1ba8c8dfee
runtime: remove irq again
2021-09-10 13:25:12 +08:00
3d629006df
makefiles: revert byte-swaps
2021-09-10 13:25:12 +08:00
7542105f0f
board_misoc: remove pcr
...
VexRiscv seems to not support additional hardware performance counter, at least I have not seen any documentation on how to use it.
2021-09-10 13:25:12 +08:00
01ca114c66
runtime: remove irq dependency
2021-09-10 13:25:12 +08:00
36171f2c61
runtime: remove inaccurate sp on panic
2021-09-10 13:25:12 +08:00
01e357e5d3
ksupport.ld: reduce load section alignment
2021-09-10 13:25:12 +08:00
1293e0750e
ld, makefiles: use ld.lld
2021-09-10 13:25:12 +08:00
5656e52581
remove profiler
2021-09-10 13:25:12 +08:00
1b8b4baf6a
ksupport: fix panic, libc, unwind
2021-09-10 13:25:12 +08:00
905330b0f1
ksupport: handle riscv exceptions
2021-09-10 13:25:12 +08:00
50a62b3d42
liballoc: change align to 16 bytes
2021-09-10 13:25:12 +08:00
7f0bc9f7f0
runtime/makefile: specify emulation, flip endianness
2021-09-10 13:25:12 +08:00
c42adfe6fd
runtime.ld: merge .sbss & .bss
2021-09-10 13:25:12 +08:00
f56152e72f
rust: fix dependencies
2021-09-10 13:25:12 +08:00
c800b6c8d3
runtime: update rust alloc, managed
2021-09-10 13:25:09 +08:00
e99061b013
runtime: add riscv
2021-09-10 13:23:22 +08:00
ecedec577c
runtime: impl riscv exception handling
2021-09-10 13:23:15 +08:00
252594a606
runtime: impl riscv panic handler
2021-09-10 13:20:31 +08:00
31bf17563c
personality: update from rust/panic_unwind
2021-09-10 13:20:31 +08:00
bfddd8a30f
libdyld: add riscv support
2021-09-10 13:20:31 +08:00
ad3037d0f6
libc: add minimal C types
2021-09-10 13:20:31 +08:00
daaf6c3401
libunwind: add rust interface
2021-09-10 13:20:31 +08:00
6d9cebfd42
satman: handle .sbss generation
2021-09-10 13:20:31 +08:00
96438c9da7
satman: make fbi big-endian
2021-09-10 13:20:31 +08:00
6535b2f089
satman: fix feature
2021-09-10 13:20:31 +08:00
45adaa1d98
satman: add riscv exception handling
2021-09-10 13:20:31 +08:00
869a282410
satman: use riscv
2021-09-10 13:20:31 +08:00
ebb9f298b5
proto_artiq: update alloc type path
2021-09-10 13:20:31 +08:00
97a0132f15
libio: update alloc type path
2021-09-10 13:20:31 +08:00
37ea863004
libio: pin failure version
2021-09-10 13:20:31 +08:00
3ff74e0693
bootloader: handle .sbss generation in .ld
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
448fe0e8cf
bootloader: fix panic
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
8294d7fea5
bootloader: swap endianness
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
13032272fd
bootloader: add rv32 exception handler
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
46102ee737
board_misoc: build vectors.S with rv64 target in misoc
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
b87ea79d51
rv32: rm irq & vexriscv-rust
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
9aee42f0f2
rv32/boot: remove hotswap
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
82b4052cd6
libboard_misoc: vexriscv integration
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
420891ba54
syntax
2021-08-12 13:01:35 +08:00
9f94bc61ae
missing part of 477b1516d
2021-08-12 12:55:37 +08:00
477b1516d3
remove profiler
2021-08-12 12:51:55 +08:00
5111132ef0
ICAP: prevent sayma from using it ( #1740 )
2021-08-06 15:08:30 +08:00
6b88ea563d
talk to ICAP primitive to restart gateware ( #1733 )
2021-08-05 17:00:31 +08:00
ea0c7b6173
Merge remote-tracking branch 'harrydrtio/k7-drtio'
2021-06-15 10:04:45 +08:00
92fd705990
increase memory allocated to comms CPU
...
