Robert Jördens
12e39a64cf
sawg: reduce f0 oscillator width to 32
2016-11-19 17:07:07 +01:00
Robert Jördens
04813ea29b
sawg: wir up limiting, saturating addition
2016-11-19 16:12:27 +01:00
Robert Jördens
e53d0bcd5b
dsp: add limits support to SatAddMixin
2016-11-19 16:12:27 +01:00
Robert Jördens
97a54046e8
rtio: auto clear output event data and address
...
This is to support channels where variable length
event data is well-defined through zero-padding.
E.g. in the case of `Spline` zero-padding of events naturally
corresponds to low-order knots.
Use timestamp change as trigger. This assumes that writes to the
timestamp register always precede address and data writes.
It does not break support for ganged writes of the same event
timestamp and data/address to multiple channels or
channel-addresses.
2016-11-19 16:12:27 +01:00
Robert Jördens
b714137f76
phaser: 150 MHz rtio/jesd clock
2016-11-19 13:16:30 +01:00
Robert Jördens
0ee47e77ae
phaser: fix widths
2016-11-18 17:24:11 +01:00
Robert Jördens
bcde26f990
Revert "phaser: cap phy data width to 64 temporarily"
...
This reverts commit 342b9e977e
2016-11-18 17:08:44 +01:00
Robert Jördens
641f07119f
runtime: support rtio data wider than 64 bit
2016-11-18 17:08:33 +01:00
Robert Jördens
342b9e977e
phaser: cap phy data width to 64 temporarily
2016-11-18 15:46:59 +01:00
Robert Jördens
7664b226f2
phaser/conda: bump jesd204b
2016-11-18 15:34:03 +01:00
Robert Jördens
14ddcd2e30
Revert "dsp/Delay: reset_less"
...
for now
This reverts commit 98193d6fa1
2016-11-18 15:25:42 +01:00
Robert Jördens
d678bb3fb6
phaser: update sawg tests
2016-11-18 15:23:56 +01:00
Robert Jördens
51f23feeac
dsp: implement sawg features
2016-11-17 03:20:37 +01:00
Robert Jördens
98193d6fa1
dsp/Delay: reset_less
2016-11-17 02:36:29 +01:00
Robert Jördens
424a1f8f4e
dsp: move test tools
2016-11-16 13:39:19 +01:00
Robert Jördens
b9ce2bb1f0
Merge branch 'phaser' into phaser2
...
* phaser: (127 commits)
phaser: use misoc cordic
phaser: fix DDS dummy cfg
runtime: disable the Nagle algorithm entirely.
runtime: buffer RPC send packets.
runtime: don't print debug messages to the UART.
runtime: print microsecond timestamps in debug messages.
artiq_devtool: abort if build failed.
conda: bump llvmlite-artiq dep.
conda: bump llvmlite-artiq dep.
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
artiq_devtool: more robust port forwarding.
setup: remove paramiko dependency (optional and developer-only)
artiq_devtool: implement.
artiq_compile: actually disable attribute writeback.
conda: use pythonparser 1.0.
conda: tighten pythonparser dependency (fixes #600 ).
doc: clarify kernel_invariant doc (fixes #609 ).
compiler: Emit all-kernel_invariant objects as LLVM constants
conda: update for LLVM 3.9.
add has_dds, use config flags
...
2016-11-13 17:30:37 +01:00
Robert Jördens
70a70320bd
phaser: use misoc cordic
2016-11-13 17:29:38 +01:00
Robert Jördens
2e482505c6
phaser: fix DDS dummy cfg
2016-11-13 17:08:59 +01:00
Robert Jördens
aedb6747f2
Merge branch 'master' into phaser
...
* master: (47 commits)
runtime: disable the Nagle algorithm entirely.
runtime: buffer RPC send packets.
runtime: don't print debug messages to the UART.
runtime: print microsecond timestamps in debug messages.
artiq_devtool: abort if build failed.
conda: bump llvmlite-artiq dep.
conda: bump llvmlite-artiq dep.
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
artiq_devtool: more robust port forwarding.
setup: remove paramiko dependency (optional and developer-only)
artiq_devtool: implement.
artiq_compile: actually disable attribute writeback.
conda: use pythonparser 1.0.
conda: tighten pythonparser dependency (fixes #600 ).
doc: clarify kernel_invariant doc (fixes #609 ).
compiler: Emit all-kernel_invariant objects as LLVM constants
conda: update for LLVM 3.9.
add has_dds, use config flags
Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
Revert "Revert "Revert "Update for LLVM 3.9."""
...
2016-11-13 16:54:28 +01:00
18c394976e
runtime: disable the Nagle algorithm entirely.
...
See also commit feed91d; that commit fixed the test_rpc_timing test,
but caused frequent hangs elsewhere, which were also caused by buggy
Nagle implementation. Just disable this entirely, as with our
explicit buffering it provides no benefit anyway.
2016-11-13 00:33:24 +00:00
feed91d8b2
runtime: buffer RPC send packets.
...
This brings mean RPC time from ~45ms to ~2ms.
The cause of the slowness without buffering is, primarily, that lwip
is severely pessimized by small writes, whether with Nagle on or off.
(In fact, disabling Nagle makes it function *better* on many small
writes, which begs the question of what's the point of having Nagle
there in the first place.) In practical terms, the slowness appears
only when writing a 4-byte buffer (the synchronization segment);
writing buffers of other sizes does not trigger the problem.
This all is extremely confusing and the fix is partly palliative,
but since it seems to work reliably and we're migrating off lwip
I think it is unwise to spend any more time debugging this.
2016-11-12 23:06:33 +00:00
3ce1826891
runtime: don't print debug messages to the UART.
...
It takes ~4ms to print an empty log line because of how slow
the UART is. This makes the log timestamps useless for debugging
performance problems.
After this commit, it takes ~75us to print an empty log line instead,
which pessimizes test_rpc_timing by less than 2ms with tracing
enabled.
2016-11-12 20:26:32 +00:00
acc5e53b32
runtime: print microsecond timestamps in debug messages.
2016-11-12 20:26:32 +00:00
dca3fb5c96
artiq_devtool: abort if build failed.
2016-11-12 20:26:32 +00:00
7c2b1155ef
conda: bump llvmlite-artiq dep.
2016-11-12 13:58:00 +00:00
5eb940deb7
conda: bump llvmlite-artiq dep.
2016-11-12 04:09:34 +00:00
d3ee858d16
llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
...
This helps LICM, among other things.
2016-11-12 04:08:58 +00:00
8b6418c604
artiq_devtool: more robust port forwarding.
2016-11-11 15:22:07 +00:00
Sebastien Bourdeauducq
fbc2420443
setup: remove paramiko dependency (optional and developer-only)
2016-11-11 11:05:37 +08:00
3b6cbb1f06
artiq_devtool: implement.
2016-11-10 20:25:15 +00:00
0e76cbc414
artiq_compile: actually disable attribute writeback.
...
I wrote both halves of this condition but forgot to hook
them together.
Fixes #586 .
2016-11-10 01:04:36 +00:00
67e743d74a
conda: use pythonparser 1.0.
2016-11-09 15:19:27 +00:00
71f1d38860
conda: tighten pythonparser dependency ( fixes #600 ).
2016-11-09 15:10:53 +00:00
eee8d05398
doc: clarify kernel_invariant doc ( fixes #609 ).
2016-11-09 14:59:57 +00:00
bfbdba9205
compiler: Emit all-kernel_invariant objects as LLVM constants
...
This enables constant propagation optimisations, as verified by
the included test case. This is only a first stop-gap measure, though;
we should support optimisation based on kernel invariants on a more
fine-grained level.
2016-11-09 14:50:48 +00:00
124b257e05
conda: update for LLVM 3.9.
2016-11-08 23:24:03 +00:00
Sebastien Bourdeauducq
99ad9b5917
add has_dds, use config flags
2016-11-08 23:33:03 +08:00
ec8fe6f8bd
Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
...
This reverts commit 7b81ed1d18
2016-11-08 14:22:47 +00:00
7b81ed1d18
Revert "Revert "Revert "Update for LLVM 3.9."""
...
This reverts commit 0d7688017b
2016-11-08 12:58:20 +00:00
a8fd697d41
runtime: unbreak 453e8b7.
...
Running
rustc --cfg 'foo="1"'
does not result in a statement of the form
do_thing()
to be compilex in.
2016-11-08 12:57:06 +00:00
e0297039c9
artiq_run: fix bitrot in .ll/.bc runners.
2016-11-08 12:08:20 +00:00
0d7688017b
Revert "Revert "Update for LLVM 3.9.""
...
This reverts commit 5f5975844a
2016-11-08 11:59:16 +00:00
798a5f70df
Revert "runtime: remove some redundant libm functions copied inline."
...
This reverts commit fee75bd50f
2016-11-08 11:54:17 +00:00
6e77f65d50
compiler: Clarify recv_rpc value names and documentation [nfc]
...
Previously, the phi emitted for the pointer parameter to recv_rpc was –
rather confusingly – called "size", and the pseudo-code in the comment
had bit-rotted.
Signed-off-by: David Nadlinger <code@klickverbot.at>
2016-11-07 14:38:21 +00:00
Sebastien Bourdeauducq
453e8b7eb3
runtime: support configurations without moninj, log or dds
2016-11-06 23:53:10 +08:00
Robert Jördens
d158c69be0
phaser: fix frequency comment
2016-11-05 16:54:23 +01:00
7dcc987dd7
compiler: Fix break/continue targets in loop else blocks
...
Previously, they would still target the respective labels in the
just-exited loop.
Signed-off-by: David Nadlinger <code@klickverbot.at>
2016-11-05 02:35:01 +00:00
f102f2d4e6
manual: fix rustc invocation.
2016-11-04 09:11:45 +00:00
Sebastien Bourdeauducq
8ec73cb9ec
dashboard: pack moninj widgets ( #603 )
2016-11-04 16:20:46 +08:00
Sebastien Bourdeauducq
9d58b4516c
manual: Vivado is now default
2016-11-04 11:54:04 +08:00
Robert Jördens
whitequark
Sebastien Bourdeauducq
David Nadlinger