jcoates
/
artiq-zynq
forked from M-Labs/artiq-zynq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
658 Commits 3 Branches 0 Tags 1.8 MiB
Commit Graph

426 Commits

Author SHA1 Message Date
David Nadlinger 5c054cc901 Unify Si5324 setup code with main ARTIQ repository [nfc] 
I chose the version from the main repository for two
reasons:
 - Explicitly specifying si5324_ref_input every time would
   not work for the different Kasli/… hardware versions.
 - Having `crystal_ref` as a setting in the configuration
   is misleading if it does not actually activate the crystal
   for use as a reference (but rather does
   `route_crystal_to_ckin2`).

Related m-labs/artiq commits:
 - 740543d4e284245248e3ff838c46505938dcae7a
 - 3c7a394eff553ab75a7ea78bdd17830366504dc6
 2022-12-12 23:22:01 +00:00
Sebastien Bourdeauducq db0e41af6d update zynq-rs and some Rust deps 2022-11-30 22:49:10 +08:00
mwojcik c834e4f503 enable network and mgmt during Rust panic, make RTIO PLL lock failure a panic 
Closes #198 #200

Making it a soft panic makes it more involved with a bit of code duplication - setting up mgmt requires setting up the interface and sockets. Maybe can be done a bit cleaner.

```
[spaqin@hera:~/m-labs/artiq-zynq]$ artiq_sinara_tester
****** Sinara system tester ******
[...]
ConnectionRefusedError: [Errno 111] Connection refused

[spaqin@hera:~/m-labs/artiq-zynq]$ artiq_coremgmt -D 192.168.1.56 log
[     0.000067s]  INFO(runtime): NAR3/Zynq7000 starting...
[     0.005238s]  INFO(runtime): detected gateware: GenericMaster
[     0.016152s]  INFO(libboard_zynq::i2c): PCA9548 detected
[     0.023004s]  WARN(runtime): config initialization failed: SD error: Card initialization error: No card inserted, check if the card is inserted properly.
[     0.036730s]  WARN(runtime::rtio_clocking): error reading configuration. Falling back to default.
[     0.213000s] ERROR(runtime::rtio_clocking): RTIO PLL failed to lock
[     0.224443s]  INFO(libboard_zynq::i2c): PCA9548 detected
[     0.256197s]  INFO(runtime::comms): network addresses: MAC=e8-eb-1b-13-49-8b IPv4=192.168.1.56 IPv6-LL=fe80::eaeb:1bff:fe13:498b IPv6: no configured address
[     0.270183s] ERROR(runtime::comms): There has been an error configuring the device: RTIO PLL failed to lock. Only mgmt interface will be available.
[     4.000095s]  INFO(libboard_zynq::eth): eth: got Link { speed: S1000, duplex: Full }
[    33.148521s]  INFO(runtime::mgmt): received connection
```