See discussion in #1612 .
2021-02-21 19:06:12 +08:00
14d464b4cf
update copyright year
2021-02-17 15:52:08 +08:00
8148fdb8a7
use device endian for core device protocols ( #1591 )
2021-01-22 16:33:21 +08:00
3832b261b1
firmware: optimize integer array/list rpc
2021-01-21 09:05:17 +01:00
f6d39fd6ba
kc705: revive DRTIO master with updated syntax
...
* KC705 master variant now uses Si5324 as synthesiser.
* Multi-channel has not been implemented yet.
2021-01-20 15:05:31 +08:00
43be383c86
kasli v2.0: drive TX_DISABLE low on all SFPs ( fixes #1570 )
...
This was the same problem as #1508 but on SFP1..3
2020-12-23 00:10:12 +08:00
73271600a1
jdcg: STPL tests now perform after DAC initialization
2020-12-14 18:03:31 +08:00
David Nadlinger
d95e619567
compiler: Implement binary NumPy math functions (arctan2, …)
...
The bulk of the diff is just factoring out the implementation
for binary arithmetic implementations, to be reused for binary
function calls.
2020-11-11 01:35:28 +01:00
David Nadlinger
bc6fbecbda
compiler, firmware: Do not expose abort() to kernels
...
This was only exposed for the assert implementation, and
does not exist on Zynq.
2020-11-10 20:40:18 +01:00
ea95d91428
wrpll: separate collector reset
2020-11-09 17:57:13 +08:00
90017da484
firmware: remove obsolete watchdog code ( #1458 )
2020-10-15 18:38:00 +08:00
57ee57e7ea
runtime: fix metlino si5324 init (2)
2020-10-14 18:41:56 +08:00
ac35548d0f
runtime: fix metlino si5324 init
2020-10-14 12:57:25 +08:00
35c61ce24d
si5324: unify N31 settings when used as synthesizer
...
Closes #1528
2020-10-12 14:45:52 +08:00
hartytp
e6ff2ddc32
wrpll: add more diagnostics in firmware and adapt to recent gateware changes
2020-10-08 15:32:27 +08:00
9214e0f3e2
firmware: fix Si5324 CKIN selection on Kasli 2.0
...
https://github.com/sinara-hw/Kasli/issues/82#issuecomment-702129805
2020-10-02 20:35:32 +08:00
aac2194759
Ported rpc changes to or1k
2020-08-26 14:17:06 +08:00
Paweł Kulik
eb350c3459
Drive SFP0 TX_DISABLE low during startup (as was in Kasli v1.1). Fixes Ethernet on SFP modules with pullup on this line.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2020-08-24 21:39:53 +08:00
d8cd5023f6
runtime: expose more libm functions
2020-08-12 13:36:06 +08:00
David Nadlinger
8783ba2072
compiler/firmware: RPCs for ndarrays
2020-08-09 17:08:43 +01:00
504f72a02c
rtio: remove legacy i_overflow_reset CSR
2020-08-06 17:52:32 +08:00
eb28d7be3a
firmware/rpc: fixed typo
2020-07-16 15:15:47 +08:00
f78d673079
firmware/rpc: added #[repr(C)] for structs.
...
Previously the structs are in repr(Rust) which has no layout guarantee.
2020-07-16 15:11:17 +08:00
e31ee1f0b3
firmware/i2c: rewrite I2C implementation
...
* Never drive SDL or SDA high. They are specified to be open
collector/drain and pulled up by resistive pullups. Driving
high fails miserably in a multi-master topology (e.g. with
a USB I2C interface). It would only ever be implemented to
speed up the bus actively but that's tricky and completely
unnecessary here.
* Make the handover states between the I2C protocol phases (start, stop,
restart, write, read) well defined. Add comments stressing those
pre/postconditions.
* Add checks for SDA arbitration failures and stuck SCL.
