f5f662200b
fir: streamline, optimize DSP extraction, left-align inputs
2016-12-20 21:39:51 +01:00
cfb66117af
fir: size hint for pre-adder
2016-12-20 17:58:06 +01:00
f310274e39
fir: cleanup halfgen4
2016-12-20 17:58:06 +01:00
whitequark
5f3033b518
firmware: remove max_level_debug.
...
Tracing to the core log isn't particularly slow, and is handy
when debugging.
2016-12-19 13:24:29 +00:00
whitequark
739da9f1b3
runtime: print trace level log messages to UART during startup.
...
There's no way to retrieve them otherwise if the startup kernel
hangs.
This commit was mistakenly removed in 88ad054
2016-12-19 13:21:21 +00:00
whitequark
b9588ddf03
firmware: don't crash on artiq_compile'd kernels ( fixes #641 ).
2016-12-19 13:01:18 +00:00
68b2373b9a
korad_ka3005p: fix simulation mode
2016-12-19 09:49:44 +01:00
161025e7df
korad_ka3005p: use ProactorEventLoop on windows
2016-12-19 09:33:20 +01:00
d55f2bda86
korad_ka3005p: cleanup
2016-12-19 09:32:21 +01:00
jboulder
baac555f96
add device for Korad KA3005P programmable DC power supply
2016-12-19 09:31:21 +01:00
db5957a7e7
firmware: use bsp crate in ad9154
2016-12-17 11:43:29 +08:00
9a564e07c0
firmware: make libbsp a crate
2016-12-16 21:28:25 +08:00
c99388f80f
firmware: use M-Labs as author in Cargo.toml files
2016-12-16 20:14:11 +08:00
9967dfc5ca
runtime: reorganize to support DRTIO satellite firmware
2016-12-16 19:11:19 +08:00
6b998581cc
rtio: use same reset for counter_rtio whatever the interface delay is
2016-12-15 09:28:13 +08:00
15b48be6e4
test/sawg: adapt to new latency spec
2016-12-14 19:43:30 +01:00
115ea67860
fir: automatically use transposed topology
2016-12-14 19:16:07 +01:00
a451b675c9
Revert "fir: different adder layout"
...
This reverts commit 6f50e77b409c293c1905f28e69d79403a0803866.
2016-12-14 19:16:07 +01:00
93076b8efa
fir: different adder layout
2016-12-14 19:16:07 +01:00
61abd994e9
Revert "fir: force dsp48"
...
This reverts commit 0ad433832d1b6dcd803ffa086ae73b2ee0568326.
2016-12-14 19:16:07 +01:00
641d109786
fir: force dsp48
2016-12-14 19:16:07 +01:00
8381db279f
sawg: wire up all HBF outputs, latency compensation in phys, simplify
2016-12-14 19:16:07 +01:00
6cdb96c5e0
rtio: add support for latency compensation in phy
...
* if multiple RTIO channels influence the same data stream and physical
output channel (see SAWG) differential latency needs to be compensated
* this is a NOP for phys with zero delay (default)
* if delay==1, it adds one timestamp-wide register
* if delay >1, it adds one adder and one register
* latency compensation using (~10-50 deep) delay lines is about as
expensive as a single adder+register but very tedious to implement
2016-12-14 19:16:07 +01:00
7be27d7116
fir: add upsample transfer function test
2016-12-14 19:16:07 +01:00
4c27029be0
sawg: fix limit regs
2016-12-14 19:16:07 +01:00
708c25b83a
phaser: don't init rtio in startup_kernel
2016-12-14 19:16:07 +01:00
e9592105ce
drtio: fix aux controller clock domain mistakes
2016-12-14 10:16:45 +08:00
527757b471
kc705_drtio: use ad9154_fmc_ebz
2016-12-13 14:30:26 +08:00
3b5abae935
drtio: fix clock domain conflict
2016-12-13 14:19:49 +08:00
03d13d3811
phaser: dma/drtio changes
2016-12-12 17:46:36 +01:00
c63fa46430
Merge branch 'phaser2'
...
* phaser2: (157 commits)
sawg/hbf: tweak pipeline for timing
fir: register multiplier output
conda/phaser: build-depend on numpy
sawg: reduce coefficient width
sawg: fix latency
test/fir: needs mpl. don't run by default
test/sawg: patch spline
sawg: use ParallelHBFCascade to AA [WIP]
fir: add ParallelHBFCascade
fir: add ParallelFIR and test
gateware/dsp: add FIR and test
README_PHASER: update
sawg: documentation
sawg: extract spline
sawg: document
sawg: demo_2tone
sawg: round to int64
gateware/phaser -> gateware/ad9154_fmc_ebz
phaser: fix typo
sawg: merge set/set64
...
2016-12-12 17:31:39 +01:00
4b61020b27
drtio: reset more local state
2016-12-12 18:48:10 +08:00
d99e64effd
drtio: clear any stale FIFO space reply
2016-12-12 18:02:56 +08:00
4c59c0fecf
Revert "drtio: order resets wrt writes"
...
This reverts commit 9a048c2b3a
2016-12-12 17:49:07 +08:00
6a60afcba0
runtime: clear all DRTIO FIFOs first, reset remote PHYs on link init
2016-12-12 17:48:25 +08:00
8f747fa209
drtio: clear underflow and sequence error on reset
2016-12-12 17:39:14 +08:00
7196bc21c1
rtio: simplify error reset logic
...
Channel is always selected when reset is issued.
2016-12-12 17:35:10 +08:00
1c74249638
runtime: reset local DRTIO state
2016-12-12 17:30:41 +08:00
9a048c2b3a
drtio: order resets wrt writes
2016-12-12 17:18:07 +08:00
ac792ec52b
RELEASE_NOTES: 2.1
2016-12-12 13:12:18 +08:00
cbc49ea91d
set asyncio loop earlier in controllers ( #627 )
2016-12-12 11:38:02 +08:00
3743633b04
Revert "pc_rpc: use ProactorEventLoop on Windows ( #627 )"
...
This reverts commit 7d4297b9bb
2016-12-12 11:33:56 +08:00
09fb4869f3
runtime: centralize (D)RTIO management
2016-12-09 19:24:00 +08:00
0a9f69a3ed
kc705_drtio_master: add missing rtio_core CSRs
2016-12-09 19:23:36 +08:00
4422b6902a
runtime: silence unused variable warnings
2016-12-09 19:23:06 +08:00
bc36bda94a
perform RTIO init on comms CPU side
2016-12-09 14:16:55 +08:00
5accb7a0ac
manual: add missing quote
2016-12-09 14:16:32 +08:00
f6071a5812
sawg/hbf: tweak pipeline for timing
2016-12-08 17:00:53 +01:00
b7a308d33d
fir: register multiplier output
2016-12-08 17:00:39 +01:00
ca636ef28a
conda/phaser: build-depend on numpy
2016-12-08 16:23:40 +01:00
