5f5227f01f
ttl: add timestamp()
2015-07-28 16:20:05 -06:00
e95b66f114
ttl: remove spurious _mu
2015-07-28 16:20:05 -06:00
whitequark
b179430f6b
Specify correct llvmlite branch in installation instructions.
2015-07-28 23:43:07 +03:00
67715f0d2e
pipistrello: only put serdes on the lower ttls
...
this setup is getting a bit power hungry.
pmt0, 1 (rtio channels 0, 1): 4x in and out
ttl0, 1 (rtio channels 2, 3): 4x out
ttl2 (rtio channel 4): 8x out
2015-07-28 12:54:31 -06:00
fb339d294e
serdes_s6: no need to reset
2015-07-28 12:54:31 -06:00
9dfbf07743
pipistrello: use 4x serdes for rtio ttl
...
pipistrello: do not wait for lock on startup
LCK_cycle:6 was added in 6a412f796e1 (mibuild). It waits for _all_
DCM and PLLs to lock (probably irrespective of STARTUP_WAIT).
2015-07-28 12:54:27 -06:00
8e391e2661
kc705: generate 10MHz clock on GPIO SMA
...
For SynthNV and input tests.
2015-07-28 18:56:47 +08:00
1809a70f5c
Revert "pipistrello: use 4x serdes for rtio ttl"
...
This reverts commit 8e92cc91f5
2015-07-27 23:39:35 -06:00
f0a7078336
Revert "rtiocrg.c: pipistrello also has pll_reset"
...
This reverts commit bdee914828
2015-07-27 22:18:45 -06:00
bdee914828
rtiocrg.c: pipistrello also has pll_reset
2015-07-27 22:14:42 -06:00
e95b06e96d
pipistrello: tie unused dds.p low
2015-07-27 21:48:56 -06:00
8e92cc91f5
pipistrello: use 4x serdes for rtio ttl
2015-07-27 21:29:50 -06:00
9ac5bc52d4
rtio: add spartan6 serdes, 4x and 8x
2015-07-27 21:01:15 -06:00
ae3a52c49c
runtime: fix KERNELCPU_PAYLOAD_ADDRESS
2015-07-28 02:12:14 +08:00
whitequark
eec4a2d2d2
Update buildsystem to track -fPIC and ranlib removal in MiSoC.
2015-07-27 21:10:46 +03:00
0cd74533ca
runtime: more explicit message about startup clock failure
2015-07-28 00:38:38 +08:00
228f7c3d61
manual: update xc3sprog download
2015-07-28 00:38:20 +08:00
7feaca7c7c
runtime: allow selecting external clock at startup
2015-07-28 00:19:07 +08:00
09d837e4ba
runtime: monitor RTIO clock status
2015-07-28 00:05:24 +08:00
299bc1cb7e
kc705: output divided-by-2 RTIO clock
2015-07-27 20:46:44 +08:00
256e99f0d7
kc705: crg cleanup
2015-07-27 20:31:37 +08:00
2a95e866aa
kc705: use 8X SERDES RTIO PHY
2015-07-27 20:12:17 +08:00
fe57308e71
runtime: support for RTIO PLL
2015-07-27 20:11:31 +08:00
whitequark
244ace19e1
Add artiq_raise_from_c macro.
2015-07-27 13:56:18 +03:00
whitequark
edffb40ef2
On uncaught exception, execute finally clauses and collect backtrace.
2015-07-27 13:51:24 +03:00
whitequark
2939d4f0f3
Add tests for finally clause and reraising.
2015-07-27 12:36:21 +03:00
whitequark
a83e7e2248
Add tests for exceptional control flow.
2015-07-27 10:22:28 +03:00
whitequark
90be44c596
Add tests for non-exceptional control flow across finally.
2015-07-27 10:13:22 +03:00
whitequark
7c77dd317a
Implement __artiq_personality.
2015-07-27 09:10:20 +03:00
d7138b25f2
examples/ddb: add device aliases for unittests
2015-07-27 12:22:56 +08:00
b1d58bd4c8
rtio: fix replace/sequence_error when fine_ts_width > 0
2015-07-27 12:22:35 +08:00
959b7a7b46
rtio: resetless -> reset_less
2015-07-27 11:46:56 +08:00
117b361a06
Merge branch 'master' of github.com:m-labs/artiq
2015-07-27 11:42:29 +08:00
3573fd02a6
targets/kc705: add TIG constraints for ISE
2015-07-27 10:58:19 +08:00
fe6a5c42df
rtio: remove unused clk_freq argument
2015-07-27 10:57:15 +08:00
5b50f5fe05
rtio/ttl_serdes_7series: use recommended OSERDES T configuration
2015-07-27 10:50:50 +08:00
d3f05e414a
runtime: account for RTIO_FINE_TS_WIDTH in time buffers
2015-07-27 10:50:25 +08:00
whitequark
bb5fe60137
Implement exception raising.
2015-07-27 05:46:43 +03:00
whitequark
ef4a06a270
Merge branch 'master' into new-py2llvm
2015-07-27 04:57:32 +03:00
whitequark
905abd6e27
get-toolchain.sh: be less verbose.
2015-07-27 04:57:13 +03:00
whitequark
47f13bf921
Always load the personality library in JIT testbench, if available.
2015-07-27 04:44:40 +03:00
whitequark
14c7b15785
Add a test harness for exceptions.
...
The libunwind.h is duplicated here so that it would be possible
to test the Python parts without pulling in misoc.
2015-07-27 04:18:12 +03:00
whitequark
862ac1f90d
lit-test/compiler -> lit-test/test.
...
Other directories in lit-test will host various parts of
the test harness.
2015-07-27 04:13:29 +03:00
whitequark
7903889082
Merge branch 'master' into new-py2llvm
2015-07-27 03:29:00 +03:00
d65d303ac6
pipistrello: remove unused constraint kwarg
2015-07-26 17:39:07 -06:00
f68d5cbd73
rtio: forward rtio domain reset to rio and rio_phy domains
2015-07-27 01:52:47 +08:00
940aa815dd
rtio/ttl_serdes: cleanup/rewrite
2015-07-27 01:44:52 +08:00
whitequark
1d9f40833d
Update ldscripts with -fPIC support.
2015-07-26 16:16:48 +03:00
whitequark
d252a00b56
Add prebuilt or1k-linux binutils and or1k llvm for travis.
2015-07-26 14:12:48 +03:00
Yann Sionneau
d90dff4ef1
rtio: add SERDES TTL (WIP)
2015-07-26 17:40:34 +08:00
