Sebastien Bourdeauducq
eebff6d77f
jesd204sync: fix max_phase_deviation
2019-01-28 18:38:18 +08:00
Sebastien Bourdeauducq
b9e3fab49c
jesd204sync: improve messaging
2019-01-28 18:37:46 +08:00
Sebastien Bourdeauducq
145f08f3fe
jesd204sync: update SYSREF S/H limit deviation tolerance
...
Follows the increased DDMTD resolution.
2019-01-28 18:21:31 +08:00
Sebastien Bourdeauducq
ba21dc8498
jesd204sync: improve messaging
2019-01-28 18:08:20 +08:00
Sebastien Bourdeauducq
3acee87df2
firmware: improve DDMTD resolution using dithering/averaging
2019-01-28 16:04:04 +08:00
Sebastien Bourdeauducq
cfe66549ff
jesd204sync: cleanup DDMTD averaging code
2019-01-28 14:14:50 +08:00
Sebastien Bourdeauducq
2b0d63db23
hmc830_7043: support 125MHz RTIO
2019-01-28 13:44:08 +08:00
Sebastien Bourdeauducq
bdd4e52a53
ad9154: support 125MHz RTIO
2019-01-28 13:43:52 +08:00
Sebastien Bourdeauducq
47312e55d3
sayma: set RTIO_FREQUENCY in MasterDAC
2019-01-28 13:43:28 +08:00
Sebastien Bourdeauducq
443d6d8688
sayma_amc: pass RTIO clock frequency to SiPhaser
2019-01-28 09:49:03 +08:00
Sebastien Bourdeauducq
3b6f47886e
firmware: print more info on DDMTD stability error
2019-01-27 23:06:11 +08:00
Sebastien Bourdeauducq
74fdd04622
firmware: test DDMTD stability
2019-01-27 20:39:12 +08:00
Sebastien Bourdeauducq
81b0046f98
ddmtd: add deglitchers
2019-01-27 20:38:41 +08:00
Sebastien Bourdeauducq
8254560577
sayma: properly determine SYSREF coarse calibration target
2019-01-27 16:00:36 +08:00
Sebastien Bourdeauducq
214394e3b0
sayma: reimplement DAC SYSREF autocalibration
2019-01-27 15:28:39 +08:00
Sebastien Bourdeauducq
fdbf1cc2b2
sayma: rework DAC SYSREF margin validation
...
Previous code did not work when delay range was not enough for two rotations.
This removes autocalibration, to be done later. Uses hardcoded value for now.
2019-01-27 14:17:54 +08:00
Sebastien Bourdeauducq
7e5c062c2c
firmware: bypass channel divider for HMC7043 DCLK
2019-01-27 11:49:34 +08:00
Sebastien Bourdeauducq
f73ffe44f9
firmware: implement DDMTD-based SYSREF/RTIO alignment (draft)
...
Mostly works and usually gets the DAC synchronized at 2.4GHz with Urukul across DRTIO.
Needs cleanup and optimization/characterization.
2019-01-27 09:51:24 +08:00
Sebastien Bourdeauducq
8632b553d2
ddmtd: use IOB register to sample input
2019-01-27 09:50:02 +08:00
Sebastien Bourdeauducq
d1ef036948
kasli_sawgmaster: initialize SAWG phase according to RTIO TSC
2019-01-27 09:49:31 +08:00
Sebastien Bourdeauducq
9966e789fc
sayma: simplify Ultrascale LVDS T false path
...
Recommended by Xilinx.
2019-01-25 23:40:48 +08:00
Sebastien Bourdeauducq
359fb1f207
sayma: fix DDMTD STA
2019-01-25 23:39:19 +08:00
Sebastien Bourdeauducq
cb04230f86
sayma: SYSREF setup/hold validation demonstration
...
This also removes the standalone target as the ISERDES used
for setup/hold check requires the fine RTIO clock, which in turn
requires a DRTIO transceiver due to the Ultrascale TPWS bug.
2019-01-25 16:58:58 +08:00
Sebastien Bourdeauducq
3356717316
sayma: DDMTD SYSREF measurement demonstration
2019-01-25 16:00:31 +08:00
Sebastien Bourdeauducq
4941fb3300
sayma: 2.4GHz DAC clocking (4X interpolation)
...
