4a0eaf0f95
phaser: add jesd204b rtio dds
...
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
2016-10-05 16:17:50 +02:00
82fbd3e9c9
doc: CCBs, applet setup from experiment
2016-09-09 23:25:29 +08:00
4ef5eb2644
doc: move VADJ, closes #554
2016-09-09 18:40:58 +08:00
c38e2cda9d
doc/manual: no analytics_id with rtd
2016-08-25 22:21:29 +02:00
0a4d4e30ef
doc: use sphinx_rtd_theme
2016-08-25 21:52:46 +02:00
8753785ef7
doc/rtio: cleanup
2016-08-25 20:42:44 +02:00
9f7c33ca84
doc/rtio: make vis coloring consistent
2016-08-25 19:23:06 +02:00
c2e0e0bd7e
doc/rtio: vis RTIOUndeflow tweak
2016-08-25 19:14:31 +02:00
8f952fdb98
doc/rtio: vis RTIOUnderflow
2016-08-25 19:06:11 +02:00
446dcf2123
doc/rtio: input vis
2016-08-25 18:42:16 +02:00
eb180da730
doc/rtio: vis: now_mu -> now since not didactically relevant
2016-08-25 18:18:02 +02:00
aabe53e5fa
doc/rtio: handover vis, tweak other vis's
2016-08-25 18:15:48 +02:00
7481d4e732
doc/rtio: sync() visualization
2016-08-25 14:51:34 +02:00
aee0345ed7
doc: ship wavedrom js b/c https
2016-08-25 12:56:36 +02:00
60919c2ea7
doc: use wavedrom to visualize stuff
2016-08-25 12:17:05 +02:00
552146bd08
doc/rtio: fix description of idle kernel/reset
2016-08-25 12:17:05 +02:00
69ea3d3cc0
doc: rtio concepts, closes #451
2016-08-24 17:39:03 +02:00
df876a4e06
doc: expand/refine getting_started_core
2016-08-23 18:01:34 +02:00
5adda1c4c8
doc: cleanup git checkout instructions (see #542 )
2016-08-23 18:00:54 +02:00
whitequark
9a0c3dae93
doc: add our binutils patch to installing_from_source.
2016-08-21 19:55:59 +00:00
whitequark
cea57e2b46
doc: update installing_from_source.
2016-08-21 02:16:48 +00:00
728aff71ae
manual: explain how applets work. Closes #536
2016-08-11 19:09:47 +08:00
whitequark
3dc0101459
doc: explain monomorphism of user-defined classes.
...
Fixes #523 .
2016-08-03 23:18:54 +00:00
ecda94705e
doc/management_system: point out check_pause() ( closes #522 )
2016-07-21 16:42:09 +02:00
06bb1a2774
doc/installing_from_source: update/fix ( closes #516 )
2016-07-21 16:33:51 +02:00
d2d897a885
manual/getting_started: add examples location info, closes #501
2016-07-07 12:43:10 +08:00
ea10a2af6e
manual/faq: update for inter-experiment seamless handover
2016-07-07 12:42:46 +08:00
18eddd00e1
manual: add core.reset() calls
2016-06-29 11:48:33 +08:00
3befe37221
manual: minor cleanup
2016-06-22 10:01:56 +08:00
48c0812df0
manual: split source install instructions to a separate page
2016-06-22 09:45:56 +08:00
2912515e5c
doc: add warning about pipistrello current draw
2016-06-11 10:26:35 -06:00
ca9724f517
doc: add core device comms details
2016-06-11 10:01:15 -06:00
whitequark
284e0d6876
doc: update installing.rst to reflect openocd packaged in conda.