* Remove wrong, misleading or redundant comments.
2020-07-15 16:43:07 +08:00
8719bab726
Revert "i2c: duplicate TCA9548 control byte"
...
This reverts commit f265976df6
2020-07-08 19:02:02 +08:00
f265976df6
i2c: duplicate TCA9548 control byte
2020-07-03 16:45:05 +08:00
David Nadlinger
3f0cf6e683
runtime: Stop kernel CPU before restarting comms CPU on panic
...
Before, the system would enter a boot loop when a panic occurred
while the kernel CPU was active (and panic_reset == 1), as
kernel::start() for the startup kernel would panic.
2020-07-01 17:29:05 +08:00
d5c1eaa16e
runtime: remove stack alignment requirement
...
I suppose this was for TMPU, but was never finished.
2020-05-29 15:37:23 +08:00
02900d79d0
firmware: fix typos
2020-05-29 15:21:07 +08:00
4e9a529e5a
kasli: integrate WRPLL
2020-05-07 21:34:02 +08:00
35f1814235
kasli: implement virtual LEDs
2020-05-07 19:07:43 +08:00
b83afedf43
kasli: light up ERROR LED on panic
2020-05-07 19:06:10 +08:00
4982fde898
firmware: I2C I/O expander support
2020-05-05 21:38:17 +08:00
ef4e5bc69b
firmware: Kasli I2C EEPROM cleanup
2020-05-05 21:29:29 +08:00
9bc43b2dbf
kasli: support EEPROM on v2
2020-04-23 23:00:36 +08:00
fb0ade77a9
firmware: fix non-DRTIO build
2020-04-10 17:23:17 +08:00
3c823a483a
sayma: improve DAC sync messaging (again)
2020-04-06 22:36:43 +08:00
4d601c2102
sayma: improve DAC sync messaging
2020-04-06 22:36:03 +08:00
61d4614b61
sayma: fix/cleanup DRTIO-DAC sync interaction
2020-04-06 22:34:05 +08:00
facc0357d8
drtio: make sure receive buffer is drained after ping reply
2020-04-06 22:33:15 +08:00
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
380de177e7
rtio: fix wide output after RTIO refactoring
...
fixes 3d0c3cc1cf
2020-03-05 17:55:27 +00:00
52ec849008
sayma: fix sysref_delay_dac
2020-02-05 19:04:01 +08:00
bf9f4e380a
si5324: program I2C mux on Metlino
2020-02-03 18:07:59 +08:00
bfcbffcd8d
update smoltcp
...
This disables the 'log' features which does not compile, and may break net_trace. To be investigated later.
2020-01-21 13:58:23 +08:00
62a52cb086
sayma: do not pollute the log with DAC status on success
2020-01-20 20:14:24 +08:00
6b428ef3be
sayma: initialize DAC before testing jesd::ready
2020-01-20 20:14:24 +08:00
ec03767dcf
sayma: improve DAC status report
2020-01-20 18:22:06 +08:00
5c299de3b4
sayma: print DAC status on JESD not ready error
2020-01-20 18:21:29 +08:00
45efee724e
sayma: add JESD204 PHY done diagnostics
2020-01-20 12:47:31 +08:00
3242e9ec6c
wrpll: loop test
2020-01-13 22:31:57 +08:00
d5895b8999
wrpll: adpll -> set_adpll
2020-01-13 20:46:36 +08:00
e7ef23d30c
wrpll: use CONFIG_CLOCK_FREQUENCY and rtio_frequency in trim_dcxos
2020-01-13 20:44:15 +08:00
ea3bce6fe3
wrpll: wait for settling time after setting ADPLL
2020-01-13 20:43:34 +08:00
9d7196bdb7
update copyright year
2020-01-13 19:33:44 +08:00
e87d864063
wrpll: print ADPLL offsets
2020-01-13 19:32:30 +08:00
8edbc33d0e
wrpll: calculate initial ADPLL offsets
2020-01-13 19:29:10 +08:00
9dd011f4ad
firmware: remove bitrotten Sayma code
2020-01-13 18:47:54 +08:00
583a18dd5f
firmware: expose fmod to kernels. Closes #1417
2020-01-10 14:33:02 +08:00
3f32d78c0e
wrpll: simple ADPLL test
2019-12-31 12:12:29 +08:00
bb04b082a7
wrpll: clarify comment
2019-12-31 12:12:29 +08:00
642a305c6a
wrpll: remove unnecessary delay
...
Counting now happens in the sys domain with no CDC between counter and CPU.
2019-12-30 20:01:06 +08:00
f57f235dca
wrpll: new frequency meter
...
As per Mattermost discussion with Tom.
2019-12-30 19:47:57 +08:00
dfad27125e
runtime: relax/fix TCP keepalive settings ( #1125 )
2019-12-23 19:58:10 +08:00
c5137eeb62
firmware: remove legacy hmc542 code
2019-12-20 15:25:55 +08:00
David Nadlinger
d3508b014f
firmware: Add whitespace between panic handler location and message
2019-12-17 19:59:59 +00:00
6f52540569
wrpll: fix previous commit
2019-12-09 20:13:55 +08:00
13486f3acf
wrpll: swap helper/main si549 frequencies
2019-12-09 19:49:34 +08:00
4919fb8765
wrpll: print DDMTD helper tags
2019-12-09 17:39:22 +08:00
0d4eccc1a5
wrpll: improve debug output
2019-12-09 17:23:09 +08:00
f633c62e8d
wrpll: speed up si549 i2c access
2019-12-09 17:22:58 +08:00
14e09582b6
wrpll: work around si549 not working when lsdiv=2
2019-12-09 16:20:08 +08:00
439576f59d
wrpll: fix Si549 initialization delays
2019-12-09 16:13:57 +08:00
0499f83580
wrpll: helper clock sanity check
2019-12-08 23:46:33 +08:00
Paweł Kulik
14e250c78f
Enabled internal pullup for CML SYSREF outputs, otherwise there is no signal on them.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2019-12-07 09:30:24 +08:00
eb271f383b
wrpll: add DDMTD cores
2019-11-28 22:03:50 +08:00
39d5ca11f4
si549: increase I2C frequency
2019-11-28 22:03:26 +08:00
87894102e5
si549: use recommended i2c read sequence
2019-11-28 17:49:02 +08:00
354d82cfe3
wrpll: drive helper clock domain
2019-11-28 17:40:00 +08:00
68cab5be8c
si549: cleanups
2019-11-28 16:36:59 +08:00
bcd2383c9d
wrpll: si549 initialization
2019-11-27 22:58:08 +08:00
4832bfb08c
wrpll: i2c functions, select_recovered_clock placeholder
2019-11-27 21:21:00 +08:00
449d2c4f08
libboard_misoc: fix !has_i2c
2019-11-27 21:04:28 +08:00
e0687b77f5
si5324: 10 MHz ext_ref_frequency
...
* close #1254
* tested on innsbruck2 kasli variant
* sponsored by Uni Innsbruck/AQT
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-11-22 18:29:12 +01:00
6644903843
bootloader: fix imports
2019-11-06 14:45:55 +08:00
b25a17fa37
netboot: support slave FPGA loading
2019-11-05 16:28:49 +08:00
9dc82bd766
bootloader: add no_flash_boot config option to force network boot
2019-11-05 15:31:08 +08:00
29b4d87943
firmware: add cargosha256.nix
2019-11-01 10:28:41 +08:00
5362f92b39
bootloader: disable minimum stack space check in linker script
...
* The value varies greatly whether netboot is enabled or not.
* There is no simple solution to detect has_ethmac in the linker script and set the value accordingly.
* The space check is an imperfect solution that will be superseded by stack pointer limits.
* Left commented out so we can re-enable it manually during development if stack corruption is suspected.
