laser: Add driver and fn to get termination status

src/device/gpio.rs

@@ -82,6 +82,7 @@ pub fn setup(
                 gpiob.pb14.into_push_pull_output(),
             ),
         current_source_short_pin: gpioa.pa4.into_push_pull_output(),
+        termination_status_pin: gpiod.pd7.internal_pull_up(true),
     };
 
     let pd_mon_phy = LdPwrExcProtectorPhy {

src/laser_diode/laser_diode.rs

@@ -174,4 +174,8 @@ impl LdDrive{
     pub fn set_pd_i_limit(&mut self, i: ElectricCurrent){
         LdPwrExcProtector::set_trigger_threshold_v(i / Settings::PD_MON_TRANSCONDUCTANCE);
     }
+
+    pub fn get_term_status(&mut self)->bool{
+        self.ctrl.get_term_status()
+    }
 }

src/laser_diode/ld_ctrl.rs

@@ -1,6 +1,6 @@
 use stm32f4xx_hal::{
-    gpio::{gpioa::*, gpiob::*, gpiod::*, Alternate, Output, PushPull},
-    hal::{blocking::spi::Transfer, digital::v2::OutputPin},
+    gpio::{gpioa::*, gpiob::*, gpiod::*, Alternate, Input, Output, PushPull},
+    hal::{blocking::spi::Transfer, digital::{v2::OutputPin, v2::InputPin}},
     pac::SPI2,
     spi::{NoMiso, Spi, TransferModeNormal},
 };
@@ -15,6 +15,7 @@ use crate::laser_diode::laser_diode::TransimpedanceUnit;
 
 pub trait ChannelPins {
     type CurrentSourceShort: OutputPin;
+    type TerminationStatus: InputPin;
     type Max5719Load: OutputPin;
     type Max5719Cs: OutputPin;
     type Max5719Spi: Transfer<u8>;
@@ -23,11 +24,13 @@ pub trait ChannelPins {
 pub struct LdCtrlPhy<C: ChannelPins> {
     pub dac: Dac<C::Max5719Spi, C::Max5719Cs, C::Max5719Load>,
     pub current_source_short_pin: C::CurrentSourceShort,
+    pub termination_status_pin: C::TerminationStatus
 }
 pub struct Channel0;
 
 impl ChannelPins for Channel0 {
     type CurrentSourceShort = PA4<Output<PushPull>>;
+    type TerminationStatus = PD7<Input>;
     type Max5719Load = DacLoad;
     type Max5719Cs = DacCs;
     type Max5719Spi = DacSpi;
@@ -58,6 +61,10 @@ impl LdCtrl {
         self.phy.current_source_short_pin.set_high();
     }
 
+    pub fn get_term_status(&mut self)-> bool{
+        self.phy.termination_status_pin.is_high()
+    }
+
     pub fn set_dac(&mut self, voltage: ElectricPotential, dac_out_v_max: ElectricPotential) -> ElectricPotential {
         let value = ((voltage / dac_out_v_max).get::<ratio>()
             * (max5719::MAX_VALUE as f64)) as u32;

src/main.rs

@@ -84,6 +84,7 @@ fn main() -> ! {
         info!("pd_mon_v: {:?}", volt_fmt.with(laser.pd_mon_status().v));
         info!("power_excursion: {:?}", laser.pd_mon_status().pwr_excursion);
         
+        info!("Termination Status: {:?}", laser.get_term_status());
         sys_timer::sleep(500);
     }
 }