cxp GW: use upconn layout

protocol: uncomment error

flake.lock

@@ -11,11 +11,11 @@
         "src-pythonparser": "src-pythonparser"
       },
       "locked": {
-        "lastModified": 1724210813,
-        "narHash": "sha256-OqQdE2lC0jKNS2fFq0Fda1nBpyT8ijmSXqdkO8xeOJ8=",
+        "lastModified": 1725373154,
+        "narHash": "sha256-fq9EW9fDWrV0v1vNj7ZqDNpNYx8+OxoFdPwpvkPf67g=",
         "ref": "refs/heads/master",
-        "rev": "61e96b37f9c4345e2d7bf71d47ba0b5e947de83e",
-        "revCount": 8985,
+        "rev": "0c1ffa9f4f6a3e7864459923ec4b9cc45f16327a",
+        "revCount": 9005,
         "type": "git",
         "url": "https://github.com/m-labs/artiq.git"
       },
@@ -102,11 +102,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1723362943,
-        "narHash": "sha256-dFZRVSgmJkyM0bkPpaYRtG/kRMRTorUIDj8BxoOt1T4=",
+        "lastModified": 1724224976,
+        "narHash": "sha256-Z/ELQhrSd7bMzTO8r7NZgi9g5emh+aRKoCdaAv5fiO0=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "a58bc8ad779655e790115244571758e8de055e3d",
+        "rev": "c374d94f1536013ca8e92341b540eba4c22f9c62",
         "type": "github"
       },
       "original": {
@@ -169,11 +169,11 @@
     "src-migen": {
       "flake": false,
       "locked": {
-        "lastModified": 1721561053,
-        "narHash": "sha256-z3LRhNmKZrjr6rFD0yxtccSa/SWvFIYmb+G/D5d2Jd8=",
+        "lastModified": 1724304798,
+        "narHash": "sha256-tQ02N0eXY5W/Z7CrOy3Cu4WjDZDQWb8hYlzsFzr3Mus=",
         "owner": "m-labs",
         "repo": "migen",
-        "rev": "9279e8623f8433bc4f23ac51e5e2331bfe544417",
+        "rev": "832a7240ba32af9cbd4fdd519ddcb4f912534726",
         "type": "github"
       },
       "original": {

flake.nix

@@ -342,6 +342,7 @@
       {
         inherit fastnumbers artiq-netboot ramda migen-axi binutils-arm;
       } //
+      (board-package-set { target = "zc706"; variant = "cxp_demo"; }) //
       (board-package-set { target = "zc706"; variant = "nist_clock"; }) //
       (board-package-set { target = "zc706"; variant = "nist_clock_master"; }) //
       (board-package-set { target = "zc706"; variant = "nist_clock_master_100mhz"; }) //

src/gateware/cxp.py

@@ -0,0 +1,89 @@
+from migen import *
+from misoc.interconnect.csr import *
+from misoc.interconnect import stream
+
+from cxp_downconn import CXP_DownConn_PHY
+from cxp_upconn import CXP_UpConn_PHY
+from cxp_pipeline import *
+
+class CXP(Module, AutoCSR):
+    def __init__(self, refclk, downconn_pads, upconn_pads, sys_clk_freq, debug_sma, pmod_pads):
+        self.submodules.upconn = UpConn_Interface(upconn_pads, sys_clk_freq, debug_sma, pmod_pads)
+
+        self.submodules.downconn = DownConn_Interface(refclk, downconn_pads, sys_clk_freq, debug_sma, pmod_pads)
+        # TODO: support the option high speed upconn
+
+        # TODO: add link layer
+
+class DownConn_Interface(Module, AutoCSR):
+    def __init__(self, refclk, downconn_pads, sys_clk_freq, debug_sma, pmod_pads):
+
+        # # #
+
+        self.submodules.phy = phy = CXP_DownConn_PHY(refclk, downconn_pads, sys_clk_freq, debug_sma, pmod_pads)
+        self.gtxs = phy.gtxs
+
+
+        
+class UpConn_Interface(Module, AutoCSR):
+    def __init__(self, upconn_pads, sys_clk_freq, debug_sma, pmod_pads):
+        self.clk_reset = CSRStorage(reset=1)
+        self.bitrate2x_enable = CSRStorage()
+        self.tx_enable = CSRStorage()
+        self.tx_busy = CSRStatus()
+
+        self.tx_testmode_en = CSRStorage()
+
+        # # #
+
+        self.submodules.phy = phy = CXP_UpConn_PHY(upconn_pads, sys_clk_freq, debug_sma, pmod_pads)
+
+        self.sync += [
+            phy.bitrate2x_enable.eq(self.bitrate2x_enable.storage),
+            phy.tx_enable.eq(self.tx_enable.storage),
+            phy.clk_reset.eq(self.clk_reset.re),
+            self.tx_busy.status.eq(phy.tx_busy),
+        ]
+
+
+        # Packet FIFOs with transmission priority
+        # 0: Trigger packet
+        self.submodules.trig = trig = TX_Trigger()
+        self.comb += trig.source.connect(phy.sinks[0])
+        
+        # DEBUG: INPUT
+        self.trig_stb = CSR()
+        self.trig_delay = CSRStorage(8) 
+        self.linktrigger = CSRStorage(2)
+
+        self.sync += [
+            trig.trig_stb.eq(self.trig_stb.re),
+            trig.delay.eq(self.trig_delay.storage),
+            trig.linktrig_mode.eq(self.linktrigger.storage),
+        ]
+
+        
+        # 1: IO acknowledgment for trigger packet
+        self.submodules.trig_ack = trig_ack = Trigger_ACK()
+        self.comb += trig_ack.source.connect(phy.sinks[1])
+
+        # DEBUG: INPUT
+        self.ack = CSR()
+        self.sync += trig_ack.ack.eq(self.ack.re),
+
+
+        # 2: All other packets
+        # Control is not timing dependent, all the link layer is done in firmware
+        self.submodules.command = command = TX_Command_Packet()
+        self.submodules.testseq = testseq = TX_Test_Packet()
+
+
+        self.submodules.mux = mux = stream.Multiplexer(upconn_layout, 2)
+
+        self.comb += [
+            command.source.connect(mux.sink0),
+            testseq.source.connect(mux.sink1),
+            mux.sel.eq(self.tx_testmode_en.storage),
+
+            mux.source.connect(phy.sinks[2])
+        ]

src/gateware/cxp_4r_fmc.py

@@ -0,0 +1,87 @@
+from migen.build.generic_platform import *
+
+fmc_adapter_io = [
+
+    # CoaXPress high speed link
+    ("CXP_HS", 0,
+        Subsignal("txp", Pins("HPC:DP0_C2M_P")),
+        Subsignal("txn", Pins("HPC:DP0_C2M_N")),
+        Subsignal("rxp", Pins("HPC:DP0_M2C_P")),
+        Subsignal("rxn", Pins("HPC:DP0_M2C_N")),
+    ),
+    ("CXP_HS", 1,
+        Subsignal("txp", Pins("HPC:DP1_C2M_P")),
+        Subsignal("txn", Pins("HPC:DP1_C2M_N")),
+        Subsignal("rxp", Pins("HPC:DP1_M2C_P")),
+        Subsignal("rxn", Pins("HPC:DP1_M2C_N")),
+    ),
+    ("CXP_HS", 2,
+        Subsignal("txp", Pins("HPC:DP2_C2M_P")),
+        Subsignal("txn", Pins("HPC:DP2_C2M_N")),
+        Subsignal("rxp", Pins("HPC:DP2_M2C_P")),
+        Subsignal("rxn", Pins("HPC:DP2_M2C_N")),
+    ),
+    ("CXP_HS", 3,
+        Subsignal("txp", Pins("HPC:DP3_C2M_P")),
+        Subsignal("txn", Pins("HPC:DP3_C2M_N")),
+        Subsignal("rxp", Pins("HPC:DP3_M2C_P")),
+        Subsignal("rxn", Pins("HPC:DP3_M2C_N")),
+    ),
+
+    # CoaXPress low speed link
+    ("CXP_LS", 0, Pins("HPC:LA00_CC_P"), IOStandard("LVCMOS33")),
+    ("CXP_LS", 1, Pins("HPC:LA01_CC_N"), IOStandard("LVCMOS33")),
+    ("CXP_LS", 2, Pins("HPC:LA01_CC_P"), IOStandard("LVCMOS33")),
+    ("CXP_LS", 3, Pins("HPC:LA02_N"), IOStandard("LVCMOS33")),
+
+    # CoaXPress green and red LED
+    ("CXP_LED", 0,
+        Subsignal("green", Pins("HPC:LA11_P"), IOStandard("LVCMOS33")),
+        Subsignal("red", Pins("HPC:LA11_N"), IOStandard("LVCMOS33")),
+    ),
+    ("CXP_LED", 1,
+        Subsignal("green", Pins("HPC:LA12_P"), IOStandard("LVCMOS33")),
+        Subsignal("red", Pins("HPC:LA12_N"), IOStandard("LVCMOS33")),
+    ),
+    ("CXP_LED", 2,
+        Subsignal("green", Pins("HPC:LA13_P"), IOStandard("LVCMOS33")),
+        Subsignal("red", Pins("HPC:LA13_N"), IOStandard("LVCMOS33")),
+    ),
+    ("CXP_LED", 3,
+        Subsignal("green", Pins("HPC:LA14_P"), IOStandard("LVCMOS33")),
+        Subsignal("red", Pins("HPC:LA14_N"), IOStandard("LVCMOS33")),
+    ),
+
+    # Power over CoaXPress 
+    ("PoCXP", 0,
+        Subsignal("enable", Pins("HPC:LA21_N"), IOStandard("LVCMOS33")),
+        Subsignal("alert", Pins("HPC:LA18_CC_P"), IOStandard("LVCMOS33")),
+    ),
+    ("PoCXP", 1,
+        Subsignal("enable", Pins("HPC:LA21_P"), IOStandard("LVCMOS33")),
+        Subsignal("alert", Pins("HPC:LA19_N"), IOStandard("LVCMOS33")),
+    ),
+    ("PoCXP", 2,
+        Subsignal("enable", Pins("HPC:LA22_N"), IOStandard("LVCMOS33")),
+        Subsignal("alert", Pins("HPC:LA19_P"), IOStandard("LVCMOS33")),
+    ),
+    ("PoCXP", 3,
+        Subsignal("enable", Pins("HPC:LA22_P"), IOStandard("LVCMOS33")),
+        Subsignal("alert", Pins("HPC:LA20_N"), IOStandard("LVCMOS33")),
+    ),
+
+    ("i2c_fmc", 0,
+        Subsignal("scl", Pins("HPC:IIC_SCL")),
+        Subsignal("sda", Pins("HPC:IIC_SDA")),
+        IOStandard("LVCMOS33")
+    ),
+
+    ("3V3", 0, Pins("HPC:PG_M2C")),
+    ("GND", 0, Pins("HPC:PRSNT_M2C_L HPC:CLK0_M2C_P")),
+    ("VADJ", 0, Pins("HPC:GBTCLK1_M2C_N CLK0_M2C_N")),
+
+    ("clk125_fmc", 0,
+        Subsignal("p", Pins("HPC:GBTCLK0_M2C_P")),
+        Subsignal("n", Pins("HPC:GBTCLK0_M2C_n")),
+    ),
+]