2019-11-01 10:25:14 +08:00
deadfead2a
bootloader: fix !has_ethmac
2019-11-01 10:19:08 +08:00
a78e493b72
firmware: load slave FPGA in bootloader
2019-10-31 12:42:40 +08:00
389a8f587a
slave_fpga: modularize
2019-10-31 11:50:53 +08:00
bc050fdeec
bootloader: treat zero-length firmware in flash as no firmware
2019-10-30 21:46:06 +08:00
462cf5967e
bootloader: add netboot support
2019-10-30 21:23:42 +08:00
f2f7170d20
hmc7043: use recommend I/O standards
...
https://github.com/sinara-hw/Sayma_RTM/issues/116#issuecomment-544187952
2019-10-21 22:56:10 +08:00
47a83c71f1
firmware: more readable network addresses message
2019-10-21 14:00:14 +08:00
818d6b2f5a
bootloader: fix compilation problems
2019-10-21 13:28:17 +08:00
8f76a3218e
firmware: move i2c to libboard_misoc, enable IPv6 in bootloader, share network settings
2019-10-21 12:58:52 +08:00
1c5e749036
satman: remove compilation warning without JESD DACs
2019-10-21 12:53:54 +08:00
d26d80410e
runtime: refactor network settings
2019-10-19 17:56:35 +08:00
6d5dcb4211
runtime: enable IPv6. Closes #349
2019-10-19 17:20:33 +08:00
05e8f24c24
sayma2: JESD204 synchronization
2019-10-18 23:28:47 +08:00
4df2c5d1fb
sayma: prepare for SYSREF align
...
We will try DDMTD on the AMC first, as this is simpler and perhaps will work on v2 after the power supply fixes.
2019-10-08 12:30:47 +08:00
5ee81dc643
satman: define constants for JdacBasicRequest reqnos
2019-10-08 10:27:04 +08:00
4b3baf4825
firmware: run PRBS and STPL JESD204 tests
2019-10-08 00:10:36 +08:00
ebd5d890f1
satman: check for JESD ready
2019-10-06 23:10:57 +08:00
90e3b83e80
hmc7043: turn on AMC_FPGA_SYSREF1
...
Florent's JESD core won't work at all without.
2019-10-06 22:49:00 +08:00
1bc7743e03
sayma: fix hmc7043 output settings for v2 hardware
2019-10-06 21:50:29 +08:00
a421820a32
sayma: initialize DACs over DRTIO
2019-10-06 21:42:45 +08:00
f8e4cc37d0
sayma_rtm: reset and detect DACs
2019-10-06 20:15:27 +08:00
f62dc7e1d4
sayma: refactor JESD DAC channel groups
2019-10-06 20:15:09 +08:00
c4c884b8ce
ad9154: simplify, focus on AD9154 config and do not include JESD
2019-10-06 20:07:02 +08:00
fdba0bfbbc
satman: move now-unrelated hmc830_7043 init away from DRTIO transceiver init
2019-10-06 19:22:46 +08:00
ad63908aff
hmc830_7043: enable_fpga_ibuf -> unmute
2019-10-06 18:13:59 +08:00
5ad65b9d30
hmc830_7043: remove clock_mux
2019-10-06 18:13:27 +08:00
e9b81f6e33
remove serwb
...
DRTIO is a better solution
2019-10-06 18:10:23 +08:00
4e77be0511
firmware: add Cargo.lock header that newer cargo wants
2019-09-17 15:22:14 +08:00
David Nadlinger
6d6f66338b
runtime: Update core config panic_reset command suggestion message
2019-09-10 19:31:19 +01:00
90e8e074cd
firmware: turn errors into &str for remote_i2c as well
...
should resolve breakage on a few targets/variants introduced by PR #1351
2019-08-29 09:05:47 +08:00
71b3c66af9
firmware: conditionally compile has_si5324
...
avoids unused warnings where this module is not used.
2019-08-29 09:04:54 +08:00
afe162ceca
firmware: don't unwrap() but propagate pca9548 errors
2019-08-17 09:15:26 +08:00
a8aabd3815
firwmare: turn i2c errors into &str
2019-08-17 09:15:26 +08:00
8fc5ce902f
firmware: let kasli obtain default hardware_addr from i2c_eeprom
2019-08-17 09:15:26 +08:00
d666f3d573
firmware: factor out mod pca9548 from si5324
...
orepares for further i2c devices.
