||||
\begin{center}
|
||||
\centering
|
||||
\includegraphics[height=3in]{sma_idc_assembly.pdf}
|
||||
\captionof{figure}{5528 SMA-IDC front panel assembly}
|
||||
\end{center}
|
||||
|
||||
\begin{center}
|
||||
\captionof{table}{Bill of Material (5528 Assembled)}
|
||||
\tiny
|
||||
\begin{tabular}{|c|c|c|c|}
|
||||
\hline
|
||||
Index & Part No. & Qty & Description \\ \hline
|
||||
1 & 90506949 & 1 & FP-LYKJ 3U4HP PANEL \\ \hline
|
||||
2 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline
|
||||
3 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline
|
||||
4 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline
|
||||
5 & 3040012 & 1 & HANDLE 4HP GREY PLASTIC \\ \hline
|
||||
6 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline
|
||||
7 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI (100EA) \\ \hline
|
||||
8 & 3207075 & 0.01 & SCR M2.5*12 PAN 100 21101-221 \\ \hline
|
||||
9 & 3033098 & 0.02 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline
|
||||
\end{tabular}
|
||||
\end{center}
|
||||
\end{multicols}
|
||||
|
||||
\section{Ordering Information}
|
||||
To order, please visit \url{https://m-labs.hk} and select the 5518 BNC-IDC/5528 SMA-IDC in the ARTIQ Sinara crate configuration tool.
|
||||
The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}.
|
||||
|
||||
\section*{}
|
||||
\vspace*{\fill}
|
||||
|
||||
\begin{footnotesize}
|
||||
Information furnished by M-Labs Limited is provided in good faith in the hope that it will be useful. However, no responsibility is assumed by M-Labs Limited for its use. Specifications may be subject to change without notice.
|
||||
\end{footnotesize}
|
||||
|
||||
\end{document}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 60 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 80 KiB |
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue