Commit Graph

297 Commits

Author SHA1 Message Date
whitequark b99eae6b3f session.c: send_rpc_value: fix list serialization. 2015-08-09 20:36:14 +03:00
whitequark d4270cf66e Implement receiving data from RPCs. 2015-08-09 20:17:00 +03:00
whitequark 02b1543c63 Implement receiving exceptions from RPCs. 2015-08-09 16:16:41 +03:00
whitequark 153592f1cc Naming. 2015-08-09 02:25:58 +03:00
whitequark b26af5df60 Implement sending RPCs. 2015-08-09 02:17:19 +03:00
whitequark 27d2390fed Add zero-cost exception support to runtime and host. 2015-08-08 16:01:31 +03:00
whitequark 1d61e446cb session.c: ensure session reset on out buffer overrun during RPC. 2015-08-08 14:12:28 +03:00
whitequark f5ea202e25 session.c: bring back session_ack_{consumed,sent}.
These (called session_ack_{data,mem} before) were removed in error.
2015-08-08 14:06:11 +03:00
whitequark 4efae2b67d Formatting. 2015-08-08 13:48:25 +03:00
whitequark ecdebc0b8a session.c: refactor. 2015-08-08 13:21:43 +03:00
whitequark b6e2613f77 runtime: avoid spurious error messages. 2015-08-07 11:03:36 +03:00
whitequark b5cf1e395d runtime: avoid race condition when running kernel.
Also, don't bother passing kernel name: entry point is already
recorded in DT_INIT when the kernel is linked.
2015-08-07 08:51:33 +03:00
whitequark 98cd4288c1 artiq_personality: cast exception params so that %lld is always valid. 2015-08-06 08:25:53 +03:00
whitequark 722dfef97b artiq_personality: simplify. 2015-08-06 07:59:15 +03:00
whitequark 62fdc75d2d Integrate libdyld and libunwind.
It is currently possible to run the idle experiment, and it
can raise and catch exceptions, but exceptions are not yet
propagated across RPC boundaries.
2015-08-02 15:43:03 +03:00
whitequark 6db93b34e8 artiq_personality: port to device. 2015-08-02 06:34:11 +03:00
whitequark aae2923c4c runtime: add lognonl{,_va} functions.
The kernels have print(), which prints aggregates (such as
arrays) piece-by-piece, and newlines would interfere.
2015-08-02 06:33:12 +03:00
whitequark cd294e2986 artiq_personality: avoid unaligned loads. 2015-08-02 06:28:58 +03:00
whitequark 697b78ddf2 Rename {kserver → net_server}.{c,h}. 2015-07-30 13:45:57 +03:00
whitequark fd46d8b11e Merge branch 'master' into new-py2llvm 2015-07-29 12:52:19 +03:00
whitequark c40ae9dbd3 MiSoC is not built with -fPIC anymore, remove support code for that. 2015-07-29 12:40:46 +03:00
Robert Jördens 67715f0d2e pipistrello: only put serdes on the lower ttls
this setup is getting a bit power hungry.

pmt0, 1 (rtio channels 0, 1): 4x in and out
ttl0, 1 (rtio channels 2, 3): 4x out
ttl2 (rtio channel 4): 8x out
2015-07-28 12:54:31 -06:00
Robert Jördens 9dfbf07743 pipistrello: use 4x serdes for rtio ttl
pipistrello: do not wait for lock on startup

LCK_cycle:6 was added in 6a412f796e1 (mibuild). It waits for _all_
DCM and PLLs to lock (probably irrespective of STARTUP_WAIT).
2015-07-28 12:54:27 -06:00
Sebastien Bourdeauducq 8e391e2661 kc705: generate 10MHz clock on GPIO SMA
For SynthNV and input tests.
2015-07-28 18:56:47 +08:00
Robert Jördens 1809a70f5c Revert "pipistrello: use 4x serdes for rtio ttl"
This reverts commit 8e92cc91f5.

Broken. Will revisit.
2015-07-27 23:39:35 -06:00
Robert Jördens f0a7078336 Revert "rtiocrg.c: pipistrello also has pll_reset"
This reverts commit bdee914828.
2015-07-27 22:18:45 -06:00
Robert Jördens bdee914828 rtiocrg.c: pipistrello also has pll_reset 2015-07-27 22:14:42 -06:00
Robert Jördens e95b06e96d pipistrello: tie unused dds.p low 2015-07-27 21:48:56 -06:00
Robert Jördens 8e92cc91f5 pipistrello: use 4x serdes for rtio ttl 2015-07-27 21:29:50 -06:00
Sebastien Bourdeauducq ae3a52c49c runtime: fix KERNELCPU_PAYLOAD_ADDRESS 2015-07-28 02:12:14 +08:00
whitequark eec4a2d2d2 Update buildsystem to track -fPIC and ranlib removal in MiSoC. 2015-07-27 21:10:46 +03:00
Sebastien Bourdeauducq 0cd74533ca runtime: more explicit message about startup clock failure 2015-07-28 00:38:38 +08:00
Sebastien Bourdeauducq 7feaca7c7c runtime: allow selecting external clock at startup 2015-07-28 00:19:07 +08:00
Sebastien Bourdeauducq 09d837e4ba runtime: monitor RTIO clock status 2015-07-28 00:05:24 +08:00
Sebastien Bourdeauducq 299bc1cb7e kc705: output divided-by-2 RTIO clock 2015-07-27 20:46:44 +08:00
Sebastien Bourdeauducq 256e99f0d7 kc705: crg cleanup 2015-07-27 20:31:37 +08:00
Sebastien Bourdeauducq 2a95e866aa kc705: use 8X SERDES RTIO PHY 2015-07-27 20:12:17 +08:00
Sebastien Bourdeauducq fe57308e71 runtime: support for RTIO PLL 2015-07-27 20:11:31 +08:00
whitequark 244ace19e1 Add artiq_raise_from_c macro. 2015-07-27 13:56:18 +03:00
whitequark edffb40ef2 On uncaught exception, execute finally clauses and collect backtrace. 2015-07-27 13:51:24 +03:00
whitequark 2939d4f0f3 Add tests for finally clause and reraising. 2015-07-27 12:36:21 +03:00
whitequark a83e7e2248 Add tests for exceptional control flow. 2015-07-27 10:22:28 +03:00
whitequark 7c77dd317a Implement __artiq_personality. 2015-07-27 09:10:20 +03:00
Sebastien Bourdeauducq 117b361a06 Merge branch 'master' of github.com:m-labs/artiq 2015-07-27 11:42:29 +08:00
Sebastien Bourdeauducq 3573fd02a6 targets/kc705: add TIG constraints for ISE 2015-07-27 10:58:19 +08:00
Sebastien Bourdeauducq fe6a5c42df rtio: remove unused clk_freq argument 2015-07-27 10:57:15 +08:00
Sebastien Bourdeauducq d3f05e414a runtime: account for RTIO_FINE_TS_WIDTH in time buffers 2015-07-27 10:50:25 +08:00
whitequark bb5fe60137 Implement exception raising. 2015-07-27 05:46:43 +03:00
whitequark ef4a06a270 Merge branch 'master' into new-py2llvm 2015-07-27 04:57:32 +03:00
whitequark 14c7b15785 Add a test harness for exceptions.
The libunwind.h is duplicated here so that it would be possible
to test the Python parts without pulling in misoc.
2015-07-27 04:18:12 +03:00