pca006132
eb28d7be3a
firmware/rpc: fixed typo
2020-07-16 15:15:47 +08:00
pca006132
f78d673079
firmware/rpc: added `#[repr(C)]` for structs.
...
Previously the structs are in repr(Rust) which has no layout guarantee.
2020-07-16 15:11:17 +08:00
Robert Jördens
e31ee1f0b3
firmware/i2c: rewrite I2C implementation
...
* Never drive SDL or SDA high. They are specified to be open
collector/drain and pulled up by resistive pullups. Driving
high fails miserably in a multi-master topology (e.g. with
a USB I2C interface). It would only ever be implemented to
speed up the bus actively but that's tricky and completely
unnecessary here.
* Make the handover states between the I2C protocol phases (start, stop,
restart, write, read) well defined. Add comments stressing those
pre/postconditions.
* Add checks for SDA arbitration failures and stuck SCL.
* Remove wrong, misleading or redundant comments.
2020-07-15 16:43:07 +08:00
Sebastien Bourdeauducq
8719bab726
Revert "i2c: duplicate TCA9548 control byte"
...
This reverts commit f265976df6
2020-07-08 19:02:02 +08:00
Donald Sebastian Leung
f265976df6
i2c: duplicate TCA9548 control byte
2020-07-03 16:45:05 +08:00
3f0cf6e683
runtime: Stop kernel CPU before restarting comms CPU on panic
...
Before, the system would enter a boot loop when a panic occurred
while the kernel CPU was active (and panic_reset == 1), as
kernel::start() for the startup kernel would panic.
2020-07-01 17:29:05 +08:00
Sebastien Bourdeauducq
d5c1eaa16e
runtime: remove stack alignment requirement
...
I suppose this was for TMPU, but was never finished.
2020-05-29 15:37:23 +08:00
Sebastien Bourdeauducq
02900d79d0
firmware: fix typos
2020-05-29 15:21:07 +08:00
Sebastien Bourdeauducq
4e9a529e5a
kasli: integrate WRPLL
2020-05-07 21:34:02 +08:00
Sebastien Bourdeauducq
35f1814235
kasli: implement virtual LEDs
2020-05-07 19:07:43 +08:00
Sebastien Bourdeauducq
b83afedf43
kasli: light up ERROR LED on panic
2020-05-07 19:06:10 +08:00
Sebastien Bourdeauducq
4982fde898
firmware: I2C I/O expander support
2020-05-05 21:38:17 +08:00
Sebastien Bourdeauducq
ef4e5bc69b
firmware: Kasli I2C EEPROM cleanup
2020-05-05 21:29:29 +08:00
Sebastien Bourdeauducq
9bc43b2dbf
kasli: support EEPROM on v2
2020-04-23 23:00:36 +08:00
Sebastien Bourdeauducq
fb0ade77a9
firmware: fix non-DRTIO build
2020-04-10 17:23:17 +08:00
Sebastien Bourdeauducq
3c823a483a
sayma: improve DAC sync messaging (again)
2020-04-06 22:36:43 +08:00
Sebastien Bourdeauducq
4d601c2102
sayma: improve DAC sync messaging
2020-04-06 22:36:03 +08:00
Sebastien Bourdeauducq
61d4614b61
sayma: fix/cleanup DRTIO-DAC sync interaction
2020-04-06 22:34:05 +08:00
Sebastien Bourdeauducq
facc0357d8
drtio: make sure receive buffer is drained after ping reply
2020-04-06 22:33:15 +08:00
Sebastien Bourdeauducq
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
Robert Jördens
380de177e7
rtio: fix wide output after RTIO refactoring
...
fixes 3d0c3cc1cf
2020-03-05 17:55:27 +00:00
Sebastien Bourdeauducq
52ec849008
sayma: fix sysref_delay_dac
2020-02-05 19:04:01 +08:00
Sebastien Bourdeauducq
bf9f4e380a
si5324: program I2C mux on Metlino
2020-02-03 18:07:59 +08:00
Sebastien Bourdeauducq
bfcbffcd8d
update smoltcp
...