src/gateware/cxp_downconn.py

@@ -0,0 +1,794 @@
+from migen import *
+from migen.genlib.cdc import MultiReg
+from migen.genlib.resetsync import AsyncResetSynchronizer
+
+from misoc.cores.code_8b10b import Encoder, Decoder
+from misoc.interconnect.csr import *
+
+from artiq.gateware.drtio.transceiver.gtx_7series_init import *
+
+from functools import reduce
+from operator import add
+
+class CXP_DownConn_PHY(Module, AutoCSR):
+    def __init__(self, refclk, pads, sys_clk_freq, debug_sma, pmod_pads):
+        nconn = len(pads)
+        self.rx_start_init = CSRStorage()
+        self.rx_restart = CSR()
+
+        self.tx_start_init = CSRStorage()
+        self.tx_restart = CSR()
+        self.txenable = CSRStorage()
+
+        self.rx_ready = CSRStatus(nconn)
+
+        self.qpll_reset = CSR()
+        self.qpll_locked = CSRStatus()
+
+        self.gtxs = []
+        # # #
+
+        self.submodules.qpll = qpll = QPLL(refclk, sys_clk_freq)
+        self.sync += [
+            qpll.reset.eq(self.qpll_reset.re),
+            self.qpll_locked.status.eq(qpll.lock),
+        ]
+
+
+
+        for i in range(nconn):
+            if i != 0:
+                break
+            gtx = GTX(self.qpll, pads[i], sys_clk_freq, tx_mode="single", rx_mode="single")
+            self.gtxs.append(gtx)
+            setattr(self.submodules, "gtx"+str(i), gtx)
+
+            # TODO: add extension gtx connections
+            # TODO: add connection interface
+        
+
+        # TODO: Connect slave cxp_gtx_rx clock tgt
+        # checkout channel interfaces & drtio_gtx
+        # GTPTXPhaseAlignement for inspiration
+
+        # Connect all GTX connections' DRP
+
+        self.gtx_daddr = CSRStorage(9)
+        self.gtx_dread = CSR()
+        self.gtx_din_stb = CSR()
+        self.gtx_din = CSRStorage(16)
+
+        self.gtx_dout = CSRStatus(16)
+        self.gtx_dready = CSR()
+
+        for gtx in self.gtxs:
+            self.sync += [
+
+                gtx.txenable.eq(self.txenable.storage[0]),
+                gtx.tx_restart.eq(self.tx_restart.re),
+                gtx.rx_restart.eq(self.rx_restart.re),
+                gtx.tx_init.clk_path_ready.eq(self.tx_start_init.storage),
+                gtx.rx_init.clk_path_ready.eq(self.rx_start_init.storage),
+            ]
+
+            self.comb += gtx.dclk.eq(ClockSignal("sys"))
+            self.sync += [
+                gtx.den.eq(0),
+                gtx.dwen.eq(0),
+                If(self.gtx_dread.re,
+                    gtx.den.eq(1),
+                    gtx.daddr.eq(self.gtx_daddr.storage),
+                ).Elif(self.gtx_din_stb.re,
+                    gtx.den.eq(1),
+                    gtx.dwen.eq(1),
+                    gtx.daddr.eq(self.gtx_daddr.storage),
+                    gtx.din.eq(self.gtx_din.storage),
+                ),
+            ]
+
+        # TODO: deal with 4 GTX instance of outpus
+        for n, gtx in enumerate(self.gtxs):
+            self.sync += [
+                self.rx_ready.status[n].eq(gtx.rx_ready),
+                If(gtx.dready,
+                   self.gtx_dready.w.eq(1),
+                   self.gtx_dout.status.eq(gtx.dout),
+                ),
+                If(self.gtx_dready.re,
+                   self.gtx_dready.w.eq(0),
+                ),
+            ]
+
+
+
+
+        # DEBUG: txusrclk PLL DRG
+        
+        self.txpll_reset = CSRStorage()
+        self.pll_daddr = CSRStorage(7)
+        self.pll_dclk = CSRStorage()
+        self.pll_den = CSRStorage()
+        self.pll_din = CSRStorage(16)
+        self.pll_dwen = CSRStorage()
+
+        self.txpll_locked = CSRStatus()
+        self.pll_dout = CSRStatus(16)
+        self.pll_dready = CSRStatus()
+
+        self.txinit_phaligndone = CSRStatus()
+        self.rxinit_phaligndone = CSRStatus()
+
+        for n, gtx in enumerate(self.gtxs):
+            self.comb += [
+                gtx.txpll_reset.eq(self.txpll_reset.storage),
+                gtx.pll_daddr.eq(self.pll_daddr.storage),
+                gtx.pll_dclk.eq(self.pll_dclk.storage),
+                gtx.pll_den.eq(self.pll_den.storage),
+                gtx.pll_din.eq(self.pll_din.storage),
+                gtx.pll_dwen.eq(self.pll_dwen.storage),
+
+                self.txinit_phaligndone.status.eq(gtx.tx_init.Xxphaligndone),
+                self.rxinit_phaligndone.status.eq(gtx.rx_init.Xxphaligndone), self.txpll_locked.status.eq(gtx.txpll_locked),
+                self.pll_dout.status.eq(gtx.pll_dout),
+                self.pll_dready.status.eq(gtx.pll_dready),
+            ]
+
+            # DEBUG:loopback 
+            self.loopback_mode = CSRStorage(3)
+            self.comb += gtx.loopback_mode.eq(self.loopback_mode.storage) 
+
+            # DEBUG: IO SMA & PMOD
+            if n == 0:
+                self.specials += [
+                    # Instance("OBUF", i_I=gtx.cd_cxp_gtx_rx.clk, o_O=debug_sma.p_tx),
+                    # Instance("OBUF", i_I=gtx.cd_cxp_gtx_tx.clk, o_O=debug_sma.n_rx),
+
+                    # # pmod 0-7 pin
+                    # Instance("OBUF", i_I=gtx.comma_checker.comma_aligned, o_O=pmod_pads[0]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.comma_det, o_O=pmod_pads[1]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.restart_sys, o_O=pmod_pads[2]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.aligner_en, o_O=pmod_pads[3]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.check_reset, o_O=pmod_pads[4]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.has_comma, o_O=pmod_pads[5]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.has_error, o_O=pmod_pads[6]),
+                    # Instance("OBUF", i_I=gtx.comma_checker.ready_sys, o_O=pmod_pads[7]),
+
+                    # Instance("OBUF", i_I=gtx.dclk, o_O=pmod_pads[0]),
+                    # Instance("OBUF", i_I=gtx.den, o_O=pmod_pads[1]),
+                    # Instance("OBUF", i_I=gtx.dwen, o_O=pmod_pads[2]),
+                    # Instance("OBUF", i_I=gtx.dready, o_O=pmod_pads[3]),
+                ]
+
+            # DEBUG: datain
+
+        
+            self.sync.cxp_gtx_tx += [
+                gtx.encoder.d[0].eq(0xBC),
+                gtx.encoder.k[0].eq(1),
+                gtx.encoder.d[1].eq(0x3C),
+                gtx.encoder.k[1].eq(1),
+                gtx.encoder.d[2].eq(0x3C),
+                gtx.encoder.k[2].eq(1),
+                gtx.encoder.d[3].eq(0xB5),
+                gtx.encoder.k[3].eq(0),
+            ]
+
+            for i in range(4):
+                gtx.decoders[i].input.attr.add("no_retiming")
+                gtx.decoders[i].d.attr.add("no_retiming")
+                gtx.decoders[i].k.attr.add("no_retiming")
+
+                rxdata_name = "rxdata_" + str(i)
+                rxdata_csr = CSRStatus(10, name=rxdata_name)
+                setattr(self, rxdata_name, rxdata_csr)
+
+                decoded_name = "decoded_data_" + str(i)
+                decoded_csr = CSRStatus(8, name=decoded_name)
+                setattr(self, decoded_name, decoded_csr)
+
+                k_name = "rxdata_" + str(i)
+                k_csr = CSRStatus(1, name=k_name)
+                setattr(self, k_name, k_csr)
+
+                self.sync.cxp_gtx_rx += [
+                    rxdata_csr.status.eq(gtx.decoders[i].input),
+                    decoded_csr.status.eq(gtx.decoders[i].d),
+                    k_csr.status.eq(gtx.decoders[i].k),
+                ]
+
+class QPLL(Module, AutoCSR):
+    def __init__(self, refclk, sys_clk_freq):
+        self.clk = Signal()
+        self.refclk = Signal()
+        self.lock = Signal()
+        self.reset = Signal()
+
+        self.daddr = CSRStorage(8)
+        self.dread = CSR()
+        self.din_stb = CSR()
+        self.din = CSRStorage(16)
+
+        self.dout = CSRStatus(16)
+        self.dready = CSR()
+
+        # # #
+
+        # VCO @ 10GHz, linerate = 1.25Gbps
+        # feedback divider = 80
+        qpll_fbdiv = 0b0100100000
+        qpll_fbdiv_ratio = 1
+        refclk_div = 1
+        self.Xxout_div = 8
+
+        # DEBUG: txuserclk
+        fbdiv_real = 80
+        self.tx_usrclk_freq = (sys_clk_freq*fbdiv_real/self.Xxout_div)/40
+        
+        dready = Signal()
+        self.specials += [
+            Instance("GTXE2_COMMON",
+                i_QPLLREFCLKSEL=0b001,
+                i_GTREFCLK0=refclk,         
+
+                i_QPLLPD=0,
+                i_QPLLRESET=self.reset,
+                i_QPLLLOCKEN=1,
+                o_QPLLLOCK=self.lock,
+                o_QPLLOUTCLK=self.clk,
+                o_QPLLOUTREFCLK=self.refclk,
+
+                # See UG476 (v1.12.1) Table 2-16
+                p_QPLL_FBDIV=qpll_fbdiv,
+                p_QPLL_FBDIV_RATIO=qpll_fbdiv_ratio,
+                p_QPLL_REFCLK_DIV=refclk_div,
+
+                # From 7 Series FPGAs Transceivers Wizard
+                p_BIAS_CFG=0x0000040000001000,
+                p_COMMON_CFG=0x00000000,
+                p_QPLL_CFG=0x0680181,
+                p_QPLL_CLKOUT_CFG=0b0000,
+                p_QPLL_COARSE_FREQ_OVRD=0b010000,
+                p_QPLL_COARSE_FREQ_OVRD_EN=0b0,
+                p_QPLL_CP=0b0000011111,
+                p_QPLL_CP_MONITOR_EN=0b0,
+                p_QPLL_DMONITOR_SEL=0b0,
+                p_QPLL_FBDIV_MONITOR_EN= 0b0,
+                p_QPLL_INIT_CFG=0x000006,
+                p_QPLL_LOCK_CFG=0x21E8,
+                p_QPLL_LPF=0b1111,
+             
+                # Reserved, values cannot be modified
+                i_BGBYPASSB=0b1,
+                i_BGMONITORENB=0b1,
+                i_BGPDB=0b1,
+                i_BGRCALOVRD=0b11111,
+                i_RCALENB=0b1,
+                i_QPLLRSVD1=0b0,
+                i_QPLLRSVD2=0b11111,
+
+                # Dynamic Reconfiguration Ports
+                i_DRPADDR=self.daddr.storage,
+                i_DRPCLK=ClockSignal("sys"),
+                i_DRPEN=(self.dread.re | self.din_stb.re),
+                i_DRPWE=self.din_stb.re,
+                i_DRPDI=self.din.storage,
+                o_DRPDO=self.dout.status,
+                o_DRPRDY=dready,
+            )
+        ]
+
+        self.sync += [
+            If(dready,
+               self.dready.w.eq(1),
+            ),
+            If(self.dready.re,
+               self.dready.w.eq(0),
+            ),
+        ]
+
+# Warning: Xilinx transceivers are LSB first, and comma needs to be flipped
+# compared to the usual 8b10b binary representation.
+class Comma_Checker(Module):
+    def __init__(self, comma, reset_period=10_000_000):
+        self.data = Signal(20)
+        self.comma_aligned = Signal()
+        self.comma_realigned = Signal()
+        self.comma_det = Signal()
+
+        self.aligner_en = Signal()
+        self.ready_sys = Signal()
+        self.restart_sys = Signal()
+
+        # # #
+
+
+        # periodically reset rx until rx is connected and receiving valid data
+        # as after connecting RXP/RXN, the whole RX need to be reset 
+        
+        reset_counter = Signal(reset=reset_period-1, max=reset_period)
+        self.sync += [
+            self.restart_sys.eq(0),
+            If(~self.ready_sys,
+                If(reset_counter == 0,
+                    reset_counter.eq(reset_counter.reset),
+                    self.restart_sys.eq(1),
+                ).Else(
+                    reset_counter.eq(reset_counter - 1),
+                )
+            )
+        ]
+
+
+        # Data and comma checker
+        # From UG476 (v1.12.1) p.228
+        # The built-in RXBYTEISALIGNED can be falsely asserted at linerate higher than 5Gbps
+        # The validity of data and comma needed to be checked externally
+
+        comma_n = ~comma & 0b1111111111
+
+        # DEBUG: remove after use
+        self.has_comma = Signal()
+        self.has_error = Signal()
+
+        comma_seen = Signal()
+        error_seen = Signal()
+        one_counts = Signal(max=11)
+
+        # From CXP-001-2021 section 9.2.5.1
+        # For high speed connection an IDLE word shall be transmitted at least once every 100 words
+        counter_period = 200
+
+        counter = Signal(reset=counter_period-1, max=counter_period)
+        check_reset = Signal()
+        check = Signal()
+
+        self.sync.cxp_gtx_rx += [
+            If(check_reset,
+                counter.eq(counter.reset),   
+                check.eq(0),
+            ).Elif(counter == 0,
+                check.eq(1),
+            ).Else(
+                counter.eq(counter - 1),   
+            ),
+
+            If(check_reset,
+                comma_seen.eq(0),
+            ).Elif((self.data[:10] == comma) | (self.data[:10] == comma_n),
+                comma_seen.eq(1)
+            ),
+
+            one_counts.eq(reduce(add, [self.data[i] for i in range(10)])),
+            If(check_reset,
+                error_seen.eq(0),
+            ).Elif((one_counts != 4) & (one_counts != 5) & (one_counts != 6),
+                error_seen.eq(1),
+            ),
+
+            # DEBUG: 
+            self.has_comma.eq(0),
+            If((self.data[:10] == comma) | (self.data[:10] == comma_n),
+               self.has_comma.eq(1),
+            ),
+
+            self.has_error.eq(0),
+            If((one_counts != 4) & (one_counts != 5) & (one_counts != 6),
+                self.has_error.eq(1),
+            ),
+        ]
+
+        # DEBUG: expose signal
+        self.check_reset = Signal()
+        self.comb +=[
+            self.check_reset.eq(check_reset),
+        ]
+
+        self.submodules.rxfsm = rxfsm = ClockDomainsRenamer("cxp_gtx_rx")(FSM(reset_state="WAIT_COMMA"))
+
+        rxfsm.act("WAIT_COMMA",
+            If(self.comma_det,
+                NextState("ALIGNING"),
+            )
+        )
+
+        rxfsm.act("ALIGNING",
+            If(self.comma_aligned & (~self.comma_realigned),
+                NextState("WAIT_ALIGNED_DATA"),               
+            ).Else(
+                self.aligner_en.eq(1),
+            )
+        )
+
+        # wait for the aligned data to arrive at the FPGA RX interface 
+        # as there is a delay before the data is avaiable after RXBYTEISALIGNED is asserted
+        self.submodules.timer = timer = ClockDomainsRenamer("cxp_gtx_rx")(WaitTimer(10_000))
+
+        rxfsm.act("WAIT_ALIGNED_DATA",
+            timer.wait.eq(1),
+            If(timer.done,
+                check_reset.eq(1),
+                NextState("CHECKING"),
+            )
+        )
+
+        rxfsm.act("CHECKING",
+            If(check,
+                check_reset.eq(1),
+                If(comma_seen & (~error_seen),
+                    NextState("READY"),
+                ).Else(
+                    NextState("WAIT_COMMA")
+                )
+            )
+        )
+
+        ready = Signal()
+        self.specials += MultiReg(ready, self.ready_sys)
+        rxfsm.act("READY",
+            ready.eq(1),
+            If(check,
+                check_reset.eq(1),
+                If(~(comma_seen & (~error_seen)),
+                    NextState("WAIT_COMMA"),
+                )
+            )
+        )
+
+
+class GTX(Module):
+    # Settings:
+    # * GTX reference clock @ 125MHz
+    # * GTX data width = 20
+    # * GTX PLL frequency @ 3.125GHz
+    # * GTX line rate (TX & RX) @ 3.125Gb/s
+    # * GTX TX/RX USRCLK @ PLL/datawidth = 156MHz
+    def __init__(self, qpll, pads, sys_clk_freq, tx_mode="single", rx_mode="single"):
+        assert tx_mode in ["single", "master", "slave"]
+        assert rx_mode in ["single", "master", "slave"]
+
+        # linerate = USRCLK * datawidth
+        pll_fbout_mult = 8
+        txusr_pll_div = pll_fbout_mult*sys_clk_freq/qpll.tx_usrclk_freq
+
+        self.tx_restart = Signal()
+        self.rx_restart = Signal()
+        self.loopback_mode = Signal(3)
+
+        self.txenable = Signal()
+        self.rx_ready = Signal()
+
+        # Dynamic Reconfiguration Ports
+        self.daddr = Signal(9)
+        self.dclk = Signal()
+        self.den = Signal()
+        self.dwen = Signal()
+        self.din = Signal(16)
+        self.dout = Signal(16)
+        self.dready = Signal()
+
+        self.submodules.encoder = ClockDomainsRenamer("cxp_gtx_tx")(Encoder(4, True))
+        self.submodules.decoders = [ClockDomainsRenamer("cxp_gtx_rx")(
+            (Decoder(True))) for _ in range(4)]
+
+
+        # transceiver direct clock outputs
+        # useful to specify clock constraints in a way palatable to Vivado
+        self.txoutclk = Signal()
+        self.rxoutclk = Signal()
+
+        # # #
+
+        # TX generates cxp_tx clock, init must be in system domain
+        # FIXME: 500e6 is used to fix Xx reset by holding gtxXxreset for a couple cycle more
+        self.submodules.tx_init = tx_init = GTXInit(500e6, False, mode=tx_mode)
+        self.submodules.rx_init = rx_init = GTXInit(sys_clk_freq, True, mode=rx_mode)
+
+        # RX receives restart commands from txusrclk domain
+        # self.submodules.rx_init = rx_init = ClockDomainsRenamer("cxp_gtx_tx")(GTXInit(500e6, True, mode=rx_mode))
+
+        self.comb += [
+            tx_init.cplllock.eq(qpll.lock),
+            rx_init.cplllock.eq(qpll.lock)
+        ]
+
+        txdata = Signal(40)
+        rxdata = Signal(40)
+
+        comma_aligned = Signal()
+        comma_realigned = Signal()
+        comma_det = Signal()
+        comma_aligner_en = Signal()
+        # Note: the following parameters were set after consulting AR45360
+        self.specials += \
+            Instance("GTXE2_CHANNEL",
+                # PMA Attributes
+                p_PMA_RSV=0x001E7080,
+                p_PMA_RSV2=0x2050,              # PMA_RSV2[5] = 0: Eye scan feature disabled
+                p_PMA_RSV3=0,
+                p_PMA_RSV4=1,                   # PMA_RSV[4],RX_CM_TRIM[2:0] = 0b1010: Common mode 800mV
+                p_RX_BIAS_CFG=0b000000000100,
+                p_RX_OS_CFG=0b0000010000000,
+                p_RX_CLK25_DIV=5,
+                p_TX_CLK25_DIV=5,
+
+                # Power-Down Attributes
+                p_PD_TRANS_TIME_FROM_P2=0x3c,
+                p_PD_TRANS_TIME_NONE_P2=0x3c,
+                p_PD_TRANS_TIME_TO_P2=0x64,
+                i_CPLLPD=1,
+
+                # QPLL
+                i_QPLLCLK=qpll.clk,
+                i_QPLLREFCLK=qpll.refclk,
+                p_RXOUT_DIV=qpll.Xxout_div,
+                p_TXOUT_DIV=qpll.Xxout_div,
+                i_RXSYSCLKSEL=0b11, # use QPLL & QPLL's REFCLK
+                i_TXSYSCLKSEL=0b11, # use QPLL & CPLL's REFCLK
+
+                # TX clock
+                p_TXBUF_EN="FALSE",
+                p_TX_XCLK_SEL="TXUSR",
+                o_TXOUTCLK=self.txoutclk,
+                # i_TXSYSCLKSEL=0b00,
+                i_TXOUTCLKSEL=0b11,
+
+                # TX Startup/Reset
+                i_TXPHDLYRESET=0,
+                i_TXDLYBYPASS=0,
+                i_TXPHALIGNEN=1 if tx_mode != "single" else 0,
+                i_GTTXRESET=tx_init.gtXxreset,
+                o_TXRESETDONE=tx_init.Xxresetdone,
+                i_TXDLYSRESET=tx_init.Xxdlysreset,
+                o_TXDLYSRESETDONE=tx_init.Xxdlysresetdone,
+                i_TXPHINIT=tx_init.txphinit if tx_mode != "single" else 0,
+                o_TXPHINITDONE=tx_init.txphinitdone if tx_mode != "single" else Signal(),
+                i_TXPHALIGN=tx_init.Xxphalign if tx_mode != "single" else 0,
+                i_TXDLYEN=tx_init.Xxdlyen if tx_mode != "single" else 0,
+                o_TXPHALIGNDONE=tx_init.Xxphaligndone,
+                i_TXUSERRDY=tx_init.Xxuserrdy,
+                p_TXPMARESET_TIME=1,
+                p_TXPCSRESET_TIME=1,
+                i_TXINHIBIT=~self.txenable,
+
+                # TX data
+                p_TX_DATA_WIDTH=40,
+                p_TX_INT_DATAWIDTH=1, # 1 if a line rate is greater than 6.6 Gbps
+                i_TXCHARDISPMODE=Cat(txdata[9], txdata[19], txdata[29], txdata[39]),
+                i_TXCHARDISPVAL=Cat(txdata[8], txdata[18], txdata[28], txdata[38]),
+                i_TXDATA=Cat(txdata[:8], txdata[10:18], txdata[20:28], txdata[30:38]),
+                i_TXUSRCLK=ClockSignal("cxp_gtx_tx"),
+                i_TXUSRCLK2=ClockSignal("cxp_gtx_tx"),
+
+                # TX electrical
+                i_TXBUFDIFFCTRL=0b100,
+                i_TXDIFFCTRL=0b1000,
+
+                # RX Startup/Reset
+                i_RXPHDLYRESET=0,
+                i_RXDLYBYPASS=0,
+                i_RXPHALIGNEN=1 if rx_mode != "single" else 0,
+                i_GTRXRESET=rx_init.gtXxreset,
+                o_RXRESETDONE=rx_init.Xxresetdone,
+                i_RXDLYSRESET=rx_init.Xxdlysreset,
+                o_RXDLYSRESETDONE=rx_init.Xxdlysresetdone,
+                i_RXPHALIGN=rx_init.Xxphalign if rx_mode != "single" else 0,
+                i_RXDLYEN=rx_init.Xxdlyen if rx_mode != "single" else 0,
+                o_RXPHALIGNDONE=rx_init.Xxphaligndone,
+                i_RXUSERRDY=rx_init.Xxuserrdy,
+                p_RXPMARESET_TIME=1,
+                p_RXPCSRESET_TIME=1,
+
+                # RX AFE
+                p_RX_DFE_XYD_CFG=0,
+                p_RX_CM_SEL=0b11,               # RX_CM_SEL = 0b11: Common mode is programmable
+                p_RX_CM_TRIM=0b010,             # PMA_RSV[4],RX_CM_TRIM[2:0] = 0b1010: Common mode 800mV
+                i_RXDFEXYDEN=1,
+                i_RXDFEXYDHOLD=0,
+                i_RXDFEXYDOVRDEN=0,
+                i_RXLPMEN=1,                    # RXLPMEN = 1: LPM mode is enable for non scramble 8b10b data
+                p_RXLPM_HF_CFG=0b00000011110000,
+                p_RXLPM_LF_CFG=0b00000011110000,
+
+                p_RX_DFE_GAIN_CFG=0x0207EA,
+                p_RX_DFE_VP_CFG=0b00011111100000011,
+                p_RX_DFE_UT_CFG=0b10001000000000000,
+                p_RX_DFE_KL_CFG=0b0000011111110,
+                p_RX_DFE_KL_CFG2=0x3788140A,
+                p_RX_DFE_H2_CFG=0b000110000000,
+                p_RX_DFE_H3_CFG=0b000110000000,
+                p_RX_DFE_H4_CFG=0b00011100000,
+                p_RX_DFE_H5_CFG=0b00011100000,
+                p_RX_DFE_LPM_CFG=0x0904,        # RX_DFE_LPM_CFG = 0x0904: linerate <= 6.6Gb/s
+                                                #                = 0x0104: linerate > 6.6Gb/s
+
+                # RX clock
+                i_RXDDIEN=1,
+                # i_RXSYSCLKSEL=0b00,
+                i_RXOUTCLKSEL=0b010,
+                o_RXOUTCLK=self.rxoutclk,
+                i_RXUSRCLK=ClockSignal("cxp_gtx_rx"),
+                i_RXUSRCLK2=ClockSignal("cxp_gtx_rx"),
+
+                # RX Clock Correction Attributes
+                p_CLK_CORRECT_USE="FALSE",
+                p_CLK_COR_SEQ_1_1=0b0100000000,
+                p_CLK_COR_SEQ_2_1=0b0100000000,
+                p_CLK_COR_SEQ_1_ENABLE=0b1111,
+                p_CLK_COR_SEQ_2_ENABLE=0b1111,
+
+                # RX data
+                p_RX_DATA_WIDTH=40,
+                p_RX_INT_DATAWIDTH=1,   # 1 if a line rate is greater than 6.6 Gbps
+                o_RXDISPERR=Cat(rxdata[9], rxdata[19], rxdata[29], rxdata[39]),
+                o_RXCHARISK=Cat(rxdata[8], rxdata[18], rxdata[28], rxdata[38]),
+                o_RXDATA=Cat(rxdata[:8], rxdata[10:18], rxdata[20:28], rxdata[30:38]),
+
+                # RX Byte and Word Alignment Attributes
+                p_ALIGN_COMMA_DOUBLE="FALSE",
+                p_ALIGN_COMMA_ENABLE=0b1111111111,
+                p_ALIGN_COMMA_WORD=4, # align comma to rxdata[:10] only
+                p_ALIGN_MCOMMA_DET="TRUE",
+                p_ALIGN_MCOMMA_VALUE=0b1010000011,
+                p_ALIGN_PCOMMA_DET="TRUE",
+                p_ALIGN_PCOMMA_VALUE=0b0101111100,
+                p_SHOW_REALIGN_COMMA="FALSE",
+                p_RXSLIDE_AUTO_WAIT=7,
+                p_RXSLIDE_MODE="OFF",
+                p_RX_SIG_VALID_DLY=10,
+                i_RXPCOMMAALIGNEN=comma_aligner_en,
+                i_RXMCOMMAALIGNEN=comma_aligner_en,
+                i_RXCOMMADETEN=1,
+                i_RXSLIDE=0,
+                o_RXBYTEISALIGNED=comma_aligned,
+                o_RXBYTEREALIGN=comma_realigned,
+                o_RXCOMMADET=comma_det,
+
+                # RX 8B/10B Decoder Attributes
+                p_RX_DISPERR_SEQ_MATCH="FALSE",
+                p_DEC_MCOMMA_DETECT="TRUE",
+                p_DEC_PCOMMA_DETECT="TRUE",
+                p_DEC_VALID_COMMA_ONLY="FALSE",
+
+                # RX Buffer Attributes
+                p_RXBUF_ADDR_MODE="FAST",
+                p_RXBUF_EIDLE_HI_CNT=0b1000,
+                p_RXBUF_EIDLE_LO_CNT=0b0000,
+                p_RXBUF_EN="FALSE",
+                p_RX_BUFFER_CFG=0b000000,
+                p_RXBUF_RESET_ON_CB_CHANGE="TRUE",
+                p_RXBUF_RESET_ON_COMMAALIGN="FALSE",
+                p_RXBUF_RESET_ON_EIDLE="FALSE",     # RXBUF_RESET_ON_EIDLE = FALSE: OOB is disabled
+                p_RXBUF_RESET_ON_RATE_CHANGE="TRUE",
+                p_RXBUFRESET_TIME=0b00001,
+                p_RXBUF_THRESH_OVFLW=61,
+                p_RXBUF_THRESH_OVRD="FALSE",
+                p_RXBUF_THRESH_UNDFLW=4,
+                p_RXDLY_CFG=0x001F,
+                p_RXDLY_LCFG=0x030,
+                p_RXDLY_TAP_CFG=0x0000,
+                p_RXPH_CFG=0xC00002,
+                p_RXPHDLY_CFG=0x084020,
+                p_RXPH_MONITOR_SEL=0b00000,
+                p_RX_XCLK_SEL="RXUSR",
+                p_RX_DDI_SEL=0b000000,
+                p_RX_DEFER_RESET_BUF_EN="TRUE",
+
+                # CDR Attributes
+                p_RXCDR_CFG=0x03_0000_23FF_1008_0020,   # LPM @ 0.5G-1.5625G , 8B/10B encoded data, CDR setting < +/- 200ppm
+                                                        # (See UG476 (v1.12.1), p.206)
+                p_RXCDR_FR_RESET_ON_EIDLE=0b0,
+                p_RXCDR_HOLD_DURING_EIDLE=0b0,
+                p_RXCDR_PH_RESET_ON_EIDLE=0b0,
+                p_RXCDR_LOCK_CFG=0b010101,
+
+                # Pads
+                i_GTXRXP=pads.rxp,
+                i_GTXRXN=pads.rxn,
+                o_GTXTXP=pads.txp,
+                o_GTXTXN=pads.txn,
+
+                # Dynamic Reconfiguration Ports
+                p_IS_DRPCLK_INVERTED=0b0,
+                i_DRPADDR=self.daddr,
+                i_DRPCLK=self.dclk,
+                i_DRPEN=self.den,
+                i_DRPWE=self.dwen,
+                i_DRPDI=self.din,
+                o_DRPDO=self.dout,
+                o_DRPRDY=self.dready,
+
+                # ! loopback for debugging
+                i_LOOPBACK = self.loopback_mode,
+                p_TX_LOOPBACK_DRIVE_HIZ = "FALSE",
+                p_RXPRBS_ERR_LOOPBACK = 0b0,
+
+                # Other parameters
+                p_PCS_RSVD_ATTR=(
+                    (tx_mode != "single") << 1 |    # PCS_RSVD_ATTR[1] = 0: TX Single Lane Auto Mode
+                                                    #                  = 1: TX Manual Mode
+                    (rx_mode != "single") << 2 |    #              [2] = 0: RX Single Lane Auto Mode
+                                                    #                  = 1: RX Manual Mode
+                    0 << 8                          #              [8] = 0: OOB is disabled
+                ),
+                i_RXELECIDLEMODE=0b11,              # RXELECIDLEMODE = 0b11: OOB is disabled
+                p_RX_DFE_LPM_HOLD_DURING_EIDLE=0b0,
+                p_ES_EYE_SCAN_EN="TRUE",            # Must be TRUE for GTX
+            )
+
+
+        # TX clocking
+        # A PLL is used to generate the correct frequency for TXUSRCLK (UG476 Equation 3-1)
+        self.clock_domains.cd_cxp_gtx_tx = ClockDomain()
+        txpll_fb_clk = Signal()
+        txoutclk_buf = Signal()
+        txpll_clkout = Signal()
+
+        self.txpll_reset = Signal()
+        self.pll_daddr = Signal(7)
+        self.pll_dclk = Signal()
+        self.pll_den = Signal()
+        self.pll_din = Signal(16)
+        self.pll_dwen = Signal()
+
+        self.txpll_locked = Signal()
+        self.pll_dout = Signal(16)
+        self.pll_dready = Signal()
+        self.specials += [
+            Instance("PLLE2_ADV",
+                p_BANDWIDTH="HIGH",
+                o_LOCKED=self.txpll_locked,
+                i_RST=self.txpll_reset,
+                
+                p_CLKIN1_PERIOD=1e9/sys_clk_freq, # ns
+                i_CLKIN1=txoutclk_buf,
+
+                # VCO @ 1.25GHz 
+                p_CLKFBOUT_MULT=pll_fbout_mult, p_DIVCLK_DIVIDE=1,
+                i_CLKFBIN=txpll_fb_clk, o_CLKFBOUT=txpll_fb_clk, 
+
+                # frequency = linerate/40
+                p_CLKOUT0_DIVIDE=txusr_pll_div, p_CLKOUT0_PHASE=0.0, o_CLKOUT0=txpll_clkout,
+
+                # Dynamic Reconfiguration Ports
+                i_DADDR = self.pll_daddr,
+                i_DCLK = self.pll_dclk,
+                i_DEN = self.pll_den,
+                i_DI = self.pll_din,
+                i_DWE = self.pll_dwen,
+                o_DO = self.pll_dout,
+                o_DRDY = self.pll_dready,
+            ),
+            Instance("BUFG", i_I=self.txoutclk, o_O=txoutclk_buf),
+            Instance("BUFG", i_I=txpll_clkout, o_O=self.cd_cxp_gtx_tx.clk),
+            AsyncResetSynchronizer(self.cd_cxp_gtx_tx, ~self.txpll_locked & ~tx_init.done)
+        ]
+
+        # RX clocking
+        # the CDR matches the required frequency for RXUSRCLK, no need for PLL 
+        self.clock_domains.cd_cxp_gtx_rx = ClockDomain()
+        self.specials += [
+            Instance("BUFG", i_I=self.rxoutclk, o_O=self.cd_cxp_gtx_rx.clk),
+            AsyncResetSynchronizer(self.cd_cxp_gtx_rx, ~rx_init.done)
+        ]
+
+        self.comb += [
+            txdata.eq(Cat(self.encoder.output[0], self.encoder.output[1], self.encoder.output[2], self.encoder.output[3])),
+            self.decoders[0].input.eq(rxdata[:10]),
+            self.decoders[1].input.eq(rxdata[10:20]),
+            self.decoders[2].input.eq(rxdata[20:30]),
+            self.decoders[3].input.eq(rxdata[30:]),
+        ]
+
+
+        self.submodules.comma_checker = comma_checker = Comma_Checker(0b0101111100)
+        self.comb += [
+            comma_checker.data.eq(rxdata),
+            comma_checker.comma_aligned.eq(comma_aligned),
+            comma_checker.comma_realigned.eq(comma_realigned),
+            comma_checker.comma_det.eq(comma_det),
+            comma_aligner_en.eq(comma_checker.aligner_en),
+            self.rx_ready.eq(comma_checker.ready_sys),
+
+            rx_init.restart.eq(self.rx_restart | comma_checker.restart_sys),
+            tx_init.restart.eq(self.tx_restart),
+        ]