Reviewed-on: M-Labs/artiq-zynq#199
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-10-21 17:56:34 +08:00
mwojcik dc862a9051 match ident message with mainline 2022-10-21 12:08:11 +08:00
mwojcik 19e60073de kasli_soc: ident = variant name 2022-10-21 11:55:24 +08:00
Egor Savkin a546d0f95b Implement reboot for artiq_coremgmt 2022-10-07 18:31:11 +08:00
Sebastien Bourdeauducq d6ae646790 update dependencies 2022-10-07 18:30:39 +08:00
Sebastien Bourdeauducq f3310324d7 update dependencies 2022-08-26 17:37:27 +08:00
Sebastien Bourdeauducq 0812f22423 update dependencies 2022-07-20 17:34:26 +08:00
kk105 b638fce069 update SEEN_ASYNC_ERRORS in destination_survey (#195) 
Co-authored-by: kk105 <kkl@m-kabs.hk>
Reviewed-on: M-Labs/artiq-zynq#195
Co-authored-by: kk105 <kkl@m-labs.hk>
Co-committed-by: kk105 <kkl@m-labs.hk>
 2022-06-20 17:41:08 +08:00
occheung 9ec6a1feab dyld/rebind: support rela generation with nac3ld 2022-06-01 21:27:38 +08:00
occheung 8e144e41de reloc: impl ARM_PREL31 handling 2022-06-01 21:27:38 +08:00
occheung 512b6bac12 reloc: add PC-relative relocation support 2022-06-01 21:27:38 +08:00
occheung e3ed41ff32 fix index table reference type 2022-06-01 18:35:50 +08:00
occheung 97a63ca8d0 dyld: add EXIDX entry type 
The type is just for aesthetic. The interpretation of an index table entry is not our concern.
 2022-06-01 18:33:19 +08:00
occheung f0febe0ee4 change catch type to single reference 2022-05-31 18:26:30 +08:00
mwojcik 7a8f96dbd9 rtio_mgt: use mutex's async_lock 2022-05-25 10:39:06 +08:00
mwojcik 596edb480c cargo: update zynq-rs 2022-05-25 10:37:38 +08:00
mwojcik 4f457d9c24 moninj: log link down at debug level 2022-05-25 10:37:38 +08:00
mwojcik 24df52268e moninj: restructure timeout 
stop logging errors if satellite is unavailable
drtio: don't even send message if link is down
 2022-05-25 10:37:38 +08:00
mwojcik 48c9b43171 moninj: make it use async drtioaux 2022-05-25 10:37:38 +08:00
mwojcik 57d7f01b04 drtio: port 64-bit padding from mainline 2022-05-24 15:43:01 +08:00
mwojcik efc432352e zc706: no syncrtio for master, fixes hangs (#188) 2022-05-03 14:36:10 +08:00
mwojcik def4d989cd kasli_soc: fix si5324 pins routed to GTX 2022-04-25 12:33:21 +08:00
mwojcik 1d731a3589 zc706 master: route sma clock to si5324 2022-04-13 16:35:52 +08:00
mwojcik 3cf86a6335 satellites: add rtio_crg cfg 2022-04-12 13:44:53 +08:00
mwojcik 78bc162749 rtio_clocking: remove loop 2022-04-12 13:33:52 +08:00
mwojcik 14f7778732 update libconfig features 2022-04-08 10:30:21 +08:00
mwojcik dcfb28ce61 fix drtioaux packet corruption 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-04-01 14:15:14 +08:00
mwojcik 433a9cdaf1 runtime: fix warnings on nondrtio systems 2022-03-29 10:05:11 +08:00
Sebastien Bourdeauducq a79bef2243 runtime: provide/fix more libc mem functions 2022-03-28 13:24:01 +08:00
Sebastien Bourdeauducq c6ef9b117c fix previous commit 2022-03-26 20:08:11 +08:00
Sebastien Bourdeauducq dcfaf587ec firmware: add UnwrapNoneError exception 2022-03-26 15:29:40 +08:00
mwojcik a92561b9d3 implement rtio_get_destination_status (#177) 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-03-25 18:20:05 +08:00
Sebastien Bourdeauducq 161044e78f drop support for big-endian moninj 2022-03-19 23:01:36 +08:00
Sebastien Bourdeauducq 426500d2f9 firmware: support 64-bit moninj probes 2022-03-17 20:26:44 +08:00
Sebastien Bourdeauducq ebdb08180d drtio: demote default routing table message to info 2022-03-16 21:04:12 +08:00
Sebastien Bourdeauducq 0530e596ba mgmt: remove spurious config write warning 2022-03-16 08:24:52 +08:00
Sebastien Bourdeauducq 7502f3a765 update dependencies 2022-03-10 17:25:40 +08:00
pca006132 ae0d724bf8 runtime: use &CSlice for lists 2022-03-10 16:30:34 +08:00
occheung 6c834899e9 si5324: fix clock source 2022-03-09 13:55:36 +08:00
occheung a22b13cc46 kasli_soc: forward SMA clkin 2022-03-09 12:43:47 +08:00
spaqin 85e5c08d7f kasli_soc: use si5324 in master 2022-03-04 13:17:53 +08:00
spaqin 3c17362fad satman: fix i2cswitch 2022-03-03 17:18:22 +08:00
spaqin 4f2a0986da rtio_clocking: fix wrong descriptions 2022-03-03 10:24:13 +08:00
spaqin 4a2218641f fix BorrowMutError in moninj 2022-03-02 15:45:17 +08:00
mwojcik 9a06cd9d27 expose pca954x_select api (#167) 
PR accompanying to ARTIQ's PCA954X support (#1860).
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-03-02 10:52:27 +08:00
Sebastien Bourdeauducq b56b50b147 add comment about EXCEPTION_ID_LOOKUP sync 2022-03-01 09:50:28 +08:00
pca006132 f38117774f runtime/eh_artiq: updated exception IDs 
Fixes #166
 2022-02-28 21:15:07 +08:00
Sebastien Bourdeauducq 880ba6b206 runtime: add nac3 exception symbols 2022-02-23 11:05:08 +08:00
mwojcik accac99f48 updated zynq-rs with pca9547 support (#165) 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-02-11 13:53:58 +08:00
pca006132 6f5ba46e89 runtime/eh_artiq: support exception allocation 
The backtrace is now nested, and should be used together with the stack
pointer array to construct the full backtrace for each exception.
We now allocate exception objects in a stack, but their names are still
not allocated. This is fine for exceptions raised in the driver or artiq
code, but we will have to implement allocation for names of exceptions
raised in RPC calls. The compiler should also emit code to store the
exception names once they catch it, to prepare for later reraising.
 2022-01-23 21:31:22 +08:00
pca006132 8923feceac runtime/eh_artiq: use forced unwind 
This patches ports the LLVM libunwind newly added forced unwinding
function. This enables us to run forced unwinding to obtain correct
backtrace when uncaught exceptions occur.