* gets another clock divider out of the way
* gets one cycle within range of the HMC7043 analog delay alone
* SYSREF/RTIO alignment removed, to be replaced with DDMTD-based scheme
2019-01-25 13:47:04 +08:00
Sebastien Bourdeauducq
cc9420d2c8
hmc7043: fix divider programming
2019-01-25 11:48:50 +08:00
Robert Jördens
8c5a502591
ad53xx: ignore F3 (reserved)
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-24 15:50:46 +01:00
Sebastien Bourdeauducq
bbac92442f
sayma: check hmc7043 slip period
2019-01-24 20:13:43 +08:00
Sebastien Bourdeauducq
a92cc91dcb
kasli_sawgmaster: correctly tune DDS and SAWG
2019-01-24 19:37:14 +08:00
Sebastien Bourdeauducq
f8b39b0b9a
sayma: enable 2X DAC interpolation
...
Seems to work just fine and gets one clock divider out of the way.
2019-01-24 18:28:01 +08:00
Sebastien Bourdeauducq
07b5b0d36d
kasli: adapt Master target to new hardware
2019-01-24 18:27:15 +08:00
Sebastien Bourdeauducq
31592fc8e4
nix: install flash proxy bitstreams with OpenOCD
2019-01-24 16:47:37 +08:00
Sebastien Bourdeauducq
0a0e8c3c93
nix: bump migen/misoc
2019-01-24 16:20:02 +08:00
Sebastien Bourdeauducq
3917a0ef46
nix: support reusing dev environment in build scripts
2019-01-23 21:59:39 +08:00
Sebastien Bourdeauducq
154269b77a
kasli: fix HUST satellite Urukul
2019-01-23 17:59:43 +08:00
Sebastien Bourdeauducq
3b5fd3ac11
kasli_tester: fix grabber test
2019-01-23 17:59:25 +08:00
Sebastien Bourdeauducq
330c5610e9
ad9912: fix imports
2019-01-23 17:59:08 +08:00
Sebastien Bourdeauducq
390f05f762
firmware: use smoltcp release
2019-01-23 16:15:05 +08:00
Sebastien Bourdeauducq
d7e6f104d2
kasli: add HUST variants
2019-01-23 14:11:51 +08:00
Sebastien Bourdeauducq
81f2b2c864
kasli: remove unpopulated Tester EEMs
...
* matches hardware and avoids issues with programs that process the DDB (e.g. kasli_tester)
* shortens compilation times
2019-01-23 12:14:44 +08:00
Sebastien Bourdeauducq
01f1df7e50
nix: fix version strings in artiq-dev environment
2019-01-23 11:21:09 +08:00
Robert Jördens
b692981c8e
ad9910: add note about red front panel led
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-22 12:49:42 +01:00
Sebastien Bourdeauducq
a0eba5b09b
satman: support Grabber
2019-01-22 19:36:13 +08:00
Sebastien Bourdeauducq
2e3555de85
firmware: fix compilation error with more than 1 Grabber
2019-01-22 19:35:46 +08:00
Sebastien Bourdeauducq
9ee5fea88d
kasli: support optional SATA port for DRTIO
2019-01-22 18:06:48 +08:00
Robert Jördens
91e375ce6a
ad9910: don't reset the input divide-by-two
...
suspected of causing weird PLL lock timout errors
https://freenode.irclog.whitequark.org/m-labs/2019-01-22#1548148750-1548143221 ;
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-01-22 09:37:20 +00:00
Sebastien Bourdeauducq
2174935231
nix: update package descriptions
2019-01-22 15:06:42 +08:00
Robert Jördens
81ff3d4b29
ad9912: add some slack after init
2019-01-21 17:10:58 +00:00
Sebastien Bourdeauducq
4869636a55
nix: remove broken version strings
2019-01-21 23:55:25 +08:00
Sebastien Bourdeauducq
79ffd1e0bf
nix: enable pythonparser and artiq unittests
2019-01-21 23:42:10 +08:00