src/gateware/cxp_pipeline.py

@@ -0,0 +1,348 @@
+from migen import *
+from misoc.interconnect.csr import *
+from misoc.interconnect import stream
+from misoc.cores.liteeth_mini.mac.crc import LiteEthMACCRCEngine, LiteEthMACCRCChecker
+
+upconn_dw = 8
+upconn_layout = [("data", upconn_dw), ("k", upconn_dw//8)]
+
+
+
+def K(x, y):
+    return ((y << 5) | x)
+
+class Code_Source(Module):
+    def __init__(self, layout, counts=4):
+
+        self.source = stream.Endpoint(layout)
+        self.stb = Signal()
+        self.data = Signal.like(self.source.data)
+        self.k = Signal.like(self.source.k)
+
+        # # #
+
+        cnt = Signal(max=counts)
+        clr_cnt = Signal()
+        inc_cnt = Signal()
+
+        self.sync += [
+            If(clr_cnt,
+                cnt.eq(cnt.reset),
+            ).Elif(inc_cnt,
+                cnt.eq(cnt + 1),
+            )
+        ]
+
+        self.submodules.fsm = fsm = FSM(reset_state="IDLE")
+        
+        fsm.act("IDLE",
+            clr_cnt.eq(1),
+            If(self.stb,
+               NextState("WRITE")
+            )
+        )
+
+        fsm.act("WRITE",
+            self.source.stb.eq(1),
+            self.source.data.eq(self.data),
+            self.source.k.eq(self.k),
+            If(cnt == counts - 1,
+                self.source.eop.eq(1),
+                If(self.source.ack, NextState("IDLE"))
+            ).Else(
+                inc_cnt.eq(self.source.ack)
+            )
+        )
+
+
+class Code_Inserter(Module):
+    def __init__(self, layout, insert_infront=True, counts=4):
+        self.sink = stream.Endpoint(layout)
+        self.source = stream.Endpoint(layout)
+
+        self.data = Signal.like(self.sink.data)
+        self.k = Signal.like(self.sink.k)
+
+        # # #
+        assert counts > 0
+
+        cnt = Signal() if counts == 1 else Signal(max=counts)
+        clr_cnt = Signal()
+        inc_cnt = Signal()
+
+        self.sync += [
+            If(clr_cnt,
+                cnt.eq(cnt.reset),
+            ).Elif(inc_cnt,
+                cnt.eq(cnt + 1),
+            )
+        ]
+
+        self.submodules.fsm = fsm = FSM(reset_state="IDLE")
+
+        if insert_infront:
+            fsm.act("IDLE",
+                self.sink.ack.eq(1),
+                clr_cnt.eq(1),
+                If(self.sink.stb,
+                    self.sink.ack.eq(0),
+                    NextState("INSERT"),
+                )
+            )
+
+            fsm.act("INSERT",
+                self.sink.ack.eq(0),
+                self.source.stb.eq(1),
+                self.source.data.eq(self.data),
+                self.source.k.eq(self.k),
+                If(cnt == counts - 1,
+                    If(self.source.ack, NextState("COPY"))
+                ).Else(
+                    inc_cnt.eq(self.source.ack)
+                )
+            )
+
+            fsm.act("COPY",
+                self.sink.connect(self.source),
+                If(self.sink.stb & self.sink.eop & self.source.ack,
+                    NextState("IDLE"),
+                )
+            )
+
+        else:
+            fsm.act("IDLE",
+                self.sink.ack.eq(1),
+                clr_cnt.eq(1),
+                If(self.sink.stb,
+                    self.sink.ack.eq(0),
+                    NextState("COPY"),
+                )
+            )
+
+            fsm.act("COPY",
+                self.sink.connect(self.source),
+                self.source.eop.eq(0),
+                If(self.sink.stb & self.sink.eop & self.source.ack,
+                    NextState("INSERT"),
+                )
+            )
+
+            fsm.act("INSERT",
+                self.sink.ack.eq(0),
+                self.source.stb.eq(1),
+                self.source.data.eq(self.data),
+                self.source.k.eq(self.k),
+                If(cnt == counts - 1,
+                    self.source.eop.eq(1),
+                    If(self.source.ack, NextState("IDLE"))
+                ).Else(
+                    inc_cnt.eq(self.source.ack)
+                ),
+            )
+
+
+class Packet_Wrapper(Module):
+    def __init__(self, layout):
+        self.submodules.pak_start = pak_start = Code_Inserter(layout) 
+        self.submodules.pak_end = pak_end = Code_Inserter(layout, insert_infront=False) 
+
+        self.sink = pak_start.sink
+        self.source = pak_end.source
+
+        self.comb += [
+            pak_start.data.eq(K(27, 7)),
+            pak_start.k.eq(1),
+            pak_end.data.eq(K(29, 7)),
+            pak_end.k.eq(1),
+
+            pak_start.source.connect(pak_end.sink),
+        ]
+        
+@ResetInserter()
+@CEInserter()
+class CXPCRC32(Module):
+    # Section 9.2.2.2 (CXP-001-2021)
+    width = 32
+    polynom = 0x04C11DB7
+    seed = 2**width-1
+    check = 0x00000000
+    def __init__(self, data_width):
+        self.data = Signal(data_width)
+        self.value = Signal(self.width)
+        self.error = Signal()
+
+        # # #
+
+        self.submodules.engine = LiteEthMACCRCEngine(data_width, self.width, self.polynom)
+        reg = Signal(self.width, reset=self.seed)
+        self.sync += reg.eq(self.engine.next)
+        self.comb += [
+            self.engine.data.eq(self.data),
+            self.engine.last.eq(reg),
+
+            self.value.eq(reg[::-1]),
+            self.error.eq(self.engine.next != self.check)
+        ]
+
+class CXPCRC32Checker(LiteEthMACCRCChecker):
+    def __init__(self, layout):
+        LiteEthMACCRCChecker.__init__(self, CXPCRC32, layout)
+
+class TX_Trigger(Module, AutoCSR):
+    def __init__(self):
+        self.trig_stb = Signal()
+        self.delay = Signal(upconn_dw) 
+        self.linktrig_mode = Signal(max=4)
+
+        # # #
+
+        self.submodules.code_src = code_src = Code_Source(upconn_layout, counts=3)
+        self.comb += [
+            code_src.stb.eq(self.trig_stb),
+            code_src.data.eq(self.delay),
+            code_src.k.eq(0)
+        ]
+
+        self.submodules.inserter_once = inserter_once = Code_Inserter(upconn_layout, counts=1)
+        self.submodules.inserter_twice = inserter_twice = Code_Inserter(upconn_layout, counts=2)
+        self.comb += [
+            inserter_once.k.eq(1),
+            inserter_twice.k.eq(1),
+            If((self.linktrig_mode == 0) | (self.linktrig_mode == 2),
+                inserter_once.data.eq(K(28, 2)),
+                inserter_twice.data.eq(K(28, 4)),
+            ).Else(
+                inserter_once.data.eq(K(28, 4)),
+                inserter_twice.data.eq(K(28, 2)),
+            )
+        ]
+        
+        tx_pipeline = [ code_src, inserter_twice, inserter_once]
+
+        for s, d in zip(tx_pipeline, tx_pipeline[1:]):
+            self.comb += s.source.connect(d.sink)
+
+        self.source = tx_pipeline[-1].source
+
+class Trigger_ACK(Module):
+    def __init__(self):
+        self.ack = Signal()
+
+        # # #
+
+        # Section 9.3.2 (CXP-001-2021)
+        # Send 4x K28.6 and 4x 0x01 as trigger packet ack
+        self.submodules.code_src = code_src = Code_Source(upconn_layout)
+        self.submodules.k_code_inserter = k_code_inserter = Code_Inserter(upconn_layout)
+        self.comb += [
+            code_src.stb.eq(self.ack),
+            code_src.data.eq(0x01),
+            code_src.k.eq(0),
+            k_code_inserter.data.eq(K(28, 6)),
+            k_code_inserter.k.eq(1),
+
+            code_src.source.connect(k_code_inserter.sink)
+        ]
+
+        self.source = k_code_inserter.source
+
+class TX_Command_Packet(Module, AutoCSR):
+    def __init__(self):
+        self.len = CSRStorage(6)
+        self.data = CSR(upconn_dw)
+        self.writeable = CSRStatus()
+
+        # # #
+
+        # Section 12.1.2 (CXP-001-2021)
+        # Max control packet size is 128 bytes
+        self.submodules.fifo = fifo = stream.SyncFIFO(upconn_layout, 128)
+        self.submodules.pak_wrp = pak_wrp = Packet_Wrapper(upconn_layout)
+        self.source = pak_wrp.source
+
+        self.comb += fifo.source.connect(pak_wrp.sink)
+
+        len = Signal(6, reset=1)
+        self.sync += [
+            self.writeable.status.eq(fifo.sink.ack),
+            If(fifo.sink.ack, fifo.sink.stb.eq(0)),
+            If(self.data.re,
+                fifo.sink.stb.eq(1),
+                fifo.sink.data.eq(self.data.r),
+
+                fifo.sink.k.eq(0),
+                If(len == self.len.storage,
+                    fifo.sink.eop.eq(1),
+                    len.eq(len.reset),
+                ).Else(
+                    fifo.sink.eop.eq(0),
+                    len.eq(len + 1),
+                ),
+            )
+        ]
+
+class TX_Test_Packet(Module, AutoCSR):
+    def __init__(self):
+
+        self.stb = CSR()
+        self.busy = CSRStatus()
+
+        # # #
+
+        testdata_src = stream.Endpoint(upconn_layout)
+
+        
+        # Section 9.9.2 (CXP-001-2021)
+        # 0x00, 0x01 ... 0xFF need to be send 16 times 
+        # cnt[8:12] is used to count up 16 times while cnt[:8] is the data 
+        cnt = Signal(max=0x1000)
+        clr_cnt = Signal()
+        inc_cnt = Signal()
+
+        self.sync += [
+            If(clr_cnt,
+                cnt.eq(cnt.reset),
+            ).Elif(inc_cnt,
+                cnt.eq(cnt + 1),
+            ),
+        ]
+
+        self.submodules.fsm = fsm = FSM(reset_state="IDLE")
+        
+        fsm.act("IDLE",
+            clr_cnt.eq(1),
+            If(self.stb.re,
+               NextState("WRITE")
+            )
+        )
+
+        fsm.act("WRITE",
+            testdata_src.stb.eq(1),
+            testdata_src.data.eq(cnt[:8]),
+            testdata_src.k.eq(0),
+            If(cnt == 0xFFF,
+                testdata_src.eop.eq(1),
+                If(testdata_src.ack, NextState("IDLE"))
+            ).Else(
+                inc_cnt.eq(testdata_src.ack)
+            )
+        )
+
+        self.submodules.pak_type_inserter = pak_type_inserter = Code_Inserter(upconn_layout)
+        self.submodules.pak_wrp = pak_wrp = Packet_Wrapper(upconn_layout)
+        self.comb += [
+            pak_type_inserter.data.eq(0x04),
+            pak_type_inserter.k.eq(0x04),
+
+            testdata_src.connect(pak_type_inserter.sink),
+            pak_type_inserter.source.connect(pak_wrp.sink),
+        ]
+
+        self.source = pak_wrp.source
+
+        self.sync += \
+            If(self.stb.re,
+                self.busy.status.eq(1),
+            ).Elif(self.source.eop & self.source.ack,
+                self.busy.status.eq(0)
+            )