This disables the 'log' features which does not compile, and may break net_trace. To be investigated later.
2020-01-21 13:58:23 +08:00
Sebastien Bourdeauducq
62a52cb086
sayma: do not pollute the log with DAC status on success
2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq
6b428ef3be
sayma: initialize DAC before testing jesd::ready
2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq
ec03767dcf
sayma: improve DAC status report
2020-01-20 18:22:06 +08:00
Sebastien Bourdeauducq
5c299de3b4
sayma: print DAC status on JESD not ready error
2020-01-20 18:21:29 +08:00
Sebastien Bourdeauducq
45efee724e
sayma: add JESD204 PHY done diagnostics
2020-01-20 12:47:31 +08:00
Sebastien Bourdeauducq
3242e9ec6c
wrpll: loop test
2020-01-13 22:31:57 +08:00
Sebastien Bourdeauducq
d5895b8999
wrpll: adpll -> set_adpll
2020-01-13 20:46:36 +08:00
Sebastien Bourdeauducq
e7ef23d30c
wrpll: use CONFIG_CLOCK_FREQUENCY and rtio_frequency in trim_dcxos
2020-01-13 20:44:15 +08:00
Sebastien Bourdeauducq
ea3bce6fe3
wrpll: wait for settling time after setting ADPLL
2020-01-13 20:43:34 +08:00
Sebastien Bourdeauducq
9d7196bdb7
update copyright year
2020-01-13 19:33:44 +08:00
Sebastien Bourdeauducq
e87d864063
wrpll: print ADPLL offsets
2020-01-13 19:32:30 +08:00
Sebastien Bourdeauducq
8edbc33d0e
wrpll: calculate initial ADPLL offsets
2020-01-13 19:29:10 +08:00
Sebastien Bourdeauducq
9dd011f4ad
firmware: remove bitrotten Sayma code
2020-01-13 18:47:54 +08:00
Sebastien Bourdeauducq
583a18dd5f
firmware: expose fmod to kernels. Closes #1417
2020-01-10 14:33:02 +08:00
Sebastien Bourdeauducq
3f32d78c0e
wrpll: simple ADPLL test
2019-12-31 12:12:29 +08:00
Sebastien Bourdeauducq
bb04b082a7
wrpll: clarify comment
2019-12-31 12:12:29 +08:00
Sebastien Bourdeauducq
642a305c6a
wrpll: remove unnecessary delay
...
Counting now happens in the sys domain with no CDC between counter and CPU.
2019-12-30 20:01:06 +08:00
Sebastien Bourdeauducq
f57f235dca
wrpll: new frequency meter
...
As per Mattermost discussion with Tom.
2019-12-30 19:47:57 +08:00
Sebastien Bourdeauducq
dfad27125e
runtime: relax/fix TCP keepalive settings ( #1125 )
2019-12-23 19:58:10 +08:00
Sebastien Bourdeauducq
c5137eeb62
firmware: remove legacy hmc542 code
2019-12-20 15:25:55 +08:00
d3508b014f
firmware: Add whitespace between panic handler location and message
2019-12-17 19:59:59 +00:00
Sebastien Bourdeauducq
6f52540569
wrpll: fix previous commit
2019-12-09 20:13:55 +08:00
Sebastien Bourdeauducq
13486f3acf
wrpll: swap helper/main si549 frequencies
2019-12-09 19:49:34 +08:00
Sebastien Bourdeauducq
4919fb8765
wrpll: print DDMTD helper tags
2019-12-09 17:39:22 +08:00
Sebastien Bourdeauducq
0d4eccc1a5
wrpll: improve debug output
2019-12-09 17:23:09 +08:00
Sebastien Bourdeauducq
f633c62e8d
wrpll: speed up si549 i2c access
2019-12-09 17:22:58 +08:00
David Nadlinger