2019-08-17 09:15:26 +08:00
5a9bb0ecba
runtime: fix incorrect 'RTIO clock failed' report
2019-06-24 23:33:13 +08:00
whitequark
b8b9fa51bd
libdyld: accept objects with no rela relocations.
2019-06-17 06:43:34 +00:00
53c778ae2d
runtime: fix previous commit
2019-06-14 15:53:01 +08:00
a947867887
runtime: support Kasli Si5324 bypass via rtio_clock=e
2019-06-14 15:48:05 +08:00
66a66b03b4
style
2019-06-14 15:29:16 +08:00
87ce24e867
runtime: refactor startup and RTIO clocking initialization
2019-06-14 15:26:30 +08:00
43e58c939c
sayma: drop MasterDAC
...
This seemed like a good idea then, but it introduces complexity, corner cases, and additional testing difficulties.
Now Sayma works fine with Kasli as a master, which is simpler.
2019-06-14 14:06:16 +08:00
b04e15741b
drop SI5324_SAYMA_REF
2019-06-14 14:03:48 +08:00
874542f33f
add Metlino support
2019-05-19 10:57:43 +08:00
David Nadlinger
4d215cf541
firmware: Add Si5324 config for 125 MHz ext ref
...
PLL divider settings as suggested by DSPLLsim 5.1.
2019-04-15 22:22:19 +01:00
David Nadlinger
cd7a5a3683
firmware: Fix kernel RPC handling of zero-size values (e.g. empty arrays)
2019-03-31 18:33:44 +01:00
David Nadlinger
b4ddf4c86b
firmware: Make "unexpected reply from kernel CPU" log messages unique
...
This makes it easier to localize issues based on the log output.
2019-03-31 18:31:56 +01:00
David Nadlinger
8e225433a5
firmware: Fix kernel RPC strings size (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
b8ff627be9
firmware: Fix kernel RPC tuple size calculation (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
c7205ad82f
sayma_rtm: preliminary v2 support
2019-03-23 12:37:03 +08:00
b56c7cec1e
kasli: use 100MHz RTIO and 800MHz Urukul frequencies on Berkeley target
...
Urukul sync is not reliable at 125/1000
2019-02-05 11:24:45 +08:00
ec230d6560
sayma: move SYSREF DDMTD to the RTM
...
Put RTM Si5324 into bypass mode before running.
Needs rework to cut RTM Si5324 reset trace.
Needs rework to fix LVDS termination on RTM R310/R313 and R314/R315.
Needs uFL jumper cables between RTM "REF LO DIAG" and "CRD AUX CLKIN" (sic).
2019-01-31 20:39:33 +08:00
82106dcd95
si5324: add bypass function
2019-01-31 19:38:55 +08:00
8bbd4207d8
si5324: use consistent bitmask
2019-01-31 19:35:56 +08:00
d3c608aaec
jesd204sync: reset and check lock status of DDMTD helper PLL in firmware
2019-01-31 15:11:16 +08:00
fa3b40141d
hmc830_7043: document sayma clock muxes
2019-01-31 15:10:11 +08:00
ec8560911f
siphaser: bugfixes
...
* Fix integer overflow in degree computation
* Add some phase slips after the first transition to get out of the jitter zone and avoid intermittent short windows
2019-01-30 16:56:38 +08:00
c591009220
sayma: report TSC phase of SYSREF (TSC LSBs on SYSREF rising edge) in SYSREF sampler
...
Better visibility, better diagnostics, allows some changing of SYSREF frequency while keeping the same gateware.
2019-01-29 23:30:01 +08:00
9d0d02a561
jesd204sync: increase tolerance for coarse->final target in calibrate_sysref_target
...
There is plenty of slack (it only needs to meet timing at the RTIO frequency).