src/gateware/cxp_upconn.py

@@ -0,0 +1,374 @@
+from math import ceil
+
+from migen import *
+from migen.genlib.coding import PriorityEncoder
+
+from misoc.cores.code_8b10b import SingleEncoder
+from misoc.interconnect import stream
+from misoc.interconnect.csr import *
+
+from cxp_pipeline import upconn_layout
+
+IDLE_CHARS = Array([
+    #[char, k]
+    [0xBC, 1], #K28.5
+    [0x3C, 1], #K28.1
+    [0x3C, 1], #K28.1
+    [0xB5, 0], #D21.5
+])
+
+@ResetInserter()
+class UpConn_ClockGen(Module):
+    def __init__(self, sys_clk_freq):
+        self.clk = Signal()
+        self.clk_10x = Signal() # 20.83MHz 48ns or 41.66MHz 24ns
+
+        self.freq2x_enable = Signal()
+        # # #
+
+        period = 1e9/sys_clk_freq
+        max_count = ceil(48/period)
+        counter = Signal(max=max_count, reset=max_count-1)
+
+        clk_div = Signal(max=10, reset=9)
+
+        self.sync += [
+            self.clk.eq(0),
+            self.clk_10x.eq(0),
+
+            If(counter == 0,
+                self.clk_10x.eq(1),
+                If(self.freq2x_enable,
+                    counter.eq(int(max_count/2)-1),
+                ).Else(
+                    counter.eq(counter.reset),
+                ),
+            ).Else(
+                counter.eq(counter-1),
+            ),
+
+            If(counter == 0,
+                If(clk_div == 0,
+                    self.clk.eq(1),
+                    clk_div.eq(clk_div.reset),
+                ).Else(
+                    clk_div.eq(clk_div-1),
+                )
+            )
+
+        ]
+
+@ResetInserter()
+@CEInserter()
+class SERDES_10bits(Module):
+    def __init__(self, pad):
+        self.oe = Signal()
+        self.d = Signal(10)
+
+        # # #
+
+        o = Signal()
+        tx_bitcount = Signal(max=10)
+        tx_reg = Signal(10)
+
+        # DEBUG:
+        self.o = Signal()
+        self.comb += self.o.eq(o)
+
+        self.specials += Instance("OBUF", i_I=o, o_O=pad),
+        
+        self.sync += [
+            If(self.oe,
+                # send LSB first
+                o.eq(tx_reg[0]),
+                tx_reg.eq(Cat(tx_reg[1:], 0)),
+                tx_bitcount.eq(tx_bitcount + 1),   
+
+                If(tx_bitcount == 9,
+                    tx_bitcount.eq(0),
+                    tx_reg.eq(self.d),
+                ),
+            ).Else(
+                o.eq(0),
+                tx_bitcount.eq(0),
+            )
+        ]
+
+@ResetInserter()
+class Transmit_Scheduler(Module):
+    def __init__(self, interface, debug_buf):
+        self.tx_enable = Signal()
+
+        self.oe = Signal()
+        self.ce = Signal()
+
+        # # #
+
+        self.submodules.startup_fsm = startup_fsm = CEInserter()(FSM(reset_state="WAIT_TX_ENABLE"))
+        self.submodules.encoder = encoder = CEInserter()(SingleEncoder(True))
+        self.comb += [
+            startup_fsm.ce.eq(self.ce),
+            encoder.ce.eq(self.ce),
+        ]
+
+        tx_charcount = Signal(max=4)
+        tx_wordcount = Signal(max=10000)
+
+        idling = Signal()
+        priorities = Signal.like(interface.pe.o)
+
+        # DEBUG:
+        self.idling = Signal()
+        self.tx_charcount = Signal(max=4)
+        self.comb += [
+            self.idling.eq(idling),
+            self.tx_charcount.eq(tx_charcount),
+        ]
+
+        startup_fsm.act("WAIT_TX_ENABLE",
+            If(self.tx_enable,
+                NextValue(idling, 1),
+                NextValue(tx_charcount, 0),
+                NextValue(encoder.d, IDLE_CHARS[0][0]),
+                NextValue(encoder.k, IDLE_CHARS[0][1]),
+                NextState("START_TX"),
+
+                # DEBUG:
+                If(debug_buf.sink_ack,
+                    NextValue(debug_buf.sink_stb, 1),
+                    NextValue(debug_buf.sink_data, IDLE_CHARS[0][0]),
+                    NextValue(debug_buf.sink_k, IDLE_CHARS[0][1]),
+                )
+            )
+        )
+
+        startup_fsm.act("START_TX",
+            self.oe.eq(1),
+            If((~self.tx_enable) & (tx_charcount == 3),
+                NextState("WAIT_TX_ENABLE")
+            )
+        )
+
+        # hold ack for only one sys clk cycle to prevent data loss
+        for ack in interface.sink_ack:
+            self.sync += ack.eq(0)
+
+        self.sync += [
+            debug_buf.sink_stb.eq(0),
+            If(self.oe & self.ce,
+                encoder.disp_in.eq(encoder.disp_out),
+                If((~interface.pe.n) & (interface.pe.o == 0),
+                    # trigger packets are inserted at char boundary and don't contribute to word count
+                    interface.sink_ack[0].eq(1),
+                    encoder.d.eq(interface.sink_data[0]),
+                    encoder.k.eq(interface.sink_k[0]),
+
+                    # DEBUG:
+                    If(debug_buf.sink_ack,
+                        debug_buf.sink_stb.eq(1),
+                        debug_buf.sink_data.eq(interface.sink_data[0]),
+                        debug_buf.sink_k.eq(interface.sink_k[0]),
+                    )
+                ).Else(
+                    If(tx_charcount == 3,
+                        tx_charcount.eq(0),
+
+                        # Section 9.2.4 (CXP-001-2021)
+                        # other priorities packets are inserted at word boundary
+                        If((~interface.pe.n) & (tx_wordcount != 9999),
+                            idling.eq(0),
+                            priorities.eq(interface.pe.o),
+                            tx_wordcount.eq(tx_wordcount + 1),
+
+                            interface.sink_ack[interface.pe.o].eq(1),
+                            encoder.d.eq(interface.sink_data[interface.pe.o]),
+                            encoder.k.eq(interface.sink_k[interface.pe.o]),
+
+                            # DEBUG:
+                            If(debug_buf.sink_ack,
+                                debug_buf.sink_stb.eq(1),
+                                debug_buf.sink_data.eq(interface.sink_data[interface.pe.o]),
+                                debug_buf.sink_k.eq(interface.sink_k[interface.pe.o]),
+                            )
+                        ).Else(
+                            # Section 9.2.5.1 (CXP-001-2021)
+                            # IDLE word shall be transmitted at least once every 10,000 words, but should not be inserted into trigger packet
+                            idling.eq(1),
+                            tx_wordcount.eq(0),
+
+                            encoder.d.eq(IDLE_CHARS[0][0]),
+                            encoder.k.eq(IDLE_CHARS[0][1]),
+
+                            # DEBUG:
+                            If(debug_buf.sink_ack,
+                                debug_buf.sink_stb.eq(1),
+                                debug_buf.sink_data.eq(IDLE_CHARS[0][0]),
+                                debug_buf.sink_k.eq(IDLE_CHARS[0][1]),
+                            )
+                        )
+                    ).Else(
+                        tx_charcount.eq(tx_charcount + 1),
+                        If(~idling,
+                            tx_wordcount.eq(tx_wordcount + 1),
+                            interface.sink_ack[priorities].eq(1),
+                            encoder.d.eq(interface.sink_data[priorities]),
+                            encoder.k.eq(interface.sink_k[priorities]),
+
+                            # DEBUG:
+                            If(debug_buf.sink_ack,
+                                debug_buf.sink_stb.eq(1),
+                                debug_buf.sink_data.eq(interface.sink_data[priorities]),
+                                debug_buf.sink_k.eq(interface.sink_k[priorities]),
+                            )
+                        ).Else(
+                            encoder.d.eq(IDLE_CHARS[tx_charcount + 1][0]),
+                            encoder.k.eq(IDLE_CHARS[tx_charcount + 1][1]),
+
+                            # DEBUG:
+                            If(debug_buf.sink_ack,
+                                debug_buf.sink_stb.eq(1),
+                                debug_buf.sink_data.eq(IDLE_CHARS[tx_charcount + 1][0]),
+                                debug_buf.sink_k.eq(IDLE_CHARS[tx_charcount + 1][1]),
+                            )
+                        )
+                    ),       
+                ),
+            )
+        ]
+
+class PHY_Interface(Module):
+    def __init__(self, layout, nsink):
+        sink_stb = Signal(nsink)
+        self.sink_ack = Array(Signal() for _ in range(nsink))
+        self.sink_data = Array(Signal(8) for _ in range(nsink))
+        self.sink_k = Array(Signal() for _ in range(nsink))
+
+        # # #
+
+        self.sinks = []
+        for i in range(nsink):
+            sink = stream.Endpoint(layout)
+            self.sinks += [sink]
+
+            self.comb += [
+                sink.ack.eq(self.sink_ack[i]),
+                sink_stb[i].eq(sink.stb),
+                self.sink_data[i].eq(sink.data),
+                self.sink_k[i].eq(sink.k),
+            ]
+
+        # FIFOs transmission priority
+        self.submodules.pe = PriorityEncoder(nsink)
+        self.comb += self.pe.i.eq(sink_stb)
+
+class Debug_buffer(Module,AutoCSR):
+    def __init__(self, layout):
+        self.sink_stb = Signal()
+        self.sink_ack = Signal()
+        self.sink_data = Signal(8)
+        self.sink_k = Signal()
+
+        # # #
+
+        self.submodules.buf_out = buf_out = stream.SyncFIFO(layout, 128)
+
+        self.sync += [
+            buf_out.sink.stb.eq(self.sink_stb),
+            self.sink_ack.eq(buf_out.sink.ack),
+            buf_out.sink.data.eq(self.sink_data),
+            buf_out.sink.k.eq(self.sink_k),
+        ]
+
+        self.inc = CSR()
+        self.dout_pak = CSRStatus(8)
+        self.kout_pak = CSRStatus()
+        self.dout_valid = CSRStatus()
+
+        self.sync += [
+            # output
+            buf_out.source.ack.eq(self.inc.re),
+            self.dout_pak.status.eq(buf_out.source.data),
+            self.kout_pak.status.eq(buf_out.source.k),
+            self.dout_valid.status.eq(buf_out.source.stb),
+        ]
+
+
+class CXP_UpConn_PHY(Module, AutoCSR):
+    def __init__(self, pad, sys_clk_freq, debug_sma, pmod_pads, nsink=3):
+        self.bitrate2x_enable = Signal()
+        self.clk_reset = Signal()
+
+        self.tx_enable = Signal()
+        self.tx_busy = Signal()
+
+        # # #
+
+        self.submodules.cg = cg = UpConn_ClockGen(sys_clk_freq)
+        self.submodules.interface = interface = PHY_Interface(upconn_layout, nsink)
+
+        self.sinks = interface.sinks
+
+        # DEBUG:
+        self.submodules.debug_buf = debug_buf = Debug_buffer(upconn_layout)
+
+        self.submodules.scheduler = scheduler = Transmit_Scheduler(interface, debug_buf)
+        self.submodules.serdes = serdes = SERDES_10bits(pad)
+
+        self.comb += [
+            self.tx_busy.eq(~interface.pe.n),
+
+            cg.reset.eq(self.clk_reset),
+            cg.freq2x_enable.eq(self.bitrate2x_enable),
+
+            scheduler.reset.eq(self.clk_reset),
+            scheduler.ce.eq(cg.clk),
+            scheduler.tx_enable.eq(self.tx_enable),
+
+            serdes.reset.eq(self.clk_reset),
+            serdes.ce.eq(cg.clk_10x),
+            serdes.d.eq(scheduler.encoder.output),
+            serdes.oe.eq(scheduler.oe),
+        ]
+
+        # DEBUG: remove pads
+       
+        prioity_0 = Signal()
+        word_bound = Signal()
+
+        p0 = Signal()
+        p3 = Signal()
+        self.comb += [
+           prioity_0.eq((~interface.pe.n) & (interface.pe.o == 0)),
+           word_bound.eq(scheduler.tx_charcount == 3),
+
+           # because of clk delay
+           p0.eq(scheduler.tx_charcount == 2),
+           p3.eq(scheduler.tx_charcount  == 1),
+
+        ] 
+        self.specials += [
+            # # debug sma
+            Instance("OBUF", i_I=serdes.o, o_O=debug_sma.p_tx),
+            Instance("OBUF", i_I=cg.clk_10x, o_O=debug_sma.n_rx),
+
+
+
+            # # pmod 0-7 pin
+            # Instance("OBUF", i_I=serdes.o, o_O=pmod_pads[0]),
+            # Instance("OBUF", i_I=cg.clk_10x, o_O=pmod_pads[1]),
+            # Instance("OBUF", i_I=~tx_fifos.pe.n, o_O=pmod_pads[2]),
+            # Instance("OBUF", i_I=prioity_0, o_O=pmod_pads[3]),
+            # Instance("OBUF", i_I=word_bound, o_O=pmod_pads[4]),
+            # Instance("OBUF", i_I=debug_buf.buf_out.sink.stb, o_O=pmod_pads[4]),
+            # Instance("OBUF", i_I=debug_buf.buf_out.sink.ack, o_O=pmod_pads[5]),
+            # Instance("OBUF", i_I=debug_buf.buf_out.source.stb, o_O=pmod_pads[6]),
+            # Instance("OBUF", i_I=debug_buf.buf_out.source.ack, o_O=pmod_pads[7]),
+
+            # Instance("OBUF", i_I=scheduler.idling, o_O=pmod_pads[5]),
+            # # Instance("OBUF", i_I=tx_fifos.source_ack[0], o_O=pmod[6]),
+            # # Instance("OBUF", i_I=tx_fifos.source_ack[2], o_O=pmod[6]),
+            # # Instance("OBUF", i_I=tx_fifos.source_ack[1], o_O=pmod[7]),
+            # Instance("OBUF", i_I=p0, o_O=pmod_pads[6]),
+            # Instance("OBUF", i_I=p3, o_O=pmod_pads[7]),
+        ]
+

