atse
6f81a63d12
Remove unused LED parameters
2023-09-20 15:51:37 +08:00
atse
78012f6fdd
flake: Use rust from manifest, not from pkgs
...
Fix the rustPlatform deprecation warnings properly.
2023-09-20 11:29:38 +08:00
atse
bb4f43fe1c
Remove stale reference to channel_state vref
2023-08-22 17:16:25 +08:00
atse
9df0fe406f
Remove VREF in reports
...
Since VREF is an implementation detail, there shouldn't be a need to
include it in reports.
The ChannelState vref is removed along with it as its only use was to
save VREF measurements for later reporting.
2023-08-22 11:40:42 +08:00
topquark12
5ba74c6d9b
README: Correct expected TEC polarity
...
Adhere to the general convention of TECs cooling down with positive
voltages.
2023-08-15 16:37:51 +08:00
atse
6f0acc73b8
Update LED L3 for PID status on every cycle
...
Check if PID is engaged on any channel every cycle, and match the status
with LED L3.
2023-08-10 16:43:19 +08:00
atse
f29e86310d
Update nix repos
2023-08-09 11:23:32 +08:00
atse
b04a61c414
Turn off LED L3 only when all channels have no PID
...
Change the behaviour of LED L3 to turn off only when all channels have
PID disengaged, as opposed to when any channel disengages PID.
Otherwise, when disengaging PID on a Thermostat that has had both
channels engaged in PID, the LED would turn off, even when PID is still
engaged on the other channel.
This lets the LED better reflect the status of the Thermostat as a
whole, as it would stay on as long as PID is engaged on at least one
channel.
2023-08-07 16:09:54 +08:00
atse
cd680dd6cd
README: Correct unit of time in reports
2023-07-20 17:45:16 +08:00
Egor Savkin
e3e3237d2f
Emit warning when current/voltage limits are near zero
...
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-03-23 16:58:05 +08:00
Egor Savkin
570c0324b3
implement support for fan PWM
...
Co-authored-by: Egor Savkin <es@m-labs.hk>
Co-committed-by: Egor Savkin <es@m-labs.hk>
2023-03-22 17:15:49 +08:00
mwojcik
5688b2f1bb
flake: update stm32-eth sha256 hash
2022-03-02 17:21:17 +08:00
mwojcik
1b2f2f3888
update code to use stm32f4xx-hal 0.10.1 API
2022-03-02 17:21:17 +08:00
mwojcik
e6f63ec940
cargo/nix: update rustc, stm32-eth, smoltcp
2022-03-02 17:21:17 +08:00
mwojcik
67446ae99e
cargo/flake: update package versions
2022-03-02 17:21:17 +08:00
topquark12
26ad2f0119
rewrite PID
...
Rewrite of PID according to https://hackmd.io/IACbwcOTSt6Adj3_F9bKuw PID implementation.
To migrate:
- TEC+/- pin polarity has to be reversed.
- Some saved settings might be wiped upon flashing of new firmware, back up settings before upgrade
- Min / Max integral parameters no longer exist
- kp, ki, kd will likely need to be retuned
The software has been tested on hardware with good temperature control stability.
Reviewed-on: M-Labs/thermostat#68
Co-authored-by: topquark12 <aw@m-labs.hk>
Co-committed-by: topquark12 <aw@m-labs.hk>
2022-02-24 20:16:47 +08:00
Alex Wong
69dabf5aa1
update hash
2022-01-24 17:20:32 +08:00
mwojcik
a26cdfabb1
readme: update CI links
2022-01-19 11:37:01 +08:00
mwojcik
4d43709f76
nix flakes support ( #64 )
...
Reviewed-on: M-Labs/thermostat#64
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
2022-01-19 11:13:47 +08:00
Sebastien Bourdeauducq
1c00e732fa
README: minor corrections
2022-01-05 08:22:43 +08:00
Sebastien Bourdeauducq
09082b24a5
README: update build instructions
2022-01-05 08:04:25 +08:00
Sebastien Bourdeauducq
85e8273d51
shell.nix: follow nix-scripts
2022-01-05 07:54:07 +08:00
Sebastien Bourdeauducq
e81c6d1692
README: fix objcopy command
2022-01-05 07:50:53 +08:00
Sebastien Bourdeauducq
1f644fd62c
README: fix nix-scripts folder
2021-07-14 08:43:59 +08:00
Sebastien Bourdeauducq
4f1d865d2b
README: fix Hydra links
2021-07-14 08:42:53 +08:00
topquark12
e6a5c31db6
main.rs refactor to reduce length ( #60 )
...
