04b2fd3e13
sayma: fix AD9154NoSAWG ramp clock domain
2018-01-10 12:11:33 +08:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
whitequark
0ce63e7f4a
doc: Rust uses recursive submodules (brrr).
...
[ci skip]
2018-01-10 01:27:18 +00:00
whitequark
16832291eb
doc: update Rust version.
...
[ci skip]
2018-01-10 01:27:18 +00:00
Florent Kermarrec
2009734b3c
serwb/phy: get 625Mbps linerate working, increase timeout
2018-01-09 18:54:52 +01:00
Florent Kermarrec
9c6a7f7509
serwb/kusphy: use same serwb_serdes_5x reset than s7phy
2018-01-09 18:54:05 +01:00
whitequark
267c699835
firmware: support DDRPHY without write leveling ( fixes #886 ).
...
Currently, this is kasli.
2018-01-09 02:41:02 +00:00
whitequark
07ccb9eebd
firmware: support configuration without ethphy ( #886 ).
...
Currently, this is kasli.
2018-01-08 22:16:17 +00:00
whitequark
34a5445802
compiler: don't die if addr2line cannot extract line from backtrace.
...
Fixes #885 .
2018-01-08 21:53:04 +00:00
whitequark
3a3f44af53
firmware: update smoltcp.
2018-01-08 21:41:53 +00:00
whitequark
987a9c8308
conda: update rustc to 1.23.0.
2018-01-08 21:39:15 +00:00
8813aee6b1
targets: add kasli [wip, untested]
2018-01-04 16:12:12 +01:00
161a414567
serwb: debug print on error
2018-01-04 22:23:59 +08:00
e1a75ac1c1
runtime: set log level early
...
We want to debug startup.
2018-01-04 22:19:48 +08:00
whitequark
fc9766d2fa
firmware: reset ethphy before initializing smoltcp ( fixes #884 ).
2018-01-04 11:42:35 +00:00
67746cc7a0
urukul: raise instead of assert, clean up
2018-01-03 19:22:36 +00:00
e3d66d286d
urukul: ad9910 examples
2018-01-03 18:43:04 +00:00
eae7584432
ad9910: add [wip]
2018-01-03 18:43:04 +00:00
7ac809f8b3
urukul: do io reset
2018-01-03 18:43:04 +00:00
28a3ee7e61
urukul: make STA reading robust, add io_rst(), clean up
2018-01-03 18:43:04 +00:00
cef40eef43
ad9912: clean up
2018-01-03 18:43:04 +00:00
d8dbab024d
urukul: don't deal with dds_reset for now
2018-01-03 18:43:04 +00:00
e8608d12f5
device_db.py: whitespace
2018-01-03 18:43:04 +00:00
Florent Kermarrec
1e972034e8
gateware/targets: enable serwb scrambling on sayma amc & rtm
2018-01-03 17:34:46 +01:00
Florent Kermarrec
907af25a69
gateware/serwb: add scrambling, reduce cdc fifo depth
2018-01-03 17:34:03 +01:00
Florent Kermarrec
7f4756a869
gateware/serwb: cleanup packet
2018-01-03 17:30:12 +01:00
08dada9e16
artiq-dev: bump misoc (spi logic fold)
2018-01-03 09:14:35 +01:00
a940550e47
urukul: add CPLD and AD9912 driver [wip]
2018-01-02 19:59:24 +01:00
c2be820e9a
kc705_dds: make ext_clkout 100 MHz
2018-01-02 19:58:47 +01:00
43686f324b
kc705_dds: fix HPC voltages
...
* VADJ is 3.3 V due to the DDS card on LPC
* the LVDS standards need to be 2.5 V
* the direction control register on HPC (FMC-DIO to VHDCI)
was LVCMOS33 but while all the LVDS pairs are at VCCIO=VADJ=3.3 V
they were instantiated as LVDS_25 (ignoring the wrongly powered bank)
* we now use 2.5 V standards on HPC consistently despite VADJ=3.3 V
and hope for the best.
2018-01-02 13:41:07 +01:00
94b84ebe7c
kc705_dds: add urukul spi/ttl channels
2018-01-02 13:20:48 +01:00
53969d3686
kc705_dds: add urukul on vhdci extension definition
2018-01-02 13:20:47 +01:00
2f8e6c7462
spi: add diff_term, save power on outputs
2018-01-02 13:20:47 +01:00
6d20b71dde
ttl_serdes_7series: refactor IOSERDES
2018-01-02 13:20:47 +01:00
whitequark
b7f38b123b
frimware: update to log 0.4.
2018-01-01 11:45:55 +00:00
745e695b09
sayma: output a ramp in the absence of SAWG channels
2017-12-31 12:18:53 +01:00
whitequark
a371b25525
bootloader: allow using without Ethernet.
2017-12-31 09:21:28 +00:00
whitequark
70ebe431fd
satman: fix build after b8f3d28b.
2017-12-31 09:21:02 +00:00
whitequark
e1253db0e8
firmware: update crc dependency, use it in libdrtioaux.
2017-12-31 09:16:11 +00:00
whitequark
b8f3d28bc0
firmware: update compiler_builtins dependency and move it to libboard.
...
This is so that we only specify it once.
2017-12-31 09:16:11 +00:00
a1b8bca1e6
Revert "artiq_flash: ignore RTM FPGA"
...
Naive optimism.
This reverts commit 100bda2582
2017-12-31 13:29:36 +08:00
100bda2582
artiq_flash: ignore RTM FPGA
...
It has no flash connected, and attempting to detect it causes unnecessary program failure when the RTM is not present.
2017-12-31 12:10:16 +08:00
38ce1f1d5d
artiq_flash: support flashing satman
...
A bit ugly and ad-hoc but I cannot think of an easy and better option right now.
2017-12-31 12:09:18 +08:00
a897d82324
ad9154: retry initialization ( #727 )
2017-12-31 11:27:43 +08:00
6e0288e568
drtio: fix GTH CPLL reset
2017-12-30 12:14:36 +08:00
379d29561b
sayma: plausibility assertion on sawg data stream
2017-12-29 19:15:40 +01:00
37eb73bf5c
conda: bump migen
2017-12-29 10:45:46 +08:00
6f27ca81fb
conda/artiq-dev: bump migen (color xilinx, colorama)
2017-12-28 23:37:28 +01:00
f26d08fed3
conda/artiq-dev: bump migen (color vivado 2017.4)
2017-12-28 22:47:25 +01:00
605da18684
conda/artiq-dev: bump misoc (spi)
2017-12-28 16:53:41 +01:00
