 linuswck
|
172c3e1dfc
|
cleanup boot.rs, thermostat.rs
|
2024-02-01 16:23:52 +08:00 |
|
linuswck
|
ee0ed8ebe7
|
eth: add drivers for init, polling & sending data
|
2024-02-01 16:20:36 +08:00 |
|
linuswck
|
771f2813f7
|
gpio: correct wrong eth pin definition
|
2024-01-31 17:15:32 +08:00 |
|
linuswck
|
4e0d14def2
|
laser: Add driver and fn to get termination status
|
2024-01-30 13:01:33 +08:00 |
|
linuswck
|
f6677d874c
|
LD: Rst LD current at power_up for soft start
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
d391e3a1fb
|
LD: Setting LD output current now ramps up slowly
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
edd30e94a0
|
laser_diode: Add fn to set pd_dark_i
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
ad731c2f15
|
rename pd_mon -> pd_responsitivity
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
9d8a553669
|
pd_mon: add fns to convert between pwr and current
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
e22f424531
|
rm unused cargo config target definition
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
6af0f992d5
|
LdPwrExcProtector: Cleanup
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
f50505feaf
|
Rename Analog_Wdg -> LdPwrExcProtector
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
9ae867cd88
|
max1968: rm redundant adc config
|
2024-01-26 16:56:55 +08:00 |
|
linuswck
|
85b50bf824
|
Analog_Wdg: Finish Power Excursion Protection fns
- Verified to be working
|
2024-01-26 16:56:39 +08:00 |
|
linuswck
|
07ea733b34
|
thermostst: Patch hw related settings for rev0_3
|
2024-01-24 12:25:45 +08:00 |
|
linuswck
|
5bea3f0e5f
|
boot: init analog wdg & power up laser after cfg
- Verified to be boot-able on Rev0_3 board
|
2024-01-24 12:19:07 +08:00 |
|
linuswck
|
af283b17ac
|
laser_diode: use analog wdg fns
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
c3022e9db1
|
Analog_Wdg: Add GPIO init
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
c02181c80c
|
laser diode: Add Analog Watchdog initial commit
- rm pid_state for laser diode
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
095fe8ea69
|
AD7172: Rm deprecated warning for Rev0_2 hw bug
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
a0b67cdb09
|
MAX1968: Patch DacVfb pinout for rev0_3
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
381f25f036
|
AD7172: correct wrong NSS pinout definition
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
c768bdc93a
|
Thermostat: Add fn to calibrate ADC's VDDA
- ADC1 exclusive feature
- Calibrated VDDA val can be passed to other ADCs to adjust gain error
|
2024-01-24 12:18:42 +08:00 |
|
linuswck
|
0d12c902fc
|
pd_mon: Separate ld_power calculation to a file
|
2024-01-24 12:18:37 +08:00 |
|
linuswck
|
3cfdee917a
|
rename current_source -> ld_ctrl
|
2024-01-24 12:16:06 +08:00 |
|
linuswck
|
5f582be143
|
rename ld_drive to laser_diode
|
2024-01-24 12:16:06 +08:00 |
|
linuswck
|
2f7ca2a706
|
Thermostat: Add fns to report status & settings
- Report all system status, PID Settings, NTC parameter, TEC Settings
|
2024-01-24 12:16:06 +08:00 |
|
linuswck
|
ff3d9b790a
|
thermostat: pid_state rename variables
|
2024-01-24 12:16:06 +08:00 |
|
linuswck
|
bc7bf9a6e7
|
rename channel_state -> pid_state
|
2024-01-24 12:16:02 +08:00 |
|
linuswck
|
ca110962f7
|
Thermostat: Add pid_ctrl parms & its related fns
- setup: include the pid_ctrl
- poll_adc: Fetch Temperature and Update PID to set the current output
|
2024-01-24 12:16:02 +08:00 |
|
linuswck
|
d0f226ce03
|
Thermostat: Add default to ChannelState
|
2024-01-24 12:16:02 +08:00 |
|
linuswck
|
f49fd08c69
|
ad7172: impl default for ch_calibration
|
2024-01-24 12:16:02 +08:00 |
|
linuswck
|
ccaf728c75
|
thermostat: Add channel_state mod for PID Control
|
2024-01-24 12:15:57 +08:00 |
|
linuswck
|
3ac287ace2
|
steinhart_hart: Add Steinhart-Hart eq fns
- Port from thermostat firmware
|
2024-01-17 12:20:34 +08:00 |
|
linuswck
|
cdf900a5b6
|
gpio: Add AD7172 phy gpio init
- Will not function on rev0_2 kirdy due to wrong hardware connection
|
2024-01-16 17:36:16 +08:00 |
|
linuswck
|
af8d361b95
|
AD7172: Add AD7172 drivers fns
- Port from Thermostat Firmware
|
2024-01-16 16:19:01 +08:00 |
|
linuswck
|
e355e83d28
|
memory.x: Add comment on the reserved flash sector
|
2024-01-16 15:27:43 +08:00 |
|
linuswck
|
285fc9b5d6
|
memory.x: Reserved Flash Sector 11 for Config
|
2024-01-15 17:44:44 +08:00 |
|
linuswck
|
8c612fc0c9
|
memory.x: RM CONFIG MEMORY area in linker script
- STM32f407 does not have second bank or flash/ Sector 12 unlike F427
|
2024-01-15 17:43:17 +08:00 |
|
linuswck
|
42cd55645c
|
main: Add demo fns to use on-board flash
|
2024-01-15 17:21:48 +08:00 |
|
linuswck
|
d190b8b192
|
flash: Add init boot seq
- Max flash erase time for PSize = 8 and 128KiB Sector is 4s
- Watchdog period is changed accordingly
|
2024-01-15 17:21:06 +08:00 |
|
linuswck
|
74325a3cee
|
flash: Add fns to store data in flash
- Writing to the wrong flash sector can cause MCU to stall
- Only 16KiB out of 128KiB in the sector is used to save RAM for compacting
|
2024-01-15 17:14:58 +08:00 |
|
linuswck
|
709eae8566
|
max5719: Slow down SPI clock
- setting it to 30MHz hang MCU core
|
2024-01-11 17:46:35 +08:00 |
|
linuswck
|
d3e3451d37
|
Add README.md for flashing instructions
|
2024-01-11 17:17:38 +08:00 |
|
linuswck
|
33ff0c3678
|
main: Add demo fns reading all hardware status
|
2024-01-11 17:17:38 +08:00 |
|
linuswck
|
33d9cb45c4
|
ld_drive: Add soft current limit
|
2024-01-11 17:17:38 +08:00 |
|
linuswck
|
8ae27725c6
|
Port PID Controller from thermostat firmware
- Add serde Cargo
|
2024-01-11 17:17:10 +08:00 |
|
linuswck
|
20fc6d6fac
|
rm photodiode folder and its mod.rs
- photodiode related fns are written inside laser diode folder
- as they are closely related
|
2024-01-10 17:51:27 +08:00 |
|
linuswck
|
654964831a
|
boot: Change thermostat boot seq for new setup seq
- Power Up -> Calibrate -> Set the TEC current to some value
|
2024-01-10 10:38:05 +08:00 |
|
linuswck
|
27c7b5929e
|
thermostat: change setup seq
- default power off
- with all params set to default val on hw
- rm calibration from setup
|
2024-01-10 10:38:05 +08:00 |