Move command handling to command_handler.rs to shorten main.rs
Reviewed-on: M-Labs/thermostat#60
Co-authored-by: topquark12 <aw@m-labs.hk>
Co-committed-by: topquark12 <aw@m-labs.hk>
2021-06-07 10:07:05 +08:00
topquark12
a5d8661b10
main: fix handling of incomplete data received ( #55 )
...
Reviewed-on: M-Labs/thermostat#55
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-29 16:18:07 +08:00
topquark12
7cb0ed70be
Reset all TCP sockets before MCU reset ( #53 )
...
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-26 17:45:14 +08:00
topquark12
6b9d61737e
docs: update docs to reflect improved stability performance
2021-01-25 13:51:50 +08:00
topquark12
16844a1dc1
dac: fix inconsistent current output behavior due to repeated sampling of noisy vref
2021-01-25 13:51:50 +08:00
topquark12
96f52ace8b
pytec: simpler default graphs in plot
2021-01-25 13:51:50 +08:00
topquark12
a1a8efd51a
readme: update docs on max_i_neg command and heat flow directions
2021-01-25 13:51:50 +08:00
Sebastien Bourdeauducq
8eb3cc4307
dfu: style
2021-01-18 16:59:13 +08:00
topquark12
f3661ac8e3
dfu: refactor
2021-01-18 16:45:01 +08:00
topquark12
c4e3be1d05
fix pid.rs test, exclude dfu from test
2021-01-16 11:04:24 +08:00
topquark12
cf3ace4d2d
flash_store: get addresses from linker
...
Reviewed-on: M-Labs/thermostat#49
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-13 17:30:12 +08:00
topquark12
f6802635a4
add command to reboot into DFU
...
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-13 11:59:06 +08:00
topquark12
9e4d06fdbc
clarify comment
2021-01-11 16:24:43 +08:00
topquark12
3433881d0f
remove dead code
2021-01-11 14:10:50 +08:00
topquark12
193d54a0a6
pid: anti-windup when compliance voltage reached
2021-01-11 14:00:52 +08:00
topquark12
3067b356c5
channels: add methods to retrieve actual voltage and current of TEC
2021-01-08 16:18:20 +08:00
topquark12
3ba2cc9ddc
channels: voltage measurement refalect actual voltage across TEC
2021-01-08 15:52:35 +08:00
topquark12
1539b624bd
pid: more sensible default parameters
2021-01-08 11:31:33 +08:00
topquark12
5c84b7438b
Integral rescaling
2021-01-08 11:25:01 +08:00
topquark12
cc0126636c
report save success
...
save does not hang, it just did not report save success. Closes #33
Reviewed-on: M-Labs/thermostat#44
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-07 18:01:43 +08:00
topquark12
45b7c4e669
add documentation about PID setup and using Python tools
...
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-07 14:48:39 +08:00
topquark12
73dd6d9154
add PID autotune code
...
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2021-01-06 11:02:52 +08:00
topquark12
e94601f54f
pid: fix derivative calculation
...
Reviewed-on: M-Labs/thermostat#40
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2020-12-29 17:09:03 +08:00
topquark12
8c9e12587f
fix simulation math, provided simulation control loop is stable and passes test, reaching simulation cycle limit before settling fails test
2020-12-28 17:38:10 +08:00
topquark12
7c013ff4a4
PID fixes
...
Flipped error calculation method to correct behavior of kP and kI terms.
Added anti integral windup to integral handling.
Changed how the i and integral term is calculated, to prevent old kI settings from affecting the current i term calculation when kI is being tuned. Especially noticable when kI is set from a non-zero value to zero.
Co-Authored-By: topquark12 <aw@m-labs.hk>
Co-Committed-By: topquark12 <aw@m-labs.hk>
2020-12-26 11:47:21 +08:00