2019-01-29 16:48:55 +08:00
ed6aa29897
jesd204sync: print more information on test_slip_ddmtd error
2019-01-29 16:47:29 +08:00
7a5d28b73d
jesd204sync: test SYSREF period
2019-01-28 19:11:38 +08:00
1a42e23fb4
jesd204sync: print DDMTD SYSREF final alignment delta
2019-01-28 18:39:16 +08:00
eebff6d77f
jesd204sync: fix max_phase_deviation
2019-01-28 18:38:18 +08:00
b9e3fab49c
jesd204sync: improve messaging
2019-01-28 18:37:46 +08:00
145f08f3fe
jesd204sync: update SYSREF S/H limit deviation tolerance
...
Follows the increased DDMTD resolution.
2019-01-28 18:21:31 +08:00
ba21dc8498
jesd204sync: improve messaging
2019-01-28 18:08:20 +08:00
3acee87df2
firmware: improve DDMTD resolution using dithering/averaging
2019-01-28 16:04:04 +08:00
cfe66549ff
jesd204sync: cleanup DDMTD averaging code
2019-01-28 14:14:50 +08:00
2b0d63db23
hmc830_7043: support 125MHz RTIO
2019-01-28 13:44:08 +08:00
bdd4e52a53
ad9154: support 125MHz RTIO
2019-01-28 13:43:52 +08:00
3b6f47886e
firmware: print more info on DDMTD stability error
2019-01-27 23:06:11 +08:00
74fdd04622
firmware: test DDMTD stability
2019-01-27 20:39:12 +08:00
8254560577
sayma: properly determine SYSREF coarse calibration target
2019-01-27 16:00:36 +08:00
214394e3b0
sayma: reimplement DAC SYSREF autocalibration
2019-01-27 15:28:39 +08:00
fdbf1cc2b2
sayma: rework DAC SYSREF margin validation
...
Previous code did not work when delay range was not enough for two rotations.
This removes autocalibration, to be done later. Uses hardcoded value for now.
2019-01-27 14:17:54 +08:00
7e5c062c2c
firmware: bypass channel divider for HMC7043 DCLK
2019-01-27 11:49:34 +08:00
f73ffe44f9
firmware: implement DDMTD-based SYSREF/RTIO alignment (draft)
...
Mostly works and usually gets the DAC synchronized at 2.4GHz with Urukul across DRTIO.
Needs cleanup and optimization/characterization.
2019-01-27 09:51:24 +08:00
cb04230f86
sayma: SYSREF setup/hold validation demonstration
...
This also removes the standalone target as the ISERDES used
for setup/hold check requires the fine RTIO clock, which in turn
requires a DRTIO transceiver due to the Ultrascale TPWS bug.
2019-01-25 16:58:58 +08:00
3356717316
sayma: DDMTD SYSREF measurement demonstration
2019-01-25 16:00:31 +08:00
4941fb3300
sayma: 2.4GHz DAC clocking (4X interpolation)
...
* gets another clock divider out of the way
* gets one cycle within range of the HMC7043 analog delay alone
* SYSREF/RTIO alignment removed, to be replaced with DDMTD-based scheme
2019-01-25 13:47:04 +08:00
cc9420d2c8
hmc7043: fix divider programming
2019-01-25 11:48:50 +08:00
bbac92442f
sayma: check hmc7043 slip period
2019-01-24 20:13:43 +08:00
f8b39b0b9a
sayma: enable 2X DAC interpolation
...
Seems to work just fine and gets one clock divider out of the way.
2019-01-24 18:28:01 +08:00
390f05f762
firmware: use smoltcp release
2019-01-23 16:15:05 +08:00
a0eba5b09b
satman: support Grabber
2019-01-22 19:36:13 +08:00
2e3555de85
firmware: fix compilation error with more than 1 Grabber
2019-01-22 19:35:46 +08:00
62599c5f91
firmware: use consistent terminology
2019-01-09 13:46:18 +08:00
887cb110a7
firmware: fix default DRTIO routing table
2019-01-08 20:46:53 +08:00
332bd6090f
satman: wait for CPLL/QPLL lock after setting drtio_transceiver::stable_clkin
2019-01-07 17:09:19 +08:00
b5501aaf00
firmware: program I2C switch on Sayma RTM
2019-01-06 14:54:52 +08:00
6e43c41103
firmware: support building without SDRAM
2019-01-05 23:41:30 +08:00
2c3510497b
firmware: fix not(has_spiflash) build
2019-01-05 23:40:03 +08:00
a93fdb8c9d
drtio: disable all destinations in gateware at startup
...