2016-06-04 07:53:53 +00:00
e8aadd0a1a
doc: document common KC705 problems. Closes #450
2016-06-03 23:20:38 -04:00
5ce155614e
doc/getting_started_mgmt: adapt to changes. Closes #462
2016-06-03 23:10:00 -04:00
5ebd28f576
doc: fix bool input
2016-06-03 22:56:12 -04:00
10267f39c9
log: use broadcast instead of sync_struct, filter on new messages only ( #411 )
2016-05-27 23:43:29 -05:00
a6afc16585
doc/manual: add links to source code
2016-05-27 19:01:14 +02:00
e98fdfa7ca
manual/installing: mention netmask and gateway. Closes #441
2016-05-25 10:32:36 -05:00
dhslichter
141edb521a
qc2: swap SPI/TTL, all TTL lines are now In+Out compatible
2016-05-19 10:42:03 +08:00
9898daf9a4
README: DOI/citation format
2016-05-11 15:23:28 +02:00
whitequark
79c7c2dd45
doc: explain RPC return type annotations.
...
Fixes #410 .
2016-04-29 12:09:14 +00:00
e8ae6fcd9f
doc: move compiler details to separate chapter
2016-04-27 01:35:40 +08:00
whitequark
00c0a306ef
doc: Document fast-math flag and kernel invariants.
...
Fixes #351 , #359 .
2016-04-26 02:15:16 +00:00
faa268e814
manual/installing: --toolchain vivado
2016-04-14 01:25:36 +08:00
6fc73a0256
manual/installing: -H nist_...
2016-04-14 01:20:13 +08:00
a5038726be
typo
2016-04-14 01:17:56 +08:00
dd0e622e4a
manual/faq: list HITL TTL connections
2016-04-14 01:01:51 +08:00
7d2fa951d6
manual/git: commit needed before starting master, refresh. Closes #387
2016-04-14 00:33:56 +08:00
dhslichter
f395a630e0
Updated qc2 pinouts for SPI and 2x DDS bus, update docs
2016-04-13 18:38:34 +08:00
56af4e9147
doc/installing: add note about example dependencies
2016-04-11 17:03:49 +08:00
36c1fdb5ad
installing.rst: typo
2016-04-10 21:01:00 +08:00
62eae5eb34
installing.rst: adapters renaming from ed1c368
2016-04-10 11:21:09 +08:00
7f7750eef2
installing.rst: triple colons
2016-04-10 11:17:45 +08:00
26f55f2010
installing.rst: update, clarify
2016-04-09 23:58:11 +08:00
4e802f844d
README: rewrite, summarizing more aspects of ARTIQ
2016-04-09 23:55:27 +08:00
4c32334d90
introduction.rst: update license
2016-04-09 21:33:25 +08:00
whitequark
32102bc25f
doc: use proper CMAKE_BUILD_TYPE for LLVM.
...
Fixes #380 .
2016-04-06 22:05:55 +00:00
eb68ab9ad0
doc: remote execution
2016-04-06 19:13:41 +08:00
221d1bde0c
manual/developing_a_ndsp: update to new bind interface
2016-04-06 19:13:01 +08:00
e1da9de39d
manual/faq: cleanup/update
2016-04-05 14:17:06 +08:00
affe4d45aa
ship examples with package
2016-04-05 13:59:39 +08:00
3efb841557
client: add --async option to scan-repository, recommend usage in git post-receive
2016-04-04 22:17:39 +08:00
7453d85d5e
GUI -> dashboard
2016-04-04 22:12:45 +08:00
c6516f3c83
doc: conda channel -> label
2016-03-31 10:29:07 +02:00
d561681cc1
doc: add note about xcb ( closes #361 )
2016-03-31 10:28:57 +02:00
05317a9259
manual: QC2 FMC voltage
2016-03-31 10:47:16 +08:00
1a513634ff
doc/tutorial: add missing type annotation in LED example. Closes #356
2016-03-29 14:53:52 +08:00
4c622194c2
doc: update flterm instructions. Closes #346
2016-03-25 20:10:53 +08:00
22cd12f721
doc: correctly place the openocd section, link it, add explanation
2016-03-20 20:19:12 +01:00
Joe Britton
d069380f6b
Fix typo. And in build of openocd on Ubuntu the aclocal dependency is provided by automake.
...
adduser requires root
conda installation requires user to build OpenOCD by hand.
2016-03-20 20:18:32 +01:00
8e41d50145
doc: add pipistrello adapter explicitly ( closes : #339 )
2016-03-20 19:57:07 +01:00
878ab9a39b
manual: document DDS and SPI RTIO channels
2016-03-10 22:38:49 +08:00
1739e0f2f8
coredevice: put cache into separate file/device
2016-03-10 10:46:19 +08:00
f0b0b1bac7
support for multiple DDS buses (untested)
2016-03-09 17:12:50 +08:00
f33baf339f
pipistrello: drop ttls on pmod, add leds back in
2016-03-08 23:34:51 +01:00
f39208c95a
pipistrello: try with fewer leds/pmod ttl
2016-03-08 22:10:47 +01:00
104d641c59
pipistrello: move the spi channel like kc705
2016-03-08 13:30:05 +01:00
40c1cde2e2
doc: kc705.clock: add spi bus mappings ( closes #321 )
2016-03-08 13:28:32 +01:00
9898cb14db
doc: add pipistrello spi bus
2016-03-08 13:18:55 +01:00
e23e91f8ac
doc: add pipistrello pmod ttl channels
2016-03-08 13:13:33 +01:00
2770d9c729
doc: I2C/QC2
2016-03-05 19:02:03 +08:00
669fbaa4f1
ad53xx->ad5360 and refactor
2016-03-04 00:00:25 +01:00
f754d2c117
Merge branch 'spimaster'
...
* spimaster: (52 commits)
runtime/rtio: rtio_process_exceptional_status() has only one user
coredevice.spi, doc/manual: add spi
kc705: move ttl channels together again, update doc
runtime: rt2wb_input -> rtio_input_data
examples/tdr: adapt to compiler changes
bridge: really fix O/OE
runtime: define constants for ttl addresses
coredevice.ttl: fix sensitivity
bridge: fix ttl o/oe addresses
runtime: refactor ttl*()
rtio: rm rtio_write_and_process_status
coredevice.spi: unused import
rt2wb, exceptions: remove RTIOTimeout
gateware.spi: delay only writes to data register, update doc
nist_clock: disable spi1/2
runtime/rt2wb: use input/output terminology and add (async) input
examples: update device_db for nist_clock spi
gateware.spi: rework wb bus sequence
nist_clock: rename spi*.ce to spi*.cs_n
nist_clock: add SPIMasters to spi buses
...
2016-03-01 22:08:08 +01:00
0456169558
coredevice.spi, doc/manual: add spi
2016-03-01 21:29:09 +01:00
2cc1dfaee3
kc705: move ttl channels together again, update doc
2016-03-01 19:40:32 +01:00
8fa98f6486
doc: use term 'gateware'
...
FPGA newcomers are not used to the term 'bitstream'. To insist that this file
is the result of the gateware compilation and thus the binary FPGA format,
add the term 'gateware' as a prefix.
2016-02-29 20:50:45 +01:00
5fad570f5e
targets/kc705-nist_clock: add clock generator on LA32 for testing purposes
2016-03-01 00:35:26 +08:00
a1e1f2b387
doc: insist that output() must be called on TTLInOut. Closes #297
2016-03-01 00:28:40 +08:00
d0d56bd3fe
doc: update install instructions
2016-03-01 00:19:55 +08:00
5d41113dbc
doc: convert to 'with parallel'
2016-02-23 15:53:41 +08:00
whitequark
51a5910002
Rename 'with parallel' to 'with interleave' ( #265 ).
2016-02-22 13:24:43 +00:00
be6b64a243
doc: fix conda install instructions
2016-02-22 17:52:18 +08:00
14683f297a
doc: remove 'Ubuntu 15.10+/Debian jessie+ specific instructions'. Closes #282
2016-02-22 12:08:22 +08:00
122ddc40aa
doc: add section for RTIO analyzer, mention GtkWave
2016-02-15 23:07:41 +01:00
whitequark
617c416124
Add documentation for rtio_log ( #206 ).
2016-02-15 21:43:02 +00:00
whitequark
3da9bfc704
doc: binutils patch is not needed any more.
2016-02-15 18:25:15 +00:00
b97be9c08d
Merge branch 'newtesting'
2016-02-14 21:30:19 +01:00
b68035d162
manual/installing: refresh
2016-02-10 23:37:21 +01:00
64263b75d0
use https for m-labs.hk
2016-02-10 17:20:29 +01:00