src/gateware/zc706.py

@@ -25,6 +25,7 @@ import analyzer
 import acpki
 import drtio_aux_controller
 import zynq_clocking
+import cxp_4r_fmc, cxp
 from config import write_csr_file, write_mem_file, write_rustc_cfg_file
 
 class SMAClkinForward(Module):
@@ -138,7 +139,7 @@ class ZC706(SoCCore):
         platform.add_extension(si5324_fmc33)
         self.comb += platform.request("si5324_33").rst_n.eq(1)
 
-        cdr_clk = Signal()
+        self.cdr_clk = Signal()
         cdr_clk_buf = Signal()
         si5324_out = platform.request("si5324_clkout")
         platform.add_period_constraint(si5324_out.p, 8.0)
@@ -146,11 +147,11 @@ class ZC706(SoCCore):
             Instance("IBUFDS_GTE2",
                 i_CEB=0,
                 i_I=si5324_out.p, i_IB=si5324_out.n,
-                o_O=cdr_clk,
+                o_O=self.cdr_clk,
                 p_CLKCM_CFG="TRUE",
                 p_CLKRCV_TRST="TRUE",
                 p_CLKSWING_CFG=3),
-            Instance("BUFG", i_I=cdr_clk, o_O=cdr_clk_buf)
+            Instance("BUFG", i_I=self.cdr_clk, o_O=cdr_clk_buf)
         ]
         self.config["HAS_SI5324"] = None
         self.config["SI5324_AS_SYNTHESIZER"] = None
@@ -652,6 +653,74 @@ class _NIST_QC2_RTIO:
         self.add_rtio(rtio_channels)
 
 
+class CXP_FMC():
+    """
+    CoaXpress FMC with 4 CXP channel and 1 SMA trigger
+    """
+    def __init__(self):
+        platform = self.platform
+        platform.add_extension(cxp_4r_fmc.fmc_adapter_io)
+        platform.add_extension(leds_fmc33)
+
+        debug_sma = [
+            ("user_sma_clock_33", 0,
+                Subsignal("p_tx", Pins("AD18"), IOStandard("LVCMOS33")),
+                Subsignal("n_rx", Pins("AD19"), IOStandard("LVCMOS33")),
+            ),
+        ]
+
+        pmod1_33 = [
+            ("pmod1_33", 0, Pins("AJ21"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 1, Pins("AK21"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 2, Pins("AB21"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 3, Pins("AB16"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 4, Pins("Y20"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 5, Pins("AA20"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 6, Pins("AC18"), IOStandard("LVCMOS33")),
+            ("pmod1_33", 7, Pins("AC19"), IOStandard("LVCMOS33")),
+        ]
+
+        platform.add_extension(debug_sma)
+        platform.add_extension(pmod1_33)
+        pmod_pads = [platform.request("pmod1_33", i) for i in range(8)]
+
+        clk_freq = 125e6
+
+        gtx_pads = [platform.request("CXP_HS", i) for i in range(4)]
+
+        self.submodules.cxp = cxp.CXP(
+            refclk=self.cdr_clk,
+            downconn_pads=gtx_pads,
+            upconn_pads=platform.request("CXP_LS", 0),
+            sys_clk_freq=clk_freq,
+            debug_sma=platform.request("user_sma_clock_33"),
+            pmod_pads = pmod_pads
+        )
+        self.csr_devices.append("cxp")
+
+        # max freq of cxp_gtx_rx = linerate/internal_datawidth = 12.5Gbps/40 = 312.5MHz
+        # zc706 use speed grade 2 which only support up to 10.3125Gbps (4ns)
+        # pushing to 12.5Gbps (3.2ns) will result in Pulse width violation but setup/hold times are met
+        for gtx in self.cxp.downconn.gtxs:
+            platform.add_period_constraint(gtx.cd_cxp_gtx_tx.clk, 3.2)
+            platform.add_period_constraint(gtx.cd_cxp_gtx_rx.clk, 3.2)
+            # constraint the CLK path 
+            platform.add_false_path_constraints(self.sys_crg.cd_sys.clk, gtx.cd_cxp_gtx_tx.clk, gtx.cd_cxp_gtx_rx.clk)
+
+        rtio_channels = []
+        # FIXME remove this placeholder RTIO channel
+        # There are too few RTIO channels and cannot be compiled (adr width issue of the lane distributor)
+        # see https://github.com/m-labs/artiq/pull/2158 for similar issue
+        print("USER LED at RTIO channel 0x{:06x}".format(len(rtio_channels)))
+        phy = ttl_simple.Output(self.platform.request("user_led_33", 0))
+        self.submodules += phy
+        rtio_channels.append(rtio.Channel.from_phy(phy))
+        self.config["HAS_RTIO_LOG"] = None
+        rtio_channels.append(rtio.LogChannel())
+
+        self.config["RTIO_LOG_CHANNEL"] = len(rtio_channels)
+        self.add_rtio(rtio_channels)
+
 class NIST_CLOCK(ZC706, _NIST_CLOCK_RTIO):
     def __init__(self, acpki, drtio100mhz):
         ZC706.__init__(self, acpki)
@@ -684,8 +753,13 @@ class NIST_QC2_Satellite(_SatelliteBase, _NIST_QC2_RTIO):
         _SatelliteBase.__init__(self, acpki, drtio100mhz)
         _NIST_QC2_RTIO.__init__(self)
 
