forked from M-Labs/artiq
1
0
Fork 0
Commit Graph

548 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq c8cd830118 drtio: implement get_rtio_destination_status for kernels 2018-09-15 19:11:22 +08:00
Sebastien Bourdeauducq d38755feff drtio: implement destination state checks on operations 2018-09-15 15:55:45 +08:00
Sebastien Bourdeauducq 95432a4ac1 drtio: remove old debugging features 2018-09-12 13:01:27 +08:00
whitequark a74958f01f ksupport: raise RuntimeError on reraise with no inflight exception.
Fixes #1123.
2018-08-07 05:53:13 +00:00
Chris Ballance 6fc8439399 tweak moninj to allow old dashboard with new firmware 2018-08-02 19:34:14 +08:00
Chris Ballance 47740c8930 share moninj injection state between dashboards
Previously if one dashboard overrode a channel this was not visible on
any other dashboard - the channel appeared to operate normally.
2018-08-02 19:34:14 +08:00
Robert Jördens 7d6a1b528d ad9912: add ftw_to_frequency 2018-08-02 11:19:12 +00:00
Robert Jördens e518a1f1d0 ad53xx: also increase slack after control readback 2018-08-02 11:19:12 +00:00
David Nadlinger 08ee91beb2 ad9910: Clarify chip_select range [nfc]
`assert 3 <= chip_select <= 7` is rather opaque without looking
at the CPLD source code otherwise.
2018-07-30 11:08:17 +01:00
David Nadlinger 6b89106578 ad53xx: Avoid sporadic RTIOUnderflow in init()
I observed sporadic RTIO underflows on Kasli before, by ~2.5 µs,
so 5 µs extra slack should be plenty. No underflows since.
2018-07-28 23:45:48 +01:00
Sebastien Bourdeauducq fb96c1140e grabber: add coredevice driver 2018-07-24 18:06:44 +08:00
Sebastien Bourdeauducq cab0ba408d fmcdio_vhdci_eem: cleanup and document 2018-07-20 09:57:03 +08:00
Sebastien Bourdeauducq 8dfcd463aa fmcdio_vhdci_eem: naming consistency 2018-07-19 15:46:04 +08:00
Sebastien Bourdeauducq fe93a454d6 fmcdio_vhdci_eem: fix direction shift register permutation and polarity 2018-07-19 15:16:21 +08:00
Sebastien Bourdeauducq 8b9a8be12a fmcdio_vhdci_eem: add dirctl word computation functions 2018-07-17 23:27:29 +08:00
Sebastien Bourdeauducq d4d12e264d fmcdio_vhdci_eem: refactor
This allows access to the pin allocation from kernels, which becomes useful
to configure the direction shift register.
2018-07-17 20:13:59 +08:00
Sebastien Bourdeauducq b27fa8964b add variant in identifier string
Also add without-sawg suffixes on Sayma.

Closes #1060
Closes #1059
2018-07-15 17:21:17 +08:00
whitequark 12fde6d34b artiq_coremgmt: fix typo.
Fixes #1056.
2018-06-23 00:36:59 +00:00
Robert Jördens 21a48711ec i2c: refactor common operations 2018-06-18 09:34:09 +00:00
Robert Jördens f9910ab242 i2c: support selecting multiple or no channels
closes #1054
2018-06-15 19:36:37 +02:00
Robert Jördens 735e4e8561 pcu: spelling 2018-06-08 14:39:22 +00:00
Robert Jördens 38971d130a comm_analyzer: fix data without any spi reads
closes #1050
2018-06-06 12:21:42 +02:00
Robert Jördens 5de2d06568 ad53xx/zotino: do not clear power down on overtemp 2018-06-01 13:17:13 +00:00
Robert Jördens 2c344686d9 ad53xx/zotino: enable overtemp shutdown and readback control 2018-06-01 13:06:52 +00:00
Robert Jördens 87d3ac9d25 suservo: swap transfer function parametrization
The integrator is now parametrized through its gain and not the PI
corner frequency. The integrator gain limit is given in absolute gain
units and not relative to the proportional gain.

close #1033
2018-06-01 09:38:18 +00:00
Sebastien Bourdeauducq e408241233 sawg: work around compiler not accepting delay_mu(int32) 2018-06-01 15:42:37 +08:00
Sebastien Bourdeauducq f5d55c6902 sawg: add 1 coarse RTIO cycle between spline resets
This keeps all events in the same SED lane and limits the number of SED lanes required.