Otherwise, kernels fail to get a RTIODestinationUnreachable exception when attempting
to reach a DRTIO destination that has never been up.
2019-01-04 23:42:12 +08:00
d6a3172a3e
update copyright year
2019-01-03 20:21:34 +08:00
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
David Nadlinger
e608d6ffd3
coredevice, firmware: Add rtio_input_timestamped_data
...
Integration tests to follow as part of an RTIO counter phy that
makes use of this.
2018-12-15 00:35:04 +00:00
David Nadlinger
8e30c4574b
firmware: Treat timestamps consistently as signed [nfc]
...
This matches other functions and the ARTIQ Python side, but
isn't actually an ABI change.
2018-12-15 00:02:18 +00:00
David Nadlinger
d4c393b2a8
firmware/ksupport: Update cfg(not(has_rtio)) stub signatures
...
This fixes up 8caea0e6d3
2018-12-11 01:22:48 +00:00
1b841805f6
Merge branch 'master' into new
2018-11-16 15:20:32 +08:00
d3483c1d26
kasli: fix SDRAM read delay reset/wrap issue. Closes #1149
2018-11-15 19:40:35 +08:00
whitequark
248c1cf7dc
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-13 00:58:20 +08:00
whitequark
68aad3e482
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-13 00:57:09 +08:00
whitequark
dd829afebd
firmware: fix another TOCTTOU race in sync/async RPC code.
2018-11-12 15:42:07 +00:00
whitequark
583bba8777
Revert "firmware: workaround for RPC failures"
...
This reverts commit 59033d2588
2018-11-12 15:36:36 +00:00
whitequark
0edae64afb
firmware: fix TOCTTOU race in sync/async RPC code.
...
Before this commit, the main loop in session code was laid like:
1. process_kern_queued_rpc
2. process_host_message
3. process_kern_message
If a host message (such as an RPC reply) caused the kernel to exit,
then any async RPCs would not complete, since RunFinished immediately
shuts down the kernel.
Fix this by reordering 1 and 2.
2018-11-12 15:30:59 +00:00
59033d2588
firmware: workaround for RPC failures
2018-11-12 19:51:54 +08:00
84a6b3d09b
runtime: fix DMA recording after now-pinning
2018-11-10 14:14:55 +08:00
c990b5e4f1
Merge remote-tracking branch 'origin/master' into new
2018-11-08 20:21:56 +08:00
David Nadlinger
9740032a94
firmware: Fix dma_record_output_wide
2018-11-08 11:06:43 +00:00
8caea0e6d3
gateware,runtime: optimize RTIO kernel interface further
...
* now pinning (TODO: atomicity)
* for inputs, merge request and timeout registers
2018-11-08 18:29:24 +08:00
3d0c3cc1cf
gateware,runtime: optimize RTIO output interface
...
* reduce address to 8 bits
* merge core, channel and address into 32-bit pre-computable "target"
* merge we register into data register
2018-11-07 23:39:58 +08:00
ad0254c17b
Merge branch 'switching125' into new
2018-11-07 22:03:18 +08:00
efd735a6ab
Revert "drtio: monitor RTIOClockMultiplier PLL ( #1155 )"
...
This reverts commit 469a66db61
2018-11-07 22:01:03 +08:00
Florent Kermarrec
3318925f4e
firmware/liboard_misoc/sdram: use similar loops on read_level_scan and read_level for consistent results
2018-10-16 09:40:39 +02:00
469a66db61
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-10-08 14:50:02 +02:00
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