+class CXP_Demo(ZC706, CXP_FMC):
+    def __init__(self, acpki, drtio100mhz):
+        ZC706.__init__(self, acpki)
+        CXP_FMC.__init__(self)
+
 VARIANTS = {cls.__name__.lower(): cls for cls in [NIST_CLOCK, NIST_CLOCK_Master, NIST_CLOCK_Satellite,
-                                                  NIST_QC2, NIST_QC2_Master, NIST_QC2_Satellite]}
+                                                  NIST_QC2, NIST_QC2_Master, NIST_QC2_Satellite, CXP_Demo]}
 
 def main():
     parser = argparse.ArgumentParser(

src/libboard_artiq/src/cxp_downconn.rs

@@ -0,0 +1,544 @@
+use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
+use libboard_zynq::{println, timer::GlobalTimer};
+use log::info;
+
+// use log::info;
+use crate::pl::csr;
+
+#[derive(Clone, Copy, Debug)]
+#[allow(non_camel_case_types)]
+pub enum CXP_SPEED {
+    CXP_1,
+    CXP_2,
+    CXP_3,
+    CXP_5,
+    CXP_6,
+    CXP_10,
+    CXP_12,
+}
+
+pub fn loopback_testing(timer: &mut GlobalTimer, speed: CXP_SPEED) {
+    println!("==============================================================================");
+    cxp_gtx::change_linerate(timer, speed);
+
+    unsafe {
+        info!("waiting for tx&rx setup...");
+        timer.delay_us(50_000);
+        info!(
+            "tx_phaligndone = {} | rx_phaligndone = {}",
+            csr::cxp::downconn_phy_txinit_phaligndone_read(),
+            csr::cxp::downconn_phy_rxinit_phaligndone_read(),
+        );
+
+        // enable txdata tranmission thought MGTXTXP, required by PMA loopback
+        csr::cxp::downconn_phy_txenable_write(1);
+
+        info!("waiting for rx to align...");
+        while csr::cxp::downconn_phy_rx_ready_read() != 1 {}
+        info!("rx ready!");
+
+        loop {
+            // for _ in 0..20 {
+            // NOTE: raw bits
+            // let data0 = csr::cxp::downconn_phy_rxdata_0_read();
+            // let data1 = csr::cxp::downconn_phy_rxdata_1_read();
+            // let data2 = csr::cxp::downconn_phy_rxdata_2_read();
+            // let data3 = csr::cxp::downconn_phy_rxdata_3_read();
+            // let rxready = csr::cxp::downconn_phy_rx_ready_read();
+            // timer.delay_us(100);
+            // if data0 == 0b0101111100 || data0 == 0b1010000011 {
+            //     println!(
+            //         "data[0] = {:#012b} comma = {} | rx ready = {}",
+            //         data0,
+            //         data0 == 0b0101111100 || data0 == 0b1010000011,
+            //         rxready,
+            //     );
+            //     timer.delay_us(1_000_000);
+            // } else if data0 == 0b1001111100 || data0 == 0b0110000011 {
+            //     println!(
+            //         "data[0] = {:#012b} K28.1 | rx ready = {}",
+            //         data0,
+            //         rxready,
+            //     );
+            //     timer.delay_us(1_000_000);
+            // } else {
+            //     println!(
+            //         "data[0] = {:#012b} | rx ready = {}",
+            //         data0,
+            //         rxready,
+            //     );
+            //     timer.delay_us(1_000_000);
+            // }
+
+            timer.delay_us(1_000_000);
+            // NOTE: raw bits
+            // let data0 = csr::cxp::downconn_phy_rxdata_0_read();
+            // let data1 = csr::cxp::downconn_phy_rxdata_1_read();
+            // let data2 = csr::cxp::downconn_phy_rxdata_2_read();
+            // let data3 = csr::cxp::downconn_phy_rxdata_3_read();
+            // println!(
+            //     "0b{:010b} {:010b} {:010b} {:010b}",
+            //     data0, data1, data2, data3
+            // );
+
+            // NOTE:decode data
+            // let data0_k = csr::cxp::downconn_phy_decoded_k_0_read();
+            // let data1_k = csr::cxp::downconn_phy_decoded_k_1_read();
+            // let data2_k = csr::cxp::downconn_phy_decoded_k_2_read();
+            // let data3_k = csr::cxp::downconn_phy_decoded_k_3_read();
+            let data0_decoded = csr::cxp::downconn_phy_decoded_data_0_read();
+            let data1_decoded = csr::cxp::downconn_phy_decoded_data_1_read();
+            let data2_decoded = csr::cxp::downconn_phy_decoded_data_2_read();
+            let data3_decoded = csr::cxp::downconn_phy_decoded_data_3_read();
+            println!(
+                "{:#04x} {:#04x} {:#04x} {:#04x}",
+                data0_decoded, data1_decoded, data2_decoded, data3_decoded,
+            );
+            // println!(
+            //     "decoded_data[0] = {:#04x} decoded_k[0] = {:#b} decoded_data[1] = {:#04x} decoded_k[1] = {:#b}",
+            //     data0_decoded,
+            //     data0_k,
+            //     data1_decoded,
+            //     data1_k,
+            // );
+        }
+    }
+}
+
+pub fn setup(timer: &mut GlobalTimer) {
+    unsafe {
+        info!("turning on pmc loopback mode...");
+        csr::cxp::downconn_phy_loopback_mode_write(0b010); // Near-End PMA Loopback
+
+        // QPLL setup
+        csr::cxp::downconn_phy_qpll_reset_write(1);
+        info!("waiting for QPLL/CPLL to lock...");
+        while csr::cxp::downconn_phy_qpll_locked_read() != 1 {}
+        info!("QPLL locked");
+
+        // tx/rx setup
+        csr::cxp::downconn_phy_tx_start_init_write(1);
+        csr::cxp::downconn_phy_rx_start_init_write(1);
+
+        info!("waiting for tx & rx setup...");
+        timer.delay_us(50_000);
+        info!(
+            "tx_phaligndone = {} | rx_phaligndone = {}",
+            csr::cxp::downconn_phy_txinit_phaligndone_read(),
+            csr::cxp::downconn_phy_rxinit_phaligndone_read(),
+        );
+    }
+
+    cxp_gtx::change_linerate(timer, CXP_SPEED::CXP_1);
+}
+
+pub mod cxp_gtx {
+    use super::*;
+
+    struct CdrConfig {
+        pub cfg_reg0: u16, //0x0A8
+        pub cfg_reg1: u16, //0x0A9
+        pub cfg_reg2: u16, //0x0AA
+        pub cfg_reg3: u16, //0x0AB
+        pub cfg_reg4: u16, //0x0AC
+    }
+
+    pub fn change_linerate(timer: &mut GlobalTimer, speed: CXP_SPEED) {
+        info!("Changing datarate to {:?}", speed);
+        // DEBUG: DRP pll for TXUSRCLK = freq(linerate)/20
+        let settings = txusrclk::get_txusrclk_config(speed);
+        txusrclk::setup(timer, settings);
+
+        change_qpll_settings(speed);
+        change_cdr_cfg(speed);
+
+        unsafe {
+            csr::cxp::downconn_phy_qpll_reset_write(1);
+            info!("waiting for QPLL/CPLL to lock...");
+            while csr::cxp::downconn_phy_qpll_locked_read() != 1 {}
+            info!("QPLL locked");
+        }
+
+        unsafe {
+            csr::cxp::downconn_phy_tx_restart_write(1);
+            csr::cxp::downconn_phy_rx_restart_write(1);
+        }
+    }
+
+    fn change_qpll_settings(speed: CXP_SPEED) {
+        // Change QPLL_FBDIV
+        let qpll_div_reg = match speed {
+            CXP_SPEED::CXP_1 | CXP_SPEED::CXP_2 | CXP_SPEED::CXP_5 | CXP_SPEED::CXP_10 => 0x0120, // FB_Divider = 80
+            CXP_SPEED::CXP_3 | CXP_SPEED::CXP_6 | CXP_SPEED::CXP_12 => 0x0170,                    // FB_Divider = 100
+        };
+
+        println!("0x36 = {:#06x}", qpll_read(0x36));
+        qpll_write(0x36, qpll_div_reg);
+        println!("0x36 = {:#06x}", qpll_read(0x36));
+
+        // DEBUG: remove txoutdiv
+        let txrxout_div = match speed {
+            CXP_SPEED::CXP_1 => 0x33,                      // 8
+            CXP_SPEED::CXP_2 | CXP_SPEED::CXP_3 => 0x22,   // 4
+            CXP_SPEED::CXP_5 | CXP_SPEED::CXP_6 => 0x11,   // 2
+            CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => 0x00, // 1
+        };
+
+        // OUT_DIV
+        println!("0x88 = {:#06x}", gtx_read(0x88));
+        gtx_write(0x88, txrxout_div);
+        println!("0x88 = {:#06x}", gtx_read(0x88));
+    }
+
+    fn change_cdr_cfg(speed: CXP_SPEED) {
+        let cdr_cfg = match speed {
+            // rxout_div = 8
+            CXP_SPEED::CXP_1 => {
+                CdrConfig {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1008, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x0003, //0x0AC
+                }
+            }
+            // rxout_div = 4
+            CXP_SPEED::CXP_2 | CXP_SPEED::CXP_5 => {
+                CdrConfig {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1010, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x0003, //0x0AC
+                }
+            }
+            // rxout_div = 2
+            CXP_SPEED::CXP_3 | CXP_SPEED::CXP_6 => {
+                CdrConfig {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1020, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x0003, //0x0AC
+                }
+            }
+            // rxout_div = 1
+            CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => {
+                CdrConfig {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1040, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x000B, //0x0AC
+                }
+            }
+        };
+
+        gtx_write(0x0A8, cdr_cfg.cfg_reg0);
+        gtx_write(0x0A9, cdr_cfg.cfg_reg1);
+        gtx_write(0x0AA, cdr_cfg.cfg_reg2);
+        gtx_write(0x0AB, cdr_cfg.cfg_reg3);
+        gtx_write(0x0AC, cdr_cfg.cfg_reg4);
+    }
+
+    #[allow(dead_code)]
+    fn gtx_read(address: u16) -> u16 {
+        // DEBUG:
+        unsafe {
+            csr::cxp::downconn_phy_gtx_daddr_write(address);
+            csr::cxp::downconn_phy_gtx_dread_write(1);
+            while csr::cxp::downconn_phy_gtx_dready_read() != 1 {}
+            csr::cxp::downconn_phy_gtx_dout_read()
+        }
+    }
+
+    fn gtx_write(address: u16, value: u16) {
+        unsafe {
+            csr::cxp::downconn_phy_gtx_daddr_write(address);
+            csr::cxp::downconn_phy_gtx_din_write(value);
+            csr::cxp::downconn_phy_gtx_din_stb_write(1);
+            while csr::cxp::downconn_phy_gtx_dready_read() != 1 {}
+        }
+    }
+
+    #[allow(dead_code)]
+    fn qpll_read(address: u8) -> u16 {
+        // DEBUG:
+        unsafe {
+            csr::cxp::downconn_phy_qpll_daddr_write(address);
+            csr::cxp::downconn_phy_qpll_dread_write(1);
+            while csr::cxp::downconn_phy_qpll_dready_read() != 1 {}
+            csr::cxp::downconn_phy_qpll_dout_read()
+        }
+    }
+
+    fn qpll_write(address: u8, value: u16) {
+        unsafe {
+            csr::cxp::downconn_phy_qpll_daddr_write(address);
+            csr::cxp::downconn_phy_qpll_din_write(value);
+            csr::cxp::downconn_phy_qpll_din_stb_write(1);
+            while csr::cxp::downconn_phy_qpll_dready_read() != 1 {}
+        }
+    }
+}
+
+pub mod txusrclk {
+    use super::*;
+
+    pub struct PLLSetting {
+        pub clkout0_reg1: u16,  //0x08
+        pub clkout0_reg2: u16,  //0x09
+        pub clkfbout_reg1: u16, //0x14
+        pub clkfbout_reg2: u16, //0x15
+        pub div_reg: u16,       //0x16
+        pub lock_reg1: u16,     //0x18
+        pub lock_reg2: u16,     //0x19
+        pub lock_reg3: u16,     //0x1A
+        pub power_reg: u16,     //0x28
+        pub filt_reg1: u16,     //0x4E
+        pub filt_reg2: u16,     //0x4F
+    }
+
+    fn one_clock_cycle() {
+        unsafe {
+            csr::cxp::downconn_phy_pll_dclk_write(1);
+            csr::cxp::downconn_phy_pll_dclk_write(0);
+        }
+    }
+
+    fn set_addr(address: u8) {
+        unsafe {
+            csr::cxp::downconn_phy_pll_daddr_write(address);
+        }
+    }
+
+    fn set_data(value: u16) {
+        unsafe {
+            csr::cxp::downconn_phy_pll_din_write(value);
+        }
+    }
+
+    fn set_enable(en: bool) {
+        unsafe {
+            let val = if en { 1 } else { 0 };
+            csr::cxp::downconn_phy_pll_den_write(val);
+        }
+    }
+
+    fn set_write_enable(en: bool) {
+        unsafe {
+            let val = if en { 1 } else { 0 };
+            csr::cxp::downconn_phy_pll_dwen_write(val);
+        }
+    }
+
+    fn get_data() -> u16 {
+        unsafe { csr::cxp::downconn_phy_pll_dout_read() }
+    }
+
+    fn drp_ready() -> bool {
+        unsafe { csr::cxp::downconn_phy_pll_dready_read() == 1 }
+    }
+
+    #[allow(dead_code)]
+    fn read(address: u8) -> u16 {
+        set_addr(address);
+        set_enable(true);
+        // Set DADDR on the mmcm and assert DEN for one clock cycle
+        one_clock_cycle();
+
+        set_enable(false);
+        while !drp_ready() {
+            // keep the clock signal until data is ready
+            one_clock_cycle();
+        }
+        get_data()
+    }
+
+    fn write(address: u8, value: u16) {
+        set_addr(address);
+        set_data(value);
+        set_write_enable(true);
+        set_enable(true);
+        // Set DADDR, DI on the mmcm and assert DWE, DEN for one clock cycle
+        one_clock_cycle();
+
+        set_write_enable(false);
+        set_enable(false);
+        while !drp_ready() {
+            // keep the clock signal until write is finished
+            one_clock_cycle();
+        }
+    }
+
+    fn reset(rst: bool) {
+        unsafe {
+            let val = if rst { 1 } else { 0 };
+            csr::cxp::downconn_phy_txpll_reset_write(val)
+        }
+    }
+
+    pub fn setup(timer: &mut GlobalTimer, settings: PLLSetting) {
+        if false {
+            info!("0x08 = {:#06x}", read(0x08));
+            info!("0x09 = {:#06x}", read(0x09));
+            info!("0x14 = {:#06x}", read(0x14));
+            info!("0x15 = {:#06x}", read(0x15));
+            info!("0x16 = {:#06x}", read(0x16));
+            info!("0x18 = {:#06x}", read(0x18));
+            info!("0x19 = {:#06x}", read(0x19));
+            info!("0x1A = {:#06x}", read(0x1A));
+            info!("0x28 = {:#06x}", read(0x28));
+            info!("0x4E = {:#06x}", read(0x4E));
+            info!("0x4F = {:#06x}", read(0x4F));
+        } else {
+            // Based on "DRP State Machine" from XAPP888
+            // hold reset HIGH during pll config
+            reset(true);
+            write(0x08, settings.clkout0_reg1);
+            write(0x09, settings.clkout0_reg2);
+            write(0x14, settings.clkfbout_reg1);
+            write(0x15, settings.clkfbout_reg2);
+            write(0x16, settings.div_reg);
+            write(0x18, settings.lock_reg1);
+            write(0x19, settings.lock_reg2);
+            write(0x1A, settings.lock_reg3);
+            write(0x28, settings.power_reg);
+            write(0x4E, settings.filt_reg1);
+            write(0x4F, settings.filt_reg2);
+            reset(false);
+
+            // wait for the pll to lock
+            timer.delay_us(100);
+
+            let locked = unsafe { csr::cxp::downconn_phy_txpll_locked_read() == 1 };
+            info!("txusrclk locked = {}", locked);
+        }
+    }
+
+    pub fn get_txusrclk_config(speed: CXP_SPEED) -> PLLSetting {
+        match speed {
+            CXP_SPEED::CXP_1 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 32
+                // TXUSRCLK=62.5MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1410,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_2 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 16
+                // TXUSRCLK=62.5MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1208,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_3 => {
+                // CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 16
+                // TXUSRCLK=78.125MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1208,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1145, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x7001,     //0x19
+                    lock_reg3: 0xf3e9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9908,     //0x4E
+                    filt_reg2: 0x1900,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_5 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 8
+                // TXUSRCLK=125MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1104,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_6 => {
+                // CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 8
+                // TXUSRCLK=156.25MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1104,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1145, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x7001,     //0x19
+                    lock_reg3: 0xf3e9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9908,     //0x4E
+                    filt_reg2: 0x1900,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_10 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 4
+                // TXUSRCLK=250MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1082,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_12 => {
+                // CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 4
+                // TXUSRCLK=312.5MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1082,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1145, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x7001,     //0x19
+                    lock_reg3: 0xf3e9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9908,     //0x4E
+                    filt_reg2: 0x1900,     //0x4F
+                }
+            }
+        }
+    }
+}
+
+// TODO: add recv like in drtioaux