Closes #1038
2018-06-01 15:15:24 +08:00
Robert Jördens 22506e849f suservo: clarify timings
close #1027
2018-06-01 06:35:38 +00:00
Robert Jördens a42f774440 suservo: document offset range limits
close #1034
2018-05-31 16:55:44 +00:00
Robert Jördens 36dcea3edf suservo: refactor y_mu_to_full_scale as portable
close #1032
2018-05-31 16:44:14 +00:00
Robert Jördens e136709cac suservo: document gain state
close #1030
2018-05-31 16:36:53 +00:00
Robert Jördens 5dbdc5650c suservo: document set_config and get_status more
close #1028
2018-05-31 16:32:05 +00:00
Robert Jördens e1b0fcc24e suservo: add documentation on settings and setup
close #1015
2018-05-31 16:21:09 +00:00
Robert Jördens 4e863b32a1 coredevice: configurable initial backing state
Several core device drivers maintain a copy of some device state.
Since this copy is not transferred between experiments this backing state
can be different from device state when a new experiment is started.

This commit adds support for injecting initial backing state into
experiments via the device database and sets initial backing state where
known.

ad53xx (zotino): spi2 xfer_duration
novogorny: pgia gains
sampler: pgia gains, spi2 pgia and adc xfer_duration
suservo: pgia gains, spi2 pgia xfer_duration
urukul: cpld cfg (partial: rf_sw), attenuator register
spi2: div/length for xfer_duration

close #1003
2018-05-21 18:55:06 +02:00
Sebastien Bourdeauducq 8513f0b0d4 minor cleanup 2018-05-21 15:35:00 +08:00
Sebastien Bourdeauducq b10d3ee4b4 make RTIO clock switch optional and simplify
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
Robert Jördens bfff755295 urukul: do IO_RST also when blind 2018-05-17 14:48:49 +00:00
whitequark 31c6c79204 firmware: implement an edge profiler.
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
2018-05-16 21:53:53 +00:00
Robert Jördens 99f7672c79 ad53xx: tweak spi readback 2018-05-16 19:08:27 +02:00
whitequark 4d06c1d84b coredevice.CommKernel: modernize. NFC. 2018-05-16 14:40:14 +00:00
whitequark ca93b94aea firmware: move config requests to management protocol.
They were only in session protocol because of historical reasons.
2018-05-16 14:32:49 +00:00
whitequark a39f8d6634 artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt.
(Which no longer exists.)

This also fixes `artiq_devtool hotswap` to work without
an `artiq_devtool connect` running in background.
2018-05-16 14:08:32 +00:00
whitequark d446a3293e frontend: merge core{config,log,boot,debug,profile} into coremgmt. 2018-05-16 14:08:32 +00:00
Robert Jördens a100c73dfe suservo: support pure-I 2018-05-14 18:48:27 +00:00
Sebastien Bourdeauducq e121a81f21 ad9914: fix frequency_to_xftw and xftw_to_frequency 2018-05-14 23:49:00 +08:00
Sebastien Bourdeauducq 80df86f700 ad9914: set_mu_x -> set_x_mu 2018-05-14 23:49:00 +08:00
Robert Jördens 4ddb29fa02 suservo: document class arguments 2018-05-14 15:22:47 +02:00
Robert Jördens 504d37b66b suservo: add SI units functions and document
m-labs/artiq#788
2018-05-14 12:26:49 +00:00
Robert Jördens 4993ceec35 sampler: unroll conversion for speed 2018-05-14 12:26:49 +00:00
Sebastien Bourdeauducq ba1d137d19 ad9914: fix FTW write in regular resolution mode 2018-05-14 18:47:23 +08:00