This patch also changes the exception handling scheme from the standard
two-phase unwinding to single phase using forced unwinding. This brings
some performance improvement and prepared for later nested exception
support. For nested exceptions, we will have to record the backtrace
regardless if the exception is an uncaught exception, as there can be
another exception being thrown while executing the finally block for
caught exceptions, and we will lose the backtrace if we don't store it
earlier before running the cleanup pads.
 2022-01-14 13:35:24 +08:00
pca006132 97ca72f7f1 libunwind: enable lto 2022-01-06 14:04:04 +08:00
pca006132 acaf388dbb eh_artiq: handle catch clauses appropriately 2022-01-06 13:41:47 +08:00
pca006132 8788d6458e runtime/rpc: fixes alignment and size problem 2022-01-04 18:25:53 +08:00
pca006132 efe315c21d libdyld: accepts R_ARM_ABS32 
Somehow this relocation type is emitted by nac3.
According to table 4-9 of ARM ELF ABI and discussion in ld bugzilla
(https://sourceware.org/bugzilla/show_bug.cgi?id=16163), this behaves
the same as R_ARM_GLOB_DAT and R_ARM_JUMP_SLOT.
 2021-12-30 00:05:47 +08:00
stevefan1999 84becfe2c0 report async errors upon kernel termination 
Port of 4a6bea479a

Co-authored-by: Steve Fan <sf@m-labs.hk>
Reviewed-on: M-Labs/artiq-zynq#156
Co-authored-by: stevefan1999 <sf@m-labs.hk>
Co-committed-by: stevefan1999 <sf@m-labs.hk>
 2021-12-06 17:38:55 +08:00
mwojcik 31fb2b388a Support for DRTIO 100MHz (#155) 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-12-03 17:19:42 +08:00
mwojcik e045837b67 zc706: not actually ultrascale 2021-11-29 12:48:45 +08:00
mwojcik ada3f2e704 drtio: reading still needs work buffer after all 2021-11-29 12:46:08 +08:00
mwojcik 8be5048cd3 upgrade to new clock configuration system (#152) 
As mentioned in https://github.com/m-labs/artiq/issues/1735 - this is the Zynq version.