src/libboard_artiq/src/cxp_proto.rs

@@ -0,0 +1,193 @@
+use core_io::{Error as IoError, Write};
+use crc::crc32;
+use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
+use io::Cursor;
+use libboard_zynq::{println, timer::GlobalTimer};
+
+use crate::pl::csr;
+
+const MAX_PACKET: usize = 128;
+const DATA_MAXSIZE: usize = /*max size*/MAX_PACKET - /*Tag*/4 - /*Op code & length*/4 - /*addr*/4 - /*CRC*/4 ;
+
+#[derive(Debug)]
+pub enum Error {
+    BufferError,
+    LinkDown,
+}
+
+impl From<IoError> for Error {
+    fn from(_: IoError) -> Error {
+        Error::BufferError
+    }
+}
+
+pub enum Packet {
+    CtrlRead {
+        addr: u32,
+        length: u8,
+    },
+    CtrlWrite {
+        addr: u32,
+        length: u8,
+        data: [u8; DATA_MAXSIZE],
+    }, // max register size is 8 bytes
+    CtrlReadWithTag {
+        tag: u8,
+        addr: u32,
+        length: u8,
+    },
+    CtrlWriteWithTag {
+        tag: u8,
+        addr: u32,
+        length: u8,
+        data: [u8; DATA_MAXSIZE],
+    }, // max register size is 8 bytes
+    EventAck {
+        packet_tag: u8,
+    },
+    TestPacket,
+}
+
+impl Packet {
+    pub fn write_to(&self, writer: &mut Cursor<&mut [u8]>) -> Result<(), Error> {
+        // CoaXpress use big endian
+        match *self {
+            Packet::CtrlRead { addr, length } => {
+                writer.write(&[0x02; 4])?;
+                writer.write(&[0x00, 0x00, 0x00, length])?;
+                writer.write(&addr.to_be_bytes())?;
+            }
+            Packet::CtrlWrite { addr, length, data } => {
+                writer.write(&[0x02; 4])?;
+                writer.write(&[0x01, 0x00, 0x00, length])?;
+                writer.write(&addr.to_be_bytes())?;
+                writer.write(&data[0..length as usize])?;
+            }
+            Packet::CtrlReadWithTag { tag, addr, length } => {
+                writer.write(&[0x05; 4])?;
+                writer.write(&[tag; 4])?;
+                writer.write(&[0x00, 0x00, 0x00, length])?;
+                writer.write(&addr.to_be_bytes())?;
+            }
+            Packet::CtrlWriteWithTag {
+                tag,
+                addr,
+                length,
+                data,
+            } => {
+                writer.write(&[0x05; 4])?;
+                writer.write(&[tag; 4])?;
+                writer.write(&[0x01, 0x00, 0x00, length])?;
+                writer.write(&addr.to_be_bytes())?;
+                writer.write(&data[0..length as usize])?;
+            }
+            Packet::EventAck { packet_tag } => {
+                writer.write(&[0x08; 4])?;
+                writer.write(&[packet_tag; 4])?;
+            }
+            _ => {}
+        }
+        // Section 9.2.2.2 (CXP-001-2021)
+        // Only Control packet need CRC32 appended in the end of the packet
+        // CoaXpress use the polynomial of IEEE-802.3 (Ethernet) CRC but the checksum calculation is different
+        // Also, the calculation does not include the first 4 bytes of packet_type
+        match *self {
+            Packet::CtrlRead { .. }
+            | Packet::CtrlWrite { .. }
+            | Packet::CtrlReadWithTag { .. }
+            | Packet::CtrlWriteWithTag { .. } => {
+                let checksum = crc32::checksum_ieee(&writer.get_ref()[4..writer.position()]);
+                writer.write(&(!checksum).to_le_bytes())?;
+            }
+            _ => {}
+        }
+        Ok(())
+    }
+}
+
+pub fn send(packet: &Packet) -> Result<(), Error> {
+    if unsafe { csr::cxp::upconn_tx_enable_read() } == 0 {
+        Err(Error::LinkDown)?
+    }
+
+    match *packet {
+        Packet::TestPacket => send_test_packet(),
+        _ => send_data_packet(packet),
+    }
+}
+
+fn send_data_packet(packet: &Packet) -> Result<(), Error> {
+    let mut buffer: [u8; MAX_PACKET] = [0; MAX_PACKET];
+    let mut writer = Cursor::new(&mut buffer[..]);
+
+    packet.write_to(&mut writer)?;
+
+    unsafe {
+        let len = writer.position();
+        csr::cxp::upconn_command_len_write(len as u8);
+        for data in writer.get_ref()[..len].iter() {
+            while csr::cxp::upconn_command_writeable_read() == 0 {}
+            csr::cxp::upconn_command_data_write(*data);
+        }
+    }
+    Ok(())
+}
+
+fn send_test_packet() -> Result<(), Error> {
+    unsafe {
+        while csr::cxp::upconn_tx_busy_read() == 1 {}
+        csr::cxp::upconn_tx_testmode_en_write(1);
+        // timer.delay_us(2);
+        csr::cxp::upconn_testseq_stb_write(1);
+        while csr::cxp::upconn_testseq_busy_read() == 1 {}
+        csr::cxp::upconn_tx_testmode_en_write(0);
+    }
+    Ok(())
+}
+
+pub fn write_u32(addr: u32, data: u32) -> Result<(), Error> {
+    let mut data_slice: [u8; DATA_MAXSIZE] = [0; DATA_MAXSIZE];
+    data_slice[..4].clone_from_slice(&data.to_be_bytes());
+    send(&Packet::CtrlWrite {
+        addr,
+        length: 4,
+        data: data_slice,
+    })?;
+
+    Ok(())
+}
+
+pub fn read_u32(addr: u32) -> Result<(), Error> {
+    send(&Packet::CtrlRead { addr, length: 4 })?;
+
+    Ok(())
+}
+
+pub fn write_u64(addr: u32, data: u64) -> Result<(), Error> {
+    let mut data_slice: [u8; DATA_MAXSIZE] = [0; DATA_MAXSIZE];
+    data_slice[..8].clone_from_slice(&data.to_be_bytes());
+    send(&Packet::CtrlWrite {
+        addr,
+        length: 8,
+        data: data_slice,
+    })?;
+
+    Ok(())
+}
+
+// DEBUG: use only
+pub fn print_packet(pak: &[u8]) {
+    println!("pak = [");
+    for i in 0..(pak.len() / 4) {
+        println!(
+            "{:#03}     {:#04X} {:#04X} {:#04X} {:#04X},",
+            i + 1,
+            pak[i * 4],
+            pak[i * 4 + 1],
+            pak[i * 4 + 2],
+            pak[i * 4 + 3]
+        )
+    }
+    println!("]");
+    println!("============================================");
+}

src/libboard_artiq/src/cxp_upconn.rs

@@ -0,0 +1,51 @@
+use core_io::{Error as IoError, Write};
+use crc::crc32;
+use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
+use io::Cursor;
+use libboard_zynq::{println, timer::GlobalTimer};
+
+pub use crate::cxp_proto;
+use crate::pl::csr;
+
+pub fn tx_test(timer: &mut GlobalTimer) {
+    const LEN: usize = 4 * 50;
+    let mut pak_arr: [u8; LEN] = [0; LEN];
+
+    unsafe {
+        csr::cxp::upconn_clk_reset_write(1);
+        // csr::cxp::upconn_bitrate2x_enable_write(1);
+        csr::cxp::upconn_clk_reset_write(0);
+
+        // read_u32(0x00).expect("Cannot Write CoaXpress Register");
+        csr::cxp::upconn_tx_enable_write(1);
+        timer.delay_us(2); // send one word
+        cxp_proto::send(&cxp_proto::Packet::EventAck { packet_tag: 0x04 }).expect("Cannot send CoaXpress packet");
+        // cxp_proto::send(&cxp_proto::Packet::TestPacket).expect("Cannot send CoaXpress packet");
+
+        // timer.delay_us(2);
+        // DEBUG: Trigger packet
+        // let linktrig_mode: u8 = 0x01;
+        // csr::cxp::upconn_trig_delay_write(0x05);
+        // csr::cxp::upconn_linktrigger_write(linktrig_mode);
+        // csr::cxp::upconn_trig_stb_write(1); // send trig
+
+        // DEBUG: Trigger ACK packet
+        // csr::cxp::upconn_ack_write(1);
+        timer.delay_us(20);
+        csr::cxp::upconn_tx_enable_write(0);
+
+        // Collect data
+        let mut i: usize = 0;
+        while csr::cxp::upconn_phy_debug_buf_dout_valid_read() == 1 {
+            pak_arr[i] = csr::cxp::upconn_phy_debug_buf_dout_pak_read();
+            // println!("received {:#04X}", pak_arr[i]);
+            csr::cxp::upconn_phy_debug_buf_inc_write(1);
+            i += 1;
+            if i == LEN {
+                break;
+            }
+        }
+
+        cxp_proto::print_packet(&pak_arr);
+    }
+}

src/libboard_artiq/src/lib.rs

@@ -42,6 +42,13 @@ pub mod si5324;
 pub mod si549;
 use core::{cmp, str};
 
+#[cfg(has_cxp)]
+pub mod cxp_downconn;
+#[cfg(has_cxp)]
+pub mod cxp_upconn;
+
+pub mod cxp_proto;
+
 pub fn identifier_read(buf: &mut [u8]) -> &str {
     unsafe {
         pl::csr::identifier::address_write(0);

src/runtime/src/main.rs

@@ -150,5 +150,16 @@ pub fn main_core0() {
 
     task::spawn(ksupport::report_async_rtio_errors());
 
+    use libboard_artiq::{cxp_downconn, cxp_upconn};
+    cxp_downconn::setup(&mut timer);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_1);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_2);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_3);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_5);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_6);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_10);
+    // cxp_downconn::loopback_testing(&mut timer, cxp_downconn::CXP_SPEED::CXP_12);
+    cxp_upconn::tx_test(&mut timer);
+
     comms::main(timer, cfg);
 }