Reviewed-on: M-Labs/artiq-zynq#152
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-11-29 11:17:59 +08:00
mwojcik e8db2a4b49 drtio: crc from mainline, removed byte swap 2021-11-24 12:12:40 +08:00
mwojcik 0b27349ec4 dummy_spi -> pmod_spi 2021-10-14 16:37:13 +08:00
mwojcik 21eb1cab1a zc706: added dummy spi in place of sdio 2021-10-14 15:43:51 +08:00
mwojcik 3096daaaee zc706: removed nist_clock sdcard, put pmod instead 2021-10-14 15:01:38 +08:00
mwojcik 4fbfccf575 zc706: fix nist_qc2 extension, ams101 iostandard 2021-10-14 12:39:09 +08:00
mwojcik 5c40115945 make ZC706 RTIO channels consistent with KC705 
Reviewed-on: M-Labs/artiq-zynq#147
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-13 17:20:25 +08:00
Sebastien Bourdeauducq a5e3580d18 Revert "runtime: expose rint from libm" 
This reverts commit 3582af564d.
 2021-10-11 08:13:26 +08:00
Sebastien Bourdeauducq 3582af564d runtime: expose rint from libm 2021-10-10 20:40:29 +08:00
mwojcik 219c075931 added explicit runtime/satman targets for makefile 
Reviewed-on: M-Labs/artiq-zynq#144
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-08 21:06:23 +08:00
mwojcik d04a7decfe removed simple variants from zc706 2021-10-08 11:07:12 +02:00
mwojcik 0efa83e956 update build scripts for DRTIO 
Reviewed-on: M-Labs/artiq-zynq#135
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-08 16:25:13 +08:00
Sebastien Bourdeauducq 4fa824f42b kasli-soc: remove irrelevant comment 2021-10-08 16:13:17 +08:00
mwojcik ab0c205dd2 gateware: add DRTIO 
Reviewed-on: M-Labs/artiq-zynq#140
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-08 16:12:30 +08:00
mwojcik 8d2bb09149 add satman firmware (#136) 
Reviewed-on: M-Labs/artiq-zynq#136
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-08 16:04:50 +08:00
mwojcik aaec0abdf6 fix build/warnings before drtio is fully merged 2021-10-06 16:17:19 +08:00
mwojcik e241957419 add libbuild_zynq 
Reviewed-on: M-Labs/artiq-zynq#141
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-06 16:16:49 +08:00
mwojcik 50262b3f0c runtime: link_thread -> link_task 2021-10-06 07:59:55 +02:00
mwojcik 827c6c1306 runtime: switch to libio/libboard_artiq, add DRTIO mastering support 
Reviewed-on: M-Labs/artiq-zynq#137
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-06 13:05:45 +08:00
mwojcik e6863263b4 add libboard_artiq (to be shared between runtime and satman) 
Reviewed-on: M-Labs/artiq-zynq#139
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-06 13:02:28 +08:00
mwojcik d7f45d473e add libio (to be shared between runtime and satman) 
Reviewed-on: M-Labs/artiq-zynq#138
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-06 13:01:52 +08:00
pca006132 35250b3f56 libdyld: fixed symbol relocation 
Note that in libdyld/src/lib.rs #117-118, image pointer is already added
to the symbol offset, so we do not need to add the pointer again
 2021-09-25 11:30:45 +08:00
Sebastien Bourdeauducq 2ed2ffe417 update dependencies 2021-08-09 15:16:54 +08:00
Sebastien Bourdeauducq 18e05c91e1 zc706: si5324 is not needed for standalone target 2021-08-04 09:14:19 +08:00
mwojcik e3d3cb2311 si5324: bring on par with mainline ARTIQ (#132) 
si5324 driver in runtime should be now equal in function to the one in artiq.

kasli-soc has no way of doing a hard reset on the peripheral, but zc706 does.

Reviewed-on: M-Labs/artiq-zynq#132
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-08-04 09:12:38 +08:00
Sebastien Bourdeauducq f543501012 si5324: remove debug print 2021-08-02 14:14:59 +08:00
Sebastien Bourdeauducq 111ac0c716 runtime: clock Si5324 from its crystal 2021-07-30 17:07:58 +08:00
Sebastien Bourdeauducq 8128dc0b56 Revert "kasli-soc: work around I2C breakage (#130)" 
This reverts commit f1fd55dee5.
 2021-07-30 16:55:06 +08:00
Sebastien Bourdeauducq dcb6129b0e update dependencies 2021-07-05 13:56:40 +08:00
Sebastien Bourdeauducq f25e261bdd update dependencies 2021-06-25 17:12:47 +08:00
Sebastien Bourdeauducq 2ba4d8935d fix compilation with nixpkgs 21.05 
The environment variable is optional to keep compatibility with other build environments.

Closes #131
 2021-06-25 15:57:39 +08:00
Sebastien Bourdeauducq 8c8a5d53b9 update dependencies 2021-06-19 22:51:25 +08:00
Sebastien Bourdeauducq 852123b42a kasli-soc: add RTIO LEDs 2021-05-30 20:40:53 +08:00
Sebastien Bourdeauducq f1fd55dee5 kasli-soc: work around I2C breakage (#130) 2021-05-29 17:13:41 +08:00
Sebastien Bourdeauducq 21d98711c1 use new smoltcp error code 2021-05-29 17:13:22 +08:00
Sebastien Bourdeauducq 0ae2138034 kasli-soc: preliminary si5324 support 2021-05-29 16:15:27 +08:00
Sebastien Bourdeauducq 1b474d2dd4 update dependencies 2021-05-29 14:20:23 +08:00
Sebastien Bourdeauducq 506c741238 support absence of gateware RTIO clock selection mux 2021-02-15 21:41:30 +08:00
Sebastien Bourdeauducq 8815f76114 kasli_soc: fix has_grabber 2021-02-15 21:41:02